Nit No 49/2025-26 Se Dausa

Select, At Par, Excess (+), Less (-) IOCL

Tender Inviting Authority: Superintending Engineer,PHED Circle Dausa

Name of Work: “Annual rate contract for the work of providing, laying, jointing and testing of HDPE/DI pipelines with interconnection works under Rural/Urban Area of PHED Division Sikrai, District-Dausa”

Contract No: NIT No 49/2025-26 (Esst. Cost 160.00 Lacs )

Sl. No. 12 Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category

1 PIPE LINE WORK

2 Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in trenches for water supply pipe lines, shoring and strutting if required as per required gradient and line including safety provisions using site rails and stacking excavated stuff including up to all required lead cleaning the site etc. complete for lifts up to 1.5 depth and strata as specified. The work also includes depositing and refilling of trench with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed for lead up to 50 mtr. including required all safety provisions etc. All types of soil BI01010001010000000000000515BI0100001113 1 Cum 200 Excess(+) Full Conversion INR

3 Add extra for trenches for every addition lift over item no. 4.1 BI01010001010000000000000515BI0100001114

4 Above 1.5 and upto 3.0 mtr BI01010001010000000000000515BI0100001115 1 Cum 20 Excess(+) Full Conversion INR

5 Above 3.0 and upto 4.5 mtr BI01010001010000000000000515BI0100001116 1 Cum 39 Excess(+) Full Conversion INR

6 Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in trenches for water supply pipe lines, shoring and strutting if required as per required gradient and line including safety provisions using site rails and stacking excavated stuff including up to all required lead cleaning the site etc. complete for lifts up to 1.5 depth and strata as specified. The work also includes depositing and refilling of trench with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed for lead up to 50 mtr. including required all safety provisions etc. All types of soil BI01010001010000000000000515BI0100001117

7 Ordinary rock BI01010001010000000000000515BI0100001119 1 Cum 365 Excess(+) Full Conversion INR

8 Add extra for trenches for every addition lift over item no. 4.3 BI01010001010000000000000515BI0100001123

9 Above 1.5 and upto 3.0 mtr BI01010001010000000000000515BI0100001124 1 Cum 37 Excess(+) Full Conversion INR

10 Above 3.0 and upto 4.5 mtr BI01010001010000000000000515BI0100001125 1 Cum 73 Excess(+) Full Conversion INR

11 Dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by CC cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. Measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work. BI01010001010000000000000515BI0100001126 1 Cum 757 Excess(+) Full Conversion INR

12 Dismantling of flexible pavement for pipe line and chambers by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. Measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made for trench width more than specified, re-handling of material/earth to complete the tasks per technical specification and scope of work. BI01010001010000000000000515BI0100001127

13 Bituminous courses BI01010001010000000000000515BI0100001128 1 Cum 416 Excess(+) Full Conversion INR

14 Granular courses BI01010001010000000000000515BI0100001129 1 Cum 296 Excess(+) Full Conversion INR

15 Providing and laying in position cement concrete M10 grade nominal mix 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. Measurement for CC work to be made as per standard trench width specified in tender document and no extra payment shall be made for trench width more than specified, complete work as per technical specification and scope of work. BI01010001010000000000000515BI0100001130 1 Cum 4678 Excess(+) Full Conversion INR

16 Providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. Measurement for CC work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work. BI01010001010000000000000515BI0100001131

17 M20 grade Nominal Mix 1:1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size BI01010001010000000000000515BI0100001132 1 Cum 6162 Excess(+) Full Conversion INR

18 Plain cement concrete pavement of M-30 Grade BI01010001010000000000000515BI0100001133 1 Cum 6497 Excess(+) Full Conversion INR

19 Providing, lowering, laying and jointing in trenches, standard lengths HDPE ISI marked Pipes as per IS-4984: 1995 (amended upto date) with necessary jointing material like mechanical connectors, i.e. thread/ insert joint/ quick release coupler joint/ compression fitting joint or flanged joint and specials jointing pipe by electro fusion welding method, including all taxes , transportation and freight charges, inspection charges, loading/ unloading charges, stacking of pipes, including cost of labour and material, specials (Tee, bend etc.), satisfactory hydraulic testing, disinfection etc. complete as per technical specifications and direction of Engineer-in-charge of following class and diameter. (excluding earth work) . Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately. Supply may be in coil or straight length in 6 M/12 M. BI01010001010000000000000515BI0100001134

21 75 mm BI01010001010000000000000515BI0100001136 1 RMT 217 Excess(+) Full Conversion INR

22 90 mm BI01010001010000000000000515BI0100001137 1 RMT 306 Excess(+) Full Conversion INR

23 110 mm BI01010001010000000000000515BI0100001138 1 RMT 463 Excess(+) Full Conversion INR

24 Providing, lowering, laying and jointing in trenches, standard lengths HDPE ISI marked Pipes as per IS-4984: 1995 (amended upto date) with necessary jointing material like mechanical connectors, i.e. thread/ insert joint/ quick release coupler joint/ compression fitting joint or flanged joint and specials jointing pipe by butt fusuion/electro fusion welding method, including all taxes , transportation and freight charges, inspection charges, loading/ unloading charges, stacking of pipes, including cost of labour and material, specials (Tee, bend etc.), satisfactory hydraulic testing, disinfection etc. complete as per technical specifications and direction of Engineer-in-charge of following class and diameter. (excluding earth work) . Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately. Supply of pipe shall be in straight length in 6 M/12 M. BI01010001010000000000000515BI0100001139

26 125 mm BI01010001010000000000000515BI0100001141 1 RMT 664 Excess(+) Full Conversion INR

27 140 mm BI01010001010000000000000515BI0100001142 1 RMT 827 Excess(+) Full Conversion INR

28 160 mm BI01010001010000000000000515BI0100001143 1 RMT 1041 Excess(+) Full Conversion INR

29 180 mm BI01010001010000000000000515BI0100001144 1 RMT 1308 Excess(+) Full Conversion INR

30 200 mm BI01010001010000000000000515BI0100001145 1 RMT 1567 Excess(+) Full Conversion INR

31 Providing, lowering, laying and jointing in trenches, standard lengths HDPE ISI marked Pipes as per IS-4984: 1995 (amended upto date) with necessary jointing material like mechanical connectors, i.e. thread/ insert joint/ quick release coupler joint/ compression fitting joint or flanged joint and specials jointing pipe by electro fusion welding method, including all taxes , transportation and freight charges, inspection charges, loading/ unloading charges, stacking of pipes, including cost of labour and material, specials (Tee, bend etc.), satisfactory hydraulic testing, disinfection etc. complete as per technical specifications and direction of Engineer-in-charge of following class and diameter. (excluding earth work) . Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately. Supply may be in coil or straight length in 6 M/12 M. BI01010001010000000000000515BI0100001146

33 90 mm dia BI01010001010000000000000515BI0100001148 1 RMT 449 Excess(+) Full Conversion INR

34 110 mm dia 1 RMT 675 Excess(+) Full Conversion INR

35 Providing, lowering, laying and jointing in trenches, standard lengths HDPE ISI marked Pipes as per IS-4984: 1995 (amended upto date) with necessary jointing material like mechanical connectors, i.e. thread/ insert joint/ quick release coupler joint/ compression fitting joint or flanged joint and specials jointing pipe by butt fusuion/electro fusion welding method, including all taxes , transportation and freight charges, inspection charges, loading/ unloading charges, stacking of pipes, including cost of labour and material, specials (Tee, bend etc.), satisfactory hydraulic testing, disinfection etc. complete as per technical specifications and direction of Engineer-in-charge of following class and diameter. (excluding earth work) . Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately. Supply of pipe shall be in straight length in 6 M/12 M. BI01010001010000000000000515BI0100001150

37 125 mm dia BI01010001010000000000000515BI0100001152 1 RMT 936 Excess(+) Full Conversion INR

38 140 mm dia BI01010001010000000000000515BI0100001153 1 RMT 1172 Excess(+) Full Conversion INR

39 160 mm dia BI01010001010000000000000515BI0100001154 1 RMT 1514 Excess(+) Full Conversion INR

40 180 mm dia BI01010001010000000000000515BI0100001155 1 RMT 1886 Excess(+) Full Conversion INR

41 200 mm dia BI01010001010000000000000515BI0100001156 1 RMT 2313 Excess(+) Full Conversion INR

42 Providing, lowering, laying in trenches, aligning, fixing in position and jointing Ductile Iron (DI) ISI marked K-7 grade S&S pipes as per IS:8329-2000 (amended upto date), with internal cement mortar lining suitable for potable water with rubber ring (EPDM) joints as per IS: 5382-1985 including all taxes (Central and local), transportation and freight charges, inspection charges, loading/ unloading charges, including cost of labour and material, specials (Tee, bend etc.) satisfactory hydraulic testing, disinfection etc. complete as per technical specifications and direction of Engineer-in-charge. (excluding earth work) Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately. BI01010001010000000000000515BI0100001157

43 80 mm dia BI01010001010000000000000515BI0100001158 1 RMT 1408 Excess(+) Full Conversion INR

44 100mm dia BI01010001010000000000000515BI0100001159 1 RMT 1464 Excess(+) Full Conversion INR

45 150 mm dia BI01010001010000000000000515BI0100001160 1 RMT 2082 Excess(+) Full Conversion INR

46 200MM dia BI01010001010000000000000515BI0100001161 1 RMT 2554 Excess(+) Full Conversion INR

47 Providing, lowering, aligning, fixing in position in pipe line, CI D/F Sluice valves of approved make of following Pressure rating & dia complete, confirming to IS:14846 (amended up to date) and of following specifications: Body, Bonnet, Wedge, Gland, Thrust Plate, Cap & Hand wheel of Grey cast iron of IS:210/ FG200 Stem - SS 304 ,Body Seat ring, Wedge facing ring & Bushes - LTB2/ SS , Face to face dimensions as per IS 14846/2000 (amended up to date), All exposed machined ferrous surfaces shall be painted with one coat of aluminium red oxide primer conforming to IS:5660 and two coats of black Japan paint conforming toType B of IS 341or paint conforming to IS9862 or IS2932( Non-Toxic- suitable for drinking water) applied inside and outside, Flanges Drilled as per IS 1538.Nut-Bolt confirming to IS:1363 and IS: 1367/ CS/ galvanised steel.Insersion rubber of black EPDM 6mm thick . Suitable support structure as per directions of EIC. Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work. BI01010001010000000000000515BI0100001162

48 Manually Operated CI Sluice valve of Class PN-1.0 BI01010001010000000000000515BI0100001163

49 80 mm HW BI01010001010000000000000515BI0100001164 1 Each 6301 Excess(+) Full Conversion INR

50 100 mm HW BI01010001010000000000000515BI0100001165 1 Each 8649 Excess(+) Full Conversion INR

51 125 mm HW BI01010001010000000000000515BI0100001166 1 Each 11173 Excess(+) Full Conversion INR

52 150 mm HW BI01010001010000000000000515BI0100001167 1 Each 13595 Excess(+) Full Conversion INR

53 200 mm HW BI01010001010000000000000515BI0100001168 1 Each 22603 Excess(+) Full Conversion INR

54 Horizontal directional drilling (by trenchless technology) of suitable dia hole minimum 1.0 mtr below natural ground level in all type of soil under CC/BT roads and pulling HDPE pipes of dia up to 110 mm, which are available in the form of a coil including excavation, shoring/ strutting, preparation, maintain the thrust and including, road dismantling,excavation and refilling of drive pit and exit pit, restoration of road cut as per technical specification and scope of work. Excluding cost of pipe line. Note: Trenchless laying shall be done only for laying of pipe line (rising main) and road crossing of distribution pipe line under CC/BT roads. BI01010001010000000000000515BI0100001178 1 RMT 289 Excess(+) Full Conversion INR

55 Providing, lowering, laying, aligning, fixing in position at all level/depths CI Class - B specials as per IS : 1538, amended up to date in trenches complete including all material, labour, testing and commissioning along with pipe line/ appurtenance as per Technica Specifications and as per direction of Engineer. Note : E/wto be measured and paid separately. BI01010001010000000000000515BI0100001188

