PROVISION OF TWO WHEELER PARKING SHED AT OTM COMPLEX AT AGARDANDA

Amount

(Note - (i) Work to be carried out on GL to 06th floor (Iincluding terrace of buld) from ground levels (ii) Rate for scaffolding and safety system for labour are included in quoted rates by contracter.) (iii) Safety Net and Water proofing covering materials shall be arrange by contracter while working at site and it will be deem fit in quoted rates by contracter. Excavation in trenches in soft/loose not exceeding 1.50m wide and not exceeding 1.50m in depth for foundation, etc for pipes, walls, cesspits, manholes, pier holes, cables etc and getting out complete all as specified and directed

Removal of excavated soil to a distance exceeding 250m and not exceeding 500m depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed

M&L for PCC (1:4:8) type D2 using 40mm graded aggregate for foundation filling and mass concrete etc complete all as specified & directed.

M&L for mild steel reinforcement TMT bars, 10mm dia and over cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed.

S & F mild steel TMT bars, 5mm dia and over up to including 10mm dia in stirrups, cut to length, bent to shape required, including bending for columns, beams hooking ends and binding with & including MS wire (annealed) not less than 0.9mm dia or securing with clips.

M&L RCC M-25 (design mix) as in foundation, incl raft, footings foundation beams, plinth beams, bases for columns etc using 20mm graded stone aggregates complete all as specified & directed.

M&L RCC M-25 (Design mix) as in columns etc using 20mm graded stone aggregates complete all as specified & directed.

M&L for form work to sides of concrete foundations, footings, bases of cols, raft and raft beams, side and soffits (if any) of foundation and plinth beams and similar works rough finished surfaces of concrete complete all as specified & directed.

M&L for form work to sides of pillars, posts, struts, piers & columns rough finished surfaces of concrete for sqaures or rectangular and similar rough finished surfaces of concrete flat complete all as specified & directed.

S & F Pre-painted galvatume aluminium zink AZ-150 coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws with bent to a curve as company manufatured (as any radius as per requirment) complete all as specified and directed by Engr-in-Chrage. (Make: AZ-150 TATA/JSW)

S & F Pre-painted galvatume aluminium zink AZ-150 coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws with bent to a curve as company manufatured and girder of side of foof sheet to drain out the water through drain pipes and claimp with curve flat including all necessary arrgngment (as any radius as per requirment) complete all as specified and directed by Engr-in-Chrage.(Make: AZ-150 TATA/JSW)

M & L framed work such as grills,grating etc with ends of bars shouldered and or riveted or forget into spikes framed guard bars barred iron doors,ladders,framed balusters,walk ways,railings,frame work of water tanks and similar work and for portions framed and hung as gates,including pintle hinges,stop,hand-made sliding bolts etc conforming to Fe 290 Gde-165,MS flats with required shape and size to be fixed the girder to drain out water complete all as specified and directed.

M & L for rolled Fe 410 (Gde E-250 A quality) mild steel work curved or straight as in joist,channel,angle,tee sections,flats fixed independently,rivetting or welding,with/without connecting plats etc ( cut to ordinary length i.e.within 20mm of the length indicated) complete all as specified.(Steel Structure,Ladder,Chowkhat and all type of steel work) complete all as specified and directed.

S & F MS Plates Fe 410w Gde E-250 quality A (Plain or chequired) channels,square cut or notched (ordinary and counter sunk) forming holes,without any attachment complete all as specified and directed.

S&F 16 to 20mm dia of neck Mild Steel screw bolts (machine made) with hexagonal or squre heads at one end and screwed the other,or screwed both ends,each screwed end to be fitted with washers and one hexagonal or squre nut n exc 5cm long complete all as specified and directed.

S & F 20mm dia of neck Mild steel rag or lewis bolts,screwed one end with hexagonal or square nuts and washers the other end enlarged and jagged or lewised n exc 15cm long complete all as specified and directed.

M&L for preparation of new steel surfaces of any descriptrion over 10 cm width or girth and applying two coat of synthetic enamel painting over one coat of red oxide zinc chrome primer to steel surface complete all as specified and directed.

S&F 110mm bore PVC SWR pipes single socketed in any length as in weep holes complete all as specified & directed.

S&F 110mm bore PVC SWR bends fixed with pipe at any level complete all as specified & directed.

Surface excavation n exc 30 cm deep and averaging 15cm deep and getting out in hard/dense soil complete.

M & L for hard core of broken stone of gauge n.exc 63mm deposited spread and levelled in layer n exc 15 cm thick watered and well rammed to true surfaces complete all as specified and directed.

M & L 75mm thick cement concrete type D-2 1:4:8 (40mm graded aggredate) as in sub base complete all as specified and directed.

M & L for machine pressed precast concrete interlocking paver block with glossy finish of any size confirming to IS 15658-2006 of 60mm thickness M-35 Grade fixed with grey cement and no pigment including 50mm thick sand cushioning complete all as specified and directed by Engr-in-Chrage. (Make:Super Tiles) (Shape shall be approved by Engr-in-Chrage)

M & for PCC 1:2:4 type B-1 (using 20mm graded aggregate) in kerbs,rounded or chamfered on edges including necessary form work complete all asspecified and directed.

M&L for brick work with sub class ;B' bricks straight or curved on plan exceeding 6m mean radius with old size bricks built in cement mortar (1:6) complete all as specified & directed.

M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 and finishing the surfaces even & smooth without using extra cement, complete all as specified and as directed by the Engineer-in-charge.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.(Make: Asian)

M & L for 70mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate as in plinth protection complete all as specified and directed.

