Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.3 LRejected-Finance | L1 | Rejected-Finance The Tender is rejected by the competent authority. |
Tender Value
₹6.0 L
EMD Value
₹11,949
Closing Date
30 May 2023, 4:00 pmClosed
Executive Engineer ( Electrical)
O/o The Executive Engineer ( Electrical) 1ST Floor, Bhopal House, Lalbagh Lucknow
Maintenance of Electrical installation at the Office of CGMT, BSNL, UP East Circle Office , Lucknow
2023_BSNL_154534_1
25/TEDL/BSNL/2022-2023 Dated 26/12/2022
Open Tender
Electrical Works
Item Rate
365 days
LUCKNOW
Please refer Tender documents.
2 documents required · 2 mandatory
₹590
ACCOUNTS OFFICER, BSNL
₹11,949
25 Jul 2023
18 May 2023
31 May 2023
18 May 2023
30 May 2023
18 May 2023
Rectification of electrical faults/complaints of Electrical installations & Fans by deploying one no. skilled man power for full day during the office hours as per the detailed specifications etc as reqd. ( Note: Materials are not included in this item)
S/Fixing of following accessories in the existing light fitting i/c connection etc. as required.(Make:Philips or SS make.) (a). 4/2 ft, 36/20 watt flourescent tube light
(b). Starter for 20 watt/36 watt fittings.
©. 11 watt CFL Lamp pin type
(d). 15 watt coloured incandescent lamp
(e). 7 watt LED Lamp
S/F of following size power strip for operation on 230V 50 HZ AC supply on surface i/c connection etc. complete as required. (a). 4 way 5 Amp power strip
S/F of following electrical items in the building as required by the officers etc. as required. (a) Electric Bell (Ding Dong)
(b). Three Core 40/76 copper wire
©. Two Core 23/76 copper wire.
(d). 5A switch/ bell push / pendent switch
(e). 3 pin 5A plug top
(f). 15 A switch
(g). 5 A 3 pin socket
(h). 15 A 6 pin socket
(i). 15 A 3 pin plug top
(j). 3/4 way gang box
(k). Switch board sheet
(l).Drawing of 1.5 Sq.mm copper wire in existing conduit
(m). 15 A 5 pin Combind Box
(n). Call bell with Remote
(o). Drawing of 2x4.0 Sq.mm copper wire in existing conduit
(p). 6 to 32 A SPMCB
(q). 2.0/2.25/2.5 µfd condensor
(r). 4.5 µfd condensor
(s). Fan regulator electronic
(t). 36/40/11 W Elecronic Ballast
(u). Side Holder
(v). 40 Amp DP isolator
Rewinding & Repairing of ceiling fan / wall mounted fan / 300 mm Ex. fan 230 volt 50 hz AC supply & replacement of bush bearing, insulation , papering connection & testing etc as reqd
Rewinding & Repairing of Exhaust fan 450 mm 230 volt 50 hz AC supply & replacement of bush bearing, insulation , papering connection & testing etc as reqd
S/F of PVC casing caping of following size etc. complete as required. (a). 20 mm X 10 mm
(b). 25 mm X 10 mm
Repairing of room heater 230 volt 50 hz AC supply 1000 Watt i/c 1000 w heating rod element,connector patti, with top & connection testing, cleaning etc complete as reqd.
Supply and replacement of heat reflector sheet in exsiting defective room heater i/c cleaning testing as reqd.
Repairing of 4 KVA AVR 230 volt 50 HZ AC supply i/c relay, PVC plate & replacement of push button connection testing cleaning etc complete as reqd
SITC of ceiling fan complete with blades i/c S/F of down rod of length (Upto 30cm) alongwith its wiring with 1.5 sqmm FR PVC insulated copper conductor single core cable etc. as required.
SITC of 4'-20 watt LED fitiing complete directly on ceiling/wall i/c connection with 1.5 sq. mm copper conductor single core cable etc. as reqd.
SITC of 400mm sweep three speed oscilating type wall mounting fans 230 Volt 50 Hz AC supply on existing wall i/c connection etc as reqd.(M/S Usha/ Bajaj/Crompton./ SS make)
SITC of 300mm sweep Fresh air fans 230 Volt 50 Hz AC supply on existing wall i/c connection etc as reqd.(M/S Bajaj/Crompton./ SS make)
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). (a) 8 Way SPN DB Double door
Supplying and fixing extra down rod of 10 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as required. (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)
SITC of 2'x2' size-36 watt LED fitiing complete on false ceiling i/c connection with 1.5 sq. mm copper conductor single core cable etc. as reqd. (Make,Havells or SS)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .