CONSTRUCTION OF DOUBLE STOREY BUILDING (ART CRAFT, SCIENCE LAB, LIBRARY AND 4 ACRS) AT HSS PARGWAL ZONE JOURIAN DISTT JAMMU

Amount

Earthwork in excavation by manual means in trenches for foundation,drains, pipes,cables etc(not exceeding 1.5 mt in width)and for shafts,wells cesspits and the like not exceeding 10sqm on plan depth up to 1.5mt including disposal of excavated earth up to 1 mt from cutting edge disposed earth to be levelled and neatly dressed. All kinds of soils .

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All works up to plinth level in 1:5:10 grade, with 40mm nominal size of aggregates. Crushed including all lead, lift and carriages.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- all works upto plinth level 1:3:6(1 cement 3 coarse sand 6 graded stone agg. 20 mm nominal size) crushed including all lead, lift and carriages.

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering. shuttering, finishing and reinforcement-All work upto plinth level 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20mm nominal size) including all lead, lift and carriages.

Providing and laying in position cement concrete of specified grade of reinforced cement concrete, excluding the cost of centering and shuttering. in 1:1.5:3 (1 cement:1.5 coarse sand: 3 graded stone aggreate 20mm nominal size in suspended floors, balconies,landings and staircase having upto 15 degree slope excluding cost of centering and shuttering.All work upto floor V level.including all lead, lift and carriages.

"Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutmen""ts, posts ans sturts, etc. upto floor five level excluding cost of centring, shuttering, fmishing and reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded crushed stone aggregate 20mm nominal size)"including all lead, lift and carriages.

Reinforcement for RCC work including straightening cutting,bending,placing in position & binding all complete with TMT bars.

Brick work with common burnt clay F.P.S (non modular) bricks of class designation 75 in foundation and plinth cement mortor 1:6 (1 cement 6 coarse sand and extra for brick work in super structure above plinth level up floor 5 level (by manual means) including all lead, lift and carriages.

Half brick masonry with bricks of class designation 75 in foundations and plinth in Cement mortar 1 :4 ( 1 cement : 4 coarse sand) & Extra for half Brick masonry in superstructure above plinth level upto floor V level.including all lead, lift and carriages.

Providing and laying in position DPC 50mm thick withc.concrete 1:2:4 mix (1 cement 2 coarse sand 4 graded stone agg. 20 mm nominal size) crushed

Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Angle 40x40x6mm

Centring and Shuttering including strutting, propping etc and removal of form work for foundation , footings , basis of columns etc. for mass concrete.

Centring and Shuttering including strutting, propping etc and removal of form work for Lintels, beams ,plinth beams ,girders,bressumers and centilevers.

Centring and Shuttering including strutting, propping etc and removal of form work for Suspended floors, roofs, landings, balconies and access platform

Centring and Shuttering including strutting, propping etc and removal of form work for Columns, Pillars, Piers, Abutments, Posts and Struts.

Centring and Shuttering including strutting, propping etc and removal of form work for Edges of Slabs and Break in floors and walls under 20 cm wide

12mm Cement plaster of mix 1 : 4 ( 1 cement : 4 fine sand) including all lead, lift and carriages.

15mm Cement plaster on the rough side of single or half brick wall of mix:1 : 6 ( 1 cement : 6 fine sand) including all lead, lift and carriages.

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. Fixed to steel windows by welding 10 mm square bar 4" c/c

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. Layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m.

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,all complete as per direction of engineer- in charge.35mm thick 2nd class kail wood

Providing and fixing glazed shutters for doors, windows and clerestory windows using 10kg/sqm (4mm thick) float glass panes including lSI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 30mm thick Second class kail wood

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.Decorative ply wood both side decorative veneer (type 1) conforming to IS 1328 BWR type

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete:Kiln seasoned & chemically treated hallock wood 50x12mm

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge :Second class Kail wood.

Providing fixing and incorporating glass strips in joint of terrazo/cement concrete floor 40mm wide and 4mm thick.

Cement concrete Flooring in 1:2:4 (1 cement : 2 coarse sand: 4 Graded Stone aggregate) finishing with floating coat of neat cement including cement slurry but excluding the cost of nosing of steps etc. compete. 50 mm thick 20 mm nominal size stone aggregate Crushed.

6mm ceemnt plaster to ceiling pf mix 1:3(1 cement 3 fine sand) including all lead, lift and carriages.

Making plinth protection 50 mm thick of cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggreagate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. Crushed including all lead, lift and carriages.

Forming grooves of uniform size in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the grooves complete as per specificatiOns and direcUon of the Engineer-in-charge 13.83.1 15mm wide and 15mm deep groove metre.

Making Blackboard (1no.)one in each class room in cm (1:4) complete in all respect as per drawing

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including priming coat with cement primer

Finishing walls with water proofing cement paint of required shade New work (two or more coats) applied @3.84 kg/10sqm

Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shades to give an even shade New wood work (two or more coats)

Providing and fixing electic point complete in all respects as per directions of Engineer incharge

Engagement of painter for writing name of school, logo, chart etc complete job.

