ADDN/ALTN AND SPECIAL REPAIRS TO CERTAIN WASHROOMS AT WED MANKHURD AND PROVN OF DRAIN AND ALLIED SERVICES NEAR BLDG NOS P-15, P-39, P-40, P-42, P-43 AND P-54 IN DEFENCE COLONY MANKHURD UNDER GE (NW) MANKHURD

Amount

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

M&L for 12 mm thick polymer modified ready mix cement based plaster on the wall surfaces including finishing the surfaces of even and smooth, complete all as specified and directed, Make : Easy plast from M/s ceiling plast or chemplast or Readiplast from ultratech. Note : The thickness of plaster specified above is the minimum thickness and the quoted rates shall also be deemed to include for provision of dubbing of the surfaces with the ready mix plaster and nothing extra shall be payable on this account.

M & L for rendering 5 mm thick using polymer modified ready mix cement based plaster on the ceiling surfaces including finishing the surface of top layer even and smooth complete all as specified and directed. Make: easyplast from wall plast/readiplast from ultratech Note: The thickness of plaster specified above is minimum thickness and the quoted rates shall also deemd to be include for the provision of dubbing of the surface and nothing extra shall be payable on this account. The rate also includes the rate of scaffolding and necessary safety measures

M&L for 20mm thick (12mm + 8mm) in two coats polymer modified ready mix cement based plaster on the wall surfaces including finishing the surfaces of top layer even and smooth, complete all as specified and directed, Make : Easy plast from M/s wall plast or chemplast or Readiplast from ultratech. Note : The thickness of plaster specified above is the minimum thickness and the quoted rates shall also be deemed to include for provision of dubbing of the surfaces with the readi mix plaster and nothing extra shall be payable on this account.

M&L for preparing of new plastered or unplastered surfaces and applying three coats of white wash on ceiling etc complete all as specified & directed

M&L for preparing of old surface of ceiling and applying one coats of white wash etc complete all as specified & directed

M&L for preparation for applying two coats or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resisitance as per IS 15489:2004, alkali & fungal rsistance, dirt resistance exterior paint of required shades(Company Depot Tinted) with silicon additives @ 1.43 litre/10sqm over & including priming coat of extreior primer applied @ 0.90 litre/10 sqm over new surfaces etc complete all as specified & directed

M&L for preparation of old surface of wall and applying one coats of white wash etc complete all as specified & directed

M&L for preparation of untreated plastered surface of wall and applying three coats of white wash etc complete all as specified & directed

Taking down aluminium windows alongwith with shutters (without taking off shutters from the frame) .incl taking down deco grill and refixing the same after cleaning, repairing, changing of locks,rubber beading, rollers etc complete all as specified & directed

Taking down chowkhats n exc 1.5 sqm without taking off shutters from frame etc complete all as specified & directed

Taking down chowkats or frames with shutters (without taking off shutters from the frame) exceeding 1.5 sqm each etc complete all as specified & directed

S&F aluminium anodized window / door / partition shutters and frame, any type (sliding / non-sliding / openable), , fabricated, medium weight, including all necessary fittings / fixtures for door/partitions, etc., cleats suitable locking arrangements and arrangement to receive and fixing glass / wire cloth, etc. with aluminium beading, glazing cleats, and cadmium plated stainless steel screws including rubber gaskets, beading, etc. complete all as specified and as directed by the Engineer-in-charge Note:- (i) Weight of rubber gasket and beading, handles, rollers, etc shall not be considered when measuring weight of aluminium shutter / frame . (ii) Glass / wire mesh shall be measured and paid separately.

Supply only 5mm thick glass pin headed ordinary quality in each pane for aluminimum sliding/openable window etc complete all as specified & directed

S&F for polycarbonate plain sheet twin wall section with thickness not less than 5mm fixed in aluminium frames including necessary fixing arrangement etc complete all as specified & directed Note : Aluminium frame shall be measured and paid separately

M&L for machine cut cudappah stone slab 20-25 mm thick laid over 15mm thick cement rendering in CM 1:4 as in cills,jambs of window , platform laid and jointed with grey cement slurry mixed with pigments to match the shade of the slab including rubbing and polishing, rounding of edge, cutting opening for sink & wash basins etc complete all as specified & directed

S&F in repair 5mm thick glass pin headed ordinary quality in each pane for aluminimum sliding window area exc 0.5sqm in each pane including taking down joinery and refixing in the same positioncomplete all as specified & directed by Engineer-in-Charge.

M&L aluminium anodised (white or tint as approved) grill of design DG-104 pattern (10X5.2mm), fixed with anodised aluminium 'F' /'u'sections to aluminium window / ventilators, etc. all as per manufacturer's instructions etc complete all as specified & directed. Notes: (i) Make shall be of M/s Decogrille of M/s Associated Groups or equivalent as approved by the GE (ii) Minimum thickness of anodising shall be 15microns.

Dismantling of stone slabs and tiles of any description or thickness in floors, arpons etc. laid bedded and pointed in any mortar etc complete all as specified & directed.

M&L for Coloured glazed ceramic tiles, coloured (450 x 300mm) x 7mm thick on vertical surfaces such as skirting dados etc over and including backing coat 10mm thick in CM 1:3 etc complete all as specified & directed.

M&L for coloured Non-skid ceramic tiles 7 to 8mm thick (square/ rectangular) of approved size, area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, over and including 15 mm thick cement mortar screed bed in CM 1:6 etc, complete all as specified and directed.

S&F in repairs vitreous white China Europeon water closet (Pedestal Pattern) including 10 ltr capacity low level flushing cistern with seat cover & necessary conneictions, fitting & fixtures etc complete all as specified & directed

S&F in repairs vitreous china squatting pan orissa pattern of size 580x440mm white with integral foot rest and including 10 Ltr capacity low level flushing systern with flexible pipe and necessary connection, fittings & fixtures etc complete all as specified and directed

S&F in repairs vitreous china urinal bowl type (back or corner wall type ) of size 465 x 355 x 265mm complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement with discharge pipe etc complete all as specified & directed

S&F in repair vitrous china urinal partition white of 310X700mm (cera/ hindware/parryware) etc complete all as specified & directed

S&F in repairs vitreous China wash basin white, flat back size 550 x 400mm including 15mm dia fancy type pillar tap, chromium plated CP waste coupling, chain and plug, waste fitting, union and waste pipe 32mm dia of required length and all necessary 450mm long outlet and inlet PVC connections pipes with PTMT check nuts etc complete all as specified & directed

S & F Vitreous China white, 1st quality,under counter wash basin oval type of size 560 x 470 mm including fixing to counter,CP brass fittings, waste coupling , union, cutting for and pinning ends etc complete all as specified & directed Make: Cera Oval /equivalent of parryware

S&F in repairs PVC connection 15mm size with PTMT nut of length 450 mm etc complete all as specified & directed

Taking down 15mm boreGI tubing and connections including fittings etc complete all as specified and directed

Taking down 20mm boreGI tubing and connections including fittings etc complete all as specified and directed

Taking down 25mm boreGI tubing and connections including fittings etc complete all as specified and directed

S&F 20mm bore GI tubing medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floors etc complete all as specified and directed.

S&F 25mm bore GI tubing medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floors etc complete all as specified and directed.

Supply & fixing 20mm CPVC pipes UV stable,leak proof, tough ,rigid , conforming to IS:15778 of SDR 11 standard., medium grade with and including all fittings and fixed to walls and ceilings or laid in floors, etc complete all as specified & directed

S&F in repairs 15mm bore stop valves, cast copper alloy,type chromium plated, screwed down, high pressure , screwed both ends for iron pipe or for unions etc complete all as specified & directed

S&F 15mm bore angle cock, cast copper alloy,Push type chromium plated, screwed down, high pressure , screwed both ends for iron pipe or for unions etc complete all as specified & directed. Make : Essco or equivalent

S&F in repairs pillar taps suitable for counter washbasin, cast copper alloy, chromium plated, screwed down, high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe of 15mm bore, complete all as specified and directed. Make : Essco or equivalent

S&F Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed etc complete all as specified & directed

S&F in repairs 15 mm bore bib tap, cast copper alloy chromium plated, fancy type etc complete all as specified & directed Make : Essco or equivalent

S&F 15mm cast copper alloy chromium plated two way bib cock etc complete all as specified & directed Make : Jaguar CON-041KN/equivalent

S&F hand shower (health faucet) including 1.2 metre length easy flex tube in chrome finish including wall hook and connected fittings etc complete all as specified & directed. Make- Jaquar cat No ALD-573 or equivalent of Marc /Kohler.

