RESURFACING (BLACK TOPPING) OF NEPAL BUND ROAD BETWEEN KM. 0.000 TO KM. 12.050 AND LINK BUND ROAD FROM KM. 0.000 TO KM. 2.520 IN DISTRICT, NAVAL PARASI OF NEPAL . LOT 28

Amount

Providing, laying, spreading and compacting stone aggregates of praper sizes and specified quarry to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeled 80-100 kn in stages to proper grade and camber, applying and brooming crushable screening to fill up the interstices of coarse aggregate, watering and compecting to the required density grading-3 as per direction of engineer In Charge including cost of all lead, lift, material, labour, T&P etc. required for proper completion of work on as per direction of engineer incharge.

Providing and applying primer coat with Emulsion (SS-1) on prepared surface of granular Base including cleaning of road surface and spraying primer at the rate of 0.75 kg/sqm using mechanical means including cost of all lead, lift, material, labour, T&P etc. required for proper completion of work on as per direction of engineer incharge.

Providing and applying tack coat with bitumen VG-10 grade using pressure distributor at the rate of 0.30 kg per sqm on the prepared bituminous/ granular surface cleaned with mechanical broom including cost of all lead, lift, material, labour, T&P etc. required for proper completion of work on as per direction of engineer incharge.

Providing, laying and rolling of required open-graded premix surfacing of 20 mm thickness composed of 13.2 mm and 11.2 mm aggregates of specific quarry, using VG-10 grade bitumen to required line grade and level to serve as wearing coat on a previously prepared base by manual means including mixing in a sutaibule Mixall (6/10 T capacity Bitumen boiler oil fired 1000 liter capacity fitted with spray set) or Moveable Mini hot mix plant laying and rolling with a smooth wheeled roller 8-10 ton capacity, finished to required level and grades including cost of all materials, labour, lead, lift, T&P etc. required for proper completion of work as per direction of engineer incharge.

Providing and laying seal coat by manual means with VG-10 grade Bitumen sealing to fill the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per TSC 510, including cost of all materials, labour, lead, lift, T&P etc. required for proper completion of work as per direction of engineer incharge.

Laying of R.B.M. on road shoulder including cost of all materials, labour, lead, lift, T&P etc. required for proper completion of work as per direction of engineer incharge.

M/S V.P.S. ENTERPRISES

M/s Ayodhya Mishra