GE(S) BTD 41 of 2019-20 COMPREHENSIVE MAINTANCE AND REPAIR TO ROOF TREATMENT RAIN WATER PIPES OHT AND CONNECTED WORKS IN CERTAIN BLDGS IN ZONE G AND H UNDER AGE BR-I UNDER GE(S) BAHINDA AT BATHINDA MIL STN

Amount

Dismantling / taking down 15 mm dia bib cock/ stop cock/angle cock of any pattern or of any type and re-fixing the same after minor repairs such as replacement of washers etc complete all as specified and directed. Note :- Any major parts such as jumpers brass/ spindles/ caps etc to be measured as supply only and paid for separately under respective item.

S & F in repairs 15mm bore chromium plated brass bib taps with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified

Supply and fixing in repairs bib cock PTMT standard 15 mm dia of any colour high pressure screwed for iron pipe & fixed ( male or female as required) complete all as specified and directed Make : Prayag/Polytuff

S & F in repairs 15mm bore, Stop valves, cast copper alloy,screwed down,high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed all as specified

Supply only Jumper brass with rubber or leather washer complete for 15 mm dia bib cock / stop cock brass complete all as specified and directed

Supply only spindle brass for 15 mm dia CP Bib cock/ pillar cock/ concealed cock of any pattern complete all as specified and directed.

Supply only capstan head / cap of CP bib tap / CP stop cock 15 mm size complete all as specified and directed.

S & F in repairs 15mm bore fancy type chromium plated stop valve cast copper alloy, with long shank & cup (concealed type) with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete including necessary repair to existing tiles, cement plaste all as specified

S & F in repairs 15mm bore, gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified

S & F in repairs 20mm bore, gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified

S & F in repairs 15mm bore, brass CP central hole basin mixer for mixing hot & cold water screwed down for iron pipe all as specified

S&F CP brass hot & cold 15mm dia wall mixture for mixing hot & cold water with connecting legs & flengs in complete all as specified.

S & F in repair CP leg for wall mixtur screwed to GI fitting complete all as specified.

S & F in repair CP extension nipple 25mm to 40mm long screwed to GI fitting complete all as specified.

S & F in repair brass spandle with washer complete suitable for wall mixture/WHP mixture complete all as specified.

S & F in repair brass leg for centre hole WHP complete all as specified.

S & F in repairs 15mm bore pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with o without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe all as specified

S & F in repairs brass chromium plated shower rose 125mm dia with swivel joints with and including suitable shower arm any size, complete all as specified

S&F in repairs PVC waste pipe with socket suitable for connection to Waste fittings of 32/40mm dia, and of length minimum 75 cm all as specified

S & F in repairs 32/40mm waste fittings, brass chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and flynuts, flange end bedded in red lead cement complete all as specified

S & F in repairs 40/50 mm waste fittings for stainless steel sink (sink coupling), brass chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and flynuts, flange end bedded in red lead cement complete all as specified

S & F in repair PVC connection 15 mm size with brass nuts of length 600 mm of approved quality

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white, including connection to drain (or outgoing pipe) and to flushing pipe, ant-syphonage pipe, etc. complete all as specified

Fixing only in repairs vitreous china wash down water closet pan (pedestal pattern), white, including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe, etc. complete all as specified

S & F in repairs vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor and fixed complete all as specified and directed.

S & F in repair vitreous china wash basin, white, flat back, size 550 x 400mm excluding taps, wastes but including brackets complete all as specified

Fixing only in repair vitreous china wash basin, of any description & size, excluding taps, wastes but including brackets complete all as specified

S & F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x460mm bowl size 410mm x330mm x160mm complete all as specified

S & F in repairs Toilet paper holder recessed type stainless steel complete all as specified

S &F in repairs 40mm bore low density polyethylene pipes (LDPE) of pressure rating 6 kgf/Sqmcm fixed complete to walls (including fixing clamps), ceiling or laid in floors etc as in spouts in sunken & waste pipes etc incl all fittings such as elbows, tee or connecters etc complete all as specified

S & F in repair PVC valveless, syphonic action type flushing cistern 10 ltr capacity, low level, with inlet ball valve, float and handle including brackets, PVC bend long type and connectin to flush pipe of any size and pattern complete all as specified

S&F in repair flush pipe of polyethene of low or high density or PVC, 32mm dia, for low level cistern and fixed complete all as specified and directed.

S & F in repairs plastic water closet seat cover, white/ivory colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device

M&L for 25mm dia fancy type PVC coated on MS pipe coloured curtain rod with brackets and knobs at both ends as per site requirement including taking down old existing PVC conduit pipes with accessories complete all aspecified

S & F in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges all as specified

S & F in repairs Jet spray, CP, brass body with wall hook and 1 mtr SS pipe complete all as specified

Dismantling and disconnecting of existing CI soil vent pipe 100 mm bore fixed to wall,laid in trenches incl all fittings & accessories

Dismantling and disconnecting of existing CI soil vent pipe 75 mm bore fixed to wall,laid in trenches incl all fittings & accessories

S & F cast iron soil waste and vent pipe 75mm bore with or without ears fixed with chemical cement joints laid in trenches/floors or fixed in walls, all as directed.

S & F cast iron soil waste and vent pipe 100mm bore with or without ears fixed with chemical cement joints laid in trenches/floors or fixed in walls, all as directed.

Fixing only cast iron soil waste and vent pipe 75mm bore with or without ears fixed with chemical cement joints laid in trenches/floors or fixed in walls

Fixing only cast iron soil waste and vent pipe 100mm bore with or without ears fixed with chemical cement joints laid in trenches/floors or fixed in walls

Sealing only joints of cast iron pipes and fittings with chemical cement and making the joints leak proof complete all as specfied

S&F in repairs oval access doors to cast iron pipes of 75mm bore with rubber washer packing & bolts & nuts as required complete all as specified

S&F in repairs oval access doors to cast iron pipes of 100mm bore with rubber washer & bolts & nuts as required complete all as specified

S & F in repairs CI bends any radius, 100mm bore, diminishing pieces or tapers, etc with or without oval access doors, complete all as specified

S & F in repairs CI bends any radius, 75mm bore, diminishing pieces or tapers, etc with or without oval access doors, complete all as specified

S & F in repairs 100mm bore CI branch pieces, double (spigot or socketed type) with oval access doors

Fixing only CI fittings 75/100mm size of any type & description

S&F in repairs Mild steel galvanised wire cloth 0.46mm nominal dia of wire and 1.18 mm average width of aperture fixed with tinned tacks or galvanised wire staple, complete all as specified

S & F in repairs mild steel Butt Hinges, 100 mm size, medium weight, cold rolled fixed with screws/welding to wooded/steel frames or chowkats, complete all as specified

M&L welding in repairs with thickness of metal not exceeding 6mm and not exceeding 2.5 cm in length etc complete all as specified and directed by Engineer - in – Charge.

M&L in repairs 2nd HW plain fillets, square, rectangular or triangular in section, wrought, secured with nails/brads or secured with screws, cross sectional area exc 6 sqcm and n. exc 13 sqcm, complete all as specified

S&F for MS sliding door bolt 250 mm long stove enamelled black with bright bolt etc.

S & F in repairs 200 mm aluminium anodised, barrel tower bolts of extruded section all as specified

Supply and fixing in repair 125 mm long aluminium handles, fabricated type, anodised and fixed complete all as specified and directed.

S&F of MS 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete as specified

S&F for MS tower bolt 200 mm long stove enamelled black with bright bolt.

S&F for MS pressed handles, oval type stove enamelled black 150 mm long.

S & F floor door stopper 140mm size of aluminium alloy body and tounge, anodised, with hard drawn steel spring all as specified

S & F hasp & staple 100mm size, safety type, Aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws all as specified

Supply and fixing in repair 40 mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished and fixed complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/springs clips

S & F 3.0mm thick sheet glass ordinary quality and glazing with oil putty in squares n. exc 0.50 Sqm in each pane all as specified

S & F 3.0mm thick figured glass, pin head type and glazing with oil putty in squares n. exc 0.50 Sqm in each pane all as specified

S & F 3.0mm thick sheet glass ordinary quality and glazing with oil putty in squares exc 0.50 Sqm in each pane all as specified

Taking down chowkhats or frame with shutters (without taking off shutters from the frames) and refixing in the same opening and area exc 1.50 sqm but n. exc 4.0 sqm each all as specified.

Taking down shutters of any description exceeding 1.00 sqm but not exceeding 2.00 sqm each and refixing in the same opening including easing and adjusting including renewal of unserviceable screws etc. complete all as specified

Taking down shutters of any description not exceeding 1.00 sqm each and refixing in the same opening including easing and adjusting including renewal of unserviceable screws etc. complete all as specified

Re-securing or easing & adjusting, without taking down shutter of any description exc 1 sqm but n. exc 2.0 sqm each complete all as specified and directed.

Re-securing or easing & adjusting, without taking down shutter of any description not exc 1.00 sqm each complete all as specified and directed.

M&L 2nd class hardwood, beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc. including painting/polishing and matching complete all as specified

S&F in repairs 18/19mm thick pre-laminated particle board, interior grade, fixed with screws to timber frame work as in kitchen cupboards, drawers, shutters, shelves etc including teak wood lipping, 6mm thick on edges fixed with nails etc, complete all as specified

Taking down or up 15 mm bore GI tubing and connection including cleaning for refixing or removal all as specified

Taking down or up 20 mm bore GI tubing and connection including cleaning for refixing or removal all as specified

Taking down or up 25 mm bore GI tubing and connection including cleaning for refixing or removal all as specified

S & F GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified

S & F GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified

S & F GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm in short lengths, complete all as specified

S & F GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, bore of pipe 25 mm complete all as specified

Refixing old GI tubing 15 mm bore pipe and connections in new or old position as on walls ceiling floors etc all as specified (i) Cleaning of pipe is included in ser No 74 here in before (ii) Rates quoted by the contractor deemed to be included S & F new fittings as required Make: Tata/Prakash/Jindal ISI mark

Refixing only old GI tubing 20 mm bore pipe and connections in new or old position as on walls ceiling floors etc all as specified (i) Cleaning of pipe is included in ser No 75 here in before (ii) Rates quoted by the contractor deemed to be included S & F new fittings as required Make: Tata/Prakash/Jindal ISI mark

S & F in repair ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of size 20mm bore ( weight 210 gms Minimum) complete all as specified

S & F in repair ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of size 15mm bore ( weight 210 gms Minimum) complete all as specified

S&F in repair PVC Knob/Handle (as per sample) for 10 ltr capacity PVC low level flushing cistern complete all as specified and directed.

S&F in repair PVC Syphon Kit (as per sample) for 10 ltr capacity PVC low level flushing cistern complete all as specified and directed.

S&F in repair complete Veta washer set (as per sample) for 10 ltr capacity PVC low level flushing cistern complete all as directed.

Fixing only in repair low level flushing cistern any capacity after carrying out minor repairs such as stopping of leakage etc. complete all as specified and directed.

S&F in repair covers for PVC overhead water tanks of any capacity (as per sample) complete all as specified and directed.

S&F in repairs two layers rotational moulded polyethylene water storage tanks (ISI marked) (cylindrical vertical top) hoisted and fixed in position 500 litre capacity complete all as specified and directed.

S&F in repairs ( to be fixed with screws & welding as required) continuous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flap (when open) 30mm all as specified

S & F for catcher such as in cupboards etc to catch & support shutters of best quality all as specified

M&L for preparation of new or previously untreated wood and wood based surfaces of any description exc 10 CM width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified

S & F in repairs 110 mm bore PVC (SWR) of 6 kg/CM Square pressure fixed to walls with MS clamps of 25 x 3 mm flat iron and fixed with 75 mm long screw with PVC gutties n.exc .1.80 mtr centre to centre distance all as specied and directed.

Fixing only in repairs PVC rain water pipes of any descrption, jointing pipe with elbow/pipe joint with chemical cement/suitable adhesive & providing MS clamps of 25 x 3 mm flat iron and fixed with 75 mm long screw with PVC gutties n.exc .1.80 mtr centre to centre distanceall as specified

S & F 110 mm bore, PVC (SWR) fittings such as bends, tee, shoe etc; fixed to PVC pipes, complete all as specified

M & L for flush pointing to brick tiles/brick laid flat as in roof, paving/floor etc in CM 1:3 mixed with 5% of crude oil by weight of cement including raking out joints/pointing etc. complete all as specified and directed.

S & F in repairs brass chromium plated bottle traps for wash basins with inlet and out let screwed for pipe or connections including necessary packing, union and cap all as specified

S & F in repairs soap dish stainless steel , complete all as specified

S&F stainless steel plate racks of size 900mmx600mmx250mm having thickness of SS strip 1mm, fixed on wall etc complete all as specified & directed by Engr-in-Charge.

S & F in repairs CP grating (with or without waste hole), 125 mm size, fixed on floor/nahani traps etc complete all as specified

M & L Non-skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.06 sqm but n. exc 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed in CM 1:6, including dismantling of old tiles of any description etc complete all as specified

Renewing non skid /glazed ceramic tiles in patches in floor or walls, area n. exc 5 sqm including cutting out broken tiles carefully, preparing beds and laying or setting, jointing & pointing new tiles complete all as specified. Note :- New tiles shall be paid at supply only rate separately)

Cutting chases in brick walls girth exc 10 cm but not exc 20 cm wide for concealed water tubing etc and making good in CM 1:3 or PCC 1:2:4 as required complete all as specified and directed.

Dismantling carefully cement concrete in floor, etc around floor traps or any other concealed fittings, sealing joints with solvent cement or other suitable materials and making joint leak proof and making good surfaces with PCC 1:2:4 or CM 1:3. Note :- repair/replacement of tiles in floor & floor trap if required shall be measured and paid separately), complete all as specified.

Supply only floor trap 75 mm dia with grating including jointing to waste pipe

Supply only non skid ceramic coloured tiles 300 x300 x7mm thick

Supply only glazed ceramic coloured tiles 450 x300 x7mm thick

Supply only glazed ceramic coloured tiles 300 x200 x7mm thick

Demolition of re-inforced cement concrete of any description & in any position not otherwise specifically provided for, complete all as specified

Demolition of re-inforced cement concrete of any description not exceeding 15cm thickness & in any position not otherwise specifically provided for, complete all as specified

M&L for RCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) for slabs supported on walls, shelves, beams and columns, lintels, facia and the like, complete all as specified.

Material and labour for mild steel TMT bars 10mm dia and over cut to length bent to shape, required including cranking, bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed by the Engineer-in-Charge. (NOTE : Weight of binding wire shall not be considered for measurement and payment purpose.)

Material and labour for mild steel TMT bars 6 mm to 8mm dia cut to length bent to shape, required including cranking, bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed by the Engineer-in-Charge. (NOTE : Weight of binding wire shall not be considered for measurement and payment purpose.)

Formwork for rough finished surfaces to soffit of suspended slab such as roof slab, floor slab/chajjas/beams/colns/fins/facia and etc not exceeding 200mm tick complete all as specified.

Demolition of brick work or stone / boulder masonary, built in cement mortar including all quoins, arches, pillars etc., in foul condition complete all as specified and directed.

M&L brick work with sub class `B' old size bricks straight or curved on plan exc 6.0m mean radius built in cement mortar 1:6 complete all as specified.

M&L brick work with sub class 'B' old size bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 but except bricks (old serviceable bricks to be used) complete all as specified Note : The rate includes for cleaning of old bricks.

M&L brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick walls built in CM (1:4), etc; complete all as specified

M&L flush pointing to brick walls etc in cement mortar 1:4 including racking out old joints all as specified and directed by Engineer-in-Charge

Demolition of brick work or stone / boulder masonary, built in cement mortar including all quoins, arches, pillars etc., complete all as specified

S&F in repair ball brass valves, high pressure, with polythene float & fly nut complete, screwed for iron pipe or brass ferrule,of size 20mm, etc complete all as specified

M&L 25mm thick cement concrete type B-1, 1:2:4 (20 mm graded stone aggregate) as floors, sub-floors etc and finishing surfaces of concrete topping as even & fair or even & rough to receive the topping layer all as specifed

M&L PCC 1:5:10 type D-2 using 40mm graded crushed/stone agg for foundations, filling & mass concrete, sub-base & sub-floors, etc. complete all as specified.

M&L Mild Steel framed work of Gde Fe-410-0 or Fe-310-0 as in doors chowkats (single or double) of angles or other section with gusset plates, rails, braces, bands straps, hold fast grill etc, complete and including necessary welding for fixing flat iron for fixing hooks and hinges.

Taking down cement or cement lime plaster of any description from brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specied and directed by Engineer-in-Charge.

M& L rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces and finishing even & fair incl preparation of these surfaces for further treatment, complete all as specified

M&L rendering 15mm thick in CM (1:6) other than fair faces of brick work or concrete surfaces and finishing even & fair incl preparation of these surfaces for further treatment, complete all as specified

M& L rendering 10 mm thick in CM (1:3) and finishing even & fair as in ceiling incl preparation of these surfaces for further treatment, complete all as specified (Building height upto two story)

M&L applying two coats of oil bound distemper on newly plastered surfaces on walls etc. over a coat of primer including preparation of surface, complete all as specified

M&L applying three coat of white wash on newly plastered surfaces on wall including preparation of surface, complete all as specified and directred by Engineer-in-Charge.

M&L for applying two coats of weatehr proof exterior emulsion paint over a coat of exterior primer over newly plastered wall and ceiling surfaces including cornices & pillasters etc as per manufacturer's specification & instruction including preparation of surface, complete all as specified and directed by Engineer-in-Charge

M&L applying three coat of white wash on newly plastered surfaces on ceiling complete all as specified and directred by Engineer-in-Charge.

M&L appply for a layer of hot blown bitumen of 85/25 penetration grade @ 1.75 kg/sqm incl cleaning the surface of roof or sunken etc complete all as specified

M&L 15mm thick cement plaster in CM 1:4 with water proofing compound (WPC to measurment & paid separately) and finishing top surface even & smoth as in roof slab /sunken floor , etc all as specified

supply only water proofing compound make.

M&L in repairs marble work (Udaipur green slabs) not less than 16 mm thick (table rubbed and polished) as in cooking platforms and like in cement mortar (1:4) in pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade all as specified including rounding the edges.

Taking down chowkats or frame with shutter (without taking off shutters from the frames) not exceeding 1.50 sqm each and removal from site all as specified

Taking down chowkats or frame with shutter (without taking off shutters from the frames) exc 1.50 sqm but n. exc 4.00 Sqm each and removal from site all as specified

Taking down shutters of any description exceeding 1.00 sqm but not exceeding 2.00 sqm each and removing to store all as specified

S & F pressed steel frames for doors with one or more rebates including hinges, lock strike plate, fixing lugs, etc., size of frame 125 x 60mm, complete all as specified (thickness of steel sheet shall be 1.25mm)