Providing and laying 75MM thick bed of dry brick aggregate 40 mm thick nominal size including spreading, well rammed, consolidated and grouted with fine sand including finishing smooth etc. complete as per direction of engineer incharge.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to lS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete ( Size of tile 60x60cm ) double Charged

Providing and fixing white vitreous china laboratory sink with C. I. brackets, C.P. brass chain with rubber plug 40mm C.P. brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete including painting of fittings and brackets, cutting and making good the walls wherever required Size 600x450x200 mm

Providing and fixing C.P. brass chain and rubber plug complete for sink or wash basin :40 mm dia.

Providing and fixing C.P. brass close hole basin mixer piller tap of approved quality and make, weighing not less than 1.970 kg.

Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, anity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade (Area of slab upto 0.5 sqm)

Providing and fixing G.l. pipes complete with G.l. fittings and clamps, including cutting and making good the walls etc.Concealed pipe including painting with anti-corrosive bitumastic paint, cutting chases and making good the wall 15 mm dia. nominal bore

Providing and fixing G.l. pipes complete with G.l. fittings and clamps, including cutting and making good the walls etc.Concealed pipe including painting with anti-corrosive bitumastic paint, cutting chases and making good the wall 20 mm dia. nominal bore

Providing and fixing G.l. pipes complete with G.l. fittings and clamps, including cutting and making good the walls etc. INTERNAL WORK-Exposed on wall 15 mm dia. nominal bore Medium

Providing and fixing G.l. pipes complete with G.l. fittings and clamps, including cutting and making good the walls etc. INTERNAL WORK-Exposed on wall 20 mm dia. nominal bore Medium

Providing and fixing G.l. pipes complete with G.l. fittings including trenching and refilling etc. (external work) 15 mm dia. nominal bore

Providing and fixing G.l. pipes complete with G.l. fittings including trenching and refilling etc. (external work) 20 mm dia. nominal bore

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms

Providing and fixing PTMT grating of approved quality and colour Circular type 125 mm nominal dia with 25mm waste hole.

Providing and fixing uplasticised PVC connection pipe with brass unions 30 cm length 15mm nominal bore

Providing and fixing uplasticised PVC connection pipe with brass unions 30 cm length 20mm nominal bore

Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. LMR

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 15mm dia

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 20mm dia

Providing and fixing on wall face unplasticised - Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.110 mm diameter

Providing and fixing on wall face unplasticised - Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.110 mm Bend

Constructing soak pit 1.20x1.20x1.20m filled with birckbats including S.W. drain pipe 100 mm diameter and 1.20m long complete as per standard design

Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid lSI license].

Providing and fixing hardware fixtures (Aluminium) ISI marked anodised (Anodic coating) not less than grade AC 10 as per IS-1868 Sliding door bolts (300 x 16mm)

Providing and fixing hardware fixtures (Aluminium) ISI marked anodised (Anodic coating) not less than grade AC 10 as per IS-1868 tower bolt200x10mm

Providing and fixing hardware fixtures (Aluminium) ISI marked anodised (Anodic coating) not less than grade AC 10 as per IS-1868 tower bolt150x10mm

Providing and fixing hardware fixtures (Aluminium) ISI marked anodised (Anodic coating) not less than grade AC 10 as per IS-1868 handle 125mm

Providing and fixing hardware fixtures (Aluminium) ISI marked anodised (Anodic coating) not less than grade AC 10 as per IS-1868 handle100mm

Providing and fixing hardware fixtures (Aluminium) ISI marked anodised (Anodic coating) not less than grade AC 10 as per IS-1868 twin rubber stopper

Painting top of roof with bitumen of app. Quantity of 17kg/sqm in pragnated with a coat of coarse sand at 16 Cum/10sqm including cleaning the slab surface with brushes and finally with a piece of cloth tightly soaked in kerosine oil complte with a reausidual type of petroleum bit. of penetration 80/100

Providing & laying Tar sheet roof complete job as per direction of engineer incharge at site.

10cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25mm thick mud mortar mixed with bhura at 35 kg per Cum of earth and gobri leaping with mixed 1:1 (1 clay: 1 cowdung ) and covered with flat tile bricks of class designation 100 grouted with cement mortar 1:3 (1 cement: 3 fine sand ) mixed with 2% of integral water proofing compound by wt of cement and finishing neat with F.P.S Brick Tiles including all lead, lift and carriages.

Providing gola 75*75mm in cement concrete 1:2:4(1 cement 2 coarse sand 4 stone agg. 10mm and down gauge including finishing with cement mortor 1:3(1 cement3 fine sand) as per standard design in 75*75 mm deep chase

Making khurras 45*45cm with average minimum thickness of 5 cm cemnt concrete 1:2:4(1 cement 2 coarse sand 4 graded stone agg. Of 20mm nominal size) over pvc sheet 1m*1m*400 micron finished with 12mm cement plaster 1:3 (1 cement 3 coarse sand) and a coat of neat cement rounded the edges and making and finishing the outlet complete

Karan Singh

KIRPAL SINGH

ROMESH CHANDER

Madan Lal

Asif ahmed

Rakesh Kumar

ANKIT GUPTA CONTRACTOR

Kewal Khajuria

Sudesh Kumar

Dev Raj Bhagat

Harsh Vardhan Sons

Jai Singh Manhas

Parshotam Singh

NIRMAL SINGH

Bilal Ahmed Wani

M/s shafiq constt