Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹46.8 LAdmitted-Finance | ₹46.8 L | L1 | Admitted-Finance |
| 2 | L2₹49.9 LAdmitted-Finance | ₹49.9 L | L2 | Admitted-Finance |
| 3 | L3₹50.4 LAdmitted-Finance | ₹50.4 L | L3 | Admitted-Finance |
| 4 | L4₹53.9 LAdmitted-Finance | ₹53.9 L | L4 | Admitted-Finance |
| Sl No | Description | Qty | Unit | Jamna Constructions L3 | sabir and brothers L1 | Vinayak Trading House L4 | JYOTI ENTERPRISES L2 |
|---|---|---|---|---|---|---|---|
| 1.00 | Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 sqm each complete all as specified and directed. | 24 | Each | 45 ₹1,080 | 50 ₹1,200 | 100 ₹2,400 | 50 ₹1,200 |
| 2.00 | Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 Sqm and not exc 4 Sqm each complete all as specified and directed. | 42 | Each | 45 ₹1,890 | 50 ₹2,100 | 100 ₹4,200 | 50 ₹2,100 |
| 3.00 | M & L for Resecuring or easing and adjusting door shutters of any size and any description without taking down shutter from frame complete all as specified and directed. | 4 | Each Leaf | 45 ₹180 | 70 ₹280 | 300 ₹1,200 | 50 ₹200 |
| 4.00 | Dismantling boarding of any discription fixed in any position with screws complete all as specified and directed. | 240 | Sqm | 20 ₹4,800 | 6 ₹1,440 | 5 ₹1,200 | 10 ₹2,400 |
| 5.00 | Demolition of stone, brick masonry built in cement mortar incl quoins, arches, etc but exceeding ashlar facing dressed stone Work etc. complete all as specified and directed. | 6 | Cum | 125 ₹750 | 60 ₹360 | 180 ₹1,080 | 100 ₹600 |
| 6.00 | M&L for Brick work with Fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in half brick wall bulit in cement mortar 1:6 complete all as specified and directed. | 43 | Cum | 5,850 ₹2.5 L | 4,500 ₹1.9 L | 5,425 ₹2.3 L | 5,000 ₹2.1 L |
| 7.00 | M&L for Fromwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed. | 4.5 | Sqm | 225 ₹1,012.50 | 270 ₹1,215 | 250 ₹1,125 | 250 ₹1,125 |
| 8.00 | M&L for Reinforced cement concrete type M 25 (design mix) (20mm graded aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves as complete all as specified and directed. | 0.4 | Cum | 4,750 ₹1,900 | 5,000 ₹2,000 | 6,000 ₹2,400 | 5,500 ₹2,200 |
| 9.00 | S&F Ball catches with 8mm dia steel ball and brass body and striking plates including letting in fixed complete all as specified and directed. | 8 | Each | 200 ₹1,600 | 100 ₹800 | 80 ₹640 | 150 ₹1,200 |
| 10.00 | S&F Solid single PVC door frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet used instead of Plain colour PVC sheet reinforced with M.S. tube, edges will be painted to match with prelam sheet suppling & fixing in opening as per specification & drawing including all fixtures shown on drawing complete all as specified and directed. | 30 | RM | 385 ₹11,550 | 400 ₹12,000 | 400 ₹12,000 | 600 ₹18,000 |
Updated dates
Tender Value
₹48.5 L
EMD Value
₹96,980
Closing Date
19 May 2026, 6:00 pmClosed
Garrison Engineer (MCTE)
GE (MCTE) Mhow (MP) 453441
SPECIAL REPAIR TO BUILDING NO SM-175 (INCL FOLLOWER ACCN) UNDER GE (MCTE) MHOW
2026_MES_761407_1
GE(MCTE)/MHOW/71(T) OF 2025-26
Open Tender
Civil Works
180 days
GE (MCTE) Mhow
As per Tender Document
10 documents required · 10 mandatory
₹500
GE (MCTE) Mhow
₹96,980
Yes
27 May 2026
22 Apr 2026
21 May 2026
22 Apr 2026
19 May 2026
6 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount | Item Code |
|---|---|---|---|---|---|---|
Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 sqm each complete all as specified and directed. | - | Each | - | - | item1 | |
Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 Sqm and not exc 4 Sqm each complete all as specified and directed. | - | Each | - | - | item2 | |
M & L for Resecuring or easing and adjusting door shutters of any size and any description without taking down shutter from frame complete all as specified and directed. | - | e all as shown in electrical plate No.5, connected to earthing test point complete including testing on completion all as specified. incl taking down old unsv earthing complete all as specified directed.S&F in repair for modular fan regulator step type, 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and directed.U Supply assembly, erection, testing commissioning of indoor wall mounted panel frame size of 1500mm x 900mm x 247mm mounted cubical type factory made IP 65 of environment friendly polycarbonate PC - GFS Insulation-enclosed power distribution board as power switchgear and control gear assembly (PSC) in accordance with IEC 61439-2wall mounted LT panel board with OEM Manufacturing certificate, Bottom parts and lids of the boxes made from impact-resistant polycarbonate, halogen and silicone-free, colour RAL 7035, transparent lid with quick action fasteners for tool operation. Burning behaviour according to IEC 60695-2-11 glow wire test + 960°C.Maximum water absorption 10 mg in accordance with DIN 53473. Protective measure : totally insulated (protection class II), the enclosure should have mechanical strength equivalent to IK10 (bidder should submit compliance for same for polycarbonate enclosure in OEM letterhead with technical bidding) suitable for 415V 3 phase 4 wire, 50HZ non metalic kiosk single door with the required provision for 3 switch gears and control gears along with the approved make. the LT panel including Separate comparment for fixing of four Nos Three Phase & four Nos single phase meter (single phase meter should be connected with three phase meter) and providing MCB and terminal, providing glass view for reading of meter complete fabrication shall be painted as per specification. Wall mounted LT panel board shall be complete with all standard accessories factory made with OEM manufacturing certificate, RTC & test certificate, including, phase indicating lamps control fuse unit, with comprising the following. Drawing from Original Equipment Manufacturing (OEM) to be got approved from accepting officer before supply of Panel. (Drawing from any other agency/ System house will not be accepted. Panel should be manufactured and assembled by OEM only. Polycarbonate enclosure & Panel manufacturer should be the same. Fabrication/ Assembling from any other system house will not be accepted. Inspection by company engineer after installation at site is mandatory and rates deemed to be included it the overall quoted rates. The bidder should submit all relevant test certificate/ compliance in OEM letterhead during technical evaluation. The bidder should provide warranty/ guarantee format in OEM letter head. The bidder should submit Routine test certificate during order execution in OEM letterhead. Supply with and including Suitable size of glands for incoming & Outgoing cables, Grounding the panel board Suitable PCC Foundation, Structure made out of angle iron Mounting Structure : RAL 7016, including taking down old panel complete all as specified and directed. Incoming : MCCB 125A, 4 pole, 25KA-1 No. RYB Indication lamp, Digital Ampere Meter. Digital Volt Meter,125A/5A, 5VA, CL.1, CT - 3nos, Fuse Terminal Block with 2A Fuse - 6 Nos Outgoing : connecting the following switch gear : (i) MCB, 63A FP Amps, 415 volts, C curve, 10 KA - 04 Nos. (ii) MCB, 32A DP Amps, 240 volts, C curve, 10 KA - 04 Nos. (iii) 04 x 3 phase electric meter - 04 Nos each. (iv) 04 x 01 phase electric meter - 04 Nos each `Supply & laying and testing commisioning cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 Sqmm 3.5 core laid in pipes, trenches/ ducts on poles including taking down old unsv XLPE cable, complete all as specified directed.ÃS & F stainless steel cloth hangers of size 29.50 x 3 x 3.5 cm with 6 No's hooks in each set fixed to wall/ doors etc with steel screws of adequate length complete all as specified and directed.yAll as per Srl item No.172.00 herein before but 5mm dia and over and including 10mm dia in stirrups, spacers and binders.item206yAll as per Srl item No.172.00 herein before but 5mm dia and over and including 10mm dia in stirrups, spacers and binders.ºM&L for Sub main wiring with 04 runs of 6 Sqmm main wire along with 02 run of 06 Sqmm earth wire (green in colour) single core FRLSH PVC insulated unsheathed 1100 volts grade, ISI marked multistranded copper conductor cable, drawn through and including adequate size rigid non-metallic PVC concealed/ surface conduit (medium grade) wherever necessary with all fittings & accessones including cutting chases for conduits as required, sinking for terminal box, making good the same including taking down old unsv sub main wiring complete all as specified and directed. Note:- Four runs of main copper conductor, two run of earth wire and one run of PVC conduit shall be measured as one unit length. M&L for Sub main wiring with 02 runs of 4 Sqmm main wire along with 01 run of 04 Sqmm earth wire (green in colour) single core FRLSH PVC insulated unsheathed 1100 volts grade, ISI marked multistranded copper conductor cable, drawn through and including adequate size rigid non-metallic PVC concealed wherever necessary with all fittings & accessones including cutting chases for conduits as required, sinking for terminal box, making good the same including taking down old unsv sub main wiring complete all as specified and directed. Note:- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length. USupply assembly, erection, testing commissioning of indoor wall mounted panel frame size of 1500mm x 900mm x 247mm mounted cubical type factory made IP 65 of environment friendly polycarbonate PC - GFS Insulation-enclosed power distribution board as power switchgear and control gear assembly (PSC) in accordance with IEC 61439-2wall mounted LT panel board with OEM Manufacturing certificate, Bottom parts and lids of the boxes made from impact-resistant polycarbonate, halogen and silicone-free, colour RAL 7035, transparent lid with quick action fasteners for tool operation. Burning behaviour according to IEC 60695-2-11 glow wire test + 960°C.Maximum water absorption 10 mg in accordance with DIN 53473. Protective measure : totally insulated (protection class II), the enclosure should have mechanical strength equivalent to IK10 (bidder should submit compliance for same for polycarbonate enclosure in OEM letterhead with technical bidding) suitable for 415V 3 phase 4 wire, 50HZ non metalic kiosk single door with the required provision for 3 switch gears and control gears along with the approved make. the LT panel including Separate comparment for fixing of four Nos Three Phase & four Nos single phase meter (single phase meter should be connected with three phase meter) and providing MCB and terminal, providing glass view for reading of meter complete fabrication shall be painted as per specification. Wall mounted LT panel board shall be complete with all standard accessories factory made with OEM manufacturing certificate, RTC & test certificate, including, phase indicating lamps control fuse unit, with comprising the following. Drawing from Original Equipment Manufacturing (OEM) to be got approved from accepting officer before supply of Panel. (Drawing from any other agency/ System house will not be accepted. Panel should be manufactured and assembled by OEM only. Polycarbonate enclosure & Panel manufacturer should be the same. Fabrication/ Assembling from any other system house will not be accepted. Inspection by company engineer after installation at site is mandatory and rates deemed to be included it the overall quoted rates. The bidder should submit all relevant test certificate/ compliance in OEM letterhead during technical evaluation. The bidder should provide warranty/ guarantee format in OEM letter head. The bidder should submit Routine test certificate during order execution in OEM letterhead. Supply with and including Suitable size of glands for incoming & Outgoing cables, Grounding the panel board Suitable PCC Foundation, Structure made out of angle iron Mounting Structure : RAL 7016, including taking down old panel complete all as specified and directed. Incoming : MCCB 125A, 4 pole, 25KA-1 No. RYB Indication lamp, Digital Ampere Meter. Digital Volt Meter,125A/5A, 5VA, CL.1, CT - 3nos, Fuse Terminal Block with 2A Fuse - 6 Nos Outgoing : connecting the following switch gear : (i) MCB, 63A FP Amps, 415 volts, C curve, 10 KA - 04 Nos. (ii) MCB, 32A DP Amps, 240 volts, C curve, 10 KA - 04 Nos. (iii) 04 x 3 phase electric meter - 04 Nos each. (iv) 04 x 01 phase electric meter - 04 Nos each | - | - | item3 | |
Dismantling boarding of any discription fixed in any position with screws complete all as specified and directed. | - | Sqm | - | - | item4 | |
Demolition of stone, brick masonry built in cement mortar incl quoins, arches, etc but exceeding ashlar facing dressed stone Work etc. complete all as specified and directed. | - | Cum | - | - | item5 | |
M&L for Fromwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed. | - | Sqm | - | - | item7 | |
M&L for Reinforced cement concrete type M 25 (design mix) (20mm graded aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves as complete all as specified and directed. | - | Cum | - | - | item8 | |
S&F Ball catches with 8mm dia steel ball and brass body and striking plates including letting in fixed complete all as specified and directed. | - | Each | - | - | item9 | |
S&F Solid single PVC door frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet used instead of Plain colour PVC sheet reinforced with M.S. tube, edges will be painted to match with prelam sheet suppling & fixing in opening as per specification & drawing including all fixtures shown on drawing complete all as specified and directed. | - | RM | - | - | item10 | |
S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M S frame shall be covered with heat moulded prelam PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and single side prelam PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail; stile &rails having one side feathered edge and on other side 10mm 90^0 bent edge, Paneling of 2mm thick prelam PVC sheet on bothfaces i.e front face & back face with particle board core to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, and including all hardware necessary for a door supplying & fixing in the frame at site as per specification & drawing. given SSR 2010 complete all as specified and directed. | - | Sqm | - | - | item11 |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.49 MB
TD71T.pdf
Tender Documents • 0.78 MB
PS-71T.pdf
Tender Documents • 0.49 MB
BOQ_852904.xls
BOQ • 0.50 MB
Make71.pdf
Tender Documents • 0.48 MB
Undertaking71T.pdf
Additional Documents • 0.10 MB
Download all tender documents and submit your bid