M & L for Plastic dividing strips, 1.5mm thick and 38mm in width fixing in concrete for expansition joints complete all as specified and directed.

M & L for point wiring for complete with proper colour coding using 1100 Volts grade 1.5 sqmm PVC insulated FRLS unsheathed cable with multistranded copper conductor conforming to IS : 694:1990 with ISI marking in PVC Conduit clamped to shed truss members , ISI marked with all accessories fixed in wall/ceiling/roof/floor etc ,with modular white cover plate and frame of module suitable for mounting switches, sockets, fan regulators including 1.5 Sqmm PVC insulated FRLS unsheathed 1100 Volts multistranded copper conductor green colour conforming to IS : 694:1990 with ISI marking as continuous earthwire connected to common earth dolly all as specified and directed for the following : Make for copper cable - Plolycab, KIE, finolex ,Universal cables. Make for cassing capping pipe - Pressfit or equivalent (a) One light controlled by one switch

M & L for point wiring complete with proper colour coding using 1100 Volts grade 2.5 sqmm PVC insulated FRLS unsheathed cable with multistranded copper conductor conforming to IS : 694:1990 with ISI marking in and including PVC Conduit clamped to Parking truss members , ISI marked with all accessories fixed in wall/ceiling/roof/floor etc , with modular white cover plate and frame of module suitable for mounting of 3 pin socket 16 Amp, Independent including 2.5 Sqmm PVC insulated FRLS unsheathed 1100 Volts multistranded copper conductor green colour conforming to IS : 694:1990 with ISI marking as continuous earthwire connected to common earth dolly all as specified and directed . Make for copper cable - Plolycab, KIE, finolex ,Universal cables. Make for cassing capping pipe - Pressfit or equivalent Note : For Item No 30 & 31, Circuits of 2.5 sqmm cu cable in PVC clamped to wall/truss from MCB DB box to Switch board is included in respective Quoted amount of items.

S&F Moduar switch 16 Amp , 1 way , 1 module complete all as specified and as directed.

S&F Moduar Socket 6/16 Amp ,2/3 pin combined , 2 module complete all as specified and as directed.

supply and fixing MCB DB box 8 way , double door with earth and neutral link for connetion to light circuits , power citcuits etc with all testing arrangements and fixed to a location as assigned by engineer-in-charge.

Supply and fixing MCB SPN 32 Amp , C curve , complete with connection etc all as specified by engineer-in-charge.

Supply and fixing MCB SP 6-32 Amp , C curve, complete with connection etc all as specified by engineer-in-charge.

Supply and fix in repair LED tube light fitting 1X 20 Watt including LED light 20 watt, industrial channel made of CRCA sheet steel housing suitable for complete with all accessories internally pre-wired, connecting up with and including three core sheathed flexible copper conductor cable of 0.75 Sqmm size and PVC square block for fixing LED tube fitting complete all as specified and directed. Make:- Halonix Cat No HLIB-05-118T8 LED or equivalent in Bajaj/Philips/ CG

Supply and fix FRP looping box of size 250x200x105mm with connector and comprising of MCB SP 6 Amps, ISI marked,240V complete with and including providing GI clamps,nuts bolts etc suitable for fixing on PCC pole/ wall etc complete all as specified and directed. Make:- FRP Box - National/Sintex, MCB- Havells, ABB, Schenider,L&T

Supply and fix LED street light fitting 90 watts, made in pressure diecast housing with epoxy power coated dark graphite grey colour finish.prismatic polycarbonate cover with individual LED lenses with IP 66 complete with all accessories and necessary fixing arrangement on wall/ poles at any height including heavy grage al clamped complete all as specified and directed. Make:-Havells/ BAJAJ/Crompton

Supply and fix GI bracket pipe of size 25 mm dia medium grade of 1.2 mtr long bent to shape hot or cold suitable for street light fitting and making the one end of GI pipe bracket suitable for fixing of street light fittings of any type and the GI bracket pipe shall be fixed on wall/pole surfaces by providing suitable MS iron 25x4 mm clamps 2 nos of 25 cm long duly to the bracket pipe and painting to MS clamps and fixing with necessary suitable nuts,bolts & washers complete all as specified and directed. Make of GI pipe:- Jindal/Tata/BST

Supply and fix copper conductor cable, PVC insulated, sheathed,flexible, multistranded,ISI marked, 1100 volts grade, 3 core ;2.5 sqmm and including connection and testing complete all as specified and directed. Make:-Havell/Finolex/Plaza/Polycab

Supply,lay and testing LT cable XLPE insulated,galvanised steel strip armoured,1100 volts grade with stranded aluminium conductor of cross-sectional area 6 sqmm; 2 core laid in trenches/pipes/ducts/walls and connection with necessary cable lugs and glands, nuts, bolts and washers etc and testing complete all as specified and directed.

Cutting of existing road, concrete/bituminous surface by using of mechanical method of any type complete all as specified and directed. Note :- PCC for making good road surfaces shall be measured and paid separately.

DWC Pipe 40 mm dia laid in trenches for protection of u/g cable all as specified and directed.

Excavation in trenches in soft/loose soil not exceeding 1.5 meter in depth for foundation of pole laying of cable etc and getting out complete all as specified and directed.

Returning filling in of soft/ loose soil , including spreading levelling watering and well ramming in layers not exceeding 25 cm thick each layer complete all as specified and directed

SHRI SIDHI VINAYAK ENTERPRISES (BID ID -3211234)

BA Enterprises (BID ID -3214346)