GE(S) BTD 87 OF 2024-25 SPECIAL REPAIR AND REVENUE WORKS UNDER AGE BR II AND AGE EM IV UNDER GE(S) BATHINDA AT BATHINDA MIL STN. Job No (81SABTDSR(B) 10 of 2024-25 81SABTDSR(B) 22 of 2024-25 AND 81SABTDREV 06 of 2024-25)

Amount

Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete and including the provision of 10 mm thick bedding layer in cm 1:6 all as specified and directed.

M& Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed and including the provision of 10mm thick rendering in CM 1:4 all as specified and directed.

Dismantling stone slabs,Granite stone of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including backing coat of 10 mm in cement mortar 1:4.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4, surface finished fair and even. complete all as specified and as direcetd.

Taking down cement plaster on brick work or concrete surfaces etc including raking out joints or hacking for key, scrubbing down with water etc.

M&L Preparation of new plastered or unplastered surfaces of walls, applying 3mm thick wall care putty on wall and two coats of distemper oil emulsion over one coat of priming plastered surfaces with alkali resistant priming paint complete all as specified and as directed.

M&L Preparation of old (Previously treated) plastered or unplastered surfaces of walls by washing, rubbing down and stopping of distempered or painted surfaces of walls and applying one coat of Oil Bound distemper white or tinted on walls complete all as specified and directed.

M&L Preparation of old plastered or unplastered old decorated surfaces of walls by brooming down or steel wire brushing, scrapping down smake soot, moulds, mass and efflorescent salts and trading oil and greasy spouts and applying one coat of cement base paint on walls including cornices etc complete all as specified and directed.

Taking down chowkhats or frame with shutter (without taking off shutters from the frames) not exceeding 1.5 Sqm each and removal from site complete all as specified and as directed.

M&L Factory made steel window box type using ERW hollow 'P' section comprising double frame for and including gauged and glazed Skeleton shutter jointed internally with flat iron 40x4mm complete including grill of 8mm square bars, fixed horizontally @ 10cm c/c, hinges, handle, tower bolts, stops, lugs etc.

All as per Srl item No 11 above but steel ventilators top hung.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but not exc 4 Sqm each complete all as specified and as directed.

M&L Pressed steel door frame of size 125x60mm, double rebated for doors made out of 1.25mm thick mild steel sheet including necessary fixing lugs, hinges lock strike plate etc, complete all as directed.

M&LPressed steel door frame of size 105x60mm, double rebated for doors made out of 1.25mm thick mild steel sheet including necessary fixing lugs, hinges lock strike plate etc, complete all as directed.

M & L for PCC 1:3:6 type C1 (20mm graded crushed stone aggregates) as in filling back of pressed steel door frames/chowkats and for fixing hold fasts, etc., complete all as specified and directed.

S&F 35mm thick factory made panelled shutter (two panel) plain framed with lock rail and panel of 12mm thick plywood commercial type and chemically pressure treated of second class hard wood rails and styles and the size of rail and style as per IS-1003(Part I).

M&L Glazed and Skelton shutters using 2nd class hard wood 35mm thick open rebated and prepare to receive glass or gauge etc edges of framing plain and chamfered or fitted cut or mitered beads for securing glass size of member of shutter as specified in SSR Part-I section 8, clause 8.23(a) and divided in square complete all as specified.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

S & F 3.0mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.50 Sqm in each pane complete all as specified and directed.

Supply only mild steel Butt Hinges, 100 mm size, medium weight, cold rolled fixed with complete all as specified and directed.

S&F aluminium anodised barrel tower bolts of extruded section, 150 mm long (ISI marked) complete all as specified and as directed .

S&F aluminium anodised handles, 150 mm long, cast type, (ISI marked) complete all as specified and as directed .

S&F 300mm long aluminium sliding doors bolts, plate type, stove enameled black bolts and nuts, four on bolt plate and two on staple all as specified.

Material and Labour for painting to new wood and wood based surfaces of any description, over 10 cm in width or girth, not otherwise described with two coats of synthetic enamel paint over a coat of pink primer including preparation of surfaces complete all as specified and as directed.

M&L for Preparation of new or previously untreated surfaces of steel and iron surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats synthetic enamel paint over a coat of red oxide primer complete all as specified and as direcetd.

M&L for Preparation of old surfaces of steel and iron surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats synthetic enamel paint over a coat of red oxide primer complete all as specified and as direcetd.

M&L for 25mm dia stain less steel pipes for curtain rod with brackets and knobs at both ends as per site requirement including taking down old existing PVC conduit pipes with accessories complete all aspecified

Taking down rain water pipe and eaves gutters (any size and pattern) incl all fittings heads shoes bends swan necks etc.

S&F PVC 110mm bore (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls.

S&F PVC 110mm bore (SWR) bends, fixed to walls

Supply only of Liquid water proofing compound of approved make complete all as specified and as directed.

Demolition of brick work built in cement mortar including all quions, arches , pillars etc.

M&L for brick work with sub class ‘B’ bricks, straight or curved on plan exc 6 M means radius built in CM (1:4) using old size bricks complete all as specified and as directed.

M&L brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM 1:4 but except bricks (old serviceable bricks to be used) complete all as specified. Note : The rate includes for cleaning of old bricks.

Material and labour for cement concrete (1:2:4) type B-1, using 20 mm graded stone aggregates as in bands, bedding, benching of manholes, coping, surface channel, roof kerbs or mud stops, rounded or chamfered on edges etc including necessary form work complete all as specified and as directed.

Material and labour 75mm thick, cement concrete 1:3:6, type C2 using 40mm graded crushed stone aggregate as in floors, plinth protection, paths, etc and finishing top surfaces even and smooth without using extra cement complete all as specified and directed. complete all as specified and as direcetd.

Demolition Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets

M&L Anodised aluminium snap grid (Size 605mm x 605mm)frame work for false ceiling all as specified complete all as specified and as direcetd.

S & F non asbestos fibre cement building boards " Indian Gypsum" fixed GI framework with screws 12 mm thick in ceiling flat jointless finish wwith jointing compound and jointing tape as per manufacturers instructions complete all as specified.

Dismantling of AC sheets (corrugated, semi corrugated etc) sheets in roof covering including ridges all as directed.

S & F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Dismantling wrought iron or mild steel work of any description not otherwise provided for as specified and as directed.

S&F strutural steel work as in MS joist, chanel, angle, or tee sections, fixed independently, without connecting plates, etc (cut to ordinary lengths i.e. within 20mm of the length indicated) complete all as directed conforming to Fe 290 Gde E-165.

S&F framed brackets of angles cut to shape, drilled and counter sunk for screw including bending and welding angles as necessary, each backets confirming to Fe - 290, Gde - E - 165 as door frame, sink, hand wash basin and cooler stand etc complete.

Demolition of Cement Concrete (Unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level)

M&L for 100 mm thick cement concrete type D-2, 1:4:8 (40mm graded agg) as in Sub-base to floor finishes.

M&L 25mm Sand filling under floors or in foundations including watering and consolidation

S&F Machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade

Taking Down Chowkhats or Frame with Shutttter ( with out taking out shutter from the frame ) not exceeding 1.50 sqm each as doors , windows aaa& ventilators etc and removal from site all as specified and directed

S&F aluminium powder coated ventilator including necessary rubber gasket for fixing glass panes etc complete all as shown on drawing No CEBT/SK-936 sheet No.1/1. (Note- Glass panes and wire mesh shall be measured and paid for separately).

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish to a distance exceeding 1 km but not exceeding 2 km.

S&F in repair brass chromium plated shower rose 70 mm of size with arme and with or without swivel joints to steel pipe or union complete all as specified and as directed.

S & F in repairs, stainless steel chromium plated soap tray of size 100 x 100 x 60mm and fixed on wall with chromium plated brass screws complete

S&F grating doom 125 mm dia grating with or without wastehole ptmt

Taking up or down GI tubing 15 mm bore pipe including cleaning for refixing and removal to store

Taking up or down GI tubing 20 mm bore pipe including cleaning for refixing and removal to store

S & F in repairs PVC valveless, syphonic action type, flushing cistern, 10 litres capacity, low level, white, with inlet, ball valve, float and handle including brackets and PVC flushing pipe 32mm dia 900 mm long complete..

S & F in repair Jet spray, CP, brass body with wall hook and 1 mtr SS pipe complete all as specified and directed.

S&F wash hand basin of size 550 x 400 mm vitrous China white flat back including brackets, waste coupling & PVC waste pipe of 32 mm dia etc. complete all as specified and directed. Make :- Hindware Cat No 10055 or equivalant from Jaguar / Parryware / Cera.

Dismentalling and disconnecting of existing CI soil vent pipe 100 mm bore fixed to wall , laid in trenches incl all fittings and accessories

Dismentalling and disconnecting of existing CI soil vent pipe 75 mm bore fixed to wall , laid in trenches incl all fittings and accessories

S & F in repair 75 mm bore of pipe PVC (SWR) type B pipes single socket in any length with rubber ring joint fixed to walls with GI Brackets at a distence of 100-120mm away from walls as directed 6 Kg/Sq cm.

Dismentalling water tanks of exc 500 ltrs and n exc 1000 ltrs capacity water storage tanks remove from site complete

S&F 1000 litres capacity Rotational moulded polyethylene in white colour, three layered, water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position

S&F ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe of size 25 mm bore (minimum weight 210 gram).

M&L applying two coat of white wash over new plastered surfaces of wall etc complete all as specified

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth ; for foundation, etc. or for shafts, wells, cess pits, manholes, pier holes, for laying cables etc. not exceeding 10 Sq m on plan and not exceeding 1.5 m in depth and getting out in soft /loose soil cmplete all as specified and as direcetd by the Engineer-in-Charge.

M&L for providing PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and as direcetd by the Engineer-in-Charge.

M&L for brick work with sub class ‘B’ bricks, straight or curved on plan exc 6 M means radius built in CM (1:6) using old size bricks complete all as specified and as directed.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built CM (1:4) in complete all as specified and as directed.

M&L TMT steel bars 10 mm dia and over cut to length bent to shape required, including cranking, hooking ends and binding with mild steel wire (annealed) not less than 0.90 mm dia cmplete all as specified and as direcetd by the Engineer-in-Charge.

Description all as per item No 73 above but 8 mm dia bars as in stirrups sacers and binders cmplete all as specified and as direcetd by the Engineer-in-Charge.

M&L for providing RCC M 25, design mix, using 20 mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and like complete all as specified and as direcetd by the Engineer-in-Charge.

Reinforced cement concrete, M-25, design mix, (using 20mm graded crushed stone aggregates) as in Beams, cantilevers, bressummers, lintels over 1.50mtrs span, including proper compaction using mechenical vibrator, complete all as specified and as directed by Engineer-In-Charge.

M&L for providing RCC M 25, design mix, using 20 mm graded stone aggregate as in Chajjas cmplete all as specified and as direcetd by the Engineer-in-Charge.

M&L for providing RCC M25 design mix as in footings , foundations beams , plinth beams etc complete all as specified and directed by engr in charge

M&L for providing RCC M25 design mix as in columns , pillers , piers , posts and struts complete etc complete all as specified and directed by engr in charge

M & L for providing RCC M 25 using 20 mm graded aggregate in for beams, cantilevers, bressummers, lintels.

M&L for form work to sides of foundation sides & sofits of foundation beams plinth beam etc and similar work verticle or batter for rough finished surface of concrete flats complete all as specified and as directed

Use and waste Formwork to sides of pillars, posts, struts, piers,columns, and stanchionsfor fair finished surfaces of concrete , square.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 10cm wide

Formwork to sides and soffits of Roof beams,Gable beams & lintel beam rough finished surfaces of concrete.

M&L for Formwork to soffits of suspended slabs, such as roof slabs floor slab, landings and similar work not exceeding 200mm thick horizontal or sloping for rough finished concrete surface cmplete all as specified and as direcetd by the Engineer-in-Charge.

M&L for Form work to sides and soffits of floor or roof beam, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc, also spalys between floors and beams etc. for rough finished surfaces of concrete flat cmplete all as specified and as direcetd by the Engineer-in-Charge.

M&L for Form work to chajjas including edges for rough finished surfaces of walls cmplete all as specified and as direcetd by the Engineer-in-Charge.

M&L Rendering 15mm thick cement plaster im CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth w/o using extra cement.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 mixed with WPC as per manufacturer's instructions., surface finished fair and even. (Supply of WPC shall be measured and paid seperately) cmplete all as specified and as direcetd by the Engineer-in-Charge

Supply only of Liquid water proofing compound of approved make complete all as specified and as directed by the Engineer-in-Charge.

M&L for rendering 5 mm thick on concrete surfaces of ceilings in cement mortar 1:3 surface is to be finished even and smooth with out using extra cement cmplete all as specified and as direcetd by the Engr-in-Charge.

M&L for Three coats of white wash on new plastered surfaces as in walls including preparation of new surfaces. complete all as specified.

M&L for Preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a alkali resistant priming coat complete all as specified and as directed by the Engineer-in-Charge.

Preparation of new plastered or unplastered surfaces of ceiling and applying three coats of white washing, complete all as specified and as directed by Engineer-In-Charge.

M&L for providing 75mm thick PCC (1:4:8) type D-2 (using 40mm graded agg) as in sub base. complete all as specified and as direcetd by the Engineer-in-Charge.

M&L for providing 25mm thick PCC (1:2:4) type B-0 (using 12.5mm graded agg) as in floor. complete all as specified and as direcetd by the Engineer-in-Charge.

M&L Wet grip coloured ceramic tiles 9 to 10 mm thick ( square / rectangulr) of size 300mmx300mm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick bedding layer using type-I adhesive (thick bed fixing) confirming to IS-15477:2004 and pointed in Epoxy grout to match the shade of tile including necessary cutting as per site requirement and as per manufacturers instructions complete all as specified.

S&F glazed ceramic coloured tiles 600 x 300mm, 9 to 10mm thick in verticle surfaces such as dado / skirting, including 10mm thick bedding layer using type-I adhesive (thick bed fixing) confirming to IS-15477:2004 and pointed in Epoxy grout to match the shade of tile including necessary cutting as per site requirement and as per manufacturers instructions complete all as specified.

M&L for providing 75 mm thick PCC 1:3:6, type C-1 using 20 mm graded stone aggregate (set in CM 1:4) as in plinth protection, surfaces finished even and smooth with out using extra cement complete all as specified and as direcetd by the Engineer-in-Charge

S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and as direcetd by the Engineer-in-Charge.

S&F 4 mm thick Figured glass, pin head type and glazing with oil putty in squares not exc 0.5 Sqm in each pane complete all as specified and as direcetd by the Engineer-in-Charge.

M&L for Preparation of new or previously untreated surfaces of steel and iron surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats synthetic enamel paint over a coat of red oxide primer complete all as specified and as direcetd by the Engineer-in-Charge.

S&F Factory made single extruded WPC ( Wood Polymer Composite ) Solid Door Frame /Chowkhat of Size 45mmx70 mm comprising of virgin polymer of K value 58-60 (susension grade ), Calcium Carbonate and nautral fibers ( Wood Powder /rice husk/wheat husk ) and non toxic additives (max toxcity index of 12 for 100 gms ) fabricated with miter joints after applying PVC Solvant cement and screwed with full body threaded star headed SS screws having minimum density of 750 kg /cum and screw withdrawl strength of 2200 N (face ) & 1100 N (Edge) minimum Compressive strength of 508 N /sqmm modulus of elasticity 900 N/Sqmm and resisitence to spread of flame of class A cat with property of being termite / borer proof , water moistur proof and fire retaident and fixed in position With MS hold Fast /SS Dash Fastner incl S&F (03 Nos Per Frame ) 100 mm long SS Butt Hinges as specified and as directed by engr-in charge

S&F Factory made single extruded WPC ( Wood Polymer Composite ) Solid Plain flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (susension grade ), Calcium Carbonate and nautral fibers ( Wood Powder /rice husk/wheat husk ) and non toxic additives (max toxcity index of 12 for 100 gms ) having minimum density of 650 kg /cum and screw withdrawl strength of 1800 N (face ) & 900 N (Edge) minimum Compressive strength of 50 N /sqmm and resisitence to spread of flame of class A cat with property of being termite / borer proof , water moistur proof and fire retaident and fixing and incl S&F of 02 Nos (per Leaf) SS 150mm long Tower Bolt and S&F of 02 Nos (per Leaf) SS 150mm long handle as specified and directed by engr-in charge

S&F Vitreous Chinaware under counter wash basin, white, flat back, size 550x400mm but including brackets (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand complete all as specified and as direcetd by the Engineer-in-Charge.

S&F 15mm bore ISI chromium plated quarter turn Pillar cock screwed down high pressure, with or without lettered Hot ot Cold with long screwed shanks and flynuts screwed for iron pipe complete all as specified.

S&F in repairs vitreous china squatting pan, 'Orissa' pattern, size 580mm x 440mm, white, with integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. including making good to floor and excluding flushing cistern, flush pipe and waste pipe.Make :- CERA (conventional) / Hindware (sleek) / Or equivalant from parryware

Vitreous China wash down water closet pan (pedestal pattern), white including fixing bolts, flush pipe, plastic water closet seat, black, closed pattern with flat bottom, and cover and incl 10 Ltr flushing cistern, low level complete all as specified and as directed by Engineer-In-Charge.

S&F Vitrous china urinal half stall type white ( excluding flushing cistern, flush pipe and waste pipe ) including connections to flushing pipe and out going pipes etc complete all as specified and directed

S&F Rotational moulded polythelene water storage tanks 500 Ltrs capacity including providing 20 mm dia ball brass valve, high pressure with polythene float and fly nut complete, screwed for iron pipe complete all as specified and as directed by the Engineer-in-Charge.

S&F PVC connection 15mm dia and 60cm long with two Nos of brass check nuts and washers complete all as specified and directed.

S&F waste coupling 32 mm dia PTMT complete

Supply and fix Tubular towel rail, 20mm dia, D type, 60cm long between flanges (Brass chromium plated) all as specified and directed.

S&F in repair 15 mm dia ISI Mark bore chromium plated long body with wall flanges bib taps cast copper alloy, screwed for iron pipe, or for brass ferrule complete all as specified and as directed.

S&F 16 mm CPVC pipe sdr11and plain CPVC sdr11 fitting with all fitting and fixed to walls & ceilings or laid in floors, complete all as specified and directed.

S&F 20 mm CPVC pipe sdr11and plain CPVC sdr11 fitting with all fitting and fixed to walls & ceilings or laid in floors, complete all as specified and directed.

S & F 15 mm bore chromium plated fancy type stop valve of cast copper alloy screwed down high pressure with crutch butter fly handle screwed both ends for iron pipe or for unions and fixed all as specified.

S & F in repairs 15 mm dia bore chromium plated quarter turn concealed stop valves of cast copper alloy fancy type with long shank & cup etc. complete all as specified and as directed.

S&F 110 bore, PVC Swr bends Juction , Tee and Y (any radius), diminishing pieces or tapers (large bore measured) with oval access door as in repairs complete all as specified and directed.

S&F 75 bore,PVC SWR , bends , junction , TEEand Y (any radius), diminishing pieces or tapers (large bore measured) with oval access door as in repairs complete all as specified and directed.

S&F 75mm dia of long neck PVC SWR floor trap with grating incluing jointing to waste pipe fixed in cement concrete 1:2:4 type B1 in repair complete all as specified and directed.

S&F 100mm dia of long neck PVC SWR P trap with grating incluing jointing to waste pipe fixed in cement concrete 1:2:4 type B1 in repair complete all as specified and directed.

S&F Branch pieces,PVC SWR single 110 mm bore, equal or unqual, as in repairs complete all as specified and directed.

S&F Branch pieces, pvc SWR single 75 mm bore, equal or unqual, ordinary or inverted (spigot or socket type) or with oval acess door as in repairs complete all as specified and directed.

S&F 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Salt-glazed stoneware gully traps,(Size of gully traps in 150mm x 150 mm) square or round mouthed, tvpe 'P' complete all as specified and as directed by the Engineer-in-Charge.

M&L for providing Plain cement concrete bed for 150 mm bore drain pipes in 1:4:8 type D 2 using 40 mm graded stone aggregate including packing under and haunching against the sides of pipes of after they are laid and tested complete all as specified and as directed by the Engineer-in-Charge.

M&L for Salt-glazed stoneware drain pipes laid in trenches and jointed (Internal diameter of pipe 150 mm) as specified complete with collars as specified

Providing precast cement concrete1:2:4 type B-1 using 20mm graded stone aggregate as in cover slabs (for man holes etc.) set in CM 1:6. including all necessary form work.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms , moulds, mitred/stopped ends etc.

S&F Ball valves ( 20mm bore dia of pipe) high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed all as specified & directed by engr-in-charge.

Mild steel work as in handles of man hole cover slabs, rungs of man holes, straps and similar articles confirming to FE-290 Gde E-165

Providing precast cement concrete1:2:4 type B-1 using 20mm graded stone aggregate as in cover slabs (for man holes etc.) set in CM 1:6. including all necessary form work.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms , moulds, mitred/stopped ends etc.

Returning, filling, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in hard/dense soil cmplete all as specified and as direcetd by the Engineer-in-Charge.

Removing excavated material exceeding 250 m but not exceeding 500 m and depositing where directed at a level not exceeding 1.50 mtr above the starting point cmplete all as specified and as direcetd by the Engineer-in-Charge.

M&L for Soakage wells 2.4 M dia X 3.0 M effective depth) excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size

Material and labour for 10 user 2000 ltrs capacity FRP moulded Anaerobic Septic Tank for an anaerobic design in which bacteria treats waste under most favourable conditions, process effectively prevents rapid accumulation of sludge and suspended solids from passing through the system untreated with innovative engineering design of the inlet- outlet short circuit of wastewater which is prevented to ensure longg and enough retention time for effective treatment, thus the effluent dose not contain any solid or scum that could clog up the pipe line.The septic tank is buried underground, solid and liquid waste flow into it. Heavy solid waste settle to the bottom of the septic tank (known as sludge). The liquid wastes are also held in the septic tank while bacteria break down solids into liquids in an anaerobic environment, process is know as primary treatment some bacteria and viruses are adsorbed onto solid particles and held in the sludge or scum layers, allowing for limited removal of disease causing organisms at the stage. All that has to be done for fitting the tank is to fill the tank with water, connect the drain line to the inlet and outlet to the soak pit. Cover the manholes with the lids provided and tank is ready to use incl PCC 1:4:8 below foundation and vent shaft connection, including excavation, returning and filling, removal of excess soil, connection to existing sewage line incld site clearance etc.complete all as specified and directed by Eng-In-Charge.

Surface excavation n.exc 30cm depth & average 15 cm deep & getting cut in soft/loose soil all as specified and directed by Engr-in-charge.

M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified and directed by Engr-in-charge.

M&L for 75 mm thick cement concrete type D-2, 1:4:8 (40mm graded agg) as in Sub-base to floor finishes.

M&L 25mm Sand filling under floors or in foundations including watering and consolidation.

S&F Machine pressed precast concrete interlocking paver block (red and yellow colour) any shape and size confirming to IS 15658-2006 of 60 mm thickness M-40 Grade

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.

Supply, laying , jointing and testing of galvansied water tubing 25mm bore, medium grade, ISI marked including complete fitting i.e socket, bend elbow, union, nipple, Tee and other jointing materials ns per site requirement complete all as specified and dricted.

Supply, laying , jointing and testing of galvansied water tubing 20mm bore, medium grade, ISI marked including complete fitting i.e socket, bend elbow, union, nipple, Tee and other jointing materials ns per site requirement complete all as specified and dricted.

Supply and fixing of Gun metal Gate valve heavy duty of size 25mm with iron head, screwed both end for galvansied pipe line complete all as specified and dricted.

Supply and fixing of Gun metal Gate valve heavy duty of size 20mm with iron head, screwed both end for galvansied pipe line complete all as specified and dricted.

M & L for cutting the existing GI pipe line and inserting Tee for making a new connection of 25mm dia GI pipe line including complete fitting as per required at site and earth work complete all as specified and dricted.

Taking down carefully existing copper/Aluminum point wiring (light,fan, socket or power) complete including fixture and fittings such as switches, bellpushes, ceiling roses, pendents, regulators, sockets, light fitting, callbells etc removiing materials to store for keeping in safe custody or for taking credit(credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc. to match existing complete allas specified and directed

M & L for Point wiring with multi-stranded copper conductor, single core, PVC insulated and unsheathed cable, including PVC insulated unsheathed multistranded copper conductor single core cable as earth continuity conductor to common earth and connected to earth dolly, GI terminal boxes, modular frame & cover plate (suitable for modular switch/sockets) comprising the following: -

One light point controlled by one switch or one fan point controlled by one switch & fan regulator etc. with 2.5 Sq. mm (nominal area) cable & 2.5 Sq. mm (nominal area) cable as earth continuity conductor, in existing concealed conduit all as specified.

One Socket outlet three pin, 6 Amp, on the same board, with 2.5 Sq. mm (nominal area) cable & 2.5 Sq. mm (nominal area) cable as earth continuity conductor, all as specified.

One Socket outlet three pin, 6 Amp, independent, with 2.5 Sq. mm (nominal area) cable & 2.5 Sq. mm (nominal area) cable as earth continuity conductor, in existing concealed conduit all as specified.

One socket outlet three pin, 5/15 Amp, independent, with 2.5 Sq. mm (nominal area) cable & 2.5 Sq. mm (nominal area) cable as earth continuity conductor, in existing concealed conduit all as specified.

M & L for point wiring with two run of 1.5 Sqmm (nominal area) PVC insulated, unsheathed multi standed copper conductor cable FR-LSH in and including concealed PVC conduit 20mm dia medium grade ISI marked, steel terminal sunken boxes and 3 mm thick phenolic laminated sheet top cover for sunken boxes flush to surface with one run of PVC insulated unsheathed 1.5 Sqmm copper conductor cable FR-LSH as earth wire connected wire common earth dolly complete including cutting, casing the surface and then making good the same complete allas specified and directed. Note :- Switchs, sockets etc shall be measured and paid for separately under respective items of schedule.

(a) one light/ fan /bell point controlled by one 5 Amps one way switch

(b) One Socket outlet point 3 pin 5 Amps on same board with other switches

Note for serial item No 152 to 159: 1. Switch(es) & socket(s) shall be measured & paid for separately under respective item of Schedule 'A'. 2. GI boxes shall be fixed flush in position with cement mortar (1:4) complete all as directed.

S&F Switch piano flush type single pole, one way, 5/6 Amp, one module, complete all as specified.

S & F socket outlet 2 in 1, 3 pin, 5A complete all as specified.

S&F Switch modular type single pole, one way, 6 Amp, one module, complete all as specified.

S&F Switch modular type single pole one way, 16 Amp, one module, complete all as specified.

S&F Socket outlet modular type, multipurpose, 3 pin, single pole one way, 6 Amp, two module, shutter type complete all as specified.

S&F Socket outlet modular type multipurpose 3 pin, 2 in 1 single pole one way 6/16 Amp, two module, shutter type complete all as specified.

S&F Fan regulator, modular type, 5 step, high speed, two module complete all as specified.

S&F Ceiling rose, 3 terminal PVC/polycarbonate, suitable for 230 V, AC, 50 Hz supply.

S & F lamp holder PVC / polycarbonate type with back plate complete all specified.

S & F LED 5 watt lamp base B-22 complete all as specified.

S&F wall mounted extruded Aluminium/polycarbonate integrated LED batten fixture with tube 1.2 m, 20watt, 1.2 m 3000/6500K,efficacy not less than 90 lumen/watt, extruded Aluminium/polycarbonate, PC diffusor and integrated inbuilt driver complete complete including making connection complete all as specified and directed.

S&F LED light fitting 9/10W bulkhead luminaires incluing LED light, driver, holder connecting up with three core flexible copper conductor cable of suitable size complete allas specified and directed

S&F in replacement sub main two single core PVC copper conductor unsheathed wire multi stranded 6 sqmm along with earth wire 6.0 sqmm copper conductor single core wire connected by common earth in existing surface/recessed PVC/steel conduit complete all as specified.(Note :- two lengths of 6.0 sqmm cable and one length of 6.0 sqmm earth cable will be measured as one running length)

S&F in replacement sheet metal encloser double door 4 way TPN 415V ISI marked IP 43 complete with neutral and earth link and bus bar complete made out of CRCA steel sheet Factory made including blanking plate for unused module complete all as specified and directed

S&F in replacement sheet metal encloser double door 4 way SPN 240V ISI marked complete with neutral and earth link and bus bar complete made out of CRCA steel sheet Factory made including blanking plate for unused module complete all as specified and directed

S&F in replacement sheet metal encloser double door 8 way SPN 240V ISI marked complete with neutral and earth link and bus bar complete made out of CRCA steel sheet Factory made including blanking plate for unused module complete all as specified and directed

S&F in replacement single pole and neutral enclosure 240V with a two pin and earth plug and socket complete with one double pole MCB 20Amp complete all as specified and direcetd

S&F in repair MCB 6-32 Amp 240V SP 10 KA ‘C’ series complete all as specified

S&F in repair MCB 6-32 Amp 240V SP 10 KA ‘B’ series complete all as specified

S&F in repair MCB 20-32 Amp 240V SPN 10 KA ‘C’ series complete all as specified

S&F in repair MCB 40-63 Amp 240V SPN 10 KA ‘C’ series complete all as specified

S&F in repair MCB 415V 40 to 100Amp TPN 10 KA ‘C’ series complete all as specified

S&F in repair RCBO for EARTH LEAKAGE, OVERLOAD & SHORT- CIRCUIT PROTECTION 415 V 40-63A AC type 10kA Four pole 30mA ISI marked complete all as specified

Supply& Fixing LED lights fitting 1 X 20 Watt 220V AC decrative box type with driver holder including LED tube light connecting up with three core flexile copper condutor cable of suitable size from ceiling rose complete all as specifed and directed

S & F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.

S & F LED street light fitting 35 watt 230v AC outdoor type with high pressure die cast aluminium hosing and heat resistan complete with driver, lamp bracket with GI pipe impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

S & F of metallic exhaust fan of sweep 300mm along with metallic louver complete including cutting of wall, making of proper hole sufficent to fix exhaust fan and smoothing of the surface before fixing of exhaust complete all as specified and dricted.

Taking down & supplying, laying, jointing & testing, underground XLPE insulated screen PVC bedded, GI steel strip or wire armoured heavy duty LT electric cable with aluminium conductor, 1100volts grade, cross sectional area 16 sqmm 2 core

Supply and laying 40mm bore light grade galvansied for cable protection fixed to poles / laid under floor under road crossing complete all as specified and dricted.

Fixing only electric geyser of capacity 25ltr (5star rating) with 04 Nos 16mm dia 150mm long GI bolts with nuts ans washers grouted in walls complete all as specified and dricted. Note. Geyser will be provided by the E&M store free for fixing only.

Fixing only exhaust fan and connecting up including provision of cable from ceiling rose / connector to fan. Note. Exhaust fan will be provided by the E&M store free for fixing only.

Note :- 1. Taking down of all items included in quoted rates. 2. UNSV items will be deposited in AGE E&M store.

M & L for earthing with galvanized steel plate electrode 600 x 600 mm x 6 mm size directly burried in ground vertically to earth pit not less than 2.25 meter deep below normal ground level with top edge of the earth plate not less than 1.5 m below normal ground level surrounded with coal dust and common salt filling in alternative layers of 15 cm thick each connected to and including GI earth wire 4 mm dia by means of nuts, bolts, check nuts & washers etc connecting to earthing test point, main switch board and including 15 mm dia GI pipe light grade for protection of earth lead from earth plate to distribution board and 20 mm dia GI pipe medium grade connected with funnel having wire mess for watering purpose including necessary excavation and earth work, PCC (1:2:4) type B-1 (using stone aggregates) for earthing pit, 10mm thick cast iron cover with angle iron frame all as specified and shown in electrical plate No 3 of SSR Part-I and testing on completion including replacement of old unserviceable.

Supplying, laying, jointing & testing, underground XLPE insulated screen PVC bedded, GI steel strip or wire armoured heavy duty LT electric cable with aluminium conductor, 1100Volts grade, cross sectional area 25 sqmm 4 core complete all as specified

M&L for Sand cushioning in trenches for cables including watering and consolidation complete all as specfied

Supply and laying unreinforced pre cast concrete cable cover class LV type 1 flat size 250x150x50 mm for cable protection

S&F LED street light fitting 25 Watt 230V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrossion resistant complete with IP 65/66 & IK 08 protection including fixing with suitable bolt and nuts complete with making connection complete all as specified and directed.

S&F LED panel light fitting, recessed mounted, square shaped of size 2'x2' area, 36(±10%)watts efficacy not less than 90 lumen/watt, extruded Aluminium/polycarbonate, PC diffusor, module and inbuilt driver complete including making connection complete all as specified and directed.

M/s Kamal Builders (BID ID -3192487)

Easyways Enterprises (BID ID -3196331)

rkkataria and sons (BID ID -3192621)