SPECIAL REPAIRS TO CONFERENCE ROOM WALL PANELLING DAMAGED BY TERMITES OF MIG-29 UPG LAB AT SDI, PROVN OF POL SHED FOR 125 KVA DG SET AT SDI, ADDN/ALTN TO WASHROOM AND ALLIED WORKS AT SDI AND RENOVATION OF LORDS IN P-11A BLDG AT ASTE UNDER AGE B/R-I O

Amount

Dismantling boarding, any description, fixed in any position with nails and disposing off the premises, complete all as specified and directed

Supply and Fix 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on wall to make PVC frame as per specification and drawings complete all as specified and directed by Engineer-in-Charge.

Material and Labour for 40mm thick, insulated PVC wall lining of consisting of PVC insulated Panels having expanded polystyrene (EPS) stuck to 2mm thick with Single Side Prelam PVC sheet, duly fitted into wall all as per specification, complete all as specified and directed by Engineer-in-Charge.

Material and Labour for Aluminium false ceiling of grid 600 x 600mm using powder coated aluminimu anodized (15 micron) member of angles 25 x 33 x 1.4mm as main tees and cross tees of section 25 x 48 x 1.4mm thick suspended from for/steel trussed with suspended of 16 guage GI wire including 12mm thick ceiling tiles made up of mineral fibers in triangular pattern of Armstorng make Model No New Lotus RH 370 for insulation and acoustic purposes, fixed with staples in snap grid of false ceiling complete all as specified and directed by Engineer-in-Charge.

Excavation Post holes in Hard/Dense soils (or similar holes) each n.exc 0.5 cu.m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25cm, complete all as specified and directed by Engineer-in-Charge.

Material and Labour for Plain Cement Concrete (1:3:6) type C2 using 40 mm graded stone aggregate as in foundations filling and mass concrete Complete all as specified and as directed.

Supply and Fixing roof trusses (framed), trussed, purlines, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe 410-W (Gde-E-250) quality etc. complete all as specified and as directed by Engr-in-charge.

Supply and fixing Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified.

Material and labour for preparation of new steel surfaces or previously untreated surfaces, not otherwise described, exceeding 10cm width or girth and applying two coats of Synthetic enamel paint over a coat of red oxide primer, Complete all as specified.

Material and Labour for Pre-Cast Cement Concrete Block masonry with Solid blocks, in PCC 1:3:6, type C1, using 20mm graded stone aggregate exc. 10 cm in width and setting in CM (1:4), complete all as specified and as directed by Engr-in-Charge.

Material and Labour for Rendering 15mm thick on fair faces of Brick work or concrete surfaces of walls in CM (1:4) finished even and fair without using extra cement complete all as specified and as directed by Engr-in-Charge.

Material and Labour for Rendering 15mm thick on fair faces of brick work or concrete surfaces of walls in CM (1:6) finished even and fair without using extra cement complete all as specified and as directed by Engr-in-charge.

Material and Labour for preparation of newly plastered surfaces of walls and applying two coats of Cement base paint Over a coat of alkali resistant primer Complete all as specified and directed.

Material and Labour for preparation of newly plastered surfaces of wall and applying three coats of white wash Complete all as specified and directed by Engr-in-Charge.

Material and Labour for 100 mm thick Plain cement concrete (1:4:8) type D2 using 40 mm graded stone aggregate as in sub base for floors complete all as specified and directed.

Material and Labour for 50 mm thick Plain Cement Concrete (1:2:4), type B1 (using 20mm graded stone aggregate) as in top surfaces and finished with spike rolling or making impressions of expanded metal, while the concrete is green complete all as specified and directed.

Material and Labour for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as specified.

Material and Labour for Pre-Cast Cement Concrete Type B1, 1:2:4, using (20mm graded stone aggregate) as in window or door cills, lintels, exc. Set in CM 1:6, complete all as specified and as directed by Engr-in-Charge.

Supply and Fixing rolled mild steel Fe-290 (Gde E-165) framed work as in doors or gates of angles or other section with gusset plates, rails, braces, etc including provision of supply and fixing locking device, complete drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and higes or steel hanging door fittings and hanging, also fastering and fixing complete all as specified and as directed.

Supplying and Fixing steel windows or ventilators, fixed type, with glazing bars, complete all as specified and as directed by Engr-in-charge.

Supply and Fixing 4mm thick sheet glass, ordinary quality in squares n.exc.0.5 sqm in each pane including punching or drilling out old glazing pins / spring clips fixed etc including hacking out old broken glass from metal frames/wooden frames Complete all as specified and as directed by Engr-in-charge.

Dismantling Floor hearth or Wall tiling including cement mortar bedding (but not backing) and removing serviceable tiles to store and rubbish off the premises (Outside MD land) all as specified and as directed.

Material and Labour for Coloured Non Skid Ceramic tiles, size of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, 7 to 8mm thick in floors etc set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match the shade of floor tiles including Screed bed or bedding layer of mortar 15mm thick in Cement mortar (1:6) for laying floor finishes Complete including taking down old tiles all as specified and as directed.

Material and Labour for Coloured Non Skid Ceramic tiles, size of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, 7 to 8mm thick on Vertical surfaces such as Skirting/ dados, set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles including 10 mm thick rendering in Cement mortar (1:4) Complete all as specified and as directed. Complete including taking down old tiles all as specified and as directed.

Demolition of Brick work or Stone masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings dressed stonework and precast concrete articles Complete all as specified and as directed.

Removing building materials etc. (other than spoil payable under Earth work items) to a distance of 5Km or beyond the lead included in the rates, including loading, unloading and Stacking at the destination Complete all as specified and as directed by Engr-in-Charge.

Material and Labour for Aluminium Anodised snap grid frame work for false ceiling including hangers of 6mm dia GI (up to 1200mm length adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40 x3mm size 60mm long and expansion hold fasterners 12.5mm dia 40mm long complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 12mm thick perforated Particle boards/tiles for insulation and accoustic purpose 60x60cm in size fixed with nails to metal frame work or with staples on snap grid complete all as specified.

Taking down Chowkats with shutters of any description (with out taking off shutters from the frames) exc 1.5 sqm but not exc 4 Sqm each complete all as specified and directed.

Supply and Fixing Powder coated Aluminium anodised sections (Thickness or powder coating not less than 50 micron) as in frames for doors, windows and ventilators with one or more rebates including joining cleat for fixing and finished with metal paste on gaps of the surface in contact with stone masonry walls/brick walls Complete all as specified and as directed by Engr-in-Charge

Supply and fixing 12mm thick Prelaminated Particle boards prelaminated both sides with decorative choice laminations fixed with screws to timber frame work or with staples on snap grid complete all as specified.

Supply and Fixing 5 mm thick glass, superior quality exc 0.5 sqm in each pane fixed to aluminium frame works with rubber beadings etc Complete all as specified and as directed by Engr-in-charge.

Supply and Fixing brass 4 levers Mortice lock, vertical type of size 100 mm, Complete all as specified and as directed by Engr-in-Charge.

Cutting openings, through brick walls built in cement mortar for door, window and other openings or enlarging existing openinings, converting window into door openings, etc or cutting out defective brick work for under - pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks hard-core etc to store and rubbish not exc.50m, complete all as specified and as directed.

Demolition of cement concrete (Unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing rubbish outside MD land all as directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for Complete etc all as specified and as directed.

Supplying and Fixing steel ventilator, with top hung shutter including hinges, steel peg stay with glazing bars etc, complete all as specified and as directed by Engr-in-charge.

Supply and Fixing 3 mm thick figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 sqm in each pane etc Complete all as specified and as directed by Engr-in-charge.

Supply and Fixing of Solid PVC door frame of size 50mm x 47mm made out of 5mm thick single side prelaminated PVC sheet used instead of plain colour PVC sheet and edges will be painted to match with the prelaminated sheet reinforced with MS square tube all as specified and as directed.

Supply and Fixing Factory made Solid Panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site all specified and as directed.

Supply and Fixing 2nd Class hard wood plain, solid, straight chowkats & frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue painted at joints complete all as specified.

Supply and Fixing 35mm thick Factory made Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Supply and Fixing Butt hinges of 100mm size, medium weight, cold rolled mild steel, etc Complete all as specified.

Supply and Fixing 150 mm long Aluminium anodised, barrel tower bolts extruded section all as specified.

Supply and Fixing aluminium anodised alloy handles, cast type, of size 150mm complete all as specified.

Supply and Fixing 250 mm long Aluminium alloy anodised sliding door bolts hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy Complete all as specified and directed.

Supply and Fixing 140 mm (over all length of cover plate) Floor door stopper of brass body and tongue, with hard drawn steel spring, fixed all as specified and directed.

Supply and Fixing in repairs door closer hydraulically regulated designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg of aluminium (Die cast body), complete all as specified and as directed by Engr-in-charge.

Supply and Fixing in repairs Vitreous china wash down water closet pedastal pattern white pattern (excluding fixing bolts, flushing cistern and flush pipe) including plastic water closet seat, white cover, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

Supply and Fixing in repairs Vitreous china WHB white of size 550x400mm including CP waste coupling, 32mm dia PVC waste pipe, brackets including 8mm dia GI rack bolt at rear side of WHB and making good to disturbed portion in Cement Mortar 1:6 with necessary grouting and finished to match the existing surface, complete all as specified and as directed by Engr-in-charge.

Supply and Fixing in repairs PVC valveless syphonic action type low level flushing cistern of 10 ltrs capacity with inlet, ball valve, float, flush pipe and handle including brackets including flush pipe of polyethylene of low or high density or PVCV 32mm dia, for low level cistern etc, complete all as specified and as directed by Engr-in-charge.

Supply and Fixing in repairs PVC Health faucet with all accessories complete all as specified and as directed by Engr-in-charge.

Supply and Fixing in repairs 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot" or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed by Engr-in-charge.

Supply and Fixing in repairs 15 mm bore bib taps, cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engr-in-charge.

Supply and Fixing in repairs 15 mm bore bib taps, cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engr-in-charge.

Supply and Fixing in repairs 15 mm bore Stop valves, fancy type, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for union fixed of fixed all as specified and as directed by Engr-in-charge.

Supply and Fixing in repairs PVC connections 15 mm size with PTMT nuts of length 450 mm, complete all as specified and as directed by Engr-in-charge.

Supply and Fixing in repairs Toilet paper holder of vitrous china fixed to walls with chromium plated brass screws complete all as specified and as directed by Engr-in-charge.

Supply and Fixing in repairs CP soap tray fixed to walls with rubber plugs complete all as specified and as directed by Engr-in-charge.

Supply and Fixing in repairs Towel rail 600mm long PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (min wt 190 gms) complete all as specified and as directed by Engr-in-charge.

Supply and Fixing in repairs chromium plated grating with or without holes of size 100mm complete all as specified.

Supplying and laying of CPVC pipes SDR 11 with Plain CPVC SDR 11 fittings, size 16 mm outer dia, on walls/ceiling or laying in floors, including taking down old unservieable GI pipe complete all as specified and as directed by Engr-in-charge.

Supplying and laying of CPVC pipes SDR 11 with Plain CPVC SDR 11 fittings, size 20 mm outer dia, on walls/ceiling or laying in floors, including taking down old unservieable GI pipe complete all as specified and as directed by Engr-in-charge.

Supply and Fixing Low Density polyethylene pipe (LDPE) Pipe of Size 32 mm dia pressure rating 6 Kgf/cm2 fixed complete all as specified and directed.

Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces, etc. including raking out joints, hacking for key, scrubbing down with water, etc Complete and removing the rubbish off the premises to a distance n.exc.50m Complete all as specified and directed.

Material and labour for Rendering 5mm thick on fair faces of concrete surfaces of ceilings in CM (1:3) finished even and fair without using extra cement etc complete all as specified and as directed by Engr-in-charge.

Material and labour for Rendering 10mm thick on fair faces of brick work or concrete surfaces of walls in CM (1:6) finished even and fair without using extra cement etc complete all as specified and as directed by Engr-in-charge.

Material and Labour for preparation of newly plastered surfaces of Ceiling and applying three coats of white wash Complete all as specified and directed by Engr-in-Charge.

Material and Labour for preparation of newly plastered surfaces of wall and applying three coats of white wash Complete all as specified and directed by Engr-in-Charge.

Material and Labour for preparation of new plastered surfaces of wall and applying Two coats of Oil bound distemper over a coat of Chalk whiting primer Complete all as specified and as directed.

Material and Labour Pre-Cast Cement Concrete block masonry with solid blocks, in PCC 1:3:6, type C1, using 20mm graded stone aggregate exc. 10 cm in width and setting in CM (1:6), complete all as specified and as directed by Engr-in-charge.

Material and Labour for Reinforced Cement Concrete 1:2:4 Type B1 (nominal mix) using 20 mm graded stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed by Engr-in-charge.

Material and Labour for Mild steel TMT bars 5 or 8 mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips as in stirrups, spacers and binders all as specified.

Material and Labour for Form work to sides and soffits of suspended slabs such as roof slab, floor slab not exc 200mm thick with rough finished surface of concrete complete all as specified.

Supply and Fix reflexion mirror of size 80x60cm specifications all as per Model No C-8601 of Parryware or equivalent complete all as specified and directed

Material and Labour for Point wiring complete with 1.5 Sqmm Single core PVC insulated unsheathed FRLS cable 1100 volts grade with multi stranded copper conductor drawn through and including non- metallic rigid PVC conduit of 20 mm dia and all conduit accessories (surfaced/concealed in walls/ceilings/floors/roof) and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuity conductor connected to common earth dolly including mild steel terminal boxes with new 3mm thick hylem sheet top cover for housing switches, socket outlets, fan regulators with frame concealed in walls top cover fixed with brass screws and cup washers etc, all as specified and directed for One Light or Fan or 5A Socket or Call bell Point Controlled by One Switch or One 2 / 3 pin, 5 / 6 Amps Socket outlet point on Independent board controlled by one, One way 5 / 6 Amps switch Complete all as specified and as directed.

Supply and fix Flame Proof Exhaust fan, Single phase of sweep 380mm including suitable lover all as specified. Note : The rate deemed making circular opening by cutting brick wall making good to distrubed surface for fixing the Exhaust Fan.

Supply and fix in repairs LED Flame proof 1 x 20W LED tube light fixture, with luminairs, suitable inbult driver and all accessories pre-wired, including connecting up with three core twisted flexible copper conductor of suitable size all as specified and as directed. Make : Cat part No : EXTN1 LT8-16/20 of Crompton Greaves Ltd or equivalent model in Bajaj/Havells/Philips

Supply and Fix Flame proof rotary type with termination box in LM6, 16A single pole 250V all as specified and directed.

Supply and fix Sheet Metal enclosure with distribution board SPN 230V Volts 4ways Double door with suitable bus bar for provn for MCBs/Isolators, fixed to wall and making all connections all as specified. Make : Havells/Standard/MDS

Supply and fix MCB Single pole 5 to 32 Amps 230 Volts 10 KA rupturing capacity Make : Havells Cat No : DHMCBSPF006-32 or its equivalent

Supply and fix MCB Single pole and neutral 6 to 32 Amps 230 Volts 10 KA rupturing capacity Make : Havells Cat No : DHMCCSNF006-32 or its equivalent

Material and Labour for SMC box inner dimension of 450 x 375 x 200 mm with hinged door including 8mm thick bakelite sheet, for fixing MCB DB SPN 4 way, two flame proof switches, mounted on the fabricated MS Angles frame of size 25 x 25 x 3mm with two coats of synthetic paint over a coat of red oxide primer anf fixing the angle after grouting in the wall as specified and directed. Make : Sintex/Equivalent Cat No : GSJB-4537 or its equivalent

Supply and lay cable XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade, cross sectional area 2 core 10 sqmm complete all as specified and as directed.

Material and labour for earthing complete with Copper earth plate electrode 600 X 600 X 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5M below normal ground level connected to GI earth lead wire 4.0mm dia by means of nuts, bolts, check nuts and washer of GI steel and connecting to testing point including provision of test point and all as shown in electrical plate No. 3 of SSR Pt I. The work is inclusive of necessary earth work and PCC chamber in type CI (1:2:4) with 8 CTD bar reinforcement both ways at 140 mm centre to centre complete all as directed . Notes:- (i) GI earth strip beyond 7.5 M shall be measured and paid separately (ii) Ther rate include measuring earth resistance.

SAI CONSTRUCTIONS