PROVISION OF RAIN WATER SHED AT SHANKAR VIHAR UNDER AGE B/R-II OF GE (SOUTH) DELHI CANTT-10

Amount

M&L for cutting holes in brick walls in built in cement mortar or cement lime mortar exc half brick but not exc one brick and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete alll as specified and as directed.

M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges or landings, steps, cills, sunshades, shelves, lintel etc. and cutting in chases for concealed conduit wiring, etc and making good, cutting not exceeding 10 cm girth complete alll as specified and as directed.

Excavating in post holes (or similar holes) each not exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm thick, watering, and removing surplus soil to a distance not exc 50m and making good surface, work in soft/loose soil complete all as specified and as directed.

M&L for PCC 1:3:6, Type C-1, using 20mm graded stone aggregate as in mass concrete, foundation etc. complete all as specified and as directed.

S&F steel work in tubular trusses, posts, rafters, purlins including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS - 1161- 1979 gde St -240 complete all as specified and as directed.

M&L for preparation of new untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws etc. complete all as specified and as directed.

S&F for framed work as in doors, gates of angle FE-410 Gde E 250 qureed section with gusset plates complete drilled or welded to be prepared for hanging or sliding with and including either hooks and hinges complete all as specified and as directed.

Surface dressing not exc 30 cm deep and averaging 15 cm thick and getting out is soft/loose soil complete all as specified and as directed.

M&L for PCC 1:4:8, Type D-2, 40 mm graded stone aggregate, 100 mm thick as in sub-base and similar works etc. complete all as specified and as directed.

M&L for Machine pressed precast concrete interlocking paver block of any colour, shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade laid over and including 50mm thick sand cusioning and joints grouted in Cement Mortar 1:4, finished smooth complete all as specified and as directed.

S&F SS thali/crockery/plain basket of size 544x40x24cm fixed into kitchen cabinate with and including provision of channel for easy closing and opening of Design and pattern as approved by Engr-in-Charge/GE.

M&L for rotational moulded polyethylene water storage tanks of 1000 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position as specified in SSR-I including brass valve high pressure with polythne float and fly nut, tank nipple as required screw for iron pipe or brass ferrule of size 25 mm bore complete all as specified and as directed.

S&F 15mm bore GI tubes, medium grade, with all fittings and fixed to walls and ceilings or laid in floors or in concealed portion etc. complete all as specified and as directed.

S&F bib taps long body 15mm bore, chromium plated cast copper alloy, fancy screwed both ends complete all as specified and as directed.

S&F PVC connection 15mm size with brass nut of length 450 mm for hot water pipe complete all as specified and as directed.

S&F 15 mm size brass chromium plated Stop valve/Angle valve fancy type, cast copper alloy complete all as specified and as directed.

S&F 18/19mm thick Wood Plastic Composite (WPC) board, solid cabinet boxes with shelf and shutter full size fitted under or above the kitchen cooking platform and/or other platform including all necessary fittings and fixtures like nickle plated clip hinges, knobs, channels etc. complete all as specified and as directed. Note : Items like cupboard knobs, stainless steel channel, CP plate clip hinges shall be measured paid separately.

S&F CP clip on hinges (Inset) for cabinate boxes / board and other places as required including in repair complete all as specified and as directed.

S&F Magnetic catcher for wooden cupboard with complete closer mechanism claps and clips fixed with stainless steel screwing complete all as specified and as directed.

S&F 40/50mm dia cup board knobs, fixed with nuts, screws and washers of aluminium anodised complete all as specified and as directed.

S&F SS hydrauylic closer of any size suitable for kitchen cabinet shutter complete all as specified and as directed.

M&L for brick work with sub class ‘B’ old size bricks, straight or curved on plan exc 6.0m mean radius built in cement mortar 1:4 complete all as specified and as directed.

M&L for 15 mm thick rendering in CM 1:4 on fair faces of brick/ concrete surface, finished even and smooth, without using extra cement complete all as specified and as directed.

M&L for preparing new plastered or unplastered surfaces of wall/ceiling and applying exterior emulsion paint (white or tinted) over & including a coat of external wall care Putty all as per Manufacturer's instructions complete all as specified and as directed.

M&L for Non skid ceramic tiles, coloured 7 to 8 mm thick (square/ rectangular) polished, area of each tile exceeding 0.18 Sqm but not exceeding 0.38Sqm laid in floors/skirting etc. laid over and including 15mm thick screed bed in CM (1:6) , set and jointed in neat cement slurry @ 3.00 kg per Sqm and pointed in white or coloured cement to match the shade of tile complete all as specified and as directed.

Removing excavated material to a distance n.exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.

P R Constructions

JINDAL ENTERPRISES

M/S GOPAL JEE SINGH

M/S Parmod Johar

R S CONSTRUCTION CO.

HANUMAN BUILDERS

ASHUTOSH BUILDERS

J S CONSTRUCTION CO

Shivam Firetech Engineers

JAIPAL AND BROTHERS

SABHARWAL CONSTRUCTION CO.