IMPROVMENT TO SMQ (INCL BEDROOM BATHROOM KITCHEN AND TOILET GEYSER EXHAUST FAN LED LIGHT FITTINGS AND FIXURES IN CERTAIN SMQS (PHASE-I) AT SF STATION OJHAR

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed.

Material and labour for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and

Demolition of cement concrete in ground floors and pavings not exceeding 15cm thickness below or above ground level complete all as directed.

Material and labour for non-skid ceramic coloured tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.06 sqm but not exc. 0.11 sqm , laid in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match with over and including cement mortar screed of 15mm thick in CM 1:6 all as specified and directed.

Material and labour for non-skid ceramic coloured tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.11 sqm but not exc. 0.18 sqm , laid in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match with over and including cement mortar screed of 15mm thick in CM 1:6 all as specified and directed.

All as in item No. 5 herein before but as in skirting over 10 mm thick screed bed in CM 1:4

Material and labour for glazed ceramic coloured tiles of size 300 x 450 x 7 mm on vertical surfaces such as skirting, dado etc , set and jointed in neat cement slurry and pointed in white or coloured cement to match with and over and including 10mm thick screed bed in CM 1:4 all as specified and directed.

Material and labour for polished machine cut kota stone slab 20-25 mm thick over 15 mm thick cement screed base in CM 1:6 as in riser of steps, treads etc laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including moulding on edges of steps roughning by making grooves at treads complete all as specified and directed. Note : Kota stone shall be best quality and in one piece shall be provided in treads and raiser and necessary cutting for baluster of railing shall be made. rate shall be deemed in quoted item and nothing shall be paid extra on this account.

Taking up or down old steel tubing including connections of 15mm bore all as specified and as directed and ceiling or laid in floor including cleaning for refixing or removal to store all as directed

All as in item No. 9 herein before but 20 mm bore

Supply and fix 20 mm bore CPVC SDR 11 pipes (concealed including cutting chases and making good in CM 1:4) and plain CPVC SDR 11 fiitings with and including provision of all fittings and fixtures of ISI marked such as bends, elbows, Tees, short pieces, back nuts, connectors, diminishing pieces caps pegs and clamps, unions etc fixed to walls and ceilings or laid in floors complete including fixing with adhesive /solvents all as directed.

All as per item no. 11 herein before but of 25 mm bore.

Supply and fix in repairs vitreous china squatting pan Orissa pattern size 580x440mm white with cast iron P or S trap front or back inlet and integral foot rests including connection to trap to flush pipe etc complete all as specified and as directed

Supply and fixs vitreous china wash down water closet pan (Pedastal pattern) EWC white including necessary fixing bolts, plastic water closet seat cover white, closed pattern with flat bottom and cover and mild steel chromium plated hinging device excluding flushing cistern complete all as directed.

Supply and fix two way bib cock double handle with flange of make Prayag Cat No. PIS-12H or equivalent makes in Jaquar/Cera/Hindware complete all as directed.

Supply and fix health faucet PTMT 15 mm bore with 1.00 metre long PVC tube and hook ,fixed complete all as specified. Make : Prayag , Cat pat No BEA-81 or equivalent in specified makes.

Supply and fix in repairs vitreous china wash hand basin, white wall mounted of size 400 x 400 mm excluding taps, chain and plug and porcelain stopper but including CI brackets and CP waste fittings and PVC waste pipe of 32mm dia complete all as specified and directed Make : - Hindaware 1st quality, CERA 1st quality, HR Johnson

Supply & fix in repairs PVC low level flushing cistern of syphonic action type 10 litres capacity fixed to wall with brackets and screwed including PVC flush pipe complete all as specified.

Supply and fix in repairs PVC connections "15 mm dia pipe of length 450 mm" with PTMT nuts all as specified and all as directed.

Supply and fix in repairs chromium plated angle valve type stop cock suitable for 15mm dia fancy type screwed at both ends down high pressure with crutch or butterfly handle all as specified and as directed

Supply and fix bib tap in repairs of 15 mm bore, long body foam flow with flange, fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of approved make and all as directed

Supply and fix fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

Supply and fix in repairs chromium plated shower rose, 125 mm dia with or without swivel joints including fixing to CPVC pipe including CP shower rod or union of 15 mm dia all as directed.

Supply and fix in repairs brass cromium plated conceled stop cock 15 mm dia, in position conceled in walls/ceilings or floors complete including making grooves & filled with cement mortar in 1:4 fiinished to match with adjacent surfaces complete all as specified and as directed.

Supply and fix in repair soap dish stainless steel of standard size as approved by GE all as specified and directed.

Supply and fix in repair brass chromium plated tubular towel rail D type 20mm dia 600 mm long between flanges all as directed.

Supply and fix sinks with drainage board made of 1mm thick stainless steel sheet for kitchen or laboratery with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Supply and fix in repairs stainless steel plate rack of size 31"x30"x10"of SS grade 304 and 0.63mm thickness fixed with rawl plug and screw complete all as specified.

Supply and fix sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

Supply and fix grating of 125mm dia of stainless steel with or without waste hole Complete all as specified and as directed.

Supply & fix PVC (SWR) floor trap 75mm bore plain with grating including jointing with solvent cement complete all as specified and as directed.

Demolition and breaking up drain pipes of any dia (Salt glazed ware, AC or PVC Pipes) set in cement mortar all as directed.

Supply and fix for 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified and directed.

All as per item 34 herein before but for 110 mm dia.

Supply & fix PVC door bends 75 mm dia with access door complete as directed.

All as per item no. 36 herein before but 110 mm dia .

Supply and fix PVC branch pieces, single(equal or unequal) or with parallel branches 75 mm dia all as directed.

All as per item no. 38 herein before but 110 mm dia .

Supply & fix PVC (SWR) vent cowl 110mm dia complete all as specified and as directed.

All as per item no. 41 herein before but 75 mm dia .

Supply and fix in reapirs 40mm dia low density poly ethylene pipes (LDPE) of pressure rating 6 kg/ cm2 laid in trenches, ceiling or under floors all as specified and as directed.

Taking down chowkat with shutters without taking off shutter from the frame area not exceeding 1.5 sqm each all as specified and as directed..

All as per item No 43 above here-in-before but exc 1.5 sqm and not exc 4 sqm each.

Taking down shutters of any description exceeding 1 sqm but not exceeding 2 sqm each all as specified and directed.

Supply & fix pressed steel frame of 165 x 60 mm of thickness 1.25 mm for doors with one or more 30mm rebates including necessary supply and fixing lugs, locks, strike plate including fixing of hinges etc also including flat iron hold fast, threshold plate and filled with PCC 1:3:6 type C0, inside MS frame all as specified and as directed. Note: Hinges shall be measured and paid as supply only.

Supply & fix factory made 100% solid wood plastic composite (WPC) door frame of size 90mm x 45mm made from wood plastic composite (single extrude process) material with density 780 kg/CBM and manufactured by Rajshri Plastiwood or equivalent all as per specification drawings as directed by Engineer-In-Charge. Door frame should be water proof and termite proof, fire retardant and having good screw holdind capacity all as specified.

Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width, stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail ; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles. & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling and fixing in the frame as required at site complete and as directed of approved make. Make - Rajshree Plastiwood /Sintex

Supply and fix factory made solid PVC moulded door shutter 28 to 30 mm thick (Style) with 2, 4, 6 raised panel design with 2 mm thick moulded prelaminated PVC sheet on front face & 2mm Plain colour PVC Sheet on back face, supplying & fixing at site as per specification.

Supply and fix 35mm thick second class hard wood plain framed factory made panelled shutters (two panels) 12mm thick veneered particle board with commercial face veneers on both side as panel inserts, styles and rails shall be of second class hard wood timber generally conforming to IS-1003(Part-I) (Door shutters) kiln seasoned and chemically pressure treated and all as specified.

Supply and fix 35 mm thick second class hard wood factory made glazed and skeleton shutters, open rebated and prepared to recive glass gauze, etc divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads or securing glass etc: sizes of members of shutters as specified in SSR Part-I, Section B, clause 8.24 and directed

Material & labour for anodized aluminium powder coated (not less than 50 micron) sliding window with anodized aluminium frame of 3 Track of size 92 mm x 32 mm x 1.3 mm thick, with sliding shutters with necessary channels (top rail, bottom rail and style of size 40 mm x 18 mm x 1.10 mm thick) including glazing with tinted sheet glass panel 4.00 mm tick and stainless steel wire cloth, fitted with necessary jointing cleats, glazing clip, locking device one for each shutters, rubber packing, aluminium beading, screws etc, complete all as specified and directed. Make : Jindal / Hindlco

Supply & fix anodised aluminium powder coated (not less than 50 micron) frame for louvers section of size 75 mm x 40 mm x 1.6 mm including 3.00 mm thick frosted glass and glazing cleat and revolving arrangement with standard section aluminium including rubber packing, aluminium beading or gasket for aluminium sections for fixing glass sheet louvers and necessary fittings complete screws, plugs, handle, tower bolt, stay hookes etc complete all as specified.

Supply and fix sheet glass of 3mm thick ordinary quality and glazing with oil putty or beading in square n exc 0.5 sqm in each pane complete all as specified and directed

Supply and fix butt hinge, medium weight, cold rolled mild steel 100mm long with necessary bolts all as specified and as directed.

Supply and fix aluminium, anodised, barrel tower bolt of extruded section, 100 mm long all as specified and as directed

All as per item No 56 above here-in-before but 150 mm.

Supply and fix ISI marked extruded aluminium alloy handle fabricated type anodised 150 mm long all as specified and as directed.

Supply and fix aluminium anodised 16 mm dia sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy 300 mm long and fixed all as specified and as directed

Material & labour for 25 mm thick PCC for bedding of tiles in 1:2:4 type B-0 using 12.5 mm graded broken stone aggregate as in under layer for laying tiles in floors all as specified and directed.

Material & labour for granite (of any type and any colour) work of 18 mm to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms etc., including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and over and including 15mm thick screed bed or bedding layer in CM 1:6 for laying granite top complete all as specified and as directed. Note : Granite should be best quality as approved and should be provided in one piece jamb including chamfered /moilding of exposed edges.

Material and labour for drilling holes for insertion of pipes etc in granite /Cudappah including RCC slab not exceeding 25mm dia and not exceeding 100 mm depth complete all as specified and as directed.

Demolition of brickwork or stone /boulder masnory, built in cement mortar including all quions, arches, pillars etc complete all as directed.

Material & labour for brickwork with sub class 'B' bricks straight or curved on plan to any radius in half brick thick wall built in CM 1:4 all as specified and directed..

Material & labour for brickwork with subclass 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6 all as specified and directed.

Demolition of reinforced cement concrete (reinforcement shall be cut as required to facilitate demolition) n exc 15 cm thickness (below or above ground level) all as specified and directed.

Material & labour for reinforced cement concrete type B1, 1:2:4 using 20 mm graded stone aggregate as in slabs supported on walls, beams and columns in floors,roofs, landings,shelves and in similar articles complete all as specified and as directed.

Supply and fix TMT bars 10 mm dia and over as in reinforcement cut to length, bent to shape required including cranking, bending and binding with mild steel wire not less thn 0.9 mm dia all as specified.

Material and labour for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) , surface finished smooth all as specified and directed.

Material and labour for 75mm thick PCC 1:3:6 mix type C-1 20mm graded aggregates as in plinth protection finished even fair including bituminous mastic filling in joints all as specified and directed. Note : Joints shall be provided 2.50 m distance centre-to-centre and at corner.

Material and labour for forming construction joint 30 mm deep x 10mm wide filled with sealing compound Grade B complete all as specified and directed

Taking down cement plaster on brick or stone walls, etc, including raking out joints, hacking for key, scrubbing down with water etc all as specified and as directed.

Material & labour for rendering 15 mm thick in cement mortar 1:6 including patches on vertical fair faces of brick/concrete surfaces and finishing the surfaces even and smooth without using extra cement all as specified.

Material & labour for rendering 20 mm thick in two coats including chajjas, facia and similar including patches in cement mortar 1:4 with water proofing cmpound on vertical fair faces of brick/concrete surfaces and finishing the surfaces even and smooth without using extra cement all as specified. Note :- WPC shall be measured and paid seperately.

Material & labour for rendering 10mm thick in cement mortar 1:3 on fair faces of or concrete surfaces of ceiling finished even and smooth without using extra cement all as specified and as directed.

Material and labour applying 3 coats of white wash on newly plastered surfaces of walls including patches, including preparation of surfaces complete all as specified and directed.

Material and labour for applying two coats of oil emulsion distemper over a coat of wall care putty not less than 1.5 mm thick on new plastered surface over a coat of primer so as to have smooth surface before applying OBD all as specified and as directed.

Material and labour for preparation of newly plastered surfaces and applying two coats of exterior acrylic emulsion weather proof paint over one coat of priming paint plaster coat on external surface on wall complete all as specified and as directed. Note: The rate quoted shall be deemed to include for all safety measures, scaffoldings etc., required for carrying out the work and nothing extra on this account shall be admissible.

Material and labour for applying two coats of white wash on newly decorated surfaces of ceiling including preparation of surfaces complete all as specified and as directed .

Supply and fix galvanized mild steel wire cloth with 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tracks or wooden beading all as specified and as directed.

Material and labour for preparation of new wooden surfaces of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer all as specified.

Material and Labour for complete removal of existing treatement on old plastered surfaces of walls and applying two coats of oil bound distemper over a coat of wall care putty not less than 1.5 mm thick over coat of primer so as to have smooth surface before applying OBD, white or tinted all as specified and directed complete

Material and labour for complete removal of existing treatment on wall surfaces including removing nails, making good holes, cracks etc., brooming down or scrapping down smoke shoots by using steel wire brushes and applying two coat of white wash all as specified and as directed.

Materials and labour for preparation of old surface by brooming down and steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and greasy spots tec, and applying one coat of white wash on ceilings, all as specified & as directed

Material and labour for applying one coat of synthetic enamel paint over wood or wood based surfaces exceeding 10 cm width or girth including preparation of old surfaces all as specified.

All as per item No 85 above here-in-before but in two coats.

Material and labour for complete removal of existing treatment on wall surfaces including removing nails, making good holes, cracks etc., brooming down or scrapping down smoke shoots by using steel wire brushes and applying two coat of exterior acrylic emulsion over a coat of exterior acrylic primer of approved colour all as specified and as directed. Note: The rate quoted shall be deemed to include for all safety measures, scaffoldings etc., required for carrying out the work and nothing extra on this account shall be admissible.

Supply and fix in repairs mild steel ordinary rat tails 300 mm size pattern springs including roller and roller plate complete including welding to steel frame as required all as directed.

Supply and fix mild steel framed work such as grills, gratings, framed guard bars and similar work con- forming to Fe.290.Gde-E-165 fixed to wooden frame or welded to steel frame complete all as specified and directed.

Supply & fix stainless steel wire cloth, 4.00 mm nominal dia with adjustable hook with threading for tightening and including pully and making good complete all as directed.

Taking down carefully existing treatment including plaster of any discription and thickness, PCC over the surface of roof, terrace including flashing and junctions of parapets/curbs wall and cleaning the surface and make free from dirt, forgein particles, laitance followed by grinding all protrusion to make surface modulated and removing of the rubbish to beyond defence land by contractors own arrangement including taking down /dismantling the existing water tank any size and refixing the same with old fittings without any damage and making good complete after roof treatment work as directed.

Material and labour for Cement Concrete type B 0 (1:2:4) using 12.5 mm graded stone aggregate mixed with integral water proofing admixture of Shaliplast LW+ or STP No.1 or Dr Fixit as approved @ 200 ml per bag of cement as in floors/cover concrete to water proofing over roof finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for 5mm thick bedding layer in CM (1:3) on concrete surfaces (when concrete is green) mixed with WPC 200 ml per 50 kg of cement bag or as per manufacturers instruction finished the surface fair and even complete all as specified and directed. Note:- WPC shall be measured and paid separately

Supply only approved integral water proofing compound.

Material and labour for cleaning the newly plastered surfaces throughly with wire brushes and providing water proofing treatment all as sepcified here in after :- (a) Bituminous primer @ 0.30 liter per sqm conforming to IS 3384-1986. (b) 3 mm thick App polymer modified moply FP of M/s TEXSA ltd or M/s TIKI Asphalt hydro stop or IWL 3.50kg /sqm membrane (one layer) laid by torch application method longitudinal direction duly thermofused by flame torch all as specified in application manuel of the company. (c) Painting with bituminous aluminium paint @ 200 gms per sqm in two coat.

INTERNAL ELECTRIFICATION

Disconnecting electric supply and taking down the Light fitting any type and making good the disturbed surface complete all as specified and directed.

Material and labour for point wiring complete with two single core, PVC insulated, unsheathed, multi stranded bright annealed copper conductor cable, 1.5 Sqmm 1100 volts, FRLS grade drawn through and including heavy duty PVC conduit not less than 20 mm dia and accessories concealed on walls, ceiling etc. on and including GI /MS sunken boxes board with earth dolly arrangement with surface plate for mounting modular fittings such as switches, sockets, regulators etc. including modular cover plate of requisite modules and one run of 1.5 Sqmm PVC insulated, unsheathed, multistranded, copper conductor cable FRLS grade as earth wire and connected to common earth dully complete all as specified and directed for one light/fan/bell point controlled by one switch. Note :- Cutting and making good of chasis in the wall /roof/floor is deemed to be included in the quoted rate.

Supply and fixing modular switch one way 6 Amp, 1 module all as specified and directed.

Supply and fixing modular switch one way 16 Amp, 1 Module all as specified and directed.

Supply & fix modular socket 16 amps-6 pin multipin, 2 module all as specified and directed.

Supply and fix Ceiling rose of 3 phase/PVC/ polycarbonate, isolated body 50 x 28mm two or three terminals all as directed. Make : Anchor/ Leader

Supply & fix in repairs Modular white cover plate with frame, 3 module all as specified and directed.

Supply & fix Modularflush metal box, 3 module all as specified and directed.

Material and labour for sub main wiring with PVC insulated heavy duty copper conductor 1100 Volts FRLS grade 2 run of single core 2.5 Sq.mm cable and 1 run of 2.5 Sq.mm copper earth wire for continuous earth fixed on wall /ceiling/floor etc and including PVC conduit 20 mm dia ISI Mark complete all as specified and as directed. Note :- Cutting and making good of chasis in wall or roof or floor is included in the quoted rates.

Supply & fix decorative ultra slim square profile linear LASER RAY lighting fixture extruded polycarbonate, environmental friendly, energy efficient ready to use pack 20W LED 6000K, complete with connecting accessories duly pre-wired and connecting up with 0.5 sqmm 3 core flexible copper cable cord from fitting complete all as specified and directed. Make : Crompton Model No. LDLSR-20-CDL or equivalent in Bajaj/ Havells.

All as per item no. 105 above here in before but of 10W. Make : Crompton Model No. LDLSR-10-CDL or equivalent in Bajaj/ Havells.

All as per item no. 105 above here in before but of 5W. Make : Crompton Model No. LDLSR-5-CDL or equivalent in Bajaj/ Havells.

Supply, fixing, intalling and testing of water heater storage vertical type of capacity 25 Litres, 5 Star rating, 2KW,max rated pressure of 8 bar, with unique polymer coating technology, special titanium enamelled heating element alongwith special deflector including grouting and fixing with suitable size of nuts and bolts in the wall with PCC bed blocks of 1:2:4 type BI using 20 mm graded stone aggregate and making good the disturbed surface including electric and water connection and marking MES No in black paint complete all as specefied and directed. Make : Havells Puro Plus 25 Litre plastic body 5 star rating or equivalent make in Crompton/Bajaj

Supply and fix steel water tubing 15 mm bore, galvanised, medium grade with and including provision of all fittings of ISI marked and fixed to walls and ceilings or laid in floors complete all as directed.

Supply & fix bib taps plug type of size 15mm dia., cast copper alloy with crutch or butter fly handle, screwed down screwed for iron pipe or brass ferrule complete all as directed.

Supply and fix stop valves of size 15 mm bore dia, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified.

Supply and fix exhuast fan heavy duty 300 mm sweep with louvers operated on 230/240 Volt AC single phase electric supply 900 RPM complete duly grouted bolts in the wall fixed with nuts, bolts and washers including making suitable size hole in the existing wall , plastering, white washing or colour washing to the disturbed surface of wall complete matching with the existing including connecting with 3 core stranded copper conductor cable cord of size 0.5 Sq.mm from ceiling rose to fan connector complete all as specified and as directed. Make- Crompton EXHD300-4-1 or equivalent model of Bajaj/Havells.

Note:- The amount of schedule of credit on page No. 37 shall be deducted from the amount quoted against sch 'A' while deriving at the contract sum for accptance.

M/s M R MAHANA

Anand Trading Co