Karnataka

To Be Opened

Works

Other Works

Providing and Fixing Borewell to Banatikatta Govt Urdu school at ward no 74

Directorate Of Municipal Administration

DMA City Corporation Hubballi-Dharawada | Dharwad, Karnataka

Amount: ₹6.8 LCloses: 29 May 2026Closed

Timeline

Published15 May 2026
Closed29 May 2026

Tender Value

₹6.8 L

EMD Value

₹20,000

Closing Date

29 May 2026, 9:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Directorate of Municipal Administration

Contact Person

VIJAYAKUMAR R

Office Number

7795455548

Mobile Number

7795455548

Work Description

Providing and Fixing Borewell to Banatikatta Govt Urdu school at ward no 74

Tender Information

Tender ID

DMA/2026-27/OW/WORK_INDENT57960

Reference Number

DMA/2026-27/OW/WORK_INDENT57960

Tender Type

Open

Product Category

Other Works

Form of Contract

Electronic Documents, First(One Cover)

Location

DMA City Corporation Hubballi-Dharawada

Source Website

Subscribe to view

Documents Required

8 documents required · 8 mandatory

Technical Bid

RequiredValid contractor license certificate

RequiredSimilar nature of Work done certificate i e 50 percent of amount put to tender

RequiredLine of Credit 30 percent of amount put to tender

RequiredFinancial Turnover certificate from 2021 22 to 2025 26 obtained and certified by the Registered valid chartered Accountant with UDIN Number details

RequiredGST Certificate

RequiredPAN card

RequiredInformation on works for which Tenders have been submitted A Existing commitments and on going works

RequiredInformation on works for which Tenders have been submitted B Works for which Tenders already submitted

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Department Registration Details

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing work

List of works for which tenders already submitted

Banker Details

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. Tenderers are required to read the bid documents carefully before submission of their bid. The Department is not responsible for any delay caused in accessing the e-procurement portal

Any discrepancies observed in the documents uploaded by the tenderer the submitted tender bid shall be liable to be rejected. The Employer reserves the right to reject any or all Tenders without assigning any reason or what so ever

Tender application amount shall not be refundable. Royalty on construction materials and other taxes will be deducted as per prevailing Govt, orders as may be modified from time to time

The tenderer shall scan original Workdone certificates Turnover Statements and any other documents specified by the employer and attach the scanned file to the Bid. The Original Documents shall be produced for physical verification within one week from the date of Technical bid opening

If the quoted bid amount is less than the tendered amount, the difference in amount shall be remitted in the from of FDR DD Bank Guarantee in the name of Commissioner HDMC Hubli from any of the Nationalized Banks/Scheduled Banks and shall only be returned/refunded after the Completion of the Defect Liability Period

The Tenders/ Bids are invited as per Standard tender Bid Document KW1 The contractor shall attach all the requisite documents as required in the standard bid document. The Bidders shall abide as per the detailed instructions and conditions contained in standard bid document KW1

The contractors shall collect necessary samples as required & all relevant requisite tests to be got done by the registered institution or firms with consultants with the Third Party.The contractor has to make his own arrangements for procurement of all materials required for completion of the work in all respects. The contractor shall use relevant ISI mark materials for the work and also obtain necessary quality control certificates from the authorized quality control authority

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. List of works for which tenders already submitted and List of existing commitments and ongoing work

The contractor shall carry out the work preferably in 2 shifts to expedite and complete the work in all respects well before the stipulated time. The payments for the wok will be made depending upon the availability of funds. The Applicable GST shall be paid separately

Financial turnover of previous years shall be given a weight age of 10% per year to bring them to the price level of the 2026-27. The Defect liability Period for the work carried out is 360 days (1 years) from DATE OF COMPLETION OF WORK. The time period for completion of the work is 3 months

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹20,000

Important Dates

Last Activity

15 May 2026

Published

15 May 2026

Download Ends

26 May 2026

BOQ Preview

•

Providing and Fixing Borewell to Banatikatta Govt Urdu school at ward no 74

•

Geophysical investigation of site for sinking borewell for supplying drinking water to the habitation elther through the hand pump MWS PWS by vertical electrical sounding by adopting venner or schlumb...

•

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig

•

of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and...

•

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig

•

of capacity 300 PSIG & above 1100 CMF & above in all strata including

•

over burdern upto 20 m. Fixing of casing pipes, collars an...

•

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig

•

of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and...

•

Earth work excavation by manual means for drain,canals waste weir draft approach channels,key trench, foundation of bridges and such similar works, as per drawing and shoring, strutting barricading ca...

•

Supply of ISI mark 175mm nominal bore,plain and steel casing pipe

•

grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and

•

latest ammendments, electrical resistance welded steel tubes,...

•

Providing and laying at site of work MS casing caps as per IS 1239 (part II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum)...

•

providing, supplying to work site, submersible pump set of 150mm dia suitable for bore well and confiming to IS 8034-2000:3phase SS bowl & impeller with low volt motor as per specifications,as per nec...

•

Supply and delivery at site Brand new best make PVC insulated cable of

•

Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990

•

with ISI Mark and as per its latest amendments.1x3x4 ...

•

Supply and delivery at site of brand new best make gate valve as per IS

•

778/1984 with ISI Marks as per ist latest amendents Size 50 mm

•

Supply and delivery at site of brand new best make non-return valve as

•

per IS 778/1984 with ISI marks and as perits latest amendents Size 50 mm

•

Supply, installing,testing and commissioning COMMON control panel

•

consisting of the following INCOMING:1 No set of Phase indicating

•

lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analo...

•

Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at t...

•

Supply and delivery at site delivery of best indigenous brand new MCB

•

(Miniature Circuit Breakers) of required capacity as per IS 88228/1978

•

and its latest amendments and with ISI Mark of 6/10/16/20...

•

Supply and delivery at site 50mm(2”) dia heavy duty unplasticized PVC

•

Column pipes with heavy duty collars,rubber profile ring,vibration

•

control profile ring,freezing and turbulence free leak proo...

•

Supply and delivery at site 50mm(2”) dia heavy duty CI adopter set

•

complete suitable for uPVC Column pipes for Submersible pumpsets

•

Labour charges for Erection, Electrification and commissioning of Pump

•

sets, including aligning and balancing of all items including supply and

•

erection of two pair of supporting clamps, bore well c...

•

Labour charges for erection of indoor type panel board and meter board

•

units with all necessary materials and labour tools and equipments

•

including cement concrete for foundation/bed etc,complete as...

•

Providing main connection from pole PVC insulated sheathed steel wire

•

cable in new trench as per IS 1554/ 1988 with latest amendments with

•

ISI mark from KPTCL pole to meter board unit.

•

Earthing: Providing and fixing and wiring earth electrode for grounding

•

circuits IC cutouts and other equipments on the meter board in the pit.

•

The pits should be filled up with equal proportion of ...

•

Supply and delivery at site wrought middle steel (galvanized) GI elbow

•

confirming to IS 1239-II, 1991 with latest amendments if any for: For 50 mm dia GI elbow

•

Providing wrought mild steel (galvanized) GI collar confirming to IS

•

1239-II, 1991 with latest amendments if any. For 50 mm dia GI collar:

•

Supply and delivery at site wrought middle steel (galvanized) GI union

•

confirming to IS 1239-II, 1991 with latest amendments if any For 50 mm dia GI Union

•

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest

•

amendments and conveying to worksite, rolling and lowering into

•

trenches, laying true to line and level and perfect linking at joi...

•

Providing and constructing stand post 1.22m x 1.22m size for public

•

fountain with R.C.C. post of size 1.22m x 0.38m x 0.10m with top rounded and R.C.C. curb slab of size 1.22m x 0.30m x 0.05m in CC 1...

•

Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of

•

variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865

•

with the latest amendments and of grade GGG 40/50, shaft...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

format of bankers certifiate.pdf

Instructions to Tenderers • 0.37 MB

government notification.pdf

Instructions to Tenderers • 1.75 MB

kw-1 57960.doc

Tender Document • 1.01 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].