Special Repair for various work in Jawahar Navodaya Vidyalaya, Niwarsi in District Kurukshetra.

Amount

Dismantling cement conglemerate / terrazzo floors 25 mm to 50 mm thick including concrete base (HSR 8.25)

Cement concrete 1:8:16 with brick ballaast 40mm nominal size in first storey upto 4 meters above plinth level (HSR 10.44)

Conglomerate floor 40 mm thick cement concrete topping 1:2:4 (HSR 14.9)

Providing & Fixing Vitrified Tiles 600 x 600 mm of approved make in flooring laid in any pattern as specified over base of 20 mm thick cement coarse sand mortar 1.3 and jointed with white cement slurry mixed with pigment to match the shade to tiles. (HSR 14.89) Note: Tile shall be of premium quality (first quality) of reputed manufacturer like: NITCO, KAJARIA, SOMANI, ORIENT, JOHNSON & RAK.

Scraping Cement Plaster (HSR 8.32) ( c )

Laying and fixing virtified/ceramic anti skid tiles of any size of approved make in floors laid in any pattern as specified over base of 20mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of tiles. (Tiles shall be supplied by the department) (HSR 14.93)

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE (to the approval of the Engineer-in-charge) EUROPEAN TYPE WATER CLOSET SUIT WITH NON- CONCEALED ‘P’ OR ‘S’ TRAP with or without vent and all other necessary fittings as fully described in item no.30.3 above. (HSR 30.4) (i)

EXTRA OVER Item nos. 30.1 to 30.4 and 30.6 FOR PROVIDING AND FIXING 15 LITRES CAPACITY LOW LEVEL VITREOUS CHINA WARECISTERN complete with flush bend all other necessary fittings instead of C.I. high level cistern complete with fittings.(HSR 30.12)(i)

EXTRA OVER item nos.30.3 to 30.6 FOR PROVIDING AND FIXING BEST INDIAN MAKE PLASTIC HYGENIC SEAT with lid complete instead of hollow black or white plastic seat and lid.(HSR 30.13)(i)

Providing and fixing in position 15mm i/d C.P. brass bib cocks of best quality (as required by the engineer-in-charge).Bib cock.(HSR 30.75) (c)

PROVIDING AND FIXING POSITION BEST INDIAN MAKE FLAT BACK OR ANGULAR LIPPED FRONT URINAL 465 MM HIGH CONSISTING OF : -(HSR 30.19) (i)

Providing and fixing in position best Indian make (Ordinary) lavatory suites consisting of Lavatory in vitreous chinaware size as given below ( to the approval of the Engineer-in-Charge) including China plug for tap hole where necessary R.S. or C.I. brackets for building into wall including painting; 32mm C.P. Brass waste with C.P. brass chain and rubber plug. 15mm C.P. Brass screw down pillar tap with jamnuts or couplings best design(as approved by Engineer-In-Charge) All fittings best Indian make and to the approval of the Engineer-in-Charge. All fittings best Indian make and to the approval of the Engineer-in-Charge.All brass work chromium plated and complete in all respects including cutting and making good the walls floors and painting of fitting etc. (HSR 30.41) (a)

Note: In case of any difference in the unit & nomenclature of any of the HSR items depicted in this DNIT and that given in HSR, the unit and nomenclature given in HSR shall be applicable.

Aggarsain Coop L C Society