56 Plain ended Cl specials including tail piece, spigot end and socket end. BI01010001010000000000000515BI0100001189

57 Up to 300 mm dia BI01010001010000000000000515BI0100001190 1 Kg Excess(+) Full Conversion INR

58 Double flanged CI pipe fittings. BI01010001010000000000000515BI0100001191

59 Up to 300 mm dia BI01010001010000000000000515BI0100001192 1 Kg Excess(+) Full Conversion INR

60 Providing and fixing of flanged/ plain ended MS Specials made from MS sheet strips of relevant IS specification of approved thickness by welding, lowering, laying, aligning, fixing in position at all level/ depths in trenches complete including all taxes, material, labour, inside lining, outside coating, testing and commissioning along with pipe line as per technical specifications and direction of Engineerin- charge. BI01010001010000000000000515BI0100001188

61 MS pipe specials up to 600mm dia (with minimum 5mm thickness sheet) BI01010001010000000000000515BI0100001192 1 Kg Excess(+) Full Conversion INR

62 De-jointing and removing of already laid CI/DI pipes of following diameters in excavated trenches with care, without damaging pipes, CID joints, valves, specials etc. and other materials and then refilling of soil after de-laying and de-jointing of pipelines with proper compaction and disposing of all surplus soil as directed with in a lead of 30 mtr. This also include stacking the pipes with care and transporting the same to div./sub div. store or as directed by EIC with in the division. (Rates are Exclusive of Earth Work) BI01010001010000000000000515BI0100001193

63 80 mm BI01010001010000000000000515BI0100001194 1 RMT Excess(+) Full Conversion INR

64 100 mm BI01010001010000000000000515BI0100001195 1 RMT Excess(+) Full Conversion INR

65 125 mm BI01010001010000000000000515BI0100001196 1 RMT Excess(+) Full Conversion INR

66 150 mm BI01010001010000000000000515BI0100001197 1 RMT Excess(+) Full Conversion INR

67 200 mm BI01010001010000000000000515BI0100001197 1 RMT Excess(+) Full Conversion INR

68 Laying, Jointing, Testing and Commissioning of Ductile Iron (DI) Pipes of any class in assorted length with specials, valves etc. including local handling and transportation from PHED store and then refilling of soil with proper compaction and disposing of all surplus soil as directed with in a lead of 30 mtr as per satisfaction of EIC. (Rates are Exclusive of Earth Work and jointing materials) BI01010001010000000000000515BI0100001198

69 80 mm BI01010001010000000000000515BI0100001199 1 RMT Excess(+) Full Conversion INR

70 100 mm BI01010001010000000000000515BI0100001200 1 RMT Excess(+) Full Conversion INR

71 125 mm BI01010001010000000000000515BI0100001201 1 RMT Excess(+) Full Conversion INR

72 150 mm BI01010001010000000000000515BI0100001202 1 RMT Excess(+) Full Conversion INR

73 200 mm BI01010001010000000000000515BI0100001257 0.0 RMT Excess(+) Full Conversion INR

74 Providing Household Tap Connection as per technical specification and approved drawing as per relevant IS code (amended up to date) from uPVC/DI/AC/MS/GI pipe line up to consumer meter/premises by using PVC/MS saddle piece (Complete job).This job includes digging out suitable size of pits and trench for laying service line in all kinds of soil (excluding road); depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 100 meter ; providing & fixing of all fitting duly approved in accordance with specification for potable water including MS/PVC saddle piece, gunmetal ferrule 4.0 mm , GM Full-way Valve (IS:778 Mark) or wheel valve and specials, below ground level 20 mm nominal dia MDPE pipe PE 80 PN 16 as per ISO 4427 / 20 mm nominal dia PPR-C (Three layered) pipe PN16 SDR 7.4 (IS:15801:2008) (ISI mark) and above ground level using 20 mm dia PPR-C pipe with standard PPR fittings/ 15 mm dia GI pipe with fittings in the premises for fixing a tap / meter box (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . The service line should be laid at least 45 cm below ground level. Note: Road cut and restoration is not part of this item and paid separately.

75 For connection with 20 mm dia MDPE/PPR-C pipe length up to 05 mtr. 0.0 Each Excess(+) Full Conversion INR

76 Providing Household Tap Connection as per technical specification and approved drawing and as per relevant IS code (amended up to date) from HDPE pipe line up to consumer meter/premises by using electro fusion saddle piece (Complete job).This job includes digging out suitable size of pits and trench for laying service line in all kinds of soil; depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 100 meter ; providing & fixing of all fitting duly approved in accordance with specification for potable water including electrofusion saddle piece, gunmetal ferrule 4.0 mm , GM Full-way Valve (IS:778 Mark) or wheel valve and specials, below ground level 20 mm nominal dia MDPE pipe PE 80 PN 16 as per ISO 4427 / 20 mm nominal dia PPR-C (Three layered) pipe PN16 SDR 7.4 (IS:15801:2008) (ISI mark) for and above ground level using 20 mm dia PPR-C pipe with standard PPR fittings/ 15 mm dia GI pipes with fittings in the premises for fixing a tap / meter box (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . The service line should be laid at least 45 cm below ground level. Note: Road cut and restoration is not part of this item and paid separately.

77 For connection with 20 mm dia MDPE/PPR-C pipe length up to 05 mtr. 0.0 Each Excess(+) Full Conversion INR

78 Providing Household Tap Connection as per technical specification and approved drawing as per relevant IS code (amended up to date) from HDPE/uPVC/DI/AC/MS/GI pipe line up to consumer meter/premises by using PP mechanical Integrated saddle with inbuilt flow control valve made out of SS316 designed for 5 LPM discharge at 0.5 bar pressure , not exceeding the flow of 7 LPM at 2 bar and a compression elbow, moulded in single piece (Complete job) including digging out suitable size of pits and trench for laying service line in all kinds of soil; depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 100 meter ; providing & fixing of all fitting duly approved in accordance with specification for potable water including GM Full-way Valve (IS:778 Mark) or wheel valve and specials with 20 mm nominal dia MDPE pipe PE 80 PN 16 as per ISO 4427 / 20 mm nominal dia PPR-C (Three layered) pipe PN16 SDR 7.4 (IS:15801:2008) (ISI mark) and above ground level using PPR-C pipe with standard PPR fittings/ GI pipes in the premises for fixing a tap / meter box (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . The service line should be laid at least 45 cm below ground level. Note: Road cut and restoration is not part of this item and paid separately.

79 For connection with 20 mm dia MDPE/PPR-C pipe length up to 05 mtr. 0.0 Each Excess(+) Full Conversion INR

80 P & F Bib cock (IS : 8931 mark), superior quality of approved make , brass 400 gm, 15 mm nominal bore. 0.0 Each Excess(+) Full Conversion INR

81 P & F Bib cock (IS : 8931 mark), superior quality of approved make, chrome plated with complete brass body including brass handle with wt. 300 to 325 gm.15 mm nominal bore. 0.0 Each Excess(+) Full Conversion INR

82 Road cutting for house hold service connection in minimum trench width wherever road crossing is required. Road cutting of cement concrete,WBM, Black top etc. of all thickness shall be done by using a concrete cutter machine keeping minimum trench width and restoration of the road with Cement concrete with PCC M-10 and CC M-30 grade as per specification and direction of Engineer in charge.. 0.0 Mtr Excess(+) Full Conversion INR

83 Add extra over item no 1.21, 1.22 & 1.23 for providing 20 mm PE 80 PN 16 as per ISO 4427 MDPE pipe including excavation, providing, laying & jointing of service line above 5.00 mtr. 0.0 Mtr Excess(+) Full Conversion INR

84 Add extra over item no 1.21, 1.22 & 1.23 for providing 20 mm ISI marked PN16 SDR 7.4 (IS:15801:2008) PPR-C (Three layered) pipe including excavation, providing, laying & jointing of service line above 5.00 mtr. 0.0 Mtr Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures Select

Please Enable Macros to View BoQ information