ADDN/ALTN TO GUEST ROOM AND SPL REPAIR TO CERTAIN BUILDINGS ETC AT NAGROTA MIL STN UNDER GE NAGROTA

Amount

Taking down chowkat or frames with shutter (without taking off shutter from the frame)area exc 1.5 Sqm but n.exc 4.0 Sqm each complete with hold fasts etc. complete all as specified & directed.

Taking down chowkat or frames with shutter (without taking off shutter from the frame) area n exc 1.5 Sqm each complete with hold fasts etc. complete all as specified & directed.

Demolition of brick work, stone/boulder masonry built in cement mortar complete all as specified & directed.

Demolition of cement concrete in ground floor and paving n.exc 15cm thickness (below & above GL) 9 reinforced complete all as specified & directed.

Demolition of cement concrete in ground floor and paving n.exc 15cm thickness (below & above GL) unreinforced complete all as specified & directed.

Demolition of cement concrete (unreinforced) of any description and any position not other wise specifically provided.complete all as specified & directed.

Demolition of cement concrete (Reinforced) of any description and any position not other wise specifically provided reinforcement cut as required to facilitate demoltion complete all as specified & directed.

Dismantling floor.hearth or wall tiling including cement mortar bedding(but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified & directed.

M&L of 25 mm thick PCC 1 :2:4 type B-0 as a sub base.to receive topping layer finished even and rough complete all as specified and as directed.

M&L for machine cut kota stone slab flooring 20-25mm thick size no less than 550mmx550mm over including 20mm thick cement screed base in cm 1 :4 laid and mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified & directed.

M&L for machine cut kota stone 12-15mm thick in riser of steps, skirting, dado and pillar laid over including 10mm thick cement screed base in 1 :3 CM laid and mixed with pigment to match the shade of the slab includingrubbing and polishing complete all as specified and as directed.

M & L Non-skid ceramic coloured tiles 8mm thick(square or rectangular) coloured joint free area of each tiles exc 0.06 sqm but not exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bedding layer of cement mortar in CM 1 :6 complete all as specified and as directed.

M & L for Non-skid coloured tiles 400x400x7mm thick as in floors set and jointed in neat cement slurry and pointed in coloured cement to match over screed bed or beddding layer of CM 1:4, 15 mm thick over complete all as specified and as directed.

M & L glazed coloured ceramic coloured tiles of size 350x 250x 7mm/ 450X 350X 7mm set and jointed in white or coloured cement to Sl-14002, match on vertical surfaces such skirting ,dados, rises to steps etc over 15mm thick rendering in cement mortar in 1 :6 complete all as specified and as directed.

M & L for Vitrified Ceramic double chart tiles 10 mm thick Light shade (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.72 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 15 mm thick screed bed in cement and sand mortar 1:4, complete all as specified and as directed.

M & L for Vitrified non skid Ceramic tiles 10 mm thick Light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm but not in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 15 mm thick screed bed in cement and sand mortar 1:4, complete all as specified and as directed.

M L for Moorum / Red bajri filling in floors or pavings, laid in layers n.exc15 cm thick spread levelled and rammed incl watering etc complete all as specified and as directed.

M&L Hard core of gauge n.exc 63 mm, deposited, spread, levelled in layers not exc 15 cm thick, watered and well rammed to a true surface complete all as specified and as directed.

M & L for 62 cm wide Udaypur green stone 15 to 18 mm thick. (table rubbed and polished) as in cooking plateform of size not less than 2 m in length, incl cutting for sink over 20 mm thick screed in CM 1:4 including roughing of existing surface and applying a coat of cement slurry @ 03 Kg/Sqm of surface and pointing with white cement 1:2 using marble dusts admixture of pigment to match. complete all as specified and as directed.

M & L for 25mm thick PCC 1:2:4 type B-1 as a sub base to receive topping layer finished even and rough complete all as specified and as directed.

M & L PCC 1 :3:6 type C2 (75 mm thick as in plinth protection & finishing the surface even & fair W/o using extra cement complete all as specified and directed.

M & L for Cement concrete 1:4:8 type D-2 using 40mm graded crushed stone agg as in any situation complete all as specified and as directed.

S&F pressed steel frame for door with two rebate incl necessary fixing lugs,hings,lock strike plate complete al as specified of size 125x60mm.complete all as specified and as directed.

S&F 2nd class hard wood, 40 mm thick plain, framed panelled shutters (any number of panels) with panels of timber flat on both sides (Feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers, fitterd to chowkhets complete all as specified and as directed.

S&F 2nd class hard wood 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc with sash bars, edges of framing plain, chamfered or rounded. Fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR part-I section 8 clause 8.24(a) , supplied and fitted to chowkats etc complete all as specified and as directed.

S & F Box type Steel windows/vent with double shutters (inside for wiremesh & out side for glass), incl guard bar.hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded including a coat of red oxide after preparation of surface before fixing.Steel window shall be conforming to relevant IS complete all as specified and directed.

S & F Box type Steel ventilators top hung double shutters (inside for wiremesh & out side for glass), incl guard bar,hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded including a coat of red oxide after preparation of surface before fixing complete all as specified and as directed.

S & F mild steel works as in bands, straps, supports or stays for rainwater, ventilating pipes incl bolts if required, hooks, hasp and staple, clamps, hold fasts , wall ties, hooks for hanging fans, plain angle cleats etc and similar works complete all as specified and as directed.

M&L PCC 1 :3:6 type C1 in hold fast etc incl all necessary formwork complete all as specified and as directed.

M & L for PCC 1:2:4 type B-1 as in benching coping etc and similar items including weathering slightly rounded or chamfered angles and throating on top of chajjas rails cills etc. complete all as specified and as directed.

Supply fabricate & fix in position anodised aluminium powder coated (minimum thickness of powder coating 50 micron) door shutter with frame, partly glazed with 5 mm thick tinted glass and partly panelled with 9 mm thick prelaminated particle board with both side decorative laminated including rubber bead joining cleat for fixing in position, aluminium door handle 150 mm size, aluminium barrel tower bolt 200 mm size etc including taking down or and making good of disturbed surface all as specified below complete all as specified and directed. (a) Frame (top & side) section shall of size 101.60 x 44.75 x 2.4 mm ( Section No 14021) (b) Vertical Members of shutter Section shall be be of size 85.00 x 44.45 x 2.00 mm (Section No 19560) (c) Top Members of shutter Section shall be be of size 83.50 x 44.45 x 2.00 mm (Section No 19581) (d) Lock rail (Middle member) of shutter Section shall be be of size 150.00 x 44.45 x 3.00 mm (Section No 19596) (e) Bottom Members of shutter Section shall be be of size 150.00 x 44.45 x 3.10 mm (Section No 19584) (f) Glazing clip for securing glass of shutters shall be be of 0.80 mm thick (Section No 19370).

S&F Anodised aluminium frame section Powder coated 100x50 mm for doors.windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

S&F Anodised aluminium powder coated door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed.

S & F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed.

S & F 5mm thick plain colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site.complete all as specified and as directed.

S & F Solid PVC Door Frames of size 50mm X47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.

S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain PVC sheets for top rail lock rail and bottom rail on either side and as gap insert for top rail and bottom rail panelling of plain colour PVC sheetto be fitted in the MS frame welded/sealed to the styles and rails with suitablePVC sheet beading and joined together with solvent cement, suppling and fixing in the frame at site as per specification and drawings. complete all as specified and as directed.

S & F 5.5mm thick Sheet glass.ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane. complete all as specified & directed.

S& F in 3mm thick sheet glass, ordinary qaulity,in sqaures n exc 0.5 sqm each panes etc complete all as specified & directed.

All as per item No 39 above but 4 mm thick figured glass complete all as specified & directed.

S & F Sheet glass 4mm thick, ordinary quality and glazing fixed with aluminium section in squares not exceeding 0.5Sqm in each pane complete all as specified & directed.

S & F Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified & directed.

S&F 75mm long butt hinges (medium weight) colled rolled mild steel complete all as specified & directed.

S&F 100 mm butt hinges, medium weight cold rolled mild steel. complete all as specified & directed.

S&F 150mm long aluminium anodised barrel tower bolt of extruded section and fixed.complete all as specified & directed.

S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast i aluminium alloy and fixed complete all as specified & directed.

S&F 250mm long aluminium alloy, anodized sliding door bolt with hasp stapple ( bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed. complete all as specified & directed.

S&F 150mm long aluminium handles cast type, anodised and fitted.complete all as specified & directed.

S&F Extruded aluminium alloy handles fabricated type anodised of size 100mm long 12mm dia. complete all as specified & directed.

S&F 300mm long ordinary MS rat tail rod pattern springs incl roller and roller platecomplete all as specified & directed.

M&L two coats of synathetic enamel paint over a coat of pink primer on new wood or wood surfaces, over 10 ems width or girth incl \ preparation of surfaces complete all as specified & directed.

S&F in repair harrison rails, mild steel, chromium plated with fixing brackets, stops, roller etc complete all as specified & directed.

S&F CP Curtain rods of 20 to 25 mm dia fixed on wall including funnels and brackets in any position as in repair complete all as specified and as directed.

M & L brick work with sub class B bricks straight or curved on planexc 6 m mean radius built in cement mortar 1:4 complete all as specified and directed.

M&L brick work with sub class B bricks straight or curved on plan exc 6m redius in CM 1 :6 complete all as specified & directed.

All as per item No 55 above but in half brick thick walls built in CM 1:4. complete all as specified & directed.

Taking down cement plaster on brick or stone walls etc. including raking out joints hacking for keys scrubbing down with water etc complete all as specified & directed.

M&L rendering 15mm thick in two layer (1st layer 10mm thick and 2nd layer 5mm thick including WPC) on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished with even and smooth w/o using extra cement. Note: (i) WPC will be measured and paid separately.

M&L rendering 10mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:6 finished with even and smooth w/o using extra cement complete all as specified & directed.

M&L for Rendering 5 mm thick in CM (1:3) on ceiling finished even and smooth without using extra cement including three coat of white wash on ceiling including preparation of surface .

M&L for Forming square grooves in plaster n exc 12mm deep and n exc 15mm on face complete all as spd & directed.

Supply only Liquid water proofing compound , complete all as spd & directed.

M&Lfor Two coat of white wash on newly /old plastered surface on wall including preparation of surface.

M & L for Preparation of new plastered surfaces of ceiling and applying two coat of white washing,complete all as spd & directed.

M & L for Preparing of newly plastered surfaces of walls and applying two coat of cement base paint over a coat of white wash.

M & L for Preparation of newly plastered wall surfaces and applying two coats of oil bound distemper after proper finishing of surfaces with Birla white putty finishing work/ chalk whitening preparatory to distempering including preparation of surface complete, all as specified and as directed by Engr-in-Charge

M&L for Complete removal of existing treatment applying two coats of oil bound distemper over a coat of wall putty 2 to 3mm thick on plasterd surfaces preparatory to distempering on wall surface .

M&L for Complete removal of existing treatment applying two coats of cement base paint old wall surface .

M&L three coats of white wash on new plastered surface of walls including preparation of surfaces.complete all as spd & directed.

All as per item No 69 above but in ceilings. complete all as spd & directed.

M & L for Preparation of old plastered surfaces of ceiling and applying two coat of white washing, all as specified.

M & L for Preparing old plastered surfaces of wall and applying one coat of cement based paint all as specified .

M & L for Preparing old plastered surfaces of wall and applying one coat of oil bound distemper etc all as specified .

Dismantling of Asbestos cement (corrugated,semicorrugated, etc.) sheets in roof coverings in any position

S & F Pre-painted galvalume aluminium zinc coatingn GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified

S & F Pre-painted galvalume aluminium zinc coatingn GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge, hips, valley gutter, drip and straight flashing fixed with self tapping screws as specified

Dismantling of Ceiling Board (Fibre, Pulp, Insulation etc.) or Insulation of Boards/Slap /Blankets, any thick-ness with frame work including Cover Fillets Cornices etc. and Serviceable Ceiling Board and Cover Fillets, etc., keep in Safe Custody for re-use, complete all as specified and as directed.

M & L 6mm thick Asbestos cement plain building boards, fixed to timber framework with screws and applying three coats of white wash complete all as specified and directed by Engineer-in-charge

S & F Anodised aluminium snap grid frame work for false ceiling all as specified all as specified and directed

S & F rolled mild steel in roof trusses(framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing(Beam,tee, angle, channel or flat sections)incl distance pieces, cleats, etc conforming to grade Fe-410W-(Gde E-250 Quality A)

S & F MS work framed brackets of angles or tees with web and flanges cut to shape drilled and couter sunk for screw, including bending and welding angles, as necessary, gusset plates, riveting etc. n.exc 10 kg each brackets conforming to Fe 410-0 or Fe 310-0

S&F Framed work rolled section as in framing compound girder staging for end bars, shouldered and riveted, forged into spikes, framed guard bars, dooriron, ladders walk rails, railings, frame work for tanks, water tank,cooler frame as and the like built up from two or more beam or channel section or angles with plates stiffeners etc complete.

Preparing new steel surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a priming coat of red oxide complete all as specified and directed.

Preparing old steel surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

S & F 150MM Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as spd & directed.

S&F vitreous china squatting pan Orrisa pattern 580x440mm white with integral foot rest (excluding flushing cistern) fixed in repairs complete all as spd & directed.

S& F in repair PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve float and handle including brackets (10 ltr) including mild steel tube 32mm dia flush pipe.

Vitreous china wash down closet pan (Pedestal pattern) white with ‘S’&'P' trap plastic seat cover white including connection to out going pipe & to flushing pipe, anti syphonage pipe etc complete all as specified and directed by Engineer-in-charge (including making good to floor and fixing in repairs)

S&F Vitreous china wash down closet pan Single piece (Pedestal pattern) white with ‘S’&'P' trap Concealed flushing cistern, plastic seat cover white including connection to out going pipe & to flushing pipe, anti syphonage pipe etc complete all as specified and directed by Engineer-in-charge \.

S & F Vitreous China urinals, bowl of size 465X355X265mm white colour type flat back type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as spd and directed

S & F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as spd & directed.

S&F Vitreous china urinal partition white of size 310x700 mm. complete all as spd & directed.

S & F in repairs,Plastic water closet seat cover, white closed pattern with flat bottom and cover and Brass chromium plated hinging device.

Supply and fixing in repairs CP brass jet spray with flexible pipe not less than 90 cm long fixed to EWC suitable for 15mm bore complete all as specified and directed at site

S&F for heaith faucet (ABS body) mild steel 15mm dia pipe 1.25mtr long flexible tube wall hook and fiting to the connection all as directed by Eng-in-charge

S&F Toilet paper holder chromium plated fixed as in repair of Make : Cera/Parryware complete all as specified and directed.

S&F as in repair 110 mm PVC (SWR) WC Connector with lip ring

S&F in repair vitreous china wash basin agle back, size 600x480 mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets all as specified and as directed .

S & F in repairs,Wash basins, vitreous china white (flat back or angle back type) of oval shape counter top, excluding taps, waste chain and plug and porcelain stopper but including brackets and 32mm dia waste fittings brass chromium plated with long screwed shanks and fly nuts, 32mm x 600mm long PVC waste pipe complete flange end bedded in red lead cement and other end fixed as in repair complete all as specified and directed by Engr-in-Charge. Make : L&K/ Jaguar/Goldline/Cera.

S&F in the wall soap dish, vitrious china white, approximate size 160x160x90 in repairs complete all as spd & directed.

Taking up or down 15mm bore steel tubing and connections.including cleaning for refixing or removal to store.

S & F 15 mm dia GI tubing medium grade with all fittings and fixed complete to walls or laid in floors. complete all as spd & directed.

M & l for Cutting chases, pinning in, making good to facing where rerquired and poi~ting in cement mortar 1 :3 to ends or edges of landings,steps, c1lls, sunshades, shelves, lintels.etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10 cm girth in brick walls

Taking up or down 20mm bore steel tubing and connections.including cleaning for refixing or removal to store. complete all as spd & directed.

S & F 20mm dia GI tubing medium grade with all fittings and fixed complete to walls or laid in floors.

S&F in repair Shower rose brass chrominium plated 125mm size complete all as spd & directed..

S & F in repair 15mm bore Bib taps, chromium plated fancy type with crutch or butterfly handle, screwed down screwed for brass ferrule and fixed.

S&F in Brass CP mixer for mixing hot & cold water screwed down for iron pipe , screwed for iron pipe 15mm dia/ bore of pipe.complete all as spd & directed.

S&F in repairs, CP brass Sink mixure for cold and hot water screwed down 15mm bore complete all as spd & directed.

S & F in repair 15 mm bore pillar taps fancy type cast copper alloy chrominium plated fancy typewith capstan heads, chromium plated, screwed down high pressure with or without lettered "Hot or Cold" with long screwed shanks and fly nuts screwed for iron pipe.

S&F in repair 15mm bore Stop valve fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed bath ends for iron pipe or fixed union and fixed. complete all as spd & directed.

Ditto as per item No 111 above but with long shank and cup ( concealed type)

S&F in repairs gate valves 20mm dia with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

S&F PVC connection 15 mm size with PTMT nuts 450 mm long.

S&F in repair Glass comer Shelf of 300mm long as specified and directed by Engr-in-Charge

S&F Glass Shelf 550mm x 100mm Size with stainless steel rail in two row complete all as specified and directed by Engr-in-Charge.

M&L for 75mm dia cast iron Nahani Trap, with grating including jointing to waste pipe fixed in concrete type 81 (1 :2:4complete all as spd & directed.

M&L for PVC SWR gully trap 1251110mm, setting and jointing with solvent cement with grating including jointing to waste pipe fixed in concrete type B1 (1 :2:4) complete all as spd & directed.

S&F Towel rail 600mm long of PTMT fixed with including chromium plated brass screws and wooden/plastic cleats ( Minimum weight 190gm).complete all as spd & directed.

S&F in repairs brass chromium plated tubular towel rail,20mm dia, D type, 60cm long between flage. complete all as spd & directed.

S & F in PVC connection 15mm size with PTMT nuts of length 600mm complete all as spd & directed.

Dismantling of water tanks and removing to store of capacity exc 250 Ltr & N exc 500 ltr etc all as specified.

S&F 500 ltr capacity Rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified.

S&F 1000 ltr capacity Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as spd & directed.

S&F 20 mm dia Ball valve PTMT valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule.complete all as spd & directed.

S&F 25mm dia ball Brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipes or brass ferrule and fixed as in PVC Service tanks all as directed.

S & F viterous china Urinal bowl white, flat back size 465x35x265, with grating and union for discharge pipe (excluding flushing cistern,flash pipe, and wate pipe) as fixed in repair complete all as spd & directed.

S&F Vitreous China wash basin, white, flat back, size 550 x 400 mm excluding taps, waste chain and plug and porcelain stopper but including brackets complete all as spd & directed.

S & F sinks made of stainless steel 1 mm thick Kitchen or Laboratory with plugs , washers and waste pipe and CP waste couplings etc, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe , overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm as fixed in repairs complete all as spd & directed.

M& L Reinforced cement concrete (Nominal Mix) Type B1 1:2:4 using 20mm graded aggregate in Slabs supported on walls,beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as spd & directed.

M & l for Providing precast cement concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregate as in cover slab and similar articles including necessary moulds/formwork set in cement mortar (1:6) complete all as specified

M & L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

M & L for Mild steel TMT bars 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Ditto, but 5mmdia and over upto and including 10mm dia in stirrups,spacer and binders. complete all as spd & directed.

Dismantling cast-iron/PVC pipes including fittings taking out of trenches or walls as required dia of pipe upto 100mm.complete all as spd & directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls for 110mm bore.complete all as spd & directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floor for 110mm bore.complete all as spd & directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls for 75mm bore.complete all as spd & directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floor for 75mm bore.complete all as spd & directed.

S&F PVC (SWR) Bends any radius for 110mm bore.complete all as spd & directed.

S&F PVC (SWR) Bends any radius for 75mm bore with oval access door.complete all as spd & directed.

S&F PVC (SWR) vent cowl 75mm complete all as spd & directed.

S&F stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall pipe complete all as specified and directed.

S&F PVC (SWR) floor trap with grating including jointing to waste pipe in solvent for 75mm bore including CP grating cover with or without hole complete all as spd & directed.

S&F in repairs Grating doom 125 mm dia with waste hole of PTMT Minimum weight 40 gms complete all as specified and directed.

S&F for PVC(SWR) gully trap 125/110mm setting and jointing with solvent cement complete all as spd & directed.

S&F PTMT waste coupling of 32mm dia for wash basin/urinal all as specified and directed.

Demolition of cement concrete (unreinforced) as in Roofs, floors (other than ground floors), beams, staircases, landing, chafias and similar suspended work. complete all as spd & directed.

Dismantling brick tiles or terracing tile, single layer on roof including cleaning the roof surface and filling the cracks with silicon compound if obsserved on roof complete all as spd & directed.

M&L Providing, cement concrete Type 8-0 (1 :2:4) (12.5mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and dircted.

M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1 :4 complete all as specified and dircted.

Applying bituminous primer @ 0.40 litre per Sqm over plastered surfaces of roof including parapet surfaces.complete all as spd & directed.

M&L Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces.complete all as spd & directed.

M&L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified.

M&L for Cement concrete tiles 25 cm x 25cm x20mm thick machine pressed set jointed and pointed in neat cement slurry on roof over APP membrane laid over 15mm thick cement screed bed in cement mortar 1:6 complete all as spd & directed.

M & L for PCC (1:2:4) type B1 using 20mm graded stone aggregate as in drain and surface channel complete all as specified (Forming fair finished to drain/channels shall be measured and paid for separately.) complete all as spd & directed.

M/L for PCC (1:3:6) Type C1 using 20mm graded stone agg as in surface channel & drain incl form work.complete all as spd & directed.

M/L for extra for forming fair finished drain or channel 30 cm inner girth of cement concrete using extra cement including forms moulds, mitred/ stopped ends etc. complete all as spd & directed.

M & L for Cutting into existing manhole for connecting new drains and making good to pipes and rendering cutting out existing benching for and forming branching for and forming branch channel (1/2 round or 1/4 section ) in PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) smooth finished and reforming benching for 150mm to 200mm dia of pipe, complete all as specified and directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or reinforced concrete ) and set in cement mortar all as spd and directed by Engr in Charge.

S&F in repairs 150mm dia Reinforced concrete pipes ,class NP-2 laid and jointed complete all as spd and directed

M & L 100 mm cement concrete 1:4:8 type D-2 in bed to drain pipes incls packing under, and haunching against the sides of pipes after they are laid and tested of bore 150mm dia drain pipe complete all as spd and directed.

M& L for Surface dressing n exc 15 cm deep in any type of soil complete all as spd & directed.

Surface excavation nexc 30cm and averaging 15cm deep in soft/hard soil complete all as spd & directed.

Excavating in trenches n.exc 1.5M wide ad n.exc 1.5M in depth; for foundation, etc n.exc 10 Sqm on plan and n.exc 1.5M in depth and getting out in any type of soil.

M&L Cement concrete type D-2 1:4:8 (40mm graded crushed stone aggregate) in foundations, filling and mass concrete. complete all as spd & directed.

M&L form work to sides of concrete foundations, footings, plinth beams, bases of columns for flat rough finished surfaces on concrete complete all as spd & directed.

M&L form work to sides of columns, posts etc for rough finished flat surfaces of concrete complete all as spd & directed.

M&L RCC M-25 (20mm graded stone aggregate) as in footings and plinth beams.complete all as spd & directed.

M&L RCC M-25 (20mm graded crushed stone aggregate) as in Coulmns.complete all as spd & directed.

M&L Form work to soffits of suspended slabs supported on walls such as roof slabs n.exc 200mm thick for rough finished surfaces.

M&L form work to edges of concrete flats, roofs n.exc 20cm wide and sides of RCC slab for rough finished surfaces.complete all as spd & directed.

M&L RCC M-25 (20mm graded stone aggregate) as in slabs supported on walls. complete all as spd & directed.

M&L form work to floor beams lintel beam and roof beams including supports, for rough finished surfaces of concrete complete all as spd & directed.

Reinforced cement concrete (design mix) M-25 (using 20mm graded crushed stone aggregate) as in roof beams, cantilivers, bressummers, lintels over 1.5 m span complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25cm.complete all as spd & directed.

Removing excavated material to a distance n.exc 50M and depositing where directed at a level n.exc 1.50M above the starting point.complete all as spd & directed.

M& L for Providing reinforced cement concrete (Design mix) M-25 (20 mm graded crushed stone aggregate) as in Chajjas complete all as spd & directed.

Supply only integral water proofing compound.complete all as spd & directed.

S&F Galvanised steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm.complete all as spd & directed.

S&F Glazing with figured glass(Frosted), pin head type, 5mm thick, and glazing with oil putty and glazing pins in squares not exceeding 0.5 Sqm in each pane.complete all as spd & directed.

M& L for Hardcore of gauze n.exc 63mm deposited spreaded and leveled in layers n.exc 15cm thick with broken stone or boulders(150mm thick) including rolling with power roller 8 to 12 ton capacity complete all as spd & directed.

M& L for 75mm thick Cement concrete type C-2,1:3:6 using 40mm,graded stone aggregate as in footpath complete all as spd & directed.

M& L for chequered cement conrete tiles of size 20 cm X 20cmX 25mm thick (with grey cement and pigments) set, jointed and pointed in neat cement slurry in floor, laid over and incl 15mm thick cement screed base in CM 1:6 laid and jointed with grey cement slurry complete all as spd & directed.

M & L Sand for 50 mm thick filling under interlocking paver block including watering and consolidation complete all as specified & directed.

M&L machine pressed coloured pre cast concrete interlocking paver block ( with grey cement and no pigment) any shape and size confirming to IS -15658-2006 of 80 mm thickness ,Electrovibro (M-40 grade) galzed finished block complete all specified and directed by Eng-in-charge and GE

S&F in Kitchen cabinets made out of PVC sheet board 19mm thick including making drawers, partitions, shelves and PVC board on all sides with following specifications and as directed by Engineer-in-charge:-(a) 19mm thick PVC solid flush board with 5mm thick pre-laminated sheet fixed on one side, as kitchen cabinet. (b) Frame of size 50mmx47mm. (c) Shutters having piano hinges and brass handle 75mm long No for each shutter. (d) Bottom back and sides of cabinet covered with 19mm thick PVC board with 5mm thick pre-laminated sheet fixed on one side. (e) Drawers having one brass handle 75mm long and two long sliding rails for each drawers. (f) Cabinet must have one drawers supported of sliding rails. (g) Size of each cabinet shall not be exceeding 0.9 M x 0.75 M and 0.60 M depth. (h) Measurement will be considered only for front face i.e. length & height & depth 0.50m. Note: Measurement for purpose of unit payment shall be on external face for width x height (considering frame).

SCHEDULE A (PART-II)Taking down carefully unserviceable Aluminium point wiring complete (light, fan socket, bell or power) with fitting such as switches, ceiling rose lamp holder, regulators, sockets, light fittings etc. and keeping in safe custedy for taking credit all as specified and as directed by Engr-in-Charge

Taking down ceiling fan/ Ex fan any sweep, removing blades ,cleaning the fan completely for dust and dirt, oiling & greasing and hanging the same back to its original positions including connecting with three core flexible copper wire to ceiling rose etc after the completion of the point wiring including replacement of old unserviceable fan hook, rubber pad, nut bolts and washers etc, complete, all as specified and directed by Engr-In-Charge.

M&L for point wiring with PVC insulated unsheathed 1100 volt grade FRLS cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium grade ISI marked not less than 20 mm dia medium grade ,concealed in wall and surface on ceiling with all conduit fittings & fixing acessories for modular switches/ socket etc. with and including 1.5 sqmm FRLS multi stranded copper conductor drawing as continuous earth wire connected to main earth and earth dolly for one light point / fan point / bell point controlled by one switch 5 Amp complete all as specified and directed. .

All As per Srl item N0 191 above but for one socket out let 5 Amp controlled by one switch on same board with other switch .complete all as specified & directed.

All As per Srl item N0 191 above for one socket out let 5 Amp controlled by one switch on independent board with other switch complete all as specified & directed..

All as per item No 191 above here in before but point wiring with 2.5sqmm FRLS multi stranded copper conductor cable for main circuit and 2.5sqmm cable as earth continuity conductor for one 15 Amp socket out let controlled by one 15Amp switch on independat board complete all as specified and directed.

All as per item No 191 here in before but point wiring with 4 sqmm FRLS multi stranded copper conductor cable for main circuit and 4 sqmm cable as earth continuity conductor including by two pin and earth plug and socket complete with one signle pole MCB 32 amp 240V complete all as specified and directed.

S & F Modular snap switch SP one way 5/6 Amps suitable for 1 Module complete all as specified and directed.

S & F Modular socket 5 pin 5/6 Amps suitable for 2 Module complete all as specified and directed. .

S & F Modular snap switch SP one way 15/16 Amps suitable for 1 Modulecomplete all as specified and directed.

S & F Modular socket 5/6 pin 15/16 Amps suitable for 2 Module complete all as specified and directed.

S & F Modular Fan step Regulator electronic, 120 watts 2 Module complete all as specified and directed.

S & F Modular blanking plates 1 module complete all as specified and directed.

S&F of ceiling rose 3 terminal complete PVC/Polycarbonate isolated boly complete all as specified and directed.

S&F for lamp holder PVC/polycarbonate type with back plate suitable for batten fittings along with 10 watt LED bulb complete all as specified and directed.

Supply and fixing LED lights fitting 1x 18 W, 220V, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing swing type wall mounting fan 400 mm sweep single phase AC 230/240V complete for wall mounting incl grouting, holding down bolts, nuts, and provision of flexible copper conductor cable 3 core 23/0.0076 size from ceiling rose to fan complete all as specified and directed.

S&F (VTPN) sheet metal enclosure double door for distribution board factory made for MCCBs DB load link TPN 4 way suitable for MCCB as incomer, 125 Amp,4 pole. (when MCB's are to be used) with suitable size of busbar including 125 A MCCB as incomer 16 KA complete,fixed flush in wall including chases wall for fixing DB and making good the distributed wall surfaces to match with existing specification including taking down all as directed by Engr-in-Charge at site incl taking out of exsing UNSV DB with MCBs complete all as specified and directed.

S&F MCCB 125A 4Pole 16KA 415 Volt with fixed magnetic and fixed thermal setting complete all as specified and directed.

S&F sheet metal enclosure distribution board SPN 12 way 230 V, 50 Hz double door with neutral, Earthing bar and din rail complete incl taking out existing UNSV DB with MCBs.complete all as specified and directed.

S&F sheet metal enclosure distribution board SPN 8 way 230 V, 50 Hz double door with neutral, Earthing bar and din rail complete all as specified and directed.

S&F MCB SPN 40 A to 63 A 10 KA 240 volts "C" series complete all as specified and directed.

S&F MCB single pole 5 to 32 Amps 10 KA 240 volts "C" series complete all as specified and directed.

S&F Bollard light of 12 W capacity ,Sturdy IP 65 LED Bollard with excellent light out put through its PMMA windoe ensuring maximum illlumination aspect in surrounding transmission acrylic cover complete with all accessories including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. Bollard pole should be properly placed at a distance of 8 feet from each other with PCC base at ground level. All the Bollard light should be controlled though a fidder piller box prices of the same is deemed to be included in this job.

M&L for sub main wiring with two single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 10 Sq mm drawing through and including concealed rigid non metallic PVC conduit medium grade ISI marked 20 mm dia including one single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 10 sq mm as earth continuity conductor connected to commen earth and earth dolly complete incl taking out existing UNSV service connections.

Supply, laying, jointing and testing XLPE insulated PVC sheathed armoured under ground cable heavy duty with aluminium conductor LT 1100 V grade cross sectional area 25 Sqmm 4 core, complete all as specified and directed by Engineer-in-Charge

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 16 sq. mm 2 core nominal cross section in service connections complete all as specified and directed.

Excavation in trenches in any type of soil not exc 1.5 mtr in depth and 1.5 mtr wide and getting out for laying of cables complete all as specified and directed.

Returning and filling in including spreading, leveling , watering and well ramming in layers not exceeding 25 cm thick excavated earth complete all as specified and directed.

Removal of surplus soil to a distance not exceeding 50 mtr and depositing at a level not exceeding 1.5 mtrs above the starting point complete all as specified and directed.

S&F of DWC pipe for protection of cable from underground of Dia (od x id) 40x32 mm incl coupler and other accessories as required at site all as specified and directed by Engr-In-Charge.

M&L in replacement of sub main wiring with two single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 06 Sq mm drawing through and including concealed rigid non metallic PVC conduit medium grade ISI marked minimum 20 mm dia including one single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 06 sq mm as earth continuity conductor connected to commen earth and earth dolly complete including taking down existing UNSV complete all as specified and directed.

S&F building security light luminaries energy saving and envirnment friendly long life LED light of 25W made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP66 protection and Impact resistanve of IK07, including MS Bracket light grade 25 mm dia, 1.2 m long bend in shape fixed on wall having an angle 120 degree, fixed with and suitable size nuts, bolts and washers etc including taking down of existing light fitting and complete ,all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) compatible conventional fan regulator. complete all as specified and directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed.

Supply and fix Exhaust Fan made of sturdy Engineering plastic complete with louvers shutter,voltage 230V, 50 Hz, RPM 1200 , copper winding of sweep 300mm complete all as specified and directed.

M&L for earthing complete for bldg with galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected to galvanized earth wire 4.00 mm dia by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, PCC (concrete chamber of size 300 mm x 300 mm x 300 mm inside dimension) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate with fair finish , internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire mesh of 22 gauge, 80 mm thick PCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM, JALLI pit shall be filled with charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I (2009) as specified including provision of 15mm dia medium grade GI pipe for earth wire protection and 20 mm dia for watering complete , all excavation and earth work & connecting the earthing to an earthing test point / main switch board as specified and testing on completion complete all as specified and directed.

Supply and laying in trenches/on piller/on wall GI water tubing 20 mm bore dia medium grade ISI marked with all fitting (such as tee,elbow,socket,union,short, pieces) including testing etc. complete all as specified and directed. Note:(Exacavation and earth work shall be measured and paid separately)

S & F Gunmetal globe or gate valves (brass insert),with iron wheel head screwed both ends for iron pipe size 20 mm dia all as specified and directed by engr -in charge.

M & L for Cutting of existing pipe laid any size dia for inserting Tees for new connection of 20 mm dia complete all as specified and directed .

ASHWANI KUMAR KHAJURIA AND SONS (BID ID -3292056)

R.K. Works (BID ID -3291740)