REPAIR/ REPLACEMENT OF UNSV FASAD BUILDING LIGHTINGS FASAD AREA/ HERITAGE LAND SCAPE LIGHT FITTINGS AND UNSV LT UG CABLES AND OTHER MISC E/M WORKS UNDER GE (E/M) BASE HOSPITAL DELHI CANTT-10

Amount

Supply, fixing, testing and Commissioning in repair outdoor type, wall illumination lighting LED FIXTURE 25-35W,LED,3000k,IP 66 Light, consisting of light weight housing made of high strength die cast aluminium and coated by static powder, to make it weather resistant, protection screen in ultra white tempered glass with high impact resistance. High precision dial to ensures precision angle adjustment. Premium thermal management by high heat conductivity aluminium alloy and thermal fins. Pure Polyester powder coating in Standard Grey Colour. Precise structure and multi-protection silicon rubber seal guarantees the fixture IP66 rated. Height – 176mm, Dia.-170mm, Weight - 2.0Kgs Power LED Module with high efficacy LED's, on Printed Circuit Board with metal core plate. CRI > 80(for white),P.F>0.9,voltage input AC100-277V,50/60Hz. In-Built Electronic Power Supply for LED Module, to ensure Protection against Short Circuit, Over- Voltage & Over- Current, with in-built surge protection. Lens shall be made of PC. Estimated LED Lifetime shall be 70,000 hours minimum. LM80 report from LED Manufacturer & TM 21 calculation shall be submitted by the contractor. Light fixture Lumen output shall be 1800-2500Lumens. LM 79 Report shall be submitted by the contractor from UL Authorised Laboratory. Sample Shall be submitted by the contractor to concerned Engr-in-Charge for approval of light fixture complete all as specified and as directed. Make: NERI- LED FIXTURE - NPL-3-12,25-35W, LED, 3000k, IP 66 or equivalent Model of GVA Lighting/Lumen Pulse

Supply, fixing, testing & Commissioning in repair outdoor type, area wall illumination lighting, 20-30W LED FIXTURE, RGBW (4in1 LED) (DMX 512 Compatible), IP 66 rated, consisting of light weight housing, made of high strength aluminium and coated by static powder, weather resistant, Protection screen in ultra white tempered glass with high impact resistance (=>IK08), High precision dial to ensures precision angle adjustment, Pure Polyester powder coating in Standard Grey Colour, Precise structure and multi-protection silicon rubber seal, Length-1000mm, Height – 66mm, Width.-64mm, Weight - 4Kgs, Power LED Module with high efficacy LED's, on Printed Circuit Board with metal core plate, Electronic Power Supply for LED Module, for Protection against Short Circuit, Over- Voltage & Over- Current, with in-built surge protection. Light fixture shall be standard DMX512 protocol compatible, the DMX decoder function shall be inbuilt the light fixture, Each light fixture shall be individually addressable & shall be able to operate with any standard DMX512 equipment. Lens shall be made of PC which shall offer 3 different beam angles 12deg./35deg./25deg.x45deg. to serve different lighting needs. Estimated LED Lifetime shall be minimum 70,000 hours. LM80 report from LED Manufacturer shall be submitted before commencement of lighting work. Light fixture Lumen output should be minimum 1100 Lumens @ full power complete all as specified and as directed. Sample Shall be submitted to Engr-in-Charge for approval of light fixture. Makes -NERI-LED FIXTURE - Linear Wall Washer NWWL-7-24,20-30W, LED, RGBW (4 in 1 LED) (DMX 512 Compatible), IP 66 or equivalent Model of Gva Lighting/Lumen Pulse

Supply, fixing, testing & Commissioning in repair including programming DMX controller, with 512 DMX channels with USB & Ethernet connectivity for programming and control setting with Clock and calendar with Sunrise/Sunset triggering, Including DMX cables, Industrial grade splitters with IP boxes complete all as specified and as directed. Make - Nicholaudie/Pharos/Matrix Notes:- (i) Minimum 10 scenes need to be configured through controller. (ii) Supporting Test Report from UL Authorised Laboratory shall be submitted by the contractor to Engr-in-Charge before installation of Controller. (iii) LM79 from UL Authorised Laboratory shall be submitted by the contractor to Engr-in-Charge before installation of Controller.

Supply, fixing, testing and Commissioning in repair outdoor type, LED FIXTURE 14-16 W per Metre, LED, 3000k, IP 67 rated (Light source), consisting of light weight housing made out of high strength aluminium, (20(W)x14(H)) with diffuser screen, LED-24V, CRI>80, source Efficacy>85lm/W, Nos. of LED's-180 Nos per Meter, LED -Epistar/Philips (SMD type), yellow glue 3M,120 degree beam angle, External Electronic Power Supply for LED Module, for Protection against Short Circuit, Over- Voltage & Over- Current, with in-built surge protection complete all as specified and as directed. Makes- NERI LED FIXTURE - NLS-15 14-16W/Meter, LED, 3000k, IP 67 (light source) or equivalent Model of Gva Lighting/Lumen Pulse/Bega/Iguzzini

Supply and fixing in repair three way "T" type nylon PA 66 Shell with brass nickel Plated terminal, silicone rubber sealing ring, Current/ Voltage 13A/250V, Size -99x65x35mm suitable for 2.5 Sqmm cable, Cable Junction boxes IP 68 weather Proof for outdoor installation with Knockout for cable entry (Black Colour) complete all as specified and as directed.

M&L in repair DMX cable, RS-485, (1 pair), 24 AWG (7x32) TC, PE/PVC, Foil+TC Braid Shld, CM, 120Ω.One 24 AWG pair stranded (7x32) tinned copper conductors, polyethylene insulation, twisted pairs, overall Beldfoil® (100% coverage) + tinned copper braid shield (90% coverage), 24 AWG stranded tinned copper drain wire, PVC jacket. Suitable Applications: RS-485, DMX-512. Electrical Characteristics - Nominal Conductor DCR-24 Ohm/1000ft & Nominal Outer Shield DCR-3.4 Ohm/1000ft . Capacitance-Nom. Capacitance Conductor to Conductor-12.8 pF/ft & Nom. Capacitance Conductor to Other Conductor to Shield - 23 pF/ft . Nominal Characteristic Impedance - 120 Ohm. Nom. Insertion Loss - 0.6 dB/100m. Nominal Delay-1.6 ns/ft & Nominal Velocity of Propagation (VP) [%] - 66 %. Max. Recommended Current [A] - Per conductor @ 25°C Ambient (10C temperature rise): 2.1 A. Voltage - 300 V RMS (UL type CM) & 30 V RMS (UL AWM 2919). Attenuation @ 1 MHz: .6 dB/100 ft nominal. UL Temp Rating: 80°C (UL AWM Style 2919) , Operating Temp Range: -30°C To +80°C. Standards - NEC Articles: 800,NEC/(UL) Specification: CM,CEC/C(UL) Specification: CM,UL AWM Style: 2919 (30 V 80°C) & CPR Euroclass: Eca complete all as specified and as directed.

M&L in repair PVC insulated copper cable, 2.5 Sqmm, three core, 1100 Volts grade, with multi stranded copper conductor, drawn through and including suitable size PVC casing capping with accessories including 2.5 Sqmm unsheathed multi stranded copper conductor as earth wire complete all as specified and as directed.

S& F In repair ARCHITECTURAL POST TOP POLE, 3 metre height Pole made of complete cast iron decorative components, where the internal fabricated pole, Made in combination of hot dip galvanised mild steel pipe sections 89mm dia, 48mm dia & covered in the outside by decorative cast iron base and columns. Decorative Cast iron Base design with the company/brand logo engraved in the cast iron mould, starting with dia 260mm for 130mm height, followed by a ring of 260 dia gradually tapering to a flat round surface of dia 170mm for 366mm height again followed by a ring dia 210mm and gradual tapering up to a dia 92mm as approved by the Engr-in-Charge. Total height of decorative cast iron base shall be 700mm and weight shall be 32 Kgs. Decorative cast iron base shall be provided with a flush door of length 228mm, width 124mm and height 30mm. Decorative cast iron flower starting with a dia 102 mm increasing gradually to 160mm and then tapering to a dia 99mm.Total height of cast iron flower is 304 mm & weight shall be 6.3 Kgs. Decorative cast iron column (2 Nos.) shall be of 80mm dia and having continuous grooves of 5mm depth along the height. The height of each pillar shall be 750mm & weight of each pillar shall be 9.5 Kgs. Decorative Cast iron top starting with dia 80mm and a ring of dia 96mm at height of 160mm then gradually increasing to dia 120mm the top half of the decorative top shall have grooves of depth 5mm, total height of cast iron top shall be 334mm, weight shall be 5.2 Kgs. + 5% tolerance shall only be allowed in weight of all cast iron parts mentioned here in before. (Description Contd to 8.01....)

(Description Contd from 8.00....) Entire pole shall be made to provide pleasing aesthetics as approved by Engr-in-Charge. After Fabrication, Entire Pole shall be hot dip galvanized (60 microns Minimum) for the effective corrosion resistance . The hot dip Galvanised pole shall be provided with an inbuilt junction box to fix 32A connectors and 6A MCB, at the bottom. The inbuilt box shall have a flush door of suitable size. The decorative pedestal shall be mounted on a suitable size steel plate. This mounting steel plate along with foundation bolts of suitable size shall be used for ensuring firm grouting into the specially designed RCC foundation. Wind pressure calculation shall be as per IS 875 (Part-3) & structural calculation report as per EN40 shall be submitted by the contractor to verify the pole design. Pole & it's parts shall be painted in 3 layer coating (coating thickness-100 microns minimum) in which 1st layer with etch primer, 2nd layer with epoxy primer & 3rd final layer with PU paint - customised colour Metallic Grey complete all as specified and as directed. Make - NERI ARCHITECTURAL POST TOP POLE model JM.11.18.043 or equivalent Model of Make- DW WINDSOR CI POLE/ GHM CI POLE.

M&L for provision of RCC Foundation for 3mtr Pole of minimum size 0.350 Metre (D) X 0.350 Metre (W) X 1.0 Metre (L) with 4 Nos 450 mm long 'J' type GI Foundation Bolts (EN grade)., 16 mm dia 2.05 metre (NS) long & 10 Nos., 8 mm dia 1.84 metre (NS) long reinforcement with 1:2:4 cement Concrete (1cement : 2 coarse sand : 4 graded stone aggregate 20 mm (NS), Shuttering i/c with 2 Nos. DWC HDPE 50/38mm dia (NS) pipe for in & out of cable and grouting 4 Nos. foundation bolts (as in item No. 1) in RCC including excavation and refilling the soil etc. complete as required at site, as recommended by OEM complete all as specified and as directed.

S& F In repair ARCHITECTURAL POST TOP Lantern, upper square frame in single piece shall be made of die cast aluminium using pressure die-casting process, with a decorative element which shall also made of die cast aluminium using pressure die-casting process, fixed on the top. Auxiliary and optical compartment should be accessed by tilting the top frame. Bottom frame with Company /brand name engraved in the mould, in single piece, made out of die cast aluminium using pressure die-casting process with a four-armed bracket with flange, which shall also made of die cast aluminium using pressure die-casting process, fixed at the bottom. Frosted Screen made of polymethylmethacrylate (PMMA) moulded in a single piece using Injection moulding process. Screen's Impact resistance: IK06. Pure polyester powder coating in Standard Grey Colour. IP Rating - IP 66. Height – 605mm, Length - 325mm, Width - 325mm,Weight - 6Kg, Area Exposed to Wind(S) - 0.15 Sqm, Power LED's Module (with CREE-XPG2 LED's - Individual LED's Minimum Luminous Flux (lm) is 130lm @ 350 mA (@ 85 °C) same shall be supported by LED manufacturer's tech sheet) in compliance with IEC 62031 (Supporting Test Report from UL Authorised Laboratory shall be submitted by the contractor), on Printed Circuit Board with metal core plate. (Description Contd to 10.01....)

(Description Contd from 10.00....) Colour Rendering Index: Ra > 70. Electronic Power Supply for LED Module, which offers Protection against Short Circuit, Over- Voltage & Over- Current, with in-built surge protection a minimum of 1.5kV (an additional surge protection device of 10kV also provided in-built the fixture). Optics with refractive lens in PC (Polycarbonate), UV Resistant & Shock Resistance-IK10.LM80 Reported LED Lifetime shall be L90@ 50,000hours minimum & Estimated LED Lifetime shall be L80 @ 100,000 hours(Ta-25°C) minimum. LM 80 report & TM 21 calculation shall be submitted by the contractor to support the same. The Light fixture shall be in compliance with IEC 60598-2-3; IEC 60598-1.(Supporting Test Report from UL Authorised Laboratory shall be submitted by the contractor) .LM79 report shall be submitted by the contractor from UL Authorised Laboratory complete all as specified and as directed. Make - NERI- LED FIXTURE - LIGHT 851-35-45W Power Module LED, 3000K, or equivalent Model of Make- DW WINDSOR/ GHM.

Supply, laying & testing in repair XLPE insulated, PVC inner sheathed, armoured with galvanised steel strip or wire, heavy duty, LT underground cable, ISI marked, with aluminium multistranded conductor, 1100 Volt grade, size 6 Sqmm, 2 core, laid in trenches/ duct, passing through pipe/ duct or fixed on pole and connecting with Thimble and Lugs including taking down old cable complete all as specified & as directed.

Saini Enterprises

R R Associates

J.P. Enterprises

A B K Enterprises

Shiv Enterprises

Vishal Traders

M/S Rohit Enterprises

Flint India

SANJEEV ENTERPRISES