3-Construction work of road from T-junction towards Dhyan Singh in village of Rukanpur. MLA-Nehtaur

Dismantling cement concrete or brick or granolithic floors including base concrete and including stacking of dismantled materials as directed by the Engineer-in-charge with in a distance of 60 meter(200 feet). S.I.No.- 697, Ch-18

Providing, laying, spreading and compacting Stone aggregates of specific sizes to Water Bound Macadam (WBM-G-III) specification incl spreading in uniform thickness, hand packing , rolling with three wheel 80-100kN static roller in stage to proper grade and camber , applying and brooming , crushable screening to fill up the interstices of coarse aggregate , watering and compacting tothe required density Grading 3 as per Technical Specification Clause 405.

Concrete with 4cm. Guage Stone ballast fine sand of 2.20 F:M. and cement in proportion of 12:6:1 in foundation, Sub base and under floors including supply of all meterials, labour and T&P etc. required for proper completion of work.S.I.No 281(a)+New(Rate As per S.O.R.- Rampur Circle).(Rate sanction As Per S.E. Moradabad Letter No 613 , NI-02)

M-150 brick work in 1:4 (one cement and Four coarse sand of 1.25 F.M.mortar) in foundation and plinth including supply of all meterials, labour and T&P etc. required for proper completion of work. S.I. No. 305

12 MM thick Plaster with one part of cement and four part of approved corse sand mortar 2.25 fm over brick work including supply of all marerial labour taxes T&P etc. Required for proper completion of the work S.I.no. 584

Cement Concrete with 2cm. guage approved stone grit coarse sand and cement in proportion of 4:2:1 including supply of all materials,labour and T&P etc. required for proper completion of work. S.I. No. 279A

Supply & Fixing 80 mm thick Precast cement concrete I-Shape interlocking paver block a with top layer of minimum 8mm thickness having plan dimension 200x(160+120mm)of O.P.cement, Smooth high gloss finish, skid reditant.manufactured from rubber moulds through vibro-compression machanism. The compressive strength of concrere paver block shall not be less than 30MPA (M-30) and wight 5kg per no confirming to IS; 15658-2006 with a 4 cm thick layer of fine sand including cost of material,labour, T & P TAXES etc requried for proper completion of the work as directed by Enginner-in-charge..(CH-23, S.I.No.New Item -05 )

Laying of N.P.3 600 MM Dia Hume Pipe

S/F Information /sign board i/c all comp. at site.18 mm thick stone granite Board.