Loading…
Loading…
Tender Value
Refer Docs
Closing Date
28 Nov 2025, 11:30 amClosed
Single Packet
Normal Tender
No
Not Applicable
Itemwise/Consigneewise
Lowest to Highest
CONSIGNEE
Not Applicable
90 days
Expenditure
General
LP
3 conditions
Entire/Bulk order will be placed on the OEM or its authorized dealer having proven performance (Agent shall submit authorization certificate along with the offer). Please upload the past performance of the item along with the Bid in compliance to Para 2.8.5.3.1 of the attached Bid document.
Purchase Preference & Other Benefits To Micro And Small Enterprises MSE will be applicable as per para 1.11 of the attached bid document.
Only Class-I and Class-II local supplier as defined under the order (Revised Public Procurement (Preference to Make in India), Order -2017), shall be eligible to bid irrespective of purchase value except for the items which are restricted to be procured from Class-I local suppliers only, details mentioned in the para 2.24 of attached bid document. Vendors who do not qualify to be Class I or Class II , as the case may be, local suppliers should not quote in the tender as their offers shall not be considered for any ordering. Further, for the for the items restricted to be procured from Class-I local suppliers only (list of such items mentioned in para 2.24 where the Ministry of Railway is the nodal ministry), vendor who does not qualify to be a Class I local supplier for the tendered item participates in the tender it does so at its own risk and cost and Railway shall not be liable for any loss or damage caused to the vendor. Para No. 2.24 of the attached bid document shall be applicable
27 conditions
The bidder confirms that rates and other financial terms quoted in relevant columns of financial bid will only be ruling terms of acceptance, and such terms quoted anywhere else shall be ignored. ( Denial of the concision recommended)
Certificate for Compliance of Rule 144 (xi) in the General Financial Rules (GFRs), 2017. I /we have read the Orders regarding restrictions on procurement from a bidder of a country which shares a land border with India vide Order Ref. F. No. 6/18/2019-PPD dtd. 23.07.2020 (containing office Memorandum, order (Public Procurement No. 1) & Order (Public Procurement No. 2). Order Ref F. No. 6/18/2019-PPD dtd. 23.07.2020 (Order (Public Procurement No.3) issued by Joint Secretary (PPD), Department of Expenditure, Ministry of Finance, Gol and OM No. DPE/7(4)/2017-Fin. Part-I dtd. 30.07.2020 issued by the Director, Dept of Public Enterprises, Gol; I/ we hereby certify that I/ we are not from such a country and are eligible to be considered.
In reference to clause above in case the bidder is from a country which shares land border with India vide order reference mentioned in clause 8.1 above, the following confirmation to be provided by the bidder:- I/ we have been registered with the Competent Authority as mentioned in the above Govt. Order dt. 23.07.2020. I/ we hereby certify that, we fulfil all requirement in this regard and are eligible to be considered (where applicable, evidence of valid registration by the Competent Authority shall be attached)
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items.The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Please indicate [Y/N] whether you are interested in availing the benefits available to Micro and small Enterprises[MSEs] of their participation in Govt. Procurement in reference to the Ministry of Railway letter No.2010/RS[G] /363/1 dated 13.02.2019 as mentioned in bid document. If yes, Please attach the requisite registration certificate specifically for the tendered item for the same application issued by appropriate agency. Also indicate whether MSE's is owned by SC/ST/WOMEN/OTHER. The requisite certificate is to be uploaded with tender document. Please note that in absence of the requisite certificate uploaded/ submitted along with the offer , such benefits may not be extended.
EMD and SD as per Clause 1.18 & 1.19 of NER-attached bid document.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
3 locations across Uttar Pradesh, Uttarakhand · 6 Numbers total
PORTABLE DIESEL ALTERNATOR CUM WELDING SET HAVING AUXILARY POWER CAPACITY OF 3KVA, 230V, SINGLE PHASE AC SUPPLY, 50HZ, AND WELDING CAPABILITY OF 175A DC(MIN) WITH DUTY CYCLE OF 60%.
80255807~NER
80255807
Open - Indigenous
Goods
Uttar Pradesh
₹0
Exempted
28 Nov 2025
25 Nov 2025
3 items · 6 Numbers total
PORTABLE DIESEL ALTERNATOR CUM WELDING SET HAVING AUXILARY POWER CAPACITY OF 3KVA, 230V, SINGLE PHASE AC SUPPLY, 50HZ, AND WELDING CAPABILITY OF 175A DC(MIN) WITH DUTY CYC LE OF 60%. THE ENGINE SHALL BE AIR-COOLED, PETROL START AND PETROL RUN WITH AUTO START OR M ANUAL START FEATURES. THE PORTABLE WELDING CUM GENSET SHALL GENERALLY CONFIRM TO IS:2635 ( LATEST) AND ALTERNATOR SHALL CONFIRM TO IS: 4722(LATEST). THE PORTABLE WELDING CUM GEN-SET SHALL MEET THE FOLLOWING REQUIREMENTS. 1)ENGINE-PETROL START AND PETROL RUN, AIR-COOLED 2) START MODE-AUTO OR MANUAL3)AC GENERATOR OUTPUT-230V SINGLE PHASE, 50HZ, 3KVA 4)WELDING C APABILITY-175A(MIN), 65 V DC WITH 60% DUTY CYCLE 5)SUITABLE FOR WELDING RODSIZE-4 MM (MAXIMU M) 6)INSULATION CALSS-F 7)MECHANICAL PROTECTION-IP238)AMBIENT TEMPERATURE-UPTO 55 DEG C 9)A LTITUTE-1000M 10)DRY WEIGHT-100KG (MAXIMUM) 11)OVERALL DIMENSION(LXWXH)- 750X550X675 MM ( MAXIMUM) 12)TROLLEY HAVING WHEELS AND HANDLES FOR EASY MOVEMENT 13)WELDING CABLE 25 SQ MM OF 5M LENGTH WITH WELDING HOLDER AND ACCESSORIES 14)MODEL: SIMILAR TO GE-W 5500R OF M/ s. HIMALAYAN POWER MACHINES NOTE:- 1)THE SUPPLIER SHALL PROVIDE AFTER SALES SERVICE ALL OVER INDIAN RAILWAYS. 2)MAINTENANCE MANUAL SHALL BE SUBMITTED ALONG WITH SUPPLY.TPL NO:39459902 070101 [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/P.Way/BEM, NER | Uttar Pradesh | 2.00 Numbers |
| SSE/PW/CPA, NER | Uttar Pradesh | 2.00 Numbers |
| Total | 4 Numbers | |
D.C HONDA portable welding generator [ Warranty Period: 30 Months after the date of deli very ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/PW/RUPC, NER | Uttarakhand | 1.00 Numbers |
| Total | 1 Numbers | |
Portable DC Welding Generators as per RDSO Spec.no.TM/SM/20 dt.19.11.1992. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/PW/CPA, NER | Uttar Pradesh | 1.00 Numbers |
| Total | 1 Numbers | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
5502067.pdf
ATTACHMENT
5521942.pdf
ATTACHMENT
5502069.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .