REPAIR TO KOTA STONE, PCC FLOORING, PVC SHEET, PLUMBING FITTINGS, PLASTERING AND OTHER ALLIED WORKS IN MD AND OTM ACCN UNDER AGE B/R-I OF GE SUKNA

Amount

Taking down cement plaster on brick or concrete surfaces / ceiling, racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M & L for 15 mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces and finished the surface even and fair complete all as specified and directed.

M & L for 15 mm thick rendering in cement mortar 1:4 on other than fair faces of brick work or stone masonry or on one side of lathing surfaces and finished the surface even and smooth without using extra cement mixed with water proofing compound as per manufacture instruction etc up to 10 mtr high complete all as specified and directed. Note:- WPC shall be measured and paid separately.

M&L for rendering 10 mm thick on brick or concrete surfaces of ceiling / chajja / facia of chajja etc in cement mortar 1:3 and finished even and smooth without using extra cement up to 10 mtr height complete all as specified and directed.

M&L for rendering 10 mm thick on brick or concrete surfaces etc in cement mortar 1:4 and finished even and fair complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.

M&L Non Skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.18 sqm but n. exc. 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15 mm thick in CM 1:6 acomplete all as specified and directed.

M&L Non Skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.18 sqm but n. exc. 0.36 sqm, as in skirting/dado on vertical surfaces over etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including backing in 10 mm thick in CM 1:4 complete all as specified and directed.

M&L Non Skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.11 sqm but n. exc. 0.18 sqm, as in skirting/dado on vertical surfaces over etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 10 mm thick in CM 1:3 complete all as specified and directed.

M&L coloured glazed ceramic tiles 450 x 300 x 7 mm thick as in dado / skirting and vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick screed bed in CM 1:3 including roughening of surface complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc., laid, bedded and pointed in any mortar complete all as specified and directed.

M&L 18 mm thick granite (of any type) work (table rubbed and polished) as in counter basin, steps, jambs, pillars, window-cills, cooking platforms and like laid over and including screed bed 15 mm thick in CM 1:4 and pointing in white cement (1:2) using granite dust with admixture of pigment to match with shade of granite including grinding the edges half round and polishing complete all as specified and directed.

BLANK

S & F of mild steel framed work such as grills, gratings etc. with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar work conforming to Fe – 290 Gde E -- 165 complete all as specified and directed.

S&F Hard drawn steel wire fabric in available size weight not exc 4.00 kg / sqm fixed tank caging including welding, riverting, framing etc complete all as specified and as directed.

Dismantling wall and ceiling boards, partitions of any description or in any position (fibre, pulp, insulation etc.) any thickness, or insulation boards/ slabs/ blankets of any thickness including cover fillets complete all as specified and directed.

M&L for Non asbestos designer fibre cement building boards of size 595mm x 595mm x 4mm thick, used as a panel insert in a frame work made using GI T-section of size 25mm x 25mm in square pattern of grid size 600mm x 600mm the GI frame work is supported from the ceiling with the help of J hook and 4 mm GI wire of required size to maintain the proper levels etc the GI frame work is supported on side wall with the use of GI L section of size 25mm x 25mm angle complete all as specified and as directed.

M&L for Surface preparation surface to be free from frost, surface laitance and contamination free from loose aggregate or other sharp protrusions with fairly smooth finish for application of water proof coating prime the surface with water including removal of all existing treatment bituminious membrane tarfelt screed concrete etc from RCC slab complete all as specified and as directed.

M&L for Application of waterproofing coating providing and applying fostoc brushbond roof guard, a single component high build fibre reinforced acrylic waterproofing render for roofing system to be applied by brush at three coats at miniumum dry film thickness of 1mm, which should cure by reaction with atmospheric moisture to give tough elastomeric waterproof membrane, solid content - 70% tensile strength ASTM D 412-1.10 Mpa, elongation ASTM D12-100%, resistance to ageing due to - 1000hours, UV radiation ASTM D4587 E-No change, rapid chloride penetration ASTM C 1202-very low, pull off adhesion ASTM D541-0.92 Mpa, resistance to algae growth ASTM D 5589-97 - Passes, zero rating permeability (mm) (BSEN 12390 part 8)-n 5.0, water vapour transmission (ASTM E 96)-6.0g / m2h complete all as specified and as directed.

M&L for rendering 10 mm thick on brick or concrete surfaces etc in cement mortar 1:4 and finished even and fair complete all as specified and directed. (Note-WPC will be measured and paid separately)

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L providing PCC 1:2:4 type B1, (using 20 mm graded crushed stone aggregate) as in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, benching, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating and including necessary formwork complete all as specified and directed.

Taking down chowkats or frame n.exc 1.5 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed.

Taking down chowkats or frame but exc. 1.5 Sqm but not exc. 4.0 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed.

Taking down shutters of any description exc 1.0 Sqm but not exc 2.0 Sqm each complete all as specified and as directed.

S&F 1.25 mm thick of pressed steel frame of size 165 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc complete all as specified and directed.

S&F 1.25 mm thick of pressed steel frame of size 105 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc complete all as specified and directed.

M&L PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in copings, bed plates, bed block for holdfasts, similar bands, plinth coarses, string coarses, lacing coarces, parapets nad railings upto 60 cm in height, filling in pressed steel door frames, wall of drains, benching, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating and including necessary formwork complete all as specified and directed.

S&F 30 mm thick flush door shutters solid core construction, with block board core and plywood face fanels, commercial type on both side and covered on both side with decorative face veneer with liping / frame to match complete all as specified and directed.

S & F 30 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc. size of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) fitted to chowkhats complete all as specified and directed.

S & F factory made Solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain coloured PVC sheet reinforced with mild steel square tube as per specification and drawing given on MES schedule Part – II (2010) complete all as specified and directed.

S & F 30 mm thick (style thickness) factory made solid panel PVC shutter consisting of frame made out of mild steel tubes for top and bottom rails, mild steel frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheets beading and joined together with solvent cement as per specification and drawing given on MES schedule Part – II (2010) complete all as specified and directed.

S&F in repairs 18/19 mm thick block boards, grade 1 quality exterior grade, decorative type but with decorative face veneer on both faces, complete all as specified and as directed.

S&F in repairs 18/19mm thick pre laminated exterior grade, both sides laminated with decorative choice laminations fixed with screw to timber frame as in cupboard shutter, shelve kitchen cabinet etc complete all as specified and as directed.

S&F aluminium powder coated frame work (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates and including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading screws etc, complete all as specified and directed. Note :- (i) Weight of aluminium sections as per actual or as per IS or as per manufacture which over is less, shall only be considered for payment. (ii) Cost of all the items / accessories required for the entire completion of the work shall be deemed to be included in the quoted rate. however glass panes and wirecloth shall be measured and paid separately under respective items. (iii) The accessories (Aluminium mongries etc) required to be provided for window , vents and doors as per directions of Engineer - in- charges shall be provided but weight for the same shall not be considered and no extra cost will be paid.

S & F Steel windows with side hung shutters including box type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S & F Steel windows with side hung shutters including box type hinges with steel handle and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.

S & F Steel ventilator with top hung shutters including hinges, steel peg stay, and one steel tower bolt including dismantling of old steel window etc complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads area not exc 0.5 Sqm each complete all as specified and directed.

S & F Sheet glass 3.0 mm thick, ordinary quality and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane glazed with putty or fixed with beads complete all as specified and directed.

S&F 4 mm thick figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed.

S&F 4 mm thick plain sheet glass ordinary quality and glazing with oil putty or wooden beading to wooden frame or steel frame or in aluminium frame work exc 0.50 sqm in each pane complete all as specified and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned stacks, or stainless steel wire staples complete all as specified and directed.

