CERTAIN B/R REPAIR/MAINT TO OTM ACCN TO CERTAIN UNITS AT SANYAT LINE, SUMERIAN LINE, PARADE ROAD, RPSO COMPLEX AND OFFRS MESS IN THE AOR OF AGE B/R-I UNDER GE (EAST) DELHI CANTT-10

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 Sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but n.exc 4 sqm each complete all as specified and directed.

Taking down shutters of any description not exceeding 2.00 Sqm each complete all specified and directed.

Taking down shutters of any description exceeding 2.00 Sqm each complete all specified and directed.

Refixing doors shutters in same opening any description n exc 2.0 sqm. complete all specified and directed.

Refixing doors shutters in same opening any description exc 2.0 sqm. complete all specified and directed.

S & F in repair 1.00 mm thick Steel rolling shutters, with ball bearing, as specified including top cover, an choring rod, hasp and staple and erected in position as indi cated, complete: push pull or manual type

S & F in repair 1.00 mm thick Steel rolling shutters, with ball bearing, as specified including top cover, an choring rod, hasp and staple and erected in position as indi cated, complete: gear operated type with bevel gear box and crank handle

Resecuring or erasing and adjusting of steel rolling shutter any type with grease/oiling and welding as required and fixing loose portion of shutter etc of any description n. exc 10 sqm each shutters etc

Resecuring or erasing and adjusting of steel rolling shutter any type with grease/oiling and welding as required and fixing loose portion of shutter etc of any description exc 10 sqm and not exc 20 sqm each shutters etc

S & F framed work such as in door frame, door shutters / gate of angel or other section with gusset plates, rails, braces, etc complete , drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hings or steel hanging door fittings, including hings hold fast of Fe 410-W (Gde E-250 quality) etc complete all as specified.

S&F flush door shutter 35mm thick solid core construction with Block board and both faces covered with decorative face veneer with lipping/ frame to match etc complete all as specified and as directed.

S&F flush door shutter 35mm thick solid core construction with Block board and plywood face panels, commercial type on both sides. complete all as specified and as directed.

S&F 35 mm thick second class hard wood glazed and skelton shutters open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part -I section 8 clause 8.24 (a) supplied and fitted to chowkats

Supply and fixing factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door up to 2.50 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws,etc. profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in-Charge. (Glass/ wire mess shall be paid separately) Note: The unit rate quoted by contractor include all other connected accessories. Net Opening will be measured lor payment purpose and for uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.5 m height made of (big series) frame 112 x 52 mm & sash 42 x 66 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.00 Sqm to 2.50 Sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.20 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh hall be paid separately). (Note: The unit rate quoted by contractor include all other connected accessories. Net Opening will be measured lor payment purpose and for uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.)

Providing and fixing factory made uPVC white colour frame 60 mm x 58 mm for fixed glass window/ opennings etc , made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware, EPDM gasket, 1.2+ 0.2.mm thick galvanized steel profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, including glazing bead 35 mm x 20 mm all, including fixing with three track three panel door also etc as complete and as directed,( Note :- Glass shall be paid separately).

S & F anodised aluminium frame for doors, windows, ventilators / AC provision window frame with or without three track window provision etc with Powder Coating (minimum thickness of powder coating 50 micron) with one or more rebates including joining cleat for fixing etc. complete all as specified

S & F Anodised aluminium door shutters, powder coating of any colour, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws, including Glass / wiremesh/ partical board/ ACP board etc complete all as specified

S & F Anodised aluminium window and ventilator shutters, powder coating of any colour, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified (Note : Glass / wiremesh etc any type paid separately)

S & F Aluminium alloy powder coated windows Three track three panels sliding window with fly proof S.S wire mesh shutter (Two nos. glazed & one no. wire mesh panels) including aluminum powder coated frames sliding track, bottom , sides and top weight not less than 0.75 Kg/ RM, double revated and 0.40 Kg/RM for window shutter sliding type with aluminium sections as per series - B (18mm) 3 track of Jindal section and equivalent in others, numbers for sliding windwos with framed shutter including aluminium allow powder coated snap type beads handles with locking arrangement spring action and glazing clip joint cleats rubber gaskets etc including all standard fittings, complete all as specified and as directed. (Note : Glass / wiremesh etc any type paid separately)

M & L for Box type steel window 1.25mm thick made of ERW tube P-Section of size 60x25mm double rebated outer frame comprise of glazed skeleton of gauzed skelton shutter (two gauged shutters and two glazed shutter) of ERW tube P-Section size 50x20mm and 1 mm thick one/two Nos openable leaf consisting of two Nos shshbar of T-Section 20x3mm welded to frame with one No vertical mullion of ERW box type T-Section of size 60 x 25mm and 1.25mm thick and FI 2mm thick welded/screwed to frame for fixing of glass incl fittings and fixture like Handle, Tower Bolt, Stopper, Cleat, Pintal hinges, hold fast etc (a) holdfast 150mm long of 120mmx3mm made to shape 04 Nos per window (b) handle of Z section 20mmx25mm,100mm long 1 Nos per leaf (c) MS Tower 150mm long 2 Nos per lead (d) Z section 20mmx25mm, 100mm long stopper 1 No perleaf (e) cleat 55mm long of hallow square 15mmx20mmx63mm welded to hinge 1 No per leaf (f) MS pinton hinges of size 75mmx12mm 2 Nos per leaf

Supply & fixing 8 mm thick Toughned glass fixed as in doors, windows, partitions and similar work including cutting to shape, drilling holes required icluding frosted on one side etc complete all as specified and directed

S & F in reapir for 10 mm thick (toughened glass with frosted glass) of approved quality fixed in partation/door's/ Cubical for toilets etc including necessary all stainless steel hardware fittings (As like frame , brackets , clits , jammers, stopers, handels etc) complete drilled for fixing with all fitting and fixture including dismantled old glass any type complete all as specified and directed

Hacking out old broken glass from wooden frames and steel frame or stone, concrete or brick surrounds , glazed with putty or fixed with beads.

S & F 3 mm thick sheet glass , ordinary quality and glazed with oil putty in square n. exc 0.5 Sqm in each pane fixed complete all as specified and directed.

S & F 3 mm thick figured glass , pin head type and glazed with oil putty in square n. exc 0.5 Sqm in each pane fixed complete all as specified and directed.

S & F 5 mm thick sheet glass , ordinary quality and glazed with oil putty in square n. exc 1 Sqm in each pane fixed complete all as specified and directed.

S & F stainless steel wire cloth 0.36mm normal dia of wire and average with a apparture 1.40mm and fixed with tinned tacksor stainless steel wire staples as specified and directed.

S & F in repair stainless steel wire cloth 0.36mm normal dia of wire and average with a apparture 1.40mm and fixed with tinned tacksor stainless steel wire staples as specified and directed.

S & F solid PVC door frame of size 50 mm x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S & F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing. complete all as specified and directed by Engr-in-Charge..

S & F 250 mm long Stainless steel bright polished sliding door bolts, plate type, stove with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed to door complete all as specified and as directed

S & F 150 mm size Stainless steel bright polished barrel tower bolts,for doors with bright bolt

S & F for Fancy type Stainless steel bright polished handles oval type of size 150mm size, complete all as specified and as directed.

S & F 100mm size butt hinges stainless steel complete all as specified and as directed.

S&F mild steel butt hinges medium weight cold rolled of size 100 mm and fixed to shutters. complete all as specified and as directed.

S & F 150 mm size aluminium anodised, handles cast type anodised complete all as specified and directed

S & F 150 mm size aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S & F 250 mm long aluminium alloy, anodised siding door bolts, with has[, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminiums alloy and fixed

S&F in repair 300 mm size mild steel ordinary rat & rail rod pattern spring (Helical) including rollar & rollar plate fixed to wooden / MS frame complete all specified and directed.

S & F in repair aluminium dia cast door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed

S & F in repair cast iron body aluminium finished with box , double action floor door closer/spring for heavy duty door of aluminium/wooden/toughened glass etc all as specified and directed.

S & F in repairs stainless steel Curtain Rod 25 mm dia with holders fixed to wall with finials and bracket etc complete all as specified and as directed.

M&L Framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work .

S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in- charge. etc complete all as directed.

Providing and fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) with semi perforated 12mm thick micro tegular edged false ceiling tiles of size 595 x 595mm of approved texture, design and pattern having moisture content less than 2%, humidity resistance of 90%, NRCO 0.50 to 0.75 as per IS 8225:1987, Nocumbustible as per BS 476 (Part-4) -1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspende on interlocking metal T Grid of hot dipped galvanised iron section of 0.33mm thick (Galvanised @ 120 Grams per sqm including both side) comprising of main T runners of size 15 x 32mm length 3000mm, cross T of size 15 x 32mm length 1200mm and secondary intermediate cross -T of size 15 x 32mm of length 600mm to form grid module of size 600 x 600mm, suspended from ceiling using galvanised mild steel items (galvanising @ 80 grams per sqm) i.e. 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L shape lever adjuster of soze 85x25x2mm, Galvanised iron parimeter wall angle of soze 24 x 24 x 0.40mm of length 3000mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws including dismantling of old existing ceiling complete. The work shall be carried out as per sepcifications, drawing and as per direction of Engineer-in-Charge. (Make: DIAMOND/ GYPROC/ USG BORAL/ KNAUF/ ARMSTRONG)

M&L PVC hollow wall panelling 7 to 8 mm thick wood grain teak finished (colour and design as approved by GE) prelaminated inclusive of fixing on to wall including moulding end caps with L / U beading etc fixed with PVC sleeves and screws as required at site including dismantling of old wall panelling of any description, complete all as specified and as directed. Note : (i) Taking down existing any type of electric board sheet/ tube light/ LED / any fittings before fixing of panels and refixing the same after fixing the panels as required are included in the quoted rates by the contractor.

M&L WPC decorative wall panels/louvers 15 to 25 mm thick design patern wood grain teak finished (colour and design as approved by GE) prelaminated inclusive of fixing on to wall including moulding end caps with L / U beading etc fixed with PVC sleeves and screws as required at site including dismantling of old wall panelling of any description, complete all as specified and as directed. Note : (i) Taking down existing any type of electric board sheet/ tube light/ LED / any fittings before fixing of panels and refixing the same after fixing the panels as required are included in the quoted rates by the contractor.

M & L for Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 and including demolition of old brick/ PCC block masonry complete all as specified and directed.

Taking down cement or cement lime plaster of any description on brick or stone walls and concrete surface of ceiling etc including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and fair complete all as specified and directed by Engr-in-Charge.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and fair complete all as specified and directed by Engr-in-Charge.

M & L Rendering 5 mm thick on fair faces of concrete or concrete surface in ceiling in CM 1:3, finished even and fair complete all as specified and directed by Engr -in Charge.

M&L for dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off from premises complete all as specified and directed

Demolition of cement concrete (unreinforced) in ground floor or in any position and paving not exc. 15 cm thick (below or above ground level) complete all as specified and as directed.

M & L 25 mm Thick PCC type B-0 1:2:4 (12.5mm graded aggregate) as in flooring, under Tiles and etc including demolition old existing any type PCC etc all as specified and directed

M & L 75 mm Thick PCC type B-0 1:4:8 (12.5mm graded aggregate) as in sub base, under Tiles and etc all as specified and directed

M & L Vitrified ceramic tiles (double charge) size 600 x 600 x 8 -10mm thick (square/rectangular), ( shade/ colour/ Design/ pattern as approved by GE) ,as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over 15 mm thick avg screed bed in CM 1:6 in floor complete all as specified and dirtected by Engr-in-Charge

M & L Vitrified ceramic tiles (double charge) size 600 x 600 x 8 -10mm thick (square/rectangular), ( shade/ colour/ Design/ pattern as approved by GE) ,as in skirting , dado , vertical surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over and including 10 mm thick rendering in CM 1:4 etc complete all as specified and dirtected by Engr-in-Charge

M & L Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) size 395 x 395 mm / 400 x 400 mm , in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match laid over and including 15 mm thick avg screed bed in CM 1:6 etc complete all as specified and dirtected by Engr-in-Charge

M & L Coloured Glazed ceramic tiles size 600 x 300 x 7-8 mm thick, in vertical surface such as skirting, dados , etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match and over and including 10 mm thick rendering in CM 1:4 etc complete all as specified and dirtected by Engr-in-Charge

M&L for vitrified Ceramic tiles, double charged, 8 to 10 mm thick ( shade/ colour/ Design/ pattern as approved by GE) polished /matt finished size 600mm X 1200mm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete over and including 15mm thick rendering in cement mortar (1:6) etc complete all as specified and dirtected by Engr-in-Charge

M&L for vitrified Ceramic tiles, double charged, 8 to 10 mm thick (shade/ colour/ Design/ pattern as approved by GE) polished /matt finished size 600mm X 1200mm as in skirting/dado/vertical surface etc laid on 10mm thick cement plaster in CM (1:4), set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade of tiles etc complete all as specified and dirtected by Engr-in-Charge.

M & L for OUT DOOR coloured ceramic chequered tiles / parking tile 8 to 9 mm thick (square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 etc complete all as specified and dirtected by Engr-in-Charge

M & L 75 mm thick Cement concrete work as in plinth protection type C-1 , 1:3:6 (20mm graded aggregates) with finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed

M & L for 18 to 20 mm thick granite (of any type) work( table rubbed and polished) in jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab over and including 10 mm thick screed bed/rendering in CM 1:4 including rounding to edge of granite as per required and after dismantling of existing granite of any description including cement mortar bedding (but not backing ) and rubbish off the premises complete all as specified and directed.

S & F Rotational moulded polyethylene water storage tanks 500 lts capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable overhead tank of any description complete.

S & F Rotational moulded polyethylene water storage tanks 1000 lts capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable overhead tank of any description complete.

S & F in repair 20 mm bore Gun metal, globe or gate valves, with iron wheel head / leaver arm, screwed both ends for iron pipe and fixed

Refixing old steel water tubing galvanised 15mm bore fixed to walls, under floors and on ceiling surfaces and including taking up or down steel tubing 15 mm bore and connecetions, including cleaning for refixing etc complete all as specified and directed.

Refixing old steel water tubing galvanised 20 mm bore fixed to walls, under floors and on ceiling surfaces and including taking up or down steel tubing 20 mm bore and connecetions, including cleaning for refixing etc complete all as specified and directed.

S&F steel water tubing galvanised 15mm bore medium grade fixed to walls, under floors and on ceiling surfaces , including cutting chases , pipning in making good to facings where required and pointing in Cement mortar 1:3 for concealed water tubing or conduit pipe etc and including taking up or down old steel tubing 15 mm bore and connecetions in any postion etc complete all as specified and directed.

S&F steel water tubing galvanised 20 mm bore medium grade fixed to walls, under floors and on ceiling surfaces and including taking up or down old steel tubing 20 mm bore and connecetions in any postion etc complete all as specified and directed.

S&F in repair 15mm quarter turn brass angle valves, chromium plated cast copper alloy, polished body screwed down, high pressure,suitable for 15mm bore steel tubing complete all as specified & directed.

S & F in repair 15 mm bore bib tap (long body) ,fancy type chromimum plated screwed down high pressure with crutch/ butterfly handle/quarter turn handle etc suitable for 15mm bore steel tubing complete all as specifed and directed.

S & F in repair 15 mm bore bib tap chromimum plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions etc complete all as specifed and directed.

S&F in repair 15 mm bore Fancy type pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed. complete all as specifed and directed.

S&F in repair 15 mm concealed stop valves with long shank and cup chromimum plated fancy type for iron pipe and fixed etc complete all as specified & directed.

S&F in repair 15mm Urinal Valve Auto Closing System with Built-in Control Cock & Wall Flange screwed both ends for iron pipe or for unions for 15mm bore steel tubing complete all as specified & directed. Make : Jaqaur Cat Part No. PRS-CHR-077 and equivalent in Hindware/ Parryware/ Kohlar.

