Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹36,000
Closing Date
22 Jun 2026, 5:30 pm
- ARUN KUMAR DHRUW(DFLT)
MUNICIPAL CORPORATION, RAIPUR
15 वें वित्त आयोग अंतर्गत वर्ष 2022-23 हेतु प्राप्त राशि से स्वामी आत्मानंद सरोवर कर्बला तालाब में उद्यान विकास कार्य। (शेष कार्य )
192633
NIT NO:92/ZONE 07/2026 RAIPUR DATED:05/06/2026
RESTRICTED TENDER
WORKS
MUNICIPAL CORPORATION
Required Past Technical Experience: AS PER NIT
Required Financial Turnover (in INR): AS PER NIT
Required Bid Capacity (in INR): AS PER NIT
13 documents required · 13 mandatory
Urban Administration and Development Department (UADD)
WORKS
- ARUN KUMAR DHRUW(DFLT)
RESTRICTED TENDER
MIXED PERENTAGE ITEM RATE
A B C
MUNICIPAL CORPORATION, RAIPUR
TENDER SECTION
COMMISSINOR, MUNICIPAL CORPORATION, RAIPUR
120.00
No
10
192633
22 Jun, 2026 5:30:00 PM IST
24 Jun, 2026 11:30:00 AM IST
5 Jun, 2026 5:30:00 PM IST
NIT NO:92/ZONE 07/2026 RAIPUR DATED:05/06/2026
15 वें वित्त आयोग अंतर्गत वर्ष 2022-23 हेतु प्राप्त राशि से स्वामी आत्मानंद सरोवर कर्बला तालाब में उद्यान विकास कार्य। (शेष कार्य )
36000.00 INR
Fixed Deposit Receipt (OFFLINE)
2
23 Jun, 2026 5:00:00 PM IST
2723940.50
AS PER NIT
AS PER NIT
AS PER NIT
06
0.00 INR
17d 0h 37m
13 documents required · 10 mandatory · 3 optional
₹0
₹36,000
5 Jun 2026
5 Jun 2026
24 Jun 2026
5 Jun 2026
22 Jun 2026
5 Jun 2026
23 Jun 2026
MUNICIPAL CORPORATION RAIPUR
Name of Work :- 15 वें वित्त आयोग अंतर्गत वर्ष 2022-23 हेतु प्राप्त राशि से स्वामी आत्मानंद सरोवर कर्बला तालाब में उद्यान विकास कार्य। (शेष कार्य )
S.N. PARTICULARS Qty. UNIT RATE
1 Swing Two Seater Height 3 mtr. Width 13.0m Clamp -S.P.Casting clamp with bearing fixing with yhe upper body of pipe with support of 40x5 flat. Seat capacity - 2 nos. F.R.P. laminated steel sheet with the support of 30x30x3 angle and 25x5 flat. Main frame - 50x2.5mm (thickness) @ NB. Pipe Frame hase to be supported with 50x50x5 angle on the both sides and sides to be supported with 20mm pipe with nut bolting system Chain - 8mm thick M.S. Nikil coated high tensile chain with 's' hook. Ideal for the age group 4-14 yrs. 2 Each 17400
2 Slide Height 1.2m, width of the slide 0.5. Length of slide 2.4 m Mian frame-40mmx 2.5mm (thickness) @ NB. Pipe form if steel frame with support of 25x25x3 angle Ralling of 20x2 mm(thickness) pipe. Frp should b 8' length and 0.5 mtr Stairs made up of square pipe of 100x50mm.& 25x25x3 angl main frame, stairs & frp should properly fixed with support of flat 40x5 with each other withj nut bolting system. Ideal for the age group 4-14 yrs. Painting :- Structure have to be powder coated by best quality polyurethane Paints. Benches should be provide with hole passes for proper grip, fixing with 1:2:4 2 Each 21200
3 MGR Supplying & fixing of MS marie Go Round as per direction code(RC 506 MGR 2 Each 32000
4 See Saw Four Seater Height 0.4 m width 1.5 m length 3.0m vertical support - 90mm <2mm (thickness) NB. Pipe Center pipe - 2 nos. 90 mm x 2mm (thickness). Base - 25 mm x 2mm (thickness) pipe with support of lo mm plate. Handle - 25mm x 2mm (thickness) pipe on both side. HP. CASTING SYSTEM WITH bush & bearing, seat capacity 4 nos. F.R.P. laminated steel sheet gped with the pipe. ideal for the age group 4- 14 yrs. Painting:- Structure have to be powder coated by best quality polyurethane Paints. Benches should be provide with hole passes tor proper grip. fixing with 1:2:4 cement concrete 2 Each 12000
5 Rainbow Climber area 0.6x4.14x1.90 main frame 32mmx3mm pipe properly rounded in 180 degree . Painting powder coated but best quality polyurethane paints 1 Each 10200
6 Making Art and colouring, Painting in 2D format etc. complete on Retaining wall of existing area in ABD (Wall Drawing/Art as per drawing approved and directed by Engineer-in-Charge).
Tree wall 382.5
7 Cycle Size 110x51x130 red dark green or yellow colour
Hip twister and stepper size 1 No.s 42000
Back shaper (size 122x80x82) 1 No.s 46000
Waist Shaper Size 118x75x132.5 1 No.s 42000
Double Seated Puller (shoulder press) 1 No.s 43000
MUNICIPAL CORPORATION RAIPUR
Name of Work :- 15 वें वित्त आयोग अंतर्गत वर्ष 2022-23 हेतु प्राप्त राशि से स्वामी आत्मानंद सरोवर कर्बला तालाब में उद्यान विकास कार्य। (शेष कार्य )
AS PER SCHEDULE OF RATES -2015 (C.G. P.W.D.)
S.N. PARTICULARS Qty. UNIT RATE
Providing and filling in plinth with sand/ Crusher dust and hard moorum under floor in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc. complete.
Play Area 38.0204
CGPWD SOR RATE BASED
Excavation for all types and sizes of foundations, trenches and drains or for any other purpose including disposal of excavated stuff upto 1.5 m lift and lead upto 50m (at least 5m away from the excavated area), including dressing and leveling of pits.In all types of soils.
Pathway Sitting 29.25
Stepped Landscape 8.865
Surface dressing of the ground including removing vegetation and making up undulations and in-equalities not exceeding 15 cms in depth/ height including disposal of rubbish upto 1.5 m lift and lead upto 50m (at least 5m away from the dressed area).
Pathway Sitting 97.5
Stepped Landscape 29.55
Lanndscape 1500
Carriage by mechanical transport upto 5 km lead: 439.3035 cum 111
Extra for mechanical transport for every one km or part thereof beyond first 5 km lead. 439.3035 cum 9
Providing and filling in plinth with sand/ Crusher dust and hard moorum under floor in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc. complete.
Pathway Sitting 9.75
Stepped Landscape 2.955
Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work.
1:3:6 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size).
Pathway Sitting 9.75
Stepped Landscape 2.955
Tree Sitting 1.05
Providing and fixing form work including centring, shuttering, strutting,staging, propping bracing etc. complete and including its removal at all levels, for:
Pathway Sitting 4.05 Sqm 235
Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work.
1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size).
Slab (Pathway sitting area) 2.025 Cum 4163
Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire in foundation and plinth all complete:
Thermo-Mechanically treated bars FE 550D
Slab (sitting area) 203 kg 54.5
Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in: Cement Mortar 1:6 (1 cement : 6 coarse sand)
Pathway Sitting 5.67
Stepped Landscape 35.46
15 mm thick Table rubbed polished Granite stone slab in risers and treads of steps skirting dado and pillars laid on 12mm (Average) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry including rubbing and polishing etc. complete (single stone is to be used for risers and treads of steps and width of stone for skirting and dado shall be equal to the height of skirting & dado and length of 1.0 m). Granite stone black
Pathway Sitting 13.5
Tree Sitting 10.5
Extra for providing edge moulding to 15mm thick stone counters, vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.
Tree Sitting 17.5
Providing filling and compacting local earth (from approved source pit) in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc. complete.
Planters 660 Cum 242
Providing and planting following herbs in garden including preparation of soil, base plantation, providing and spreading different fertilizers, soil and sand
Hedges like Alife, Dorenta, Tikoma etc 205 each 14
Furn like Arica, China etc (3 year old) 125 each 125
Hibiscus (Flower)/ Rose 130 each 26.5
Carpet grass (well developed) 918
7 metre high, dia 130mm at bottom and 90mm at top, base plate size 220x220x12mm, foundation bolts 700mm long 15
Supply and fixing following street light pole bracket on existing pole made out of 50 mm dia MS "B" class pipe welded to 300 mm long MS pole canopy of suitable dia at a angle of 102.50 including having MS triangular stiffner of size 150 X 50 X 5 mm thick, making arrangement for tightening the bracket with pole by providing suitable size heavy duty nuts and bolts in canopy, painting with one coat of approved steel primer etc. as per specification.-Double Over Hang 0.75 metre Long( CG-PWD-Electrical Works-2020 - 19.9.5)
Erection of GI octogonal/ tubular/conical pole on existing cement concrete foundation having grouted bolts and nuts, aligning in true vertical position as per specification. -4 metre high ( CG-PWD-Electrical Works-2020 - 19.11.2)
Designing and providing suitable RCC foundation in Cement Concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) for 3 mere to 12 metre high GI octagonal pole including steel reinforcement form work, embeding 2 nos 50mm dia PVC pipe for cable entry in each foundation, excavation disposal of surplus soil and curing etc. as per specification. ( CG-PWD-Electrical Works-2020 - 19.12)
Painting of following height steel tubular poles with two coat of approved colour and shade synthetic enamel paint including cleaning the surface as per specification:-Above 6 metre and upto 8 metre( CG-PWD-Electrical Works-2020 - 19.24)
Above 6 metre and upto 8 metre 15
Supplying and fixing SP MCB, 240 volts, 'C' curve, suitable for inductive load in the existing MCB DB complete with connections, testing and commissioning etc. as per specification. -6 amps to 32 amps ( CG-PWD-Electrical Works-2020 -9.11.2)
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, multi strand wire in the existing surface/ concealed, FRLS PVC conduit / PVC casing caping as per specification and IS: 694 (2010)-3 x 1.5 sq. mm( CG-PWD-Electrical Works-2020 -3.11.3)
3x1.5 sq. mm 175
Supplying and laying HDPE pipe of 4kg/Sqcm in ground below road, path etc at a depth not less than 40 cm and upto 90 cm including excavation, dismantling of road if required and refilling the trench with excavated material, ramming and making the surface good etc. as per specification.-63 mm outer dia. ( CG-PWD-Electrical Works-2020 -14.2.1)
Supplying and laying following sizes one number FRLS PVC insulated /XLPE, PVC sheathed, steel armoured, aluminium conductor power cable of 1.1 KV grade in existing RCC/ HUME/ STONEWARE/ METAL/ HDPE pipe as per specification, IS: 1554 (1988, Part 1) / IS: 7098 (1988, Part 1).-4 x 16 sq. mm. ( CG-PWD-Electrical Works-2020 -15.3.23)
Supplying, installation, testing and commissioning of following 230/250 volts LED street light fitting with all accessories like driver, heat sink made of die cast aluminium with IP 66 protection and 15 KV surge protection on pole bracket, including connection, earthing, Separate housing for driver etc complete as per specification and P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 120 lumens /watt. ( CG-PWD-Electrical Works-2020 -6.28)
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as per specification and IS Code 3043: 1987(R 2016) ( CG-PWD-Electrical Works-2020 -12.1)
Supplying , installation , testing and commissioning for the following LED RGB / RGBW Linear wall washer luminaire for façade lighting with aluminium extruded housing of following wattage . Luminaire shall be capable of producing dynamic color changing light with 16 million colors by DMX / Ethernet based control . The beam angle of the fitting shall be narrow , medium , wide or asymmetric as per the requirement. Luminaire shall be complete with driver and capable of operating at line voltage without any seperate power supply from 100 to 270 V AC , 50 Hz , power factor >0.9 . Fixture shall be suitable to operate at ambient temperature range of -10 Degree C to +50 Degree C and shall be IP 65 and IK 06 rated . Lifetime should be at atleast L70:50000 burning hours at 50 Degree C . Luminaire shall be conforming to BIS and shall be complete with all necessary accessories required for proper working of fixture including weather proof connection cables , water proof connectors etc as required.
35-40 watt 2 Each 36966
Supplying, installation, testing and commissioning of Pulse with Module based water Proof controller for controlling RGB flood Light / Wall washer with remote control IP 65 as per the speciifcation. 5 Each 11463
Supplying, installation, testing and commissioning for the following LED RGB / RGBW flood lighting luminaire for façade lighting with Die-cast aluminium housing , power-coated finish of following wattage . Luminare shall be capable by DMX / Ethernet based control . The beam angle of the fitting shall be narrow , medium , wide , or asymmetric as per the requirement . Luminaire shall be complete with driver and capable of operating at line voltage without ant saperate power supply from 100-270 V AC , 50 HZ with power factor > 0.9 . Fixture shall be suitable to operate at an ambient temperature range of 10˚C to +50˚Cand shall be IP rated . Lifetime shall be atleast L70:50000 burning hours at 50˚C. Luminare shall be conforming to BIS (IS 10322) and shall be complete with all necessary accessories required for proper working of fixture including weather proof connection cables , water proof connectors etc as required.
55-60 watt 0 Each 41060
Supplying, installation, testing and commissioning of following LED Spike Light fitting complete with Electronic Driver Heat sink Capacitor and all other accessories, including connection, earthing etc complete as per specification and P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 100 lumens /watt. IP-65
9 watt 120 Each 1591
Supplying, installation, testing and commissioning of following LED Strip Light fitting complete with Electronic Driver Heat sink Capacitor and all other accessories, including connection, earthing etc complete as per specification and P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 100 lumens /watt. IP-65
7 Watt per Metre RGB Coloured 120 mt 454
Supplying, installation, testing and commissioning of following LED Rope light complete as per specification and IP65, P.F. should be greater than 0.75
9 Watt per Metre RGB 50 mt 355
Supplying and laying following sizes one number FRLS PVC insulated /XLPE, PVC sheathed, steel armoured, aluminium conductor power cable of 1.1 KV grade in existing RCC/ HUME/ STONEWARE/ METAL/ HDPE pipe as per specification, IS: 1554 (1988, Part 1) / IS: 7098 (1988, Part 1).
Labour charges for assembling, centering and lowering of properly designed casing pipe assembly inside the bore hole drilled for construction of Gravel Packed tube well including the cost of providing and fixing of centraliser, and transportation of casing assembly etc. complete .
Casing assembly composed of 150 m.m. diameter blank and slotted G.I. Casing pipes.
Conducting the yield test of tubewell by operating the pumping set continuously for a desired time period and measuring the discharge and drawdown of tubewell at a suitable time interval as per the direction of Engineer in Charge including cost of energy, cost of installation of suitable measuring device and hire charges of pumping set etc.complete.
Submersible pumping set up to 1 to 3 H.P. 2 Per Hour 642
Supplying, installation, testing and commissioning of submersible pump set for water supply system with submersible motor directly coupled to multi-stage submersible pump of specified discharge capacity, head, delivery size in existing bore well including 2 sets of suitable size holding clamps made out of 50 mm X 6 mm MS flat, connection with suitable submersible cable of standard length etc. as per specification and IS: 694 (2010).Note: submersible Cable should be rust proof, safe from oil / Grease and under water Chemical / abrasion Resistant.
3.0 HP, three phase 1 No. 22714
Supplying and fixing following dia HDPE pipe PE-80 Grade (8kg/sqcm) in single length in the suction/ delivery line of water supply pump etc. as per specification.
32 mm outer dia 300 RM 55
Supply, installation, testing and commissioning of 1-3 HP 1 phase submersible motor starter cum control wall/floor mounted type made out of not less than 1.6 mm thick MS sheet and comprising of following panel mounting switchgears there in including connection interconnection etc. as per specification. a) Phase indicating lamps with fuses and toggle switches 1 set b) 1/2/3 HP 1 phase DOL starter with over load and no volt relay 1 No c) 25 A "C" curve DPMCB 1 No d) Voltmeter 0-250 V 1 set e) Ammeter 0-10 A 1 set
Supplying, laying and fixing following size submersible cable along with GI/PVC/HDFC pipe line or laid in ground etc as per specification and IS: 694 (2010).
3x4.0 sqmm 125 RM 90
3x6.0 sqmm 175 RM 135
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This included jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. EXTERNAL WORK
25 mm nominal outer dia pipes 283 mt 165
50 mm nominal outer dia pipes 50 mt 476
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 1.09 MB
3956285513111942751_189798_Form B.pdf
NIT • 0.62 MB
4708823860463863298_189798_Affidavit format.pdf
NIT • 0.06 MB
8026588946554227233_189798_Form A.pdf
NIT • 0.19 MB
6008460954242314185_192633_Nit Details.docx
NIT • 0.04 MB
217818090018791797_189798_BOQ NON SOR.xlsx
BOQ • 0.01 MB
3644277340001983345_189798_BOQ SOR.xlsx
BOQ • 0.52 MB
Download all tender documents and submit your bid