S&F of 100 mm long Aluminium anodised barrel tower bolts, of extruded section complete all as specified and directed.

S&F of 150 mm long Aluminium anodised barrel tower bolts, of extruded section complete all as specified and directed.

S&F of 200 mm long Aluminium anodised barrel tower bolts, of extruded section complete all as specified and directed.

S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F 100 mm mild steel butt hinge, medium weight, and fixed etc complete all as specified and directed.

S & F Butt hinges, 75 mm extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type C-21 etc complete all as specified and directed.

S&F 150 mm Aluminium handles cast type, anodised and fixed complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and directed.

M&L brick work with fly ash brick, straight or curved on plan exc. 6 m mean radius built in CM 1:6 complete all as specified and as directed.

M&L brick work with fly ash bricks straight or curved on plan to any radius, built in CM 1:4 as in half brick thick walls complete all as specified and directed.

Taking down or up 15 mm bore steel tubing complete all as specified and directed.

All as per item no. 54 above but 20 mm dia bore pipe.

All as per item no. 54 above but 25 or 32 mm dia bore pipe.

S&F 15 mm bore galvanised steel water tubing medium grade and including necessary GI fitting (such as bends, elbows, tees etc.) and fixed to wall / ceiling or laid in / on floor complete all as specified and directed.

All as per item no. 57 above but 20 mm dia bore pipe.

All as per item no. 57 above but 25 mm dia bore pipe.

Supply and laying of CPVC pipes 20 mm outer dia SDR-11 & plain CPVC SDR 11 fittings on wall / ceiling or laying in floor complete all as specified and directed.

Supply and laying of CPVC pipes 25 mm outer dia SDR-11 & plain CPVC SDR 11 fittings on wall / ceiling or laying in floor complete all as specified and directed.

S&F in repairs rotational moulded polyethylene water storage tanks of 500 Litres capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position and including 20 mm dia nipple suitable for HDPE water tank (minimum weight 45 gm), 20 mm bore ball valves (minimum weight 210 gm) high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed to 20 mm bore pipe & locking with GI wire (to prevent monkey menace) to tank including dismantling of old tank complete all as specified and directed.

S&F in repairs Ball valves 20 mm dia high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 15mm-142gms / 20mm - 210gms / 25mm - 455gms / 40mm - 690gms) etc complete all as specified and directed.

S&F in repairs 20 mm bore gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed class-1 complete all as specified and directed.

S&F in repairs 25 mm bore gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed class-1 complete all as specified and directed.

S&F in repairs sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915 x 460mm bowl size 405 x 355 x 178 mm and including 32 mm waste pipe & coupling complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (Padestal Pattern), including connection to flush pipe, 'P' or 'S' trap, with fixing bolts PVC seat cover with chromium plated mild steel hinges device (excluding flushing cistern and flush pipe), and making good to dismantled / damaged tiling floor complete all as specified and directed.

S&F in repairs vitreous china squatting pan, "Orissa pattern" white, size 580 x 440 mm with integral foot rest, 'P' or 'S' trap and including connection to trap and to flushing pipe, CI anti - syphonage pipe complete all as specified and directed.

S&F in repairs vitreous china wash hand basin white flat back of size not less than 550 x 400 mm with and including PVC waste pipe 32 mm bore, CP waste fitting and cutting for and pinning in ends of brackets etc, complete all as specified and directed.

S&F in repair PVC low level flushing cistern of 10 litres capacity, valve less, syphonic action type, white body, with inlet ball valve, float and handle including brackets complete all as specified and directed.

S&F PVC connections 15 mm size with PTMT nuts, of length 450 mm & suitable for hot water supply complete all as specified and directed.

Taking down PVC rain water pipes (any size or pattern) including all fittings head shoes etc complete all as specified and directed.

S&F of 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F of 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed.

S & F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed.

S&F PVC (SWR) 75 mm bore bend, of any radius complete all as specified and directed.

S&F PVC (SWR) 110 mm bore bend, of any radius complete all as specified and directed.

S&F in repairs 75 mm bore PVC (SWR) floor trap, plain with stainless steel grating and including jointing with solvent cement fixed in cement concrete type B-1 1:2:4 (using 12.50 mm graded granite stone aggregate) complete all as specified and directed.

S&F in repairs 25 mm dia harrison rail, mild steel, chromium plated with & includig suitable fixing CP brackets, stops, rollers etc. complete all as specified and directed.

S&F of 50 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed.

S & F in repairs 15 mm bore fancy type chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule including CP nipple with socket complete all as specified and directed.

S & F in repairs Fancy type chromium plated with long shank and cup (Concealed type) 15 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S & F in repair 15mm bore stop valve / angle valve fancy type, chromium plated, cast copper alloy, concealed type, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions including CP nipple and socket complete all as specified and directed.

S&F in repairs pillar tap 15 mm bore,fancy type, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without lettered “hot" or “cold” with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S&F in repair wall mixture with provision for overhead shower with 115 mm long bend pipe on upper side connecting legs and wall flange of 15 mm bore etc complete all as specified and directed.

S&F in repairs centre whole basin mixture without popup waste system with 450 mm long bradied hoses of 15 mm bore etc complete all as specified and directed.

S&F in repair hand shower Health faucet ABS body with 8 mm dia, 1.20 mtr long flexible tube & wall hook etc complete all as specified and directed.

S&F in repair Stainless Steel Soap dish holder etc complete all as specified and directed.

S&F in repair toilet paper holder with flat recessed type stainless steel / chromium plated complete all as specified and directed.

S&F in repair tubular towel rail 20 mm dia type brass chromium plated 600mm long between flanges complete all as specified and directed.

S&F in repair swivel shower rose size 125 mm of brass chromium plated any colour (minimum weight 40 gms) for fixing with 15mm dia steel pipe complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

M&L for brushing neat cement slurry with 3.00kg of cement per sqm over roof surfaces and sunken floor etc, providing 20 mm thick plastering in cement mortar 1:4 mixed with liquid water proofing compound finished even and smooth complete all as specified and as directed. Note :- Supply only water proofing compound shall be measured and paid seperately.

M&L for Plain Cement Concrete Type E2 1:5:10 (using 20 mm graded stone aggregate) as in sunken portion of WC etc complete all as specified and directed.

M&L for applying and evently bituminous tack coat @ 1.20 kg/sqm of industerial bitumen blinded with 0.006 cum of course sand per sqm on the surfaces of suken including polythene film, 50 micron thick, laid on a coat of bitumen primer, @0.30 to 0.50kg per sqm floor complete all as specified and as directed.

M&L 75 mm thick, PCC 1:3:6, type C-1 (using 20 mm graded crushed stone aggregate) as in paths, plinth protection, hardstanding etc. finished even and smooth without using extra cement complete all as specified and directed.

M&L preparation of new wooden surfaces of any description, not otherwise described over 10 cm width or girth and including applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L preparation of new steel surfaces of any description, not otherwise described over 10 cm width or girth and including applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint) complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coats of synthetic enamel paint complete all as specified and directed.

M&L for preparing newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparing new plastered surface of walls with a thin layer of Birla / Asian wall care putty and applying two coat of oil bound distemper white or any tint over a coat of primer etc complete all as specified and directed.

M&L for applying one coat of white washing (Lime wash white) on ceiling surfaces including preparation of old decorated plastered / unplastered surface of ceiling complete all as specified and directed.

M&L complete removal of old plastered surface of walls with a thin layer of Birla / Asian wall care putty and applying two coat of oil bound distemper white or any tint over a coat of primer etc complete all as specified and directed.