S&F in repairs PVC soil, waste and vent pipes 110 mm bore in any length with ears with and including lead joints laid in treanches or in floors or fixed to walls etc complete all as specified & directed

S&F in repairs PVC soil, waste and vent pipes 75mm bore in any length with ears with and including lead joints laid in treanches or in floors or fixed to walls complete all as specified and directed.

S&F in repairs PVC waste pipe 40mm bore 90cm long with coupling spring type etc complete all as specified & directed

S & F PVC bends 75 mm dia with/without oval opening etc complete all as specified & directed

All as per Item No 45.00 above but branch pices single/double 75mm etc complete all as specified & directed

S&F PVC bends 110mm dia with/without oval opening etc complete all as specified & directed

All as per Item No 47.00 above but branch pices single/double 110mm etc complete all as specified & directed

S&F in repairs chrome finish tubular towel rail, 20 mm dia `D' type, 60 cm long between flanges including CP brass screws and wooden/plastic cleats as required etc complete all as specified & directed

S&F in repairs PVC pipe 40mm dia in any position at any level all as directed including bend, tee, Y etc

S&F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plan colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing etc complete all as specified & directed

S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing etc complete all as specified & directed

Supply and fix stainless steel butt hinges of size 100mm, etc complete all as specified & directed

S&F 200 mm long aluminium anodised barrel tower bolts of extruded section etc complete all as specified & directed

S&F 150 mm size extruded aluminium alloy handles, fabricated type, anodised etc complete all as specified & directed

Demolition of brickwork or stone masonry built in cement mortar etc complete all as specified & directed

Demolition, of concerte in ground floors and paving n .exc 15cm thickness in cement mortar etc complete all as specified & directed

Demolition, of reinforced concerte in roofs ,floors (other than ground floors)beam, stair case ,landing cement mortar etc complete all as specified & directed

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in hard/dense soil etc complete all as specified & directed

Excavation in trenches,n.exc 1.5m wide and n.exc 1.5m in depth for foundation etc and getting out in hard/dense soil etc complete all as specified & directed

M&L for PCC (1:4:8) type D2 (using 40mm graded stone aggregates) as in foundations, filling and mass concrete etc, complete all as specified and directed.

M&L local bajri filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled and rammed including watering etc complete all as specified & directed

M&L for pre cast cement concrete block masonary (1:3:6) Type C1 (20mm garaded aggregate) with solid blocks ,exc 10cm in width and setting in mortar (1:6) etc complete all as specified & directed

Returning, filling including spreading, leveling watering and well ramming in layers n.exc 25cm in hard/dense soil etc complete all as specified & directed

Removing excavated material to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point etc complete all as specified & directed

M&L broken stone or boulders hardcore of gauge n.exc 63mm, deposited, spread and levelled and well rammed in layers n exc. 15 cm thick, watered and rammed to a true surface etc complete all as specified & directed.

M&L for providing, precast cement concrete type B1 1:2:4 set on cement mortar 1:6 in window or door cills, lintels, bressummers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc.(of any section indicated), with plain fair faces, including chamfers weatherings, throating etc. and setting in mortar complete with joints to match etc complete all as specified & directed

M&L for cement concrete type B1 1:2:4 (using 20mm graded aggregate) in lintels upto 1.5 mtr clear span, cils, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and raiing upto 60 cm in height, copings, kneelers, apex stones, bed plates/blocks, water troughs and the like including weathering, slightly rounded of chamfered angles and throating etc complete all as specified & directed

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified & directed

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified & directed

S&F Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc complete all as specified & directed.

S&F Fe 410 W Gde E-250 Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment etc complete all as specified & directed

M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of primer etc complete all as specified & directed

S&F in repairs chromium plated shower rose 125mm size for fixing in 15 dia pipe etc complete all as specified & directed

S&F in repairs Soap dish, chromium plated etc complete all as specified & directed

S&F in repairs 15 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed etc complete all as specified & directed

S&F in repairs 25 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed etc complete all as specified & directed

Chipping , Removing,Carefullly Loose Concrete work by low impact Hammer/Breakar without damaging the structure & cleaning and disposal of malba out side the premises etc. complete as directed. Hard concrete should not be removed by force etc complete all as specified & directed

1)M&L for cleaning existing reinforcement with wire/ rotary wire brush to a shining bright finish, making the surfaces free from loose material, dirt etc complete and applying two coats of alkaline rust converting primer conforming to ASTM-B-117 of make. "Feovert" of "Krishna Conchem" OR "Roff Rust Cleaner' of 'Pidilite' OR 'Shali Rustoff' of 'STP Ltd', on rebars with time interval of 1 hr between the coats, complete all as specified and directed. (Note :- Mode of measurement: superficial area of concrete will be measured.) 2)M&L for Anticorrosive Treatment to Reinforcement using Corroseal - ZR of M/s Krishna Conchem or Epoxy Zinc Primer of M/s. Dr. Fixit by application on exposed reinforcement in two coats with time interval of minimum 4 hours between each coat. The application shall be done by brush after cleaning/wire brushing to the exposed steel surfaces, complete all as specified and directed.

M&L for Epoxy bond coat of Make Fosroc (NITOBOND-EP) OR EPOXY BONDING AGENT of Dr. Fixit OR equivalent of M/s. Krishna Conchem as approved by GE over exposed concrete surfaces prior to application of any type of mortar to ensure bond between old concrete & new concrete by brush application, complete all as specified and directed.

M&L for building up the profile of structural members by using polymer modified mortar from M/s. Krishna Conchem (Molith-PMM) OR Polymer mortar HB of Dr Fixit upto 40mm thickness including levelling, profiling etc in two layers, each layer not exceeding 20mm, etc complete all as specified & directed

M&L for PVC floor trap 75 mm dia of out let with grating including jointing to waste pipe with solvent cement fixed in cement concrete type B1 1:2:4 mixed with WPC including taking down the old one etc complete all as specified & directed

M&L 18 to 20mm thick Granite (of any type) tiles machine cut in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing, rounding of edges, cutting opening for sink and wash basins including 10 mm screed bed in CM 1:4 etc complete all as specified & directed

M&L Granite (of any type) slab 18 to 20mm thick machine cut, including fixing with 15 mm screed bed in CM 1:6 and including cutting polishing, rounding of sides etc complete all as specified & directed

M&L for 75mm thick cement concrete type C-2,1:3:6 (40mm graded stone aggregate) as in plinth protection ,finishing cement concrete surface even and smooth without using extra cement and spike rollong to surfaces or making impression of expanded metal,whilst the concrete is green etc complete all as specified & directed

M&L for preparation surfaces of old wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint etc complete all as specified & directed

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps,cills, sunshades, shelves, lintels, etc.;and making good,cutting exceeding 20cm girth etc complete all as specified & directed

M & L Reinforced cement concrete (nominal mix) 1:2:4 Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc complete all as specified & directed

M & L Reinforced cement concrete (nominal mix) 1:2:4 Beams, cantilevers, bressummers, lintels etc complete all as specified & directed

Formwork to soffits of suspended slabs including edges of slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) etc complete all as specified & directed

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers,lintels, cantilevers, shelves including sup- ports, overhangs,etc. also splays between floors and beams, etc complete all as specified & directed

M&L TMT steel bars 10mm dia & over, cut to length bent to shape required, including cranking, bending spirally for hoping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quali etc complete all as specified & directed

All as per Item No 93.00 above, but 5mm dia & over upto & including 10cm dia in stirrups, spacers & binders of TMT bars etc complete all as specified & directed

M&L for rendering 20mm thick in CM 1:4 as stone mansonry surfaces making surfaces fair & even without using extra cement etc complete all as specified & directed

M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete,using extra cement,including forms, moulds,mi-tred/stopped ends etc complete all as specified & directed

M&L for 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors etc complete all as specified & directed

M&L for broken stone of boulders loose filling with aggregates of gauge 60 to 12.50 mm as filter for weep holes etc complete all as specified & directed

Excavating over areas, n exc 1.5 m deep and getting out in any type of soil etc complete all as specified & directed

M&L for PCC 1:3:6 type C-2 75 mm thick (using 40mm graded aggregate) as in sub base etc complete all as specified & directed

M&L for PCC 1:2:4 type B-2 100 mm thick (using 40mm graded aggregate) as in sub base etc complete all as specified & directed

M&L for forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade 'A' etc complete all as specified & directed

M&L for forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ etc complete all as specified & directed

M&L for forming Construction joint 100mm deep x 10mm wide filled with sealing compound Grade ‘A’ etc complete all as specified & directed

M&L for sand filling under floors or in foundations including watering and consolidation etc complete all as specified & directed

M&L for Machine pressed precast concrete interlocking 80mm thick precast cement grade M-35 with grey cement and pigment having compresive strength 35 N/mm2 laid with over and including sand cushinig of average thickness 25mm after consolitation set and level the tiles on proper level with interlocking complete all as specified and directed.