S&F in repair Brass CP Basin mixer central hole for making hot and cold water fixed as per manufacturers manual with long shunk and cup washers, screwed both ends suitable for 15mm bore GI Pipe joints to GI pipes or unions, complete all as specified and directed. (Make : Jaquar Continental CON-CHR-167KNB or equivalent in Marc / Kohler)

S & F in reapir CP shower rose fancy type 150 mm x 150mm size with 300 / 600 mm long shower arm, fixed in repair to 15mm bore pipe, complete all as specified and as directed.

S & F in repair PVC connections 15mm size with PTMT nuts of length 450mm.

S & F in repair PVC connections 15mm size with PTMT nuts of length 600 mm. (Make: Jaquar/ Marc/ Kohler)

S & F in repair Designer type high quality fancy type looking mirror of size as approved by Engr-in-Charge 8-10mm thick, fixed to wall with stainless steel studs, screws, brackets and washers etc complete all as specified and as directed.

S&F in repairs Hand Shower (Health Faucet) with 8 mm Dia, 1 Meter Long Flexible Tube & Wall Hook completed all as specified Make : Jaquar Cat part No. ALD-CHR-573 (Make : Jaquar cat part No HSH CHR 1657 or equivalent in Marc / Kohler )

S & F in repair Stainless steel Grating dome 100/ 125mm dia with or without hole for waste pipe complete all as specified and as directed.

S & F in repair CP Towel Ring Round with Round Flange fixed in positon with and including chromium plated brass screws and wooden/ plastic cleats, complete all as specified and as directed. (Make: Jaquar/ Marc/ Kohler)

S&F in repairs of CP towel rail 600mm long fixed with and including chromium plated brass screws and and wooden/plastic cleats fixed on walls, complete all as specified. (Make: Jaquar/ Marc/ Kohler)

S & F in reapir Stainless steel CP towel rack of size 600mm x 350 mm , fixed with ss screws complete all as specified and as directe.

S&F in repairs of 32mm brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, unions and cap and fixed, complete all as specified and directed.

S & F 32/40mm spring type PVC waste pipe fixed to WHB and sink (Note minimum length of each pipe should not be less than 0.80RM), fixed in repairs, complete all as specified and as directed.

S&F in repair Vitreous China squatting pan 'Orissa' pattern size 580 x 440 mm white, with integral foot rests with connection to trap , and to flushing pipe antisyphonage pipe including trap set in and including concrete etc complete including making good to floor all as specified and dirtected by Engr-in-Charge .

S & F in repair Vitreous China wash down pedestal pattern EWC, white and including with PVC (SWR) ' S' Trap / 'P" Trap , including seat cover with connection to drain and to flushing pipe antisyphonage pipe, and making good to floor complete all as specified and directed.

S & F in repairs Vitreous china Rimless Bowl With Cistern For Extended Wall Hung WC With PP Soft Close Seat Cover, Hinges, Dual Flush Cistern Fitting, Accessories Set, Size: 380x650x730 mm including connecetion to drain pipe with all fitting and fixture complete all as specified and as directed. Make & Cat Part : Jaquar-Cat No.FLS-WHT-5353PPZ or equivalent in Marc / Kohler )

S & F in repairs Vitreous china single Piece floor mounted WC With PP Soft Close Seat Cover, Hinges, with cistern & Dual Flush Cistern Fitting, Fixing Accessories and Accessories Set, Size: 360x730x740 mm, S Trap- 300 mm including connecetion to drain pipe with all fitting and fixture complete all as specified and as directed. Make & Cat Part : Jaquar-Cat No. SLS-WHT-6851S300PP or equivalent in Marc / Kohler )

S & F in reapir Vitreous china Table Top wash hand basin Size: 520x360x 125 mm With Fixing Accessories etc and including chromium plated brass waste coupling etc complete all as specified and as directed. (Make : Jaquar Cat part No. FLS-WHT-5931 or equivalent in Marc / Kohler)

S&F in reapir Vitreous China wash basin, white, flat back, size 550 x 400 mm including , chain and plug but including brackets or erecting stand including & (32 mm -45 gms/40mm-60 gms ) waste coupling of CP complete all as specified and dirtected by Engr-in-Charge .

S & F in reapir Vitreous china wash basin counter oval type size 600x425x195mm, under granite slab with all fitting and fixture complete all as specified and as directed. (Make : Jaquar / Hindware/Parryware/cera)

S & F in repair full pedestal pattern wash hand basin with pedestal , size of basin 58 × 43.5 × 82.5 cm as approved by GE including brakets , chromium plated brass waste coupling , waste pipe etc complete all as specified and as directed. Make : Hindware Tango Full Pedestal Wash Basin Cat part No. 10086 and equivalent in jaquar /Parryware or equivalent make as per approved make list)

S & F in repair Vitreous China Urinal, full stall type Urinal With Fixing Accessories, white and fixed complete all as specified and directed. (Make : Jaquar cat part No.URS-WHT-13261 and equivalent in Hindware/Parryware or equivalent make as per approved make list).

S&F in repair 10 Ltrs capacity PVC valveless symphonic action type flushing cistern white low level with inlet, ball valve float handle including bracket & flushing pipe etc complete all as specified and directed

S & F in repair 100 /110 mm dia PVC floor trap , with SS grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4)

S & F in repair 75 mm dia PVC floor trap , with SS grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4)

S & F in repair 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joint laid in trenches or in floor or in wall completed all as specified and directed

S & F repair 110 mm PVC (SWR) bends with acess door completed all as specified and directed

S&F repair 75 mm bore PVC (SWR) pipes single socketed , in any length with rubber ring joints ,laid in trenches or in floor or in wall complete all as specifed and directed.

S & F in repair 75 mm dia PVC cowls

S & F in repair 110 mm dia PVC cowls

S & F repair 75 mm PVC (SWR) bends with acess door completed all as specified and directed

S & F in repairs ready made wall / floor mounted Vanity box with Wash hand basin , base made of HDHMR board, both side laminated and front side melamine surface , Size of Vanity box 22 inch upto 26 inch including Wash hand basin with brass waste coupling. ( Design, colour and patern as approved by GE) Make : Hindware or as approved by GE)

S & F in repairs ready made wall / floor mounted Vanity box with Wash hand basin , base made of HDHMR board, both side laminated and front side melamine surface , Size of Vanity box 32 inch upto 36 inch including Wash hand basin with brass waste coupling. ( Design, colour and patern as approved by GE) Make : Hindware or as approved by GE)

S & F in repair Toilet paper Roll Holder with Stainless Steel Flap, and including chromium plated brass screws and wooden/plastic cleats, complete all as specified and as directed. Make : Jaquar Cat part No. ACN-CHR-1153S and equivalent in Marc/ Kohler).

Dismantling plain / corrugated steel sheeting, any gauge, thickness, including , Nainital or similar pattern roof coverings sheet in any pattern & position of roof coverings.

Dismantling asbestos cement sheet in roof coverings (corrugated, semicorrugated etc) any gauge, thickness, including, Nainital or similar pattern roof coverings sheet in any pattern & position of roof coverings.

S & F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall , fixed with self tapping screws with bent to a curve (of any radius as per required) complete all as specified and directed.

S & F Pre-painted galvatume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour as in ridges hips, vally gutter, drip and straight flashing , fixed with self tapping screws etc complete all as specified and directed

Dismantling structural steel work including , grils , doors, gates,framed work , truss etc., complete all as specified & directed.

Dismantling framed timber scantling in any type of frame , fillets, rails, posts, rafters, purlins, etc complete all as specified.

S&F steel work in tubular trusses, purline, doors , posts, frame works any type etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 complete all as specified and directed

M&L for PCC (1:3:6) type D-2 using 40mm graded stone aggregate as in foundation etc, complete all as specified & directed

M&L two coat of synthetic enamel paint (finishing coat) over one coat of primer to new steel surfaces of any description over 10 cm width or girth incl prepration of surfaces complete all as specified.

M&L for applying Two coat of synthetic enamel paint (finishing coat) over one coat of pink primer to new wood surfaces of any description over 10 cm width or girth incl prepration of surfaces complete all as specified.

M & L for 2 mm avg thickness water proof wall care putty on new / old any type of surface of wall/ ceiling including sand papering thus making surface even & smooth etc and prepare to receive further treatment etc, complete all as specified and directed.

M & L for two coat of white wash applying on and including prepration of any type of old/new surface of walls, pillers, cornices , platered/ unplastered , cement concrete etc complete all as specified and directed.

M & L for two coat of cement base paint applying on and including prepration of any type of old/new surface of walls, pillers, cornices , platered/ unplastered , cement concrete etc complete all as specified and directed.

M & L for two coat of oil bound distemper, using roller brush, including prepration of any type of old/new surface of walls, pillers, cornices , platered/ unplastered , cement concrete etc complete all as specified and directed.

M & L for two coat of weather proof exterior emulsion paint premium quality of approved manufacturer, of required shade and colour , as per manufacturer's specification and using roller brush, applying on and including prepration of any type of old/new surface of walls, pillers, cornices, platered/ unplastered , cement concrete etc complete all as specified and directed.

S&F in repair brass chromium plated wall mixture 3 in 1 system with L- bend provision for over head shower and suitable for 15mm bore GI pipe including three joints to steel pipes or unions and plugging and screwing to walls all as specified and directed. ( Make : Jaquar Continental CON-CHR-273KNUPR or equivalent in Marc / Kohler )

Demolition of cement concrete any description and any position not otherwise specifically provided for complete all as specified and as directed.

M&L for 15mm thick plastering/rendering on brick work on concrete surfaces in cement mortar (1:3) mixed with liquid water proofing compound as per manufaturer's instructions finishing surfaces even and smooth without using extra cement complete all as specified and directed. (liquid water proofing compound shall be measured and paid sepretaely as supply only).

Supply only liquid water proofing compound complete all as specified & directed.

M&L sunkern floor treatment including prepration of concrete/plaster surfaces .and including taking down old treatment with plaster and applying the following treatment complete all as specified and directed by Engr-in Charge . (a) Applying 1st course of bitumenous primer @ 0.4 kg/sqm conforming to IS-3384 over roof concrete surface. (b) Applying 2nd course of a coat of bonding material with blown type bitumen of grade 85/25 heating to working temperature of 180° C and applied @ 1.2 kg/sqm. (c ) Applying 3rd course of APP (Atactic Polypropylene) modified polymeric 3mm thick weight not less than 3.6 kg/sqm with 160 Grams/sqm non woven polyster made at center core reinforced laid with 150 mm on the width side overlap and 100 mm on long side overlap as per manufacturer instructions . The membrane has to be laid with LPG torch and overlap sealed and finished neat (d) Applying 4th course of a coat of bonding material with blown type bitumen of grade 85/25 heating to a working temperature of 180° C and applied @ 1.2 kg/sqm .

M L for PCC 1:5:10 (40 mm graded Aggregate) as in sunken floor, foundation, mass concrete etc all as specified and directed.

S&F plain gypsum board panel 12mm thick on false ceiling (including any design/ cob design as required & pattern as approved by GE) with and including necessary GI frame work for seamless ceiling used with 'T' channel or any section including screws, cleats, fasteners, clips and all required accessories, hangers etc of galvanised steel all as per manufacturer design conforming to IS 2095 and 2542 (1981) the weight of the board shall be not less than 7 Kg per sqm and including dismantling of walls and ceiling existing old board (fibre pulp. insulation etc) or insulatin boards/ slabs/ blanks any thickness including cover fillets etc including two coat of OBD over a coat of putty including dismantling of walls and ceiling existing old board (fibre pulp. insulation etc) or insulation boards/ slabs/ blanks any thickness including cover fillets etc complete all specified and as directed by Engr-in-Charge.

A R construction (BID ID -3102014)

M/S Yamin (BID ID -3098428)

garnet engineers contractors (BID ID -3099651)

M/s Shubh Enterprises (BID ID -3101371)

sunil traders (BID ID -3101923)

Vipul Construction (BID ID -3101763)

M/S Rohit Enterprises (BID ID -3102139)

tarun construction co (BID ID -3100907)