S & F pressed steel frames for doors with one or more rebates including hinges, lock strike plate, fixing lugs, etc., size of frame 105 x 60mm, complete all as specified (thickness of steel sheet shall be 1.25mm)

S & F pressed steel frames for doors with one or more rebates including hinges, lock strike plate, fixing lugs, etc., size of frame 75 x 60mm, complete all as specified (thickness of steel sheet shall be 1.25mm), complete all as specified

M & L for PCC 1:3:6 type C1 (using 20mm graded crushedstone aggregates) as in filling back of pressed steel door frames/chowkats and for fixing hold fasts, etc., complete all as specified

S & F for factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube fixed in opening complete as per specifications & drawing

S & F for 30 mm thick factory made solid panel PVC door shutter confirming to criteria of testing as per IS : 4020, consisting of frame made out of MS tube of 19 guage thickness & size 19x19mm for stiles and 15x15mm for top & bottom rails MS frames shall have a coat of red oxide primer of approved make and shall be covered with 5mm thick heat moulded PVC `C' channel of size 30x50mm forming styles and 5mm thick 75mm wide PVC sheets for top rail lock rail and bottom rail on either side and 10mm (5mmx2) thick 20mm wide cross PVC sheet as gap insert for top rail and bottom rail panelling of 5 mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with 30 mm wide x 5 mm thick PVC sheet beading on either side and joined together with solvent cement, adhesive and an additional 5 mm thick PVC strip of 20 mm width is to be struck on the interior side of 'C' channel using PVC solvent adhesive complete as per manufacturers specifications & drawings

S&F 2nd class HW 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauge, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass, gauze, etc.; sizes of members of shutters as specified in SSR Part I Section 8, Clause 8.24 (a) all as specified

M & L 35mm thick flush shutters (factory made), solid core construction, with block board core and plywood face panels, commercial type on both sides all as sppecified

S&F for steel windows/ventilators with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded, complete all as specified

S&F for windows/ventilators with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with out glazing bars, all as specified

S & F MS galvanised mild wire cloth 0.46 mm nominal dia of wire and avarage width of aparture 1.18mm and fixed with tinned tacks ro galvanised wire stapple complete all as specified

S & F in mild steel Butt Hinges, 100 mm size, medium weight, cold rolled fixed with screws/welding to wooded/steel frames or chowkats, complete all as specified

S & F 200 mm aluminium anodised, barrel tower bolts of extruded section all as specified

S & F aluminium anodized handles cast type 125mm long complete all as specified

S&F in repairs tank nipple all as specified and directed by Engineer-in- Charge

Demolition of cement concrete (unreinforced) including tiles of any description & terrazo finish, etc. n. exc 15 cm thickness (below or above ground level)incl rubbish off the premises all as specified

M&L for cement concrete type B1, 1:2:4 mix (using 20mm graded crushed stone aggregate) as in bedding, benching of manholes, copings, roof kerbs & surface channel etc. complete all as specified.

M & L for precast cement concrete (1:2:4) type B1 using 20mm graded stone aggregate in kerb stone, manhole covers, kitchen sink slab etc with plain fair faces including chamfers, eatherings,throating etc. and setting in mortar set in cement mortar (1:4) complete all as specified and as directed by Engineer-in-Charge.

M & L 50mm thick, cement concrete 1:3:6, type C2 (using 40mm graded crushed stone aggregate) as in floors, plinth protection, paths, etc laid in alternate bays and finishing top surfaces even and smooth (without using extra cement) all as specified

M&L providing cement concrete (RCC/PCC) 1:2:4, type B0 (using 12.5mm graded crushed stone agrregate) as in broken or cracked Chhajjas, RCC columns, beams, stairs/steps etc in one or two layers as required (thickness from 25mm to 40mm) and finshing the surface with 15mm thick cement plaster in CM 1:4 including taking out loose/cracked concrete portion and plaster etc and applying neat cement slurry before providing concrete, complete all as speicified (Note : 1. Rates deemed to include for any scaffolding/ ladders or any other mean to work in two story buildings including welding of reinforcement. to be provided for repairs of chhajjas, beams, columns, stair case, fins, facia etc. 2. The re-inforcement shall be measured & paid in subsequent item separately )

S&F in repairs mild steel handles suitable for steel windows/ventilators as directed.

