Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹9.4 L
EMD Value
₹18,879
Closing Date
12 Sept 2025, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Aerospace Division, Bangalore
HINDUSTAN AERONAUTICS LIMITED Bangalore Complex Aerospace Division
Lighting and Electrical Wiring work in Model Room Gaganyan Store Phase II Cold Storage I and II 4 Locations at Aerospace Division HAL BC
22336
HAL/ASD/NIT-340/25-26
IMM
Bangalore Complex - Aerospace Division
₹0
₹18,879
12 Sept 2025
28 Aug 2025
28 Aug 2025
12 Sept 2025
Name of the Individual / Firm / Company: * Mandatory
Type of ownership
Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,
Address for correspondence:
PAN No.:
Contact details
Please Enter Contact person Name
Pls Enter Mobile No
Cost of tender document (DD no, Date, amount)
Earnest Money Deposit (Number, Date, Amount)
Registered Contractor
Not Enclosed
Average annual financial turn over during the last 3 years, ending 31st March 2024 [ should be at least 30% of the approx. estimated amount put to tender]
TURN OVER IN Rs.
Enclosed
Enclosed
Enclosed
ESI & PF Nos with proof
Related Document to be Uploaded to eProcurement Portal
Bank(s) details: [Copy of the cheque leaf to be uploaded]
Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)
Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the last date of Tender submission.(solvency required will be 40% of the approx. estimated amount put to tender)
Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs
Electrical license
Experience of having successfully completed similar works during last 7 years ending last day of June-2025. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the approx. estimated amount put to tender. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the approx. estimated amount put to tender. (iii) ONE similar completed work costing not less than the amount equal to 80% of the approx. estimated amount put to tender.
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Please enter Details for Work No 1
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Pls Enter Details for Work No II
work done
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Pls Enter Details for Work No III
Details of person holding the power of Attorney (If different from contact person)
Related Document to be Uploaded to eProcurement Portal
Pls Enter Details for Person holding Power of Attorney
DECLARATION I
DECLARATION II
Pls Accept the Delaration II
HAL/ASD/NIT-340/25-26 HAL/ASD/R-340/25-26
Lighting & Electrical Wiring work in Model Room, Gaganyan Store Phase II, Cold Storage I&II (4 Location) at Aerospace Division HAL (BC)
Specification
Supply, installation, testing and commissioning of 120W LED Highbay Light
Supply, installation, testing and commissioning of 70 watts Building lights on existing wall including connecting box with connectors.
Supply, installation, testing and commissioning of 36 watts Panel Light Fitting (2x2) on existing false ceiling.
Supply, fixing, testing & commissioning of the following factory built powder coated Double door MCB/MCCB DB of any approved make fabricated out of M.S. sheet steel enclosure & necessary cutouts for operating the MCB knobs & comprising of suitable rating tinned copper busbars & earthing bus with tapped holes including internal wiring with stranded copper PVC wires or suitable size copper strips etc. & fixing the DB in flush with wall/ on wall as per site requirement with necessary M.S. angle supports, chipping the wall and replastering to smooth finish etc., wherever required as per site condition, complete in all respects, as directed by Engineer-in-charge and comprising the following as detailed below:
4 way HTPN MCB DB
MCCBs, MCBs & RCBO
Supply, installation, testing and commissioning of 5A to 32A SP MCB 10kA , C Curve in the exisitng DB/powder coated enclosure
Supply, laying, testing & commissioning of following size Aluminium LT armoured power cables in the existing masonary open duct.
Supply of 3.5 CX 25 Sqmm Aluminium armoured conductor.
Laying, Testing & Commissioning of above (Upto 35 sq.mm) in the existing masonary open duct.
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE armoured aluminium conductor cable of 1.1 KV grade as required
3.5C X 25 sq. mm Al Arm cable
Wiring for circuit/submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
3 x 2.5 sq. mm (lighitng & exhaust fans)
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
20MM PVC Conduit
Earthing
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.
Civil Works : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan). Including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil & refilling the same soil and disposal of surplus excavated soil as directed, with in a lead of 50m.
Excavation All kinds of soil
Refilling of same soil
The tenderer shall quote the rates inclusive of GST and all other taxes, duties, levies, fees and charges or any other imposition by the Central / State Government or any statutory authorities of whatever nature. All other costs including loading, un-loading, Insurance, transportation, testing, Certification expenses. L1 (lowest quote) will be determined based on the total quoted amount inclusive of all taxes and other charges as mentioned above.
Payment will be subject to terms and conditions in the tender document
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
NoticeInvitingTenderNIT340.pdf
TENDER_DOCUMENT • 0.86 MB
PQNIT340VendorToViewOnly.pdf
TENDER_DOCUMENT • 0.20 MB
PQNIT340VendorToUpload.xlsm
TENDER_DOCUMENT • 0.02 MB
PricebidNIT340VENDORTOUPLOAD.xlsm
TENDER_DOCUMENT • 0.03 MB
TenderDocumentNIT340.docx
TENDER_DOCUMENT • 0.32 MB
PriceBidNIT340VendorToViewOnly.pdf
TENDER_DOCUMENT • 0.45 MB
AnnexuresforNIT340.pdf
TENDER_DOCUMENT • 0.12 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .