CERTAIN REPAIR / REPLACEMENT OF EXTERNAL ELECTRIC LOW TENSION DISTIBUTION SYSTEM AND INTERNAL WIRING, FITTINGS AND FIXTURES AT KHUNDRU UNDER GE 861 EWS

Amount

Excavation in trenches not exceeding 1.5 m wide and n.exc. 1.5 m deep for foundation of poles/stay/cable etc including getting out in any type of soil complete all as specified and directed by Engr-in-Charge.

Excavation in trenches beyond 1.5 m wide and n.exc. 3 m deep for foundation of poles/stay etc including getting out in any type of soil complete all as specified and directed by Engr-in-Charge.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in depth.

Removing excavated material n.exc. 50m and depositing where directed at a level n.exc. 1.5 m above the starting point.

M&L Sand cushioning to cable with dry fine sand in trenches 8 cm below the cable and 15 cm above the cable after laying complete all as specified. Note : Only punned thickness shall be measured.

M&L Bricks laid in trenches flat with width equal to length of brick for cable protection well burnt sub class 'B' laid across the cable complete all as specified.

M&L Plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified.

M&L Plain cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in coping including necessary formwork to poles etc complete all as specified.

S & F Pin type insulator porcelain, vitreous, white/ brown or green insulators including one galvanized MS spindle, two galvanized iron washer, GI nut of size 100 mm height and 65mm dia 1100 volts grade incl dismantling of old unsv complete all as specified .

S & F Shackle type insulators, porcelain, vitreous white/ brown or green including galvanised MS strips, bolt, nuts and washer of size 75mm height and 90mm dia, size of strap section 31x3mm and dia of 12 mm for working pressure 1100 volts grade incl dismantling of old unsv complete all as specified

M&L earth wire/guard cradle hexagonal/rectangular fabricated with 4mm dia galvanized mild steel, binding wire including dismantling of old unsv complete all as specified and directed by Engr-in- Charge.

M&L Aluminium conductors, reinforced (ACSR) conductor of any size for OH lines including stretching, binding wire ,jumpers, line taps etc including dismantling of old unsv complete all as specified.

Supply and fixing steel tubular swaged pole with cast iron base plate finial tapper plug, bolts nuts and screws and specified type 410-SP-31 ( 9 Mtr long) in truly vertical position 1.5 m length of pole above ground level shall be painted with two coats of synthetic enamel paint in strips of 30 cm width, black and yellow alternatively and painting with two coats of aluminum paint over a coat of red oxide primer on rest part of pole and its connected parts complete all as specified laying GI pipe light grade for cable protection and fixing to existing pole with flat iron clamp 25x3mm including nuts bolts and washers etc complete of 40mm dia including taking out old unserviceable pole complete all as directed by Engr-in-Charge

Supply & fixing in replacement of Stay assembly complete with accessories as shown in electric plate No. 1 and including loop type insulator white brown or green with over all dimensions 65x90mm, clearance of hole 16mm complete all as specified.

M & L for Cross arms, bracings, supports, clamps and back plate fabricated from structural steel section including nuts, bolts, washers, welding bending cold or hot, drilling holes for bolts in any shapes size as indicated or directed and inclusive of one primer coat, and one under coat and one finished coat of aluminium paint incl dismantling of old unsv complete all as specified.

S & F in repair heavy duty PVC flat two core cable weather proof with aluminium solid conductor,1100 Volts grade 16 Sqmm 2 core for service wire pole or passing through pipe including all accessory etc complete all as specified.

S & F in repair heavy duty PVC flat two core cable weather proof with aluminium solid conductor,1100 Volts grade 10 Sqmm 2 core for service wire pole or passing through pipe including all accessory etc complete all as specified.

S & F in repair heavy duty PVC flat two core cable weather proof with aluminium solid conductor,1100 Volts grade 06 Sqmm 2 core for service wire pole or passing through pipe including all accessory etc complete.

Supply & fixing in repair MCCB 4 pole, 415 volts adjustable type, 160 Amps with breaking capacity 35/36 KA complete all as specified.

Supply & fixing in repair MCCB 4 pole, 415 volts adjustable type, 100 Amps with breaking capacity 25 KA complete all as specified.

Supply & fixing in repair MCCB 4 pole, 415 volts adjustable type, 125 Amps with breaking capacity 25 KA complete all as specified.

Supply & fixing in repair MCCB 4 pole, 415 volts adjustable type, 160 Amps with breaking capacity 25 KA complete all as specified.

Supply & fixing in repair MCCB 4 pole, 415 volts adjustable type, 63 Amps with breaking capacity 16 KA complete all as specified.

Supply & fixing in repair MCCB 4 pole, 415 volts adjustable type, 100 Amps with breaking capacity 16 KA complete all as specified.

Supply & fixing in repair MCCB 3 pole, 415 volts adjustable type, 63 Amps with breaking capacity 16KA complete all as specified.

Supply & fixing in repair MCCB 3 pole, 415 volts adjustable type, 100 Amps with breaking capacity 25KA complete all as specified.

Supply & fixing in repair MCCB 3 pole, 415 volts adjustable type, 160 Amps with breaking capacity 35KA complete all as specified.

Supply & fixing in repair MCCB 3 pole, 415 volts adjustable type, 200 Amps with breaking capacity 50KA complete all as specified.

Supply & fixing in repair MCCB 3 pole, 415 volts adjustable type, 315 Amps with breaking capacity 50KA complete all as specified.

M&L in repair anti climbing device spike type fabricated out of MS bars round, square and flat in shape including nuts , bolts and washers and welding in two halves made to shape to suit the cross section of the pole all as specified and directed by Engr-In-Charge

Supply and replacement in repair of danger notice board 1.6mm thick M.S sheet, vitreous enameled white with letters, figures and conventional skull and bone in signal red colour and fixed with M.S clamps, bolts and nuts of approved size for LT 30x15cm size. by replacing the unserviceable one.

Supply and replacement of danger notice board 1.6mm thick M.S sheet, vitreous enameled white with letters, figures and conventional skull and bone in signal red colour and fixed with M.S clamps, bolts and nuts of approved size for LT 25x20cm size by replacing the unserviceable one.

S&F in repair 1100 volt grade heavy duty XLPE cable with PVC insulated aluminium conductor served with inner sheathing of PVC tape armoured with galvanized steel strip or wire and overall PVC sheathed of size 35 Sqmm nominal cross section 3.5 core laid in trenches, fixed to pole or passing through pipes including all necessary clamps, nuts, bolts washers complete all as specified and directed. Note- Earth work and protection work shall be measured and paid for separately under respective items of BOQ.

Description all as per item No. 33 above but cross sectional area 25 Sqmm 4 core complete all as specified and directed.

Description all as per item No. 33 above but cross sectional area 70 Sqmm 3.5 core complete all as specified and directed.

Description all as per item No. 33 above but cross sectional area 95 Sqmm 3.5 core complete all as specified and directed.

Description all as per item No. 33 above but cross sectional area 120 Sqmm 3.5 core complete all as specified and directed.

Supply & fixing in replacement of cable end heat shrink type jointing kit 1100 Volts for indoor/outdoor termination with jointing material and accessories suitable for 10 Sqmm to 16 Sqmm 2 core XLPE/PVC armoured aluminium conductor cable complete all as specified and directed by EIC.

Supply & fixing in replacement of cable end heat shrink type jointing kit 1100 Volts for indoor/outdoor termination with jointing material and accessories suitable for 16 Sqmm to 25 Sqmm 3.5/4 core XLPE/PVC armoured aluminium conductor cable complete all as specified and directed by EIC.

Supply & fixing in replacement of cable end heat shrink type jointing kit 1100 Volts for indoor/outdoor termination with jointing material and accessories suitable for 35 Sqmm to 50 Sqmm 3.5/4.0 core XLPE/PVC armoured aluminium conductor cable complete all as specified and directed by EIC.

Supply & fixing in replacement of cable end heat shrink type jointing kit 1100 Volts for indoor/outdoor termination with jointing material and accessories suitable for 70 Sqmm to 95 Sqmm 3.5/4 core XLPE/PVC armoured aluminium conductor cable complete all as specified and directed by EIC.

Supply & fixing in replacement of cable end heat shrink type jointing kit 1100 Volts for indoor/outdoor termination with jointing material and accessories suitable for 120 Sqmm to 185 Sqmm 3.5/4.0 core XLPE/PVC armoured aluminium conductor cable complete all as specified and directed by EIC.

Supply & fixing in replacement of cable end heat shrink type jointing kit 1100 Volts for indoor/outdoor termination with jointing material and accessories suitable for 225 Sqmm to 300 Sqmm 3.5/4.0 core XLPE/PVC armoured aluminium conductor cable complete all as specified and directed by EIC.

Supply & fixing in replacement of cable straight through heat shrink type jointing kit 1100 Volts for indoor/outdoor termination with jointing material and accessories suitable for 10 Sqmm to 16 Sqmm 2 core XLPE/PVC armoured aluminium conductor cable complete all as specified and directed by EIC.

Supply & fixing in replacement of cable straight through heat shrink type jointing kit 1100 Volts for indoor/outdoor termination with jointing material and accessories suitable for 16 Sqmm to 95 Sqmm 3.5/4 core XLPE/PVC armoured aluminium conductor cable complete all as specified and directed by EIC.

Supply & fixing in replacement of cable straight through heat shrink type jointing kit 1100 Volts for indoor/outdoor termination with jointing material and accessories suitable for 120 Sqmm to 300 Sqmm 3.5/4.0 core XLPE/PVC armoured aluminium conductor cable complete all as specified and directed by EIC.

S&F in repair cable route indicator made out of 50x6 mm angle iron 60 mm long embedded in PCC block of suitable size with moulded letter HT cable or LT cable suitable inscribed on cast iron circular plate 8 mm thick 100 mm dia complete including PCC 1:3:6 type C-2(using 40 mm graded aggregate block of 150x150x150 mm size ) all as specified and directed by Engineer - in - Charge

Supply and laying in repair GI tubing light grade 25mm dia with all fitting laid in trenches or fixed on wall along pole complete for protection of electric cable/strip complete all as specified by Engineer-in-Charge.

Supply & fixing in replacement of junction box of size 250x200x150 mm made of MS Sheet 1.6mm thick, front door openable with fixing screw painting with two coats of synthetic enamel powder coated paint over a coat of red oxide including alumn bus bar 4 Nos of size 25x3mm mounted on epoxy based post insulators and drilled holes for connection including 01 Nos MCB SPN 20 Amps , 1 Nos MCBs 06 amps incl magnetic lock system all as required and fixed to poles using MS strip of size 32x6mm and nuts & bolts of required size all as required at site or directed by Engr-in-charge.

Earthing complete with galvanised steel earth plate electrode 60 cm x 60cmx6mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 meters below normal ground level. connecting to the GI wire 4 mm dia by means of bolls, nuts, check nuts and washers of galvanised iron and earth wire protected by provision of GI light grade pipe 15mm bore including provision of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone aggregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM weight not less than 4 Kg/Sqm) and frame of angle iron 25x25x6mm with lugs 02 Nos and handle of 6mm dia MS bar made to shape, GI medium grade 20mm bore pipe for watering , perforated at bottom. 1.75 metre long placed on top edge of earth plate. charcoal and common salt filling with fixing arrangement, funnel wire mesh and earth work in soft soil returning filling in and removal of surplus soil to a distance not exceeding 50 meters all as per electrical plate 3 of SSR-2009 Part-I and connecting to earth test point all as specified or indicated including testing on completion. NOTE :- (i) Item of earthing includes cost of 7.5 m long GI wire of size 4 mm dia with protection pipe of 15mm dia GI medium grade, any variation in length shall be adjusted through deviation order based on SSR rates enhanced by 25%. (ii) On testing after completion of earthing if the desired earth resistance is not obtained earthing will be re-done by the contractor at his own risk and cost.

Material & labour for earthing complete with galvanised cast iron earth plate electrode of size 600x600x6 mm thick buried directly in ground less than 3.0m deep below normal ground level as earth electrode with top edge of the earth plate not less than 2.25mtr below ground level using GI strip 32x6mm as earth continuity conductor connected to earth plate by means of welding, GI thimbles, nuts, bolts & washers all as directed including providing earth wire protection pipe GI light grade 40mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and RCC pit cover with handle of angle iron frame of size 40 x 40 x 6mm in PCC 1:3:6 adequate quantity of charcoal dust and salt and kalmi shore all around the earth plate, earth work in any type of soil remaining surplus excavated material all as required at site and specified in EP No 3 of SSR part I 2009 or directed by Engineer-in-charge and incl testing on completion. NOTE :- (i) Item of earthing includes cost of 7.5 m long GI strip of size 32x6mm with protection pipe of 40mm dia GI medium grade, any variation in length shall be adjusted through deviation order based on SSR rates enhanced by 25%. (ii) On testing after completion of earthing if the desired earth resistance is not obtained earthing will be re-done by the contractor at his own risk and cost.

Taking down carefully aluminum/copper point wiring (light fan socket or power) complete with fitting such as switches, tube lights, ceiling rose, pendants, regulators, MCB DB, MCB'S, Main switch from control board and making good disturbed surfaces of walls, floor to match with existing specification complete and all as specified keeping aside regulators/ light fitting/ MCBs serviceable/ unserviceable items for reuse with in the same bldg or deposited to MES store yard

M&L Point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC FRLS insulated unsheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC insulated unsheathed copper conductor single core cable (green color) as earth lead in and including PVC casing and capping/Conduit medium grade of suitable size run on wall/surface with all fittings (ISI Marked) controlled by one switch including CI/MS sunk box of required size or PVC Gang Box all as directed by Engr in Charge & 3mm thick plastic laminated sheet, including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified.

All as per srl item No-57 here in above but for one 3 pin 5A socket outlet independent controlled by one switch.

All as per srl item No-57 here in above but for one 5A socket outlet on the same board controlled by one switch.

All as per srl item No-57 here in above but for one 3 pin 15 Amps socket outlet independent with 2.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable and 2.5 Sqmm PVC FRLS insulated unsheathed copper conductor single core cable (green color) as earth lead.

M&L concealed Point wiring complete with 1.5 sqmm 1100 graded PVC FRLS (Multistrand) insulated unsheathed copper conductor, PVC conduit not less than 20mm dia concealed, including cutting chases, finishing of slote by means of cement mortar making good to existing surface of the wall and touching with three coats of existing colour of wall and making good disturbed surface complete sunk in pressed steel terminal boxes of required size not less than 1.6mm thick factory made and factory painted with top cover 3mm thick plastic laminated sheet fixed with brass screw and washers with all accessories including single core multistranded copper conductor 1.5Sqmm size cable as earth continuity wire connected to common earth dolly to sunk boxes of /CI/MS terminal boxes / each fitting / fixtures for housing switches, sockets etc for one light / fan/ bell point controlled by one switch one way complete all as specified.

All as per srl item No-61 here in above but for one 3 pin 5A socket outlet independent controlled by one switch.

All as per srl item No-61 here in above but for one 5A socket outlet on the same board controlled by one switch.

All as per srl item No-61 here in above but for one 3 pin 15 Amps socket outlet independent with 2.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable and 2.5 Sqmm PVC FRLS insulated unsheathed copper conductor single core cable (green color) as earth lead.

M&L for sub main wiring with two single core PVC insulated flexible copper conductor cable of size 4 sqmm and one single core PVC insulated flexible copper conductor cable green colour of size 2.5 Sqmm as earth lead in & including PVC casing capping medium grade 2mm thickness ISI marked incl taking down old unsv complete all as required at site or directed by Engr-in- charge.

M&L for sub main wiring with two single core PVC insulated flexible copper conductor cable of size 6 sqmm and one single core PVC insulated flexible copper conductor cable green colour of size 4 Sqmm as earth lead in & including PVC casing capping medium grade 2mm thickness ISI marked incl taking down old unsv complete all as required at site or directed by Engr-in- charge.

M&L for sub main wiring with two single core PVC insulated flexible copper conductor cable of size 10 sqmm and one single core PVC insulated flexible copper conductor cable green colour of size 6 Sqmm as earth lead in & including PVC casing capping medium grade 2mm thickness ISI marked incl taking down old unsv complete all as required at site or directed by Engr-in- charge.

M&L for sub main wiring with two single core PVC insulated flexible copper conductor cable of size 4 sqmm and one single core PVC insulated flexible copper conductor cable green colour of size 2.5 Sqmm as earth lead in & including PVC conduit medium grade ISI marked incl taking down old unsv complete all as required at site or directed by Engr-in- charge.

M&L for sub main wiring with two single core PVC insulated flexible copper conductor cable of size 6 sqmm and one single core PVC insulated flexible copper conductor cable green colour of size 4 Sqmm as earth lead in & including concealed PVC conduit medium grade ISI marked cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification incl taking down old unsv complete all as required at site or directed by Engr-in- charge.

M&L for sub main wiring with two single core PVC insulated flexible copper conductor cable of size 10 sqmm and one single core PVC insulated flexible copper conductor cable green colour of size 6 Sqmm as earth lead in & including concealed PVC conduit medium grade ISI marked cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification incl taking down old unsv complete all as required at site or directed by Engr-in- charge.

M&L for sub main wiring with two single core PVC insulated flexible copper conductor cable of size 4 sqmm and one single core PVC insulated flexible copper conductor cable green colour of size 2.5 Sqmm as earth lead laid in existing PVC conduit including taking down old unsv cable complete all as required at site or directed by Engr-in- charge.

M&L for sub main wiring with two single core PVC insulated flexible copper conductor cable of size 6 sqmm and one single core PVC insulated flexible copper conductor cable green colour of size 4 Sqmm as earth lead laid in existing PVC conduit including taking down old unsv cable complete all as required at site or directed by Engr-in- charge.

M&L for sub main wiring with two single core PVC insulated flexible copper conductor cable of size 10sqmm and one single core PVC insulated flexible copper conductor cable green colour of size 6 Sqmm as earth lead laid in existing PVC conduit including taking down old unsv cable complete all as required at site or directed by Engr-in- charge.

M&L for Switch piano flush button single pole one way 5 amps 240 volts

M&L for Switch Socket combination, 6 pin 5 and 15 amps multi purpose 2 in 01 flush type, 230 volts.

M&L for Switch Socket combination 2 in 1, 5 Amps flush type, 230 volts .

M&L for Socket outlet 2 in 1, 3 pin, 6 Amps flush type 50 Hz all as specified and directed.

Ceiling rose surface bakelite 2 to 3 terminals.

Supply and fixing in replacement fan regulator electronic, step type hum free suitable to control speed of fan from 0 to 100% and connecting electrically all as required at site or directed by engineer-in-charge.

S & F Lamp holder insulated body with back plate for batten fittings.

S&F in repair lamp holder insulated body with back plate for batten fittings all as specified and directed by Engr-In-charge.

Supply & fixing bell push flush type 6 Amps 240 Volt

Supply & fixing in repair call bell , ding dong AC single phase, 230 volts 50 Hz including wooden/PVC board of suitable size, connecting and testing.

Supply & fixing in repair Plug top 3 pin 15 amps 230 volts.

Supply & fixing in repair Plug top 3 pin 5 amps 230 volts.

Supply & fixing in repair PVC Gang box surface type suitable for fixing of 5 pin 15 Amp multipurpose switch socket on wall complete all as specified

Supply & fixing in repair PVC Gang box surface type suitable for fixing of 5 pin 5 Amp multipurpose switch socket on wall complete all as specified

S&F in repair earth continuity conductor and main earthing lead fixed to wall on batten or recess or chases or buried in the ground or drawn in conduit /pipe or fixed to pole having size 4 mm dia GI wire all as specified and directed by Engr-in- Charge.

Supply & fixing in replacement of Rigid non-metallic grade PVC conduit of size 32 mm dia, exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc .

Supply and fixing of LED 7 watt pin type bulb complete all as specified and directed by Engr-in-Charge.

S&F decorative ultra slim linear LED in replacement of 20 Watt , 4 ' long lighting fixture with extruded Al heat sink , environment friendly , energy efficient ready to use pack incl LED tube complete with inbuilt electronic driver , PCB , connector block etc including connecting up with three core twisted flexible copper conductor cable with suitable size LED tube all as specified and directed by EIC. Make : Havells Cat Part No LHDD02102674 or Equivalnet/C&S/Bajaj.

Supply & fixing in replacement of street light bracket made of GI pipe medium grade 40 mm dia 1.2 long suitable bends shape with and including fixing clamps suitable size 2 nos with steel tubular pole with suitable size nuts,bolts and washers all as specified and directed by Engr-in-charge

Supply & fixing in replacement of sheet metal enclosure MCB distribution board, single pole and neutral double door with IP-43 protection single phase 240 volts 4 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification.

Supply & fixing in replacement of MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated copper busbar with neutral link, 8 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed.

Supply & fixing in replacement of for MCB single pole 240 volts 6 to 32 amps as per site requirement , with rupturing capacity 10 KA as per IS-8828-1996 (IEC-60898), biconnect upper and lower terminals , integrated label holder to ensure circuit identification.

Supply & fixing in replacement of Isolator single pole neutral (SPN) 32 Amps to 40 Amps 240 Volts with rupturing capacity 10 KA,as specified and directed by Engr-in-charge.

Supply & fixing in replacement of decorative box type mirror light LED 8W fixture with in built electronic driver complete with all accessories prewired and connecting electrically to ceiling rose using PVC FRLS insulated and overall sheathed cable Make-Havells Cat Part No LUMILINEBS9WLED830SPCWH or equivalent in /Philips/Surya

Supply & fixing in replacement of MCCB distribution board TPN, 12 way vertical double door sheet steel enclosure powder coated with and including 100 Amp rated Bus bar,100Amp 25kA 415 Volt MCCB,DP and SP MCBs 6-32 Amp prewired wired all as specified and directed by Engr-in-Charge.

Supply & fixing in replacement of for MCB single pole and neutral 240 volts 32 to 40 amps as per site requirement , with rupturing capacity 10 KA as per IS-8828-1996 (IEC-60898), biconnect upper and lower terminals , integrated label holder to ensure circuit identification.

Supply & fixing in replacement of MCB TPN 415 volts, 40-63 amps 'C' Curve 10 kA Capacity all as directed.

Taking down old and unsv ceiling fan, exhaust fan , wall mounted fan from the site cleaning entire fan free from dust oily and greasy surface and oiling and greasing of the and fixing it own location with and including of the minor spares such as piece of wire nuts bolts and washer etc. all as specified and directed by Engr-in-charge.

M&L for strip opening of unsv ceiling fan1200 mm sweep rewinding with super enameled copper winding wire of existing gauge and existing nos of turn with and including insulation material complete all as specified and directed by Engr-In-Charge

M&L for strip opening of unsv ceiling fan1400 mm sweep rewinding with super enameled copper winding wire of existing gauge and existing nos of turn with and including insulation material complete all as specified and directed by Engr-In-Charge

M&L for strip opening of unsv Exhaust fan 230 mm sweep rewinding with super enameled copper winding wire of existing gauge and existing nos of turn with and including insulation material complete all as specified and directed by Engr-In-Charge

M&L for strip opening of unsv Exhaust fan 300 mm sweep rewinding with super enameled copper winding wire of existing gauge and existing nos of turn with and including insulation material complete all as specified and directed by Engr-In-Charge

M&L for strip opening of unsv Exhaust fan 380 mm sweep rewinding with super enameled copper winding wire of existing gauge and existing nos of turn with and including insulation material complete all as specified and directed by Engr-In-Charge

M&L for strip opening of unsv Exhaust fan 450 mm sweep rewinding with super enameled copper winding wire of existing gauge and existing nos of turn with and including insulation material complete all as specified and directed by Engr-In-Charge

M&L for strip opening of unsv wall mounted fan 450mm sweep rewinding with super enameled copper winding wire of existing gauge and existing nos of turn with and including insulation material complete all as specified and directed by Engr-In-Charge

M&L for strip opening of unsv Pedestal fan 450mm sweep rewinding with super enameled copper winding wire of existing gauge and existing nos of turn with and including insulation material complete all as specified and directed by Engr-In-Charge

M&L painting of the ceiling fan of 1200/1400 mm sweep by using of spray gun in site with and including super enameled synthetic paint exiting tint and colour coding all as specified and directed by Engr-In-Charge

M&L painting of the Exhaust fan of 230/300/380/450 mm sweep by using of spray gun in site with and including super enameled synthetic paint exiting tint and colour coding all as specified and directed by Engr-In-Charge

S&F in replacement of capacitor 2.5 mfd AC 230 volts 50 Hz complete all as specified and directed by Engineer-in-Charge.

S&F in replacement of capacitor 3.15 mfd AC 230 volts 50 Hz complete all as specified and directed by Engineer-in-Charge.

M&L in repair of ball bearing suitable for ceiling fan, exhaust fan, wall mounted fan and pedestal fan any size and any make all as specified and directed by Engr-In-Change.

M&L in repair of gun metal bush suitable for ceiling fan, exhaust fan, wall mounted fan and pedestal fan any size and any make all as specified and directed by Engr-In-Change.

S&F in repair complete hanging clamp in all respect nuts, bolts,washer,spilit pin and rubber real all as specified.

S&F in repair down rod 300 mm long heavy duty suitable for 1200/1400 mm sweep ceiling fan all as specified and directed

S&F in repair down rod 600 mm long heavy duty suitable for 1200/1400 mm sweep ceiling fan all as specified and directed

S&F in repair PVC heavy duty canopy suitable for 1200/1400mm ceiling fan any make all as specified and directed.

S&F in repair sweep fan blade made of alluminium alloy duly air dynamic angle suitable for 1200 mm sweep ceiling fan ISI make all as specified and directed

S&F in repair sweep fan blade made of alluminium alloy duly air dynamic angle suitable for 1400 mm sweep ceiling fan ISI make all as specified and directed

Taking down water storage heater of capacity 25/35/50 ltr from the site and opening base plate assy and removing all sludge and scaling from the inner tank and refixing the the base plate assy with and including minor spares such rubber gasket, piece of wire etc all as specified and directed.

S&F in repair heating element of 1500 watt 230 Volts, 50 HZ triangular in shape all as specified and directed.

S&F in repair heating element of 2000 watt 230 Volts, 50 HZ triangular in shape all as specified and directed.

S&F in repair heating element of 1500 watt 230 Volts, 50 HZ circular in shape all as specified and directed.

S&F in repair heating element of 2000 watt 230 Volts, 50 HZ circular in shape all as specified and directed.

S&F in repair thermostat switch 230 Volt 50 Hz adjustable range 0-90 degree Celsius complete all as specified.

S&F in repair indicator lamp round and square in shape suitable for 25/35/50 ltr storage type water heater as per sample 230 volt all as specified and directed.

S&F in repair flexible PVC connection pipe heavy duty suitable for hot water to bear the temperature 100 degree Celsius with out let and inlet connection brass adaptor and PVC washer having size 450 mm long 15 mm nominal dia complete all as specified and directed.

S&F in repair base plate assy complete suitable for 25 ltr storage type water heater with and including rubber seal all as specified and directed

S&F in repair base plate assy complete suitable for 35 ltr storage type water heater with and including rubber seal all as specified and directed.

S&F in repair base plate assy complete suitable for 50 ltr storage type water heater with and including rubber seal all as specified and directed.

S&F in repair inner tank assy made of copper suitable for 25 ltr storage type water heater with and including nuts, bolts and washer and fusible plug all as specified and directed.

S&F in repair inner tank assy made of copper suitable for 35 ltr storage type water heater with and including nuts, bolts and washer and fusible plug all as specified and directed.

S&F in repair inner tank assy made of copper suitable for 50 ltr storage type water heater with and including nuts, bolts and washer and fusible plug all as specified and directed.

S&F in repair glass wool for insulation purpose in any make and any capacity storage type water heater complete all as specified and directed.

S&F in repair outer body including upper and lower cover and inspection plate made of MS sheet duly painted with super enameled synthetic paint over a coat of steel primer suitable for 25 Ltr storage type water heater all as specified and directed.

S&F in repair outer body including upper and lower cover and inspection plate made of MS sheet duly painted with super enameled synthetic paint over a coat of steel primer suitable for 35 Ltr storage type water heater all as specified and directed.

S&F in repair outer body including upper and lower cover and inspection plate made of MS sheet duly painted with super enameled synthetic paint over a coat of steel primer suitable for 50 Ltr storage type water heater all as specified and directed.

S&F in repair three core cable 1100 volt grade having size 40/0.0076 copper conductor multi stranded complete all as specified and directed.

Taking down old/UNSV fluorescent security light/street lights and S&F LED 35 Watt security light Energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP66 protection and impact resistance of IK07 complete all as per directed by EIC. Make Havells Cat Part No LHETBXU7PAIS035 or equivalent/CROMPTON GREAVES/GE.

Taking down old/UNSV fluorescent security light/street lights and S&F LED 30 Watt security light Energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP66 protection and impact resistance of IK07 complete all as per directed by EIC. Make Havells Cat Part No LHETBXU7PAIS030 or equivalent/CROMPTON GREAVES/GE.

Taking down old/UNSV fluorescent security light/street lights and S&F LED 45 Watt security light Energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP66 protection and impact resistance of IK07 complete all as per directed by EIC. Make Havells Cat Part No LHETAXU7PN6J045 or equivalent/CROMPTON GREAVES/GE.

S&F in repair LED single phase driver suitable for 35 watt street light input voltage 230 volts 50 Hz all as specified and directed by Engr-in-charge.

S&F in repair LED single phase driver suitable for 40 watt street light input voltage 230 volts 50 Hz all as specified and directed by Engr-in-charge.

S&F in repair LED single phase driver suitable for 45 watt street light input voltage 230 volts 50 Hz all as specified and directed by Engr-in-charge.

S&F in repair LED single phase driver suitable for 50 watt street light input voltage 230 volts 50 Hz all as specified and directed by Engr-in-charge.

M/S AK ENTERPRISES

M/S BILAL AHMAD BHAT

M/S STARE BUILDERS

M/S Hilal Builders

M/S A Q ENTERPRISES

FG CONSTRUCTION

M/S Hilal Constructions

M/S HAMID AND CO