Loading…
Loading…
| # | Company | Amount |
|---|---|---|
| 1 | ₹11.2 L |
Tender Value
₹16.1 L
EMD Value
₹32,300
Closing Date
11 Aug 2026, 3:00 pmClosed
Executive Engineer, BUILDING DIVISION Ara
EE
EE, Ara Division , BUILDING CONSTRUCTION DEPARTMENT, Ara, Bihar
Superintending Engineer, Ara Circle
SE
Construction of Watch Towers at Mandal Kara at Ara (North Side) for the year 2026-27
136590
NIT 6/BCD/ARA/2026-27
Open Tender
CIVIL
Aurangabad
• as per nit
CIVIL
PERCENTAGE
L1
1
6 documents required · 6 mandatory
₹5,000
Processing Fee: 1180
₹32,300
21 Sept 2026
20 Jul 2026
12 Aug 2026
20 Jul 2026
11 Aug 2026
20 Jul 2026
BOQ for Construction of Watch Towers at Mandal Kara at Ara (North Side) for the year 2026-27
Sl No SOR Items Qty. Unit Rate Amount
1 2.8.1 Earth work in excavation in foundation trenches or drains(not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m . including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All Kinds of soil 29.87 M3 360.70 ₹ 10,774.00
2 2.26 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth: consolidating each deposited layer by ramming and watering lead 19.42 M3 123.90 ₹ 2,406.00
3 2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. 3.49 M3 287.30 ₹ 1,003.00
4 11.72 Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l, 17.98 M2 283.30 ₹ 5,094.00
5 4.1. Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level.
4.1.3 1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) 2.67 M3 3998.10 ₹ 10,675.00
6 5.1.2 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring,shuttering,finishing and reinforcement-All work puto plinth level 9.16 M3 4688.30 ₹ 42,945.00
7 5.2.2 Reinforced cement concrete work in wall (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts, etc. upt floor five level excluding cost of centring, shuttering, finishin and reinforcement. 1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate 20mm nominal size) 3.39 M3 5670.00 ₹ 19,221.00
8 5.3 + 5.33B.4 Reinforced cement conrete work in beams,suspended floors, roofs having slope upto 15, landings,balconiec, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excludingthe cost of centring, shuttering, finishing and reinforement with 1:2:4(1 cement:2 coarse sand:4 graded stone aggregate 20 mm nominal size). Add or deduct for providing richer or leaner mixes respectively at all floor levels. Providing M-15grade R.C.C instead of M-20 grade R.C.C. 6.95 M3 5719.70 ₹ 39,752.00
9 6.1.14A Brick work with bricks of class designation 100A in foundations and plinth in : Cement mortar 1:6 (1 cement: 6 coarse sand ) 4.33 M3 4923.00 ₹ 21,317.00
10 6.1.14A +6.3A Brick work with bricks of class designation 100A in foundations and plinth in : Cement mortar 1:6 (1 cement: 6 coarse sand ) Extra for Brick work in superstructure above plinth level upto floor V cum 14.15 M3 5765.00 ₹ 81,575.00
11 9.48.1 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding 122.50 KG 114.60 ₹ 14,039.00
12 10.14.1 Providing and fixing T-iron frames for doors. windows and ventilators of mils steel Tee-sections, joints miltred and welded with 15x3 mm lugs 10 cm long embedded in cement concerete blocks 15x10x10 cm of 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required including 30.20 KG 110.40 ₹ 3,334.00
13 10.7. Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3mm MS gusset plates at the junction and corners.all necessary fittings completejncluding applying a priming coat of approved steel primer. 2.277 M2 3653.00 ₹ 8,318.00
14 5.9. Centring and shuttering including strutting,propping etc. and removal of form for.
5.9.1 Foundations, footings, bases of columns etc. for mass concrete. 15.04 M2 211.60 ₹ 3,182.00
5.9.5 Lintels, beams, plinth bams, griders, bressumers and contilevers. 15.44 M2 404.70 ₹ 6,249.00
5.9.6 Columns,Pillars, Piers, Abutments, Posts and Struts 36.41 M2 494.40 ₹ 18,001.00
5.9.3 Suspended floors, roots, landings, balcnies and access platform. 16.16 M2 437.50 ₹ 7,070.00
5.9.7 Stairs,(excluding landings) except spiral-staircaces. 10.91 M2 439.90 ₹ 4,799.00
15 13.17.1 12 mm cement plaster 1:3( 1 cement: 3 coarse sand) finished with a floating coat of near cement 65.37 M2 203.60 ₹ 13,309.00
16 13.24.1 6 mm cement plaster to ceiling of mix :1:3(1 cement: 3 coarse sand) 62.90 M2 131.30 ₹ 8,259.00
17 13.12. 15 mm cement plaster on rough side of single or half brick wall of mix.
18 13.79.1 +13.78.1 New work (three or more coats).Applying one coat of cement primer of approved brand and manufacture on wall surface:Cement primer 216.27 M2 119.80 ₹ 25,909.00
19 13.81.3 +13.82.1 Applying priming coat: With ready mixed zinc chromate yellow primer of approved brand and manufacture on steel galvanized iron/steel works:/ Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: New steel work (two or more coats) 5.22 M2 118.10 ₹ 616.00
20 5.22 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. 1457.93893129771
5.22.7A Thermo-Mechanically Treated bars TMTC-500-8mm dia. 550.00 KG 94.50 ₹ 51,975.00
5.22.7B Thermo-Mechanically Treated bars TMTC-500-10mm dia. 419.566 KG 92.60 ₹ 38,852.00
5.22.7C Thermo-Mechanically Treated bars TMTC-500-12mm dia. 400.000 KG 90.80 ₹ 36,320.00
5.22.7D Thermo-Mechanically Treated bars TMTC-500-16mm dia. 1457.940 KG 91.70 ₹ 133,693.00
21 13.11.2+ 13.36.2 Cement plaster in course sand: 12 mm cement plaster of mix: 1:4(1 cement :4 coarse sand)/Extra for providing and mixing water proofing material in proportion recommended by the manufacturers: 12 mm cement plaster 1:4(1 cement :4 sand) 30.59 M2 160.10 ₹ 4,897.00
22 S-0L01 Labour for installation of uPVC extruded casement/sliding windows and doors including scaffolding. Un Skilled labour 30.00 NO 409.40 ₹ 12,282.00
23 10.33. Providing and fixing hand rail by welding etc. to steel ladder railings & staircases railing including applying a priming coat of approved steel primer
10.33.2 E.R.W tube 40 mm nominal dia 150.00 KG 116.10 ₹ 17,415.00
24 11.37 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of ist quality conforming to IS : 15622 of approved make in colours such as white , Ivory , Grey , Fume Red , Brown , laid on 20 mm thick Cement motar 1:4 (1 cement: 4 coarse sand ) including pointing the joints with white cement and matching pigment etc., complete. 6.82 M2 686.80 ₹ 4,684.00
25 4.17. Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth. 4.89 M2 436.60 ₹ 2,135.00
26 CARRIAGE OF MATERALS
27 Extra Cost Of Material
Cements 219.00 BAGS 13.15 ₹ 2,880.00
CORRECTION FACTOR @ 0.982 ₹ 766,281.00
Total Amount with GST One Unit ₹ 807,354.00
Total Amount with GST Two Unit ₹ 1,614,708.00
Executive Entineer
Building Division, Ara
aoc.json
Purchase Order
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
3. NIT 06.pdf
NIT • 0.75 MB
1. BOQ of Watch Tower.xlsx
NIT • 0.02 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .