Loading…
Loading…
Tender Value
Refer Docs
Closing Date
3 Jun 2026, 2:30 pmClosed
Single Packet
Normal Tender
No
Not Applicable
Itemwise/Consigneewise
Lowest to Highest
TPI Agency
Not Applicable
90 days
Expenditure
General
51
4 conditions · 2 needing a document upload
The tenderer must have supplied the same / similar item to this Railway or another Zonal Railways / Production Units. Documentary evidence (such as R/Notes, Inspection Certificate etc.) must be furnished along with the offer evidencing the execution of such purchase orders.
(1) Bidder should be OEM or authorized dealer of OEM. Dealers should attach Tender Specific Authorization issued by OEM without which their offer will be summarily rejected. (Please refer para 3.4 of Part-B of Sr tender conditions for Procurement from (OEMs) manufacturers or authorized agent / dealers) (2) The bidder must have successfully supplied at least one (01) Cable Drag E- Chain System of any capacity to Indian Railways/any Government Department or any Public Sector Undertaking during the last five financial years and the current financial year up to the date of tender opening. For the purpose of this criterion, since the item falls under Machinery & Plant (M&P), the term %u201Csupply%u201D shall include supply, installation, and commissioning of the Cable Drag E-Chain System. (3) Supporting documents as proof of credentials such as R.Note / CRN/ joint commissioning report / Proven Test Certificate / Performance certificate shall be submitted by the bidder along with their offer and the onus to prove successful supply and commissioning in the stipulated time frame lies on the bidder. Offers submitting credential orders unaccompanied with proof of supply, installation and commissioning are liable to be ignored.
Accepted Makes: : Acceptable Make/Brand : Make: IGUS, TSUBAKI, KABELSCHLEPP, MITOOL, CONTOL WELL, SILVERLINE, CKS, RS COMPONENT & CONTRO Only ACCEPTABLE OR ELSE SUMMARILY REJECTED. Bidders should clearly indicate the Makes offered by them along with Detailed technical Specification, brochure, failing which offers would be rejected.
Tenderer should mention clearly about their Make/Brand in their offer.Railway reserves the rights to pass over the Firm's offer, those are quoting other than tendered Make/Brand.
28 conditions
Deviations: Technical/Commercial deviations if any should be recorded in the Techno - Commercial Tabulation field itself. If it is attached in the Annexure or as attachments the same are liable to be ignored.
PUBLIC PROCUREMENT POLICY (Preference to Make in India), please refer Para 16.0 Part B of Southern Railway Tender Conditions: Procurement of the item is restricted to Local suppliers with minimum local content of 20% (Class-I or Class-II Local supplier as defined in Railway Board letter No.2020/RS(G)/779/2/Pt.1 dated 25.09.2020 & 2020/RS(G)/779/2/Pt.1 (E3322671) dt.20.08.2024) only and the vendors who do not qualify to be "Local suppliers" (i.e., "Non-Local suppliers" with local content less than 20%) should not quote in the tender as their offers shall not be considered for any ordering. In case any vendor who does not qualify to be a "Local supplier" for the tendered item participates in the tender, it does so at it's own risk and cost and Railways shall not be liable for any loss or damage caused to the vendor. Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as Incorporated in the tender condition.
(i) Please refer para 15.0 of part - B of "SR TENDER CONDITIONS" for details regarding "BENEFITS OF MSE AS PER PUBLIC PROCUREMENT POLICY". (ii) MSE firms should submit a copy of valid MSE Certificate at the time of submission of their bid. (As the validity of Udyog Aadhar Memorandum was up to 30.06.2022 it is not considered as a valid document for availing MSE preference).
HSN CODE 8607 and SOUTHERN RAILWAY / TAMILNADU GST NO. 33AAAGM0289CIZQ - (i) Firms with MSME /NSIC Certificate for subject item are requested to submit the same for eligibility towards purchase preference. ii) a) The offers shall be evaluated based on the GST rate as quoted by each bidder and same will be used for determining the inter se ranking. While submitting offer, it shall be the responsibility of the bidder to ensure that they quote correct GST rate and HSN number. b) Purchaser shall not be responsible for any misclassification of HSN number or incorrect GST rate if quoted by the bidder. c) Wherever the successful bidder invoices the goods at GST rate or HSN number which is different from that incorporated in the purchase order, payment shall be made as per GST rate which is lower of the GST rate incorporated in the purchase order or billed. d) Vendor is informed that she/he would be required to adjust her/his basic price to the extent required by higher tax billed as per invoice to match the all inclusive price as mentioned in the purchase order. e) Any amendment to GST rate or HSN number in the contract shall be as per the contractual conditions and statutory amendments in the quoted GST rate and HSN number, under SVC.
Tenderers shall confirm the following declaration failing which the offer is likely to be ignored. " I have read the clause regarding restrictions on procurement from a bidder of a country which shares a land border with India.I certify that this bidder is not from such a country or,if from such a country,has been registered with the Competent Authority.I hereby certify that this bidder fulfills all requirements in this regard and is eligible to be considered.Where applicable,evidence of valid registration by the Competent Authority shall be attached."
Failure consequences: In the event the firm fails to execute the contract within the stipulated delivery period, the Purchaser shall be entitled to impose liquidated damages for any extension of the delivery period. Further, if the supplier, for any reason, fails to deliver the goods in whole or in part in accordance with the contractual terms and conditions (as amended from time to time), the Purchaser reserves the right to recover damages from the supplier, not as a penalty, but by way of compensation, equivalent to the value of the security deposit for the entire contract. Such damages shall be treated as outstanding recoveries against the vendor and shall be dealt with accordingly.
OEMs can authorize and give Tender Specific Authorization to its Agent / Dealers to quote on their behalf provided the vendor takes full responsibility for the quality of the material including warranty obligation and the inspection of product against Railways order is carried out at the manufacturers premises.Please refer para 3.4 of Part-B of Southern Railway Tender Conditions attached with this tender.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Delivery Terms : FOR Destination.
Mode of Despatch : By Road/Rail
Ambiguous offer will be summarily rejected. Terms of offer must be specific and unambiguous
1 condition
I/We have carefully gone through the IRS Conditions of Contract, 2025 particularly Clause 20 pertaining to "Code of lntegrity: Misdemeanours and Penalties" and the provisions regarding Code of lntegrity, Obligations for proactive disclosures, Misdemeanours, Penalties for misdemeanours . I/We hereby certify that no other concerns or affiliates (such as having common partner/director/promoter/owner/ holding company decision control etc.) have participated in this tender which can give rise to a conflict of interest or fall under anti- competitive practices. We understand that the offers of all such sister concerns including ours are liable to be rejected as per relevant provisions of IRS terms and conditions, and enclosures. I/We, affirm that we shall abide by the Code of Integrity in general, with specific reference to conflict of interest, anti competitive practices and obligation to proactive disclosures. I/We understand that we are fully responsible for the above declaration and it shall not be the Railway's responsibility to verify the same. I/We are aware that we shall be liable for all consequences of violation of Code of Integrity, if detected, at any stage.
1 location across Tamil Nadu · 3 Set total
Supply, Erection, testing and commissioning of Cable Drag E-Chain system in 5 Ton AC EOT crane holding Capacity of Main hoist motors 12.0 HP,
51256710A
51256710A
Open - Indigenous
Goods
Tamil Nadu
₹0
Exempted
3 Jun 2026
17 May 2026
1 item · 3 Set total
Supply, erection, testing and commissioning of Cable Drag E Chain system in 5 Ton AC EOT c rane holding Capacity of Main hoist motors 12.0 HP, Long travel motor 9.0 HP Cross travel motor 3.5 HP ha ving span length of 14.5 Meters with details of necessary copper cables and accessories enclosed separate ly. (Note: Existing old Festo cable trolley system has to be removed and handover to Railway) Make: IGUS, TSUBAKI, KABELSCHLEPP, MITOOL, CONTOL WELL, SILVERLINE, CKS, RS COMPONENT & CONTRO Only. [ W arranty Period: 12 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/E/LW/PER, SR | Tamil Nadu | 3.00 Set |
| Total | 3 Set | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
5696773.pdf
ATTACHMENT
5696804.pdf
ATTACHMENT
5696800.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .