SPECIAL REPAIRS TO BLDG NO ET- 51 AT ASC CENTRE AND COLLEGE UNDER GE (CENTRAL) BANGALORE

Dismantling of Asbestos Cement Corrugated or Semi-corrugated sheets as in Roof covering complete all as specified and directed by Engr-in-Charge.

Dismantling of boarding of any description and fixed in any position with nails, screws etc complete all as specified and directed by Engr-in-Charge.

Dismantling unframed timber scantling 40 sq cm and over in section in any position complete all as specified and directed by Engr-in-Charge.

Dismantling of battens for tiles, sheets, shingles etc, of any size including tilting fillets in section in any position complete all as specified and directed by Engr-in-Charge.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engr-in-Charge.

Taking down cement plaster on brick or stone walls etc, incl raking out joints, hacking for key scrubbing down with water, etc. complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground GL) as in plinth protection/ hard standing/ floors/ path etc complete all as specified and directed by Engr-in-Charge.

Taking down chowkat or frames with shutter (without taking off shutters from the frame) area exc 1.5 sqm but n.exc 4 Sqm each complete all as specified and directed by Engr-in-Charge.

Taking down chowkat or frames with shutter (without taking off shutters from the frame) area not exc 1.5 sqm each complete all as specified and directed by Engr-in-Charge.

S&F pre-painted galvalume aluminium zinc coating (AZ-150) GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

S&F pre-painted galvalume aluminium zinc coating (AZ-150) GI based plain sheet steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, eaves board fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

S & F second class hard wood 20mm boarding clean sawn with butt joints planed on one side fixed with nails in any situation as in weather boarding, eaves boarding etc complete all as specified and directed by Engr-in-Charge.

All as per serial item No ____ above but fixing only complete all as specified and directed by Engr-in-Charge.

M&L for 2nd class hard wood wrought sawn in as in scantling framed and fixed to walls with screws etc complete all as specified and directed by Engr-in-Charge.

M&L for second class hard wood clean sawn battens at 30 cm centers sectional area exc 5 Sq cm but n.exc 15 sq cm complete all as specified and directed by Engr-in-Charge.

M&L precast cement concrete 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in block masonry with solid blocks, exc 10 cm in width and setting in cement mortar (1:6) complete all as specified and directed by Engr-in-Charge.

M&L precast cement concrete 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in block masonry with solid blocks, not exc 10 cm thick and setting in cement mortar (1:6) complete all as specified and directed by Engr-in-Charge.

M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 incl finished even and smooth (without using extra cement) incl mixing with water proofing compound complete all as specified and directed by Engr-in-Charge. (Note : water proofing shall be measured & paid separately).

M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 incl finished even and smooth (without using extra cement) complete all as specified and directed by Engr-in-Charge.

Supply only integral waterproofing compound of approved make complete all as specified & directed.

M&L 25 mm thick cement concrete type B-0, 1:2:4 (using 12.5 mm graded crushed stone aggregate), as in sub-floor, sub-base, floors and pavings complete all as specified and directed by Engr-in-Charge.

M&L for 18-20mm thick Sadherhali stone slab flooring, steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granit including 15 mm thick screed bed in CM 1:4 and Rounding to edges complete all as specified and directed by Engr-in-Charge.

M&L for 18-20mm thick Sadherhali stone slab for skirting, riser, dado and like jointing in cm (1:3) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granit including 10 mm thick rendering in CM 1:3 complete all as specified and directed by Engr-in-Charge.

M&L for 4mm thick pre-painted E-fibre board, designer/decorative, fixed or laid/inserted to GI snap grid frame size 605x605 mm work for false ceiling hangers with 4mm to 6mm dia. G.I. (length as required) adjusting level, fixed to roof slabs/truss by means of ceilling cleats made out of G.I. flat 40 x 3mm size 60mm long and expansion hold fasteners, 12.5mm dia, 40mm long including necessary demolition/dismentaling of existing unserviceable ceiling boards of any description/thickness and including cover fillets, complete all as specified and directed.

S&F Powder coated aluminium sliding window (three track) frame & shutter with glazed shutter and without wiremesh shutter /skeleton section with the following details :- (i) Aluminium frame section 116x36.50x1.80mm. (ii) Aluminium shutter glazed/skeleton section 50x20x1.50mm thick. (iii) Aluminium grill size 50mmx50mm and 4 to 5mm thick bars complete all as specified. (iv) Fixing arrangements legs in hold fast in walls incl PCC (1:3:6) making goog distributed surfaces complete in originally shape. (v) 4mm thick glass orinary quality and fixed with rubber gasket for with glazed shutter etc. (vi) Stainless steel wire mesh 0.36mm nominal dia avg aperature 1.14mm and fixed with rubber gasket for without glazed shutter etc. (vii) Aluminium disc /bow hanle and locking system complete

S&F in repair Mild steel powder coated body door stopper with hard drawn steel spring, 140mm size fixed to door complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F framed work as in doors or gates Fe-410-w(Gde-E-250)quality B of angle or other section with gusset plates,rails,braces,etc complete drilled for fixing of steel sheeting or other covering.Doors,etc.to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging also fastening and fixing complete all as specified and directed.

M&L for pressed steel frames of size 125x60mm for doors with open or more rebated on the solid rounded or chemfered put together with glue pinned at joints all as specified all as specified.

S&F 30mm thick Flush shutters, solid core construction, with block coard core & plywood face panels commercial type on both side conforming to IS 2202 (Part- I) -1999, including internal liping beading all round fixed as in Door Shutter, Cup board shutter & Kitchen rack complete all as specified and directed .

S &F 35 mm thick second class hard wood factory made glazed and skeleton shutter open rebated and prepared to receive glass, guage etc edge of framing plain chamfered or rounded fitted with cut and mitred beads for securing guage etc size of members of shutter as specified in SSR Part I Section 8 clause 8.24 (a) supplied and fitted to chowkats complete all as specified and directed.

S & F 150 mm long aluminium, anodised, barrel tower bolt (ISI marked) of extruded section and fixed complete all as specified and directed.

S&F 150 mm size aluminium alloy handles (ISI Marked) fabricated type anodised and fixed complete all as specified and directed.

S&F 100 mm size butt hinges, medium weight cold rolled mild steel and fixed complete all as specified and directed.

S&F 300 mm long aluminium alloy, anodised sliding door bolt (ISI Marked) with hasp, staple (bolt type) and fixing clip of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed.

M&L preparation of New Wood or wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L preparation of new or previously untreated steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enemel paint over a coat of red oxide complete all as specified and directed.

M&L for PCC 1:2:4 type B0 (using using 12.50 mm graded aggregate) as in copings, in filling of chowkats/frames etc complete all as specified.

S&F in repairs stainless steel wire cloth, 0.24mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including supply & fix second class hard wooden fillet, wrought, cross sectional area exceeding 3 Sqcm but n.exc 6 Sqcm fixed with nails complete all as directed.

S&F in repair 25mm dia aluminium anodised decorative type curtain rods with ends/stops complete all as specified and directed..

S&F in repair decorative type brackets suitable for 25mm dia curtain rods complete all as specified and directed.

M&L for providing, cement concrete Type B1, 1:2:4 (using 20mm gradded aggregate) as in kerbs/copings etc, as required at site, rounded or chamfered on edges complete all as specified and directed.

M&L preparing old surfaces of wood and wood based materials, of any description and girth, not otherwise described and treated with cresote oil complete all as specified and directed.

M&L preparation of newly plastered surfaces of wall and applying two coats of distemper oil bound over a coat of 1mm thick birla wall care putty over a coat of alkali resitant primer coat on plastered surface complete all as specified.

M&L complete removal of existing treatment of old plastered surfaces of wall and applying two coats of distemper oil bound over a coat of 1mm thick birla wall care putty over a coat of alkali resitant primer coat on plastered surface complete all as specified.

M & L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resisitance as per IS 15489:2004, alkali & fungal resistance dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new or old surfaces complete all as specified.

M & L complete removal of existing treatment and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resisitance as per IS 15489:2004, alkali & fungal resistance dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new or old surfaces complete all as specified.

M&L for 75mm thick PCC (1:3:6) type C-1( using 20mm graded crushed stone aggregate) as in plinth protection laid in alternate bays (n. exc. 2 Sqm each) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight, complete all as specified and directed.

M & L PCC 1:4:8 type D2 (40mm graded agg) 75 mm thick as in sub base of footpath/ sub base of floor etc complete all as specified and directed.

M&L Chequered cement concrete tiles 30cmx30cmx25mm thick with gray cement and pigment, set, jointed and pointed in neat cement slurry in floor including 20mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Material and labour for Plain Cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in coping, benching including weathering slightly rounded or chamfered angles as directed including necessary form work complete all as specified and as directed.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing derviceable tiles to store and rubbish of the premises complete all as specified and directed.

M&L Non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. .

M&L for Glazed ceramic coloured tiles 350x250x7mm/ 450x300x7mm thick on vertical surfaces such as dados and risers to step etc, set and jointed in neat cement slurry and pointed in coloured cement to match the tiles including 10mm thick rendering in CM 1:4 all as specified and as directed.

Dismantling of existing any type water storage tank fixed in any description and stacking at site and S&F new 1000 litres capacity (white colour) rotational moulded polythene water storage tank, (cylindrical vertical with close top) triple layer colour white both inside and outside with top cover including PVC float valve high pressure suitable for 25 mm bore of pipe with polythene float, fixture hoisted and fixed in position where ordered and making necessary connection and testing complete all as directed.

Taking up or down 25mm bore, steel tubing galvanised along with fittings or any other type of pipe and removing complete all as specified and directed.

Taking up or down 20mm bore, steel tubing galvanised along with fittings or any other type of pipe and removing complete all as specified and directed.

S&F 25 mm outer dia CPVC Pipe (ISI Marked) SDR II & plain CPVC SDR II fittings fixed on wall, celing or floors complete all as specified and directed.

S&F 20mm outer dia CPVC Pipe (ISI Marked) fixed complete to wall, celing or floors including taking up or down 15mm bore steel tubing complete all as specified.

S & F in repairs chromium plated health faucet (ABS) with 1 metre long flexible pipe suitable for 15mm bore pipe complete all as specified and directed.

S & F in repair 2 way bib cock double handle with flange, cast copper alloy chromium plated, screwed down, suitable for 15mm bore iron pipe complete all as specified and directed.

S&F in repair 15 mm bore stop valves/angle valve cast copper alloy chromium plated fancy type with long shank and cup, screwed down to iron pipe complete all as specified and directed.

S&F Glass Corner Shelf with 5.50mm thick glass including screws all as specified.

S&F Glass Mirror Shelf with 5.50mm thick glass including screws all as specified.

S&F PVC bathroom mirror cabinet best quality of approximate size 450X350mm fixed to wall using brass screws complete all as directed.

S & F in repairs brass, chromium plated, 15mm bore wall mixer for mixing hot and cold water, screwed down with provision of over head shower and cock for iron pipe and fixed complete all as specified and directed.

S & F in repairs, vitreous China wash down water closet pan (pedestal pattern), white, including connection to outgoing drain and 32mm dia flush pipe, flushing pipe, anti syphonic pipe with and including white PVC seat cover closed pattern with flat bottom and MS chromium plated hinging device including provision of 10 ltr capacity low level PVC Flushing cistern, PVC connection pipe, 15 mm dia, 600 mm long complete including making good damaged/disturbed surfaces complete all as specified and directed.

S&F in repair Vitreous China Wash hand basin , white flat back size 550x400 mm including a pair of mild steel angle iron brackets duly painted, erected/embeded in wall, 15 mm pillar taps, brass, with capston heads, fancy type, chromium plated, 32 mm waste coupling brass chromium plated suitable for wash hand basins & 32 mm dia LDPE PVC waste pipe, PVC connection 15 mm size 450 mm long including cutting hole and pinning in ends making good disturbed portion using cement mortar 1:3 complete all as specified & directed by Engineer-in-charge.

S&F in repair 15mm dia bib tap cast copper alloy with crutch or butter fly handle screwed down screwed for Iron Pipe or brass ferrule and fixed.

S&F in repairs aluminium anodised tubular towel rail, 20mm dia ‘D’ type, 60CM long between flanges complete all as specified and directed.

S&F in repairs CP Soap dish 150mm, fixed to wall with chromium plated brass screws complete all as specified

S&F in rep toilet paper holder with flat recessed type stainless steel complete all as specified.

M&L PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement etc fixed in repair complete all as specified and directed.

S&F in repair 110mm dia PVC (SWR) pipes single socketed in any length with rubber joints fixed to walls etc complete.

S&F in repair 75mm dia PVC (SWR) pipes single socketed in any length with rubber joints fixed to walls etc complete all as specified and directed.

S&F PVC (SWR) bends 110mm dia any radius complete all as specified and directed.

S&F PVC (SWR) bends 75 mm dia any radius complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F Butt hinges 75mm mild steel cold rolled, medium weight complete all as specified and directed. .

S&F 100mm long Aluminium, anodized barrel tower bolts of extruded section complete all as specified and directed.

S&F 100mm long aluminium anodized handles of extruded section complete all as specified and directed.

S & F in repairs brass chromium plated shower rose and arm with or without swivel joints, 100mm size including fixing to iron pipe complete all as specified and directed.

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions seperately) and making good distrubed surfaces of wall, floors, etc. complete all as specified and directed.

M&L for point wiring for following points controlled by one, one way switch with 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade (ISI marked) including 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade (ISI marked) as continuous earth wire in green colour to common earth and connected to earth dolly laid/drawn into and including PVC Concealed conduit (medium duty ISI marked,not less than 20 mm dia) with all fittings such as tee, bends, etc all as per IS, terminated in & including new sunk type pressed steel terminal boxes concealed in wall for mounting fittings like switches, sockets, regulators etc with and including 3mm thick phenolic laminated sheet top cover, complete all as specified and as directed. Note : Cost of cutting/leaving forming chases for conduits, sinking for boxes and making good in CM 1:4 shall deemed to be included in quoted rate of this item. (a) One light point controlled by one 5 Amps switch one way

(b) One Ceiling fan point controlled by one 5 Amps switch one way

(c) One 3 pin socket point 5 Amp on independent board

(d) One 3 pin socket point 5 Amp on same board with other switches.

All as per item No. 2 above but with 2.5sqmm ( Nominal area ) cable with 2.5 Sqmm size copper earth continuity conductor for 3 pin 15 A socket outlet on independent board complete all as specified and directed.

S&F Switch piano, flush button single pole, 5 Amps one way complete all as specified and directed.

S&F Switch socket combination flush type 5 Amp 2 in 1 complete all as specified and directed.

S&F Switch socket combination flush type 5/16 Amps 5 in 1 complete all as specified and directed.

S&F Ceiling rose surface bakelite 65x50mm three terminals including supply and fix PVC square blocks complete all as specified and directed.

S & F of Fan regulator electronic, step & socket type 230 volt, suitable for 1200/1400mm sweep ceiling fan complete all as specified and directed.

S&F in replacement LED tube light fitting of 20 watts 6000K , 230 volt, with aluminium extruded channel powder coated with diffuser for glare free light complete with wall mounting all fixing accessories such as 2 nos of PVC square/round boxes, screws, etc and connecting up with three core flexible copper conductor cable of size 24/0.20 sqmm with all as specified and directed by Engr-in-charge.

S&F in repair 35/36 watt LED Light 2' x 2' LED luminare recessed mounted with polymer diffuser complete with accessories suitable for armstrong/Grid ceiling with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.

S&F bldg security light fittings 1x 35 Watt Ac 230v out door type LED street light with high pressure die cast aluminium and heat ressistent complete with driver, lamp bracket with impact and corrosion resistent including thermal managment in multiple optics complete , IP65/66 and wired with all accessories and including connection up with twine core twisted flexible copper conductor cable with 1.5 M long suitable size all as specified and directed.

S&F street light bracket made out of 25 mm bore GI Light grade 1.00 M long to required shape as in bracket for steet light fittings fixed with two pair of MS flate iron clamp of size 50mm X 6 mm thickness of required shape with nuts, bolts and washers suitable for steel tubular pole including painting of mild steel flate iron surface with two coates of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for Sub main wiring with 2 runs of 4.0 sqmm, single core, PVC insulated & unsheathed cable conforming to IS-694, FRLS, 1100 volts with copper conductor multi stranded drawn in non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 4 sqmm single core PVC insulated & unsheathed copper conductor FRLS Cable as continuos earth wire dolly and connecting to existing main switch board / distribution board of the building as ordered and testing on completion including taking down old submain wiring and type of conduit complete all as specified and directed.

M&L for Sub main wiring with 2 runs of 6.0 sqmm, single core, PVC insulated & unsheathed cable FRLS conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in existing non metallic PVC grey conduit fixed on wall with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 4.0 sqmm single core PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board as ordered and testing on completion including taking down old submain wiring and type of conduit complete all as specified and directed.

S&F in replacement Sheet metal enclosure (ISI marked) distribution board for 415 volts, TPN 4 way Vertical type, double door, Tripal pole and neutral with 200 Amps rated copper bus bar for housing MCB and fixed flush in wall surface, and tested on completion complete all as directed.

S&F in replacement Sheet metal enclosure (ISI marked) distribution board for 240 volts, SPN 8 way horizontal type, Double door, single pole and neutral with 200 Amps rated neutral copper bus bar for housing MCB and fixed flush in wall surface, and tested on completion complete all as directed.

Supply and fix in repair MCB Tripple pole & neutral 40 to 100 Amps 415 volts, C series,10 kA rupturing capacity providing in DB complete all as specified.

S & F in replacement MCB single pole 6 to 32 Amps 240 volts, 10 kA rupturing capacity providing in DB complete all as specified and directed by Engr-in-charge.

S & F in replacement MCB single pole & neutral 40 Amps 240 volts, 10 kA rupturing capacity providing in DB complete and all as specified.

Taking down ceiling fan dismantling and painting of ceiling fan complete at site with synthetic enamel paint by spraying incl (fittings with filler) one coat after cleaning all dust etc incl connecting up. Provn of twin core cable of suitable size for ceiling rose to connector connecting of earth wire incl replacement of fan capacitor 2.5/3.15 MFD,canopy, bearing/bush, rubber bushes minor nuts bolts screws washers greassing in fan bearing & refix same complete all as directed

Rewinding of ceiling fan with appropriate size of copper enamelled wire including varnishing, heating with proper insulation complete and testing all as specified and directed.

S & F exhaust fan, single phase, 150 mm (6") sweep, plastic body 1200 RPM including fixing of mounting frame in the round/square hole cutting in the wall/ventilator etc, by means of rugged bolts, nuts and washers etc,including connecting with three core copper conductor flexible cord of 0.5 Sqmm cross sectional area of required length from ceiling rose to the porcelain connector block of the exhaust fan, complete all as specified and directed by Engr-in-charge.

Excavation in trenches in soft/loose soil, not exc 1.5 mtr wide and n exc 1.5 mtr in depth; for foundation, laying pipes/elect cables etc, and getting out complete all as specified and directed.

Supply and laying/spreading river sand to required width at bottom and top for cable cushioning complete all as specified and directed.

Supply and lay common burnt bricks size (230mmx115mmx75mm) bricks of sub class B, laid at right angle on the cable complete in trenches for cable protection complete all as directed by Engr-in-charge.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick complete all as specified in soft/loose/hard/dense soil complete all as specified and directed.

Removing excavated materials of soil not exc. 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

S&F mild steel galvanized pipe light grade for protection & passing of LT cable fixed to poles/walls/laid under floor/roads complete including fittings/clamps as required at site all as specified for size of 50mm bore dia complete all as specified and directed.

Supply, fixing in replacement, Testing and commissioning XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables ( heavy duty) with stranded aluminum conductor, 1100Volt grade on walls with fixing acessories of 25 sqmm x 4 core complete all as specified and directed.

M&L, Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6.0mm thick buried directly in ground (earth pit depth not less than 2.25m deep below the ground level) with top edge of earth plate at a depth not less than 1.5m below ground level connected to earth using GI earth wire of 4 mm dia by means of of nuts, bolts and washer and check nuts of GI or steel as shown in electrical plate No.3 of MES SSR-2009 (Part-I) and connected to earth test point all as specified or indicated including testing on completion with and including 15mm bore light grade GI protection pipe 7.5 metre long for earth including PCC (1:2:4) pit with RCC (1:2:4) type B-1 cover, 40mm thick reinforced with 6mm dia MS bars @ 100mm both ways with lifting hooks made out of 6mm dia MS bars, watering arrangement with 20mm dia light grade pipe, funnel, wire mesh, common salt chorcoal, necessary excavation and earth work in any type of soil complete all as specified.