S&F in repairs mild steel peg stay suitable for steel windows/ventilators as directed.

M&L for applying two coats of cement base paint on newly plastered wall surfaces including cornices & pillasters etc as per manufacturer's specification & instruction including preparation of surface, complete all as specified

M & L for cleaning of old Roof wall/ concrete surfaces & applied a coat of cold bituminous primer over cleaned surface @ 0.30 Kg/Sqm followed by APP modified five layer ploymeric membrane 3mm thick, minimum wt 3.60 kg/Sqm reinforced with polyester non-woven fabric (weighing not less than 150gms/Sqm ) manufactured by M/S STP Ltd/IWL India Ltd or as per list of make in tender documents approved by GE, laid as per the manufactures instruction with side over lap of 75mm & end over lap of 100mm & tucked into the chases on vertical surfaces if required & finally finished with bituminous aluminum paint @ 0.10 Kg/Sqm complete all as specified and directed.

Disconnecting existing tanks 500 ltrs capacity, setting aside for repairs, cleaning, etc. and removing unserviceable tanks complete all as specified and directed.

Supply and fixing three layers 500 liter HDPE water storage tanks polyproof. white in colour rotational moulded polyethylene (cylindrical vertical with closed top) hoisted and fixed in position including S&F of suitable size inlet/outlet arrangement & other accessories complete all as specified and as directed by Engineer-in-Charge.

Disconnecting existing tanks 500 ltrs capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed

Dismantling of brick tiles or terracing tiles, single layer on roof and disposal off retrieved material up to a distance of 100m where directed

Material and labour for 40mm thick brick tiles laid on mud mortar & joints grouted flush pointed in cement mortar (1:3) mixed with 5% of crude oil by weight of cement complete all as specified and directed by Engineer-in-Charge.

Material and labour for 40mm thick brick tiles laid on mud mortar & joints grouted flush pointed in cement mortar (1:3) mixed with 5% of crude oil by weight of cement but except brick tiles complete all as specified and directed by Engineer-in-Charge.

M & L for 20mm thick screed bed in CM (1:4) as on roof top surfaces, parapet, vertica surfaces of finish even and smooth without using extra cement complete all as specified and directed.

Dismantling old asbestos cement, corrugated or semi-corrugated sheets in roof covering complete all as specified and as directed by Engineer-in-Charge.

M&L 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc Fixed with L-type or screws J-type or cranked hook bolts complete all as specified and as directed

M&L 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc Fixed with L-type or screws J-type or cranked hook bolts but except sheets complete all as specified and as directed

M&L 6mm thick one piece one piece plain angular ridges fixed with L-type or screws J-type or cranked hook bolts complete all as specified and as directed

M&L for prepainted galvatume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550Mpa as in wall, fixed with slef tapping screws all as specified including dismantling old AC sheets of any description complete all as specified and directed.

S & F Pre-painted galvatume aluminium zinc coaring GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including dismantling of old sheet.

Supply and replacing of engine Oil 20W40 for servecing DG set of different capacity make Castrol/CRB/HP

S & F in repairs aluminium anodized Butt Hinges, 100 mm size, fixed with screws to wooded/steel/PVC frames or chowkats etc, complete all as specifiedand directed.

S & F aluminium anodized Butt Hinges, 100 mm size, fixed with screws to wooded/steel/PVC frames or chowkats etc, complete all as specifiedand directed.

M/s Kamal Builders

B D BATRA AND SONS

M/s Verma Construction Company

KARTIK BUILDERS