M&L for Filleting exc 25 but n exc 50 Sqcm in any position and to any shape in Cement mortar 1:3 including all mitres, stops, etc complete all as specified & directed

S&F Framed work such as grills,grating etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk way; rallings ; frame work of watertanks and similar work etc complete all as specified & directed

Supply and lay GI tubing 25 mm dia medium grade (ISI marked) laid in trenches including all fittings such as bend, tee, union, elbow etc complete including testing complete all as specified and directed.

S&F gun metal globe / gate valve, globe conforming to IS 9338 with iron wheel heads, screwed both ends complete of size 25 mm, (2”) dia pipe.

M & L of PVC Service Water Tank of 500 Ltrs capacity including tank nipple, bends, sockets complete all fitting required at site all including taking down the existing tanks as specified and directed by Engineer-in-Charge.

S & F float ball valve assembly 25 mm bore , high pressure grade, with polythene float, fly nuts, screwed to GI pipe or brass ferrule, CI fittings viz. nipples, check nuts, reducers, elbow, sockets, etc. fixed complete all as specified and as directed.

Taking down copper/ aluminum point wiring (Light/Fan/Socket or power) complete including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces to walls floors etc complete all as specified & directed

Taking down complete main switches/DBs with enclosure and its components of any size and capacity, etc complete all as specified & directed

M & L for point wiring with FRLS PVC insulated unsheathed 1100 Volts grade single core multistranded copper conductor cable 1.5 Sqmm drawn in and including casing-caping and accessories, fixed on wall / ceiling etc with neccessary fixing accessories and earth continuity conductor cable of 1.5 Sqmm size connected to common earth and earth dolly including 1.6 mm thick pressed steel terminal boxes concealed in wall covered with laminated sheet top cover 3 mm thick for mounting switches / sockets / fan regulators fixed with Cadmium plated machine screws etc complete all as specified & directed :- for one light point controlled by one switch.

Supply & Fix switch piano single pole flush type 5A, 240 V one way etc complete all as specified & directed

Supply & Fix Ceiling rose surface bakelite three terminal, 240 V etc complete all as specified & directed

Supply and fixing LED lights fitting 1x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose etc complete all as specified & directed Make : PHILIPS / CROMPTON / BAJAJ / HAVELLS / SHAKTI

Supply & Fix MCB DB SPN 2 way 240 volts double door, including connecting up with existing cable with new lugs etc complete all as specified & directed

M & L for MCB SPN, 240 volt, 6 to 40 Amps, 10 KA, C Curve, etc complete all as specified & directed

S & F heavy duty, metallic body with metalic blades, exhaust fan, 380mm sweep, 230 volt with and including aluminium louvers, connecting up including provision of three core flexible copper wire of size 23/0076 from ceiling rose to fan complete in all respects etc complete all as specified & directed

M & L for Cutting holes into or through brick walls built in cement mortar for fixing the Exhaust fan and making good the distrubed surfaces in cement mortar 1:3 etc complete all as specified & directed

M&L for sub main wiring with two run single core 4.0 Sqmm PVC insulated FR multistranded flexible copper conductor cable 660/1100 volts grade down in through non metalic PVC casing caping with and including one run PVC insulated 4.0 Sqmm single core single strand copper conductor as continous earth wire in green colour connected to common earth dolly all as specified and as directed including taking down of old sub main wiring etc complete all as specified & directed Note 1 : Two Run of 4.0 Sqmm Wire, one run of earth wire PVC casing capping will be measured and paid one unit. Note 2 : A sum of Rs 22,702.00 towards sch of credit shall be deducted to arrive the contract sum.

H R ENGINEERS

Atharva Enterprises

M/s Hari Om Construction

A R ENGINEER

mp construction co

sahajanand const co.

Joy builders