Transportation, Installation, necessary fabrication, Commissioning, Trail Run including Extension of 80LTandem Belt Conveyor (8D to 19D) in RVIIA seam of 3n4 Incline under Jhanjra Area.

Amount

ENM PART

Transportation of the 1000mm width, 1x90kW, 550V Drive Head complete including gear box, motor(90KW/550V), base frame, couplings, bearing blocks, fencing etc from surface and installation at 80L/9D (R-VIIA) with necessary fabrication job.

Transportation of Discharge Unit complete with girders, strike plate, chute plates, scrappers etc from surface and installation at 80L/8D (R-VIIA) with necessary fabrication job.

Transportation of Loop Take Up Unit complete with motorized winch from surface and installation at 80L/(9D-10D) (R-VIIA) with necessary fabrication job.

Transportation of Tail End Unit complete with fencing from surface and installation at 80L/11D (R-VIIA) with necessary fabrication job.

Transportation of 103.5mtr. 1000mm belt conveyor structure complete with stringer, foot stool, top bracket, top & bottom roller etc. from surface to 80L.

Loading, transportation and unloading of one breaker(550V/200A), starter(550V/90kW), LS unit from surface to 80L/9D (R-VIIA) with help of haulages & 60 mtr manually. (Distance- approx. 3400mtr.)

Transportation of 150mtr 3.3kV grade 70 sq.mm. PVCDWA cable from surface to 79L/5D(R-VIIA) with help of haulages. (Distance- approx. 3400mtr.)

Laying-hanging of 150mtr 3.3kV grade 70 sq.mm. PVCDWA cable from 79L/5D(R-VIIA) to 80L/8D(R-VIIA) manually.

Making of drive head base frame at site with ISMB-250.

Making of tail end frame at site with ISMB-200.

Transportation of 230mtr. 1000mm width PVC belting from surface to 80L tandem belt installation site with help of haulages & 60mtr manually. (Distance- approx. 3400mtr.)

Laying, lapping, jointing & tensioning of this 230mtr. 1000mm width PVC belting in proposed 80L tandem belt.

Transportation of 800mtr belt sequence cable from surafce to 80L/-11D(R-VIIA); (Distance- approx. 2600mtr.)

Laying-placing-binding of 800mtr belt sequence cable from 80L/-11D starter to 80L/9D starter along 80L belt conveyor structure in R-VIIA seam.

Transportation of pull cords with its cable, communication devices with its cable, signalling system (8-SWG GI wire, bobbin insulators & 3/8" X 3" MS Bolt-nut) from suarfce to 80L tandem belt installation site with help of haulages for 103.5mtr. belt and laying-placing them from 80L/8D to 80L/11D in R-VIIA seam.

Testing, trial run, alignment & commissioning of this belt conveyor from 80L/8D to 80L/11D in R-VIIA seam.

Eight times dismantaling of Tail End unit for eight times belt extension of proposed 80Ltandem belt.

Eight times transportation and installaion of tail end unit complete for eight times belt extension.

Transportation of belt structure of 1000mm width Belt for a length of 276 Mtr. By haulage and installation.

Transportation of 552mtr. 1000mm PVC belting from surface through haulages & 60mtr. manually to 80L(R-VIIA) tandem belt extension site.

Laying, Lapping, Jointing & Tensioning of this 552mtr. 1000mm belting from 80L/11D to 80L/19D in R-VIIA seam during eight times belt extension and trial run.

Transportation of pull cords with its cable, communication devices with its cable, signalling system (8-SWG GI wire, bobbin insulators & 3/8" X 3" MS Bolt-nut) for 276 mtr. belt from surface to 80L tandem belt extension site and laying & fitting them during eight times belt extension.

Supply of DA cylinder

Supply of Oxygen cylinder

Supply of MS Nut+ Bolt of 5/8" X 2"

Supply of HT Nut+ Bolt of M20 X 75mm, 10.5Grade

Supply of HT Nut+ Bolt of M20 X 65mm, 10.5Grade

Supply of HT Nut+ Bolt of M30 X 140mm, 10.5Grade

Supply of HT Nut+ Bolt of M30 X 140mm, 10.5Grade

Supply of HT Nut+ Bolt of M24 X 120mm, 10.5Grade

Supply of Five Ton Capacity Turn Buckle

CIVIL PART

Recess cutting in stone

Muck n Debris cleaning and disposal upto 15 Mtr.

Supplying and Filling in plinth with sand under floors including watering, Ramming, consolidating and dressing complete

Brick Work with Flyash Brick of class design 75 in foundation and plinth in CM: 1:4 (1Cement: 4 Coarse sand)

Providing and Laying in position cement concrete of specified grade excluding the cost of centreing and shuttering - all works upto plingth Level: 1Cement: 2 Coarse sand (Zone -III): Stone Aggregate 20MM nominal Size

12 mm Cement Plastering of mix -1Cement: 6 Fine sand

Loading of materials into Tub, Lowering and Unloading

Mining Part

Roof Heightning by drilling, Blasting in stone including dressing, cleaning with cost of drill rod and drill Bit(Excluding cost of explosive and detonator)

Roof Bolting including Carrying of materials from surface to underground site, drilling, Grouting, and cost of drill Rod and Drill Bit

Total impact of GST for the purpose of CTC

BABLU SINHA

RINA ENTERPRISE