M&L for applying one coat of oil emulsion distemper (oil bound distemper) of any tint including preparation of surfaces of walls on old decorated plastered / unplastered surfaces by washing / rubbing down and scrapping old loose material, smoke, soot, moulds, moss and efflorence etc including filling and stopping the rough surface / nail holes with white cement /POP/ wall putty complete all as specified and directed.

M&L for applying two coat of oil emulsion distemper (oil bound distemper) of any tint including preparation of surfaces of walls on old decorated plastered / unplastered surfaces by washing / rubbing down and scrapping old loose material, smoke, soot, moulds, moss and efflorence etc including filling and stopping the rough surface / nail holes with white cement /POP/ wall putty complete all as specified and directed.

M & L for preparing newly plastered walls surfaces and applying two coats of cement base paint complete all as specified and directed.

M&L complete removal of exiting treatment of old decorated wall surfaces by washing with jet washer machine, removal of nails etc & filling cracks / hole with putty applying one coat of primer using auto roller and applying 1 to 2 mm thick wall care putty and sanding the same by vaccum based sanding machine till obtaining even and smooth finish and applying two coats of exterior weather coat paint using auto roller complete all as specified and directed as per manufactures instructions. Note :- (i) Multipurpose mixer shall be used for unifrom and proper mixing of putty. (ii) Work shall be performed by authorised application of paint company as approved by GE.

M&L complete removal of exiting treatment of preparing old plastered surface of wall and applying one coat of cement base paint by brooming down, scraping, cleaning and removing smoke soot, moulds, moss and efflorescence complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness including nainital or similar pattern in roof and wall covering complete all as specified and directed.

S&F Fibre glass reinforced translucent corregatted sheeting with two corrugations side lap fixed with screw and washer, L-type or J-type cranked hooks in roof an wall etc complete all as specified and directed.

M&L machine cut Kota stone slab 20-25mm thick in riser of steps, skirting dado and pillar over and including 20 mm thick screed bed / bedding layer of 1:6 cement mortor laid as floor and jointed with grey cement slutty mixed with pigment to match the shade of the slab including rubbing and polishing complete including necessary dismantling of floor tiles complete all as specified and directed.

Dismantling Unframed timber scantlings 40 Sqcm and over in section and in any position in framed work complete all as specified and directed.

M&L 75 mm thick, PCC 1:3:6, type C-2 (using 40 mm graded crushed stone aggregate) as in sub base, floors etc complete all as specified and directed.

M&L 100 mm thick, PCC 1:2:4, type B-2 (using 40 mm graded crushed stone aggregate) as in paving and finished even smooth without using extra cement complete all as specified and directed.

M&L cement concrete chequered tiles 300 x 300 x 25 mm thick as in floors, set and jointed over and including 20 mm thick screed bed in CM 1:6 and pointed in grey cement and pigments to match the colour of tile complete all as specified and directed.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc of 500 ltr to 1000 ltr capacity PVC water storage tank without dismantling the tank incl writting the item "Tank Cleaning on ____" indication the date, month & year of cleaning on external wall of tanks walls with synthetic enamel paint all as specified and directed by Engr -in-charge.

S&F in repair PVC kit for PVC valveless action type flushing cistern low level of 10 ltr capacity suitable for both indian type water closet & europeon type water closet i etc complete all as specified and as directed.

S & F in repairs stainless steel Grating doom 100 mm dia square / round with waste hole of PTMT (Minimum weight 25gms) complete all as specified and directed.

M&L in repair to rolling shutter / gate including necessary gressing, welding, locking arrangement, spring complete as to bring in service condition ( without taking off shutter) complete all as specified and directed.

S&F in repairs mortise locks suitable for aluminium door of 65 mm size 4 lever brass body vertical type as per existing or sample complete all as specified and directed.

M/s B. K. Ghosh and Co.

SHRI ARUN BHATTACHERJEE

R K UDYOG

ASHISH ROY

M/S GLORIOUS CONSTRUCTION

R N SAH N CO

S D CONSTRUCTION CO

GEETA CONSTRUCTION