REPAIRS AND CLEANING OF SEPTIC TANKS, SEWAGE LINE, MANHOLES, DRAINS AND CERTAIN B/R WORKS FOR AREA-III AT KAMPTEE.

Amount

Taking of existing cover of septic tanks/soak well & cleaning of septic tank/ soak well of any size/capacity by dewatering and taking out sludge in liquid mud, silt or in solid state after emptying the solid/waste water by mannual or by mechenical mean as sucking pump and trolly and removing the same to a distance not exc 50 mtr distance and put into newly excavated earth and placing back in position the removed cover complete all as specified and directed. Note:- (i) The excavation and earth work of pit in any type of soil is deemed to be included in the unit rate quoted by contractor. (ii) No extra payment shall be made for dewatering and cleaning with water which shall deemed to be included in the unit rate of this item. Net quantity of sludge as removed shall be measured and paid as quoted by the contractor.

Taking of existing cover of septic tanks/ soak well & cleaning of septic tank/ soak well of any size/capacity by mechenical sewage sucking pumping machine and transport the sludge in to a mechanical sewage carrier tank for removing the same to a distance 10 to 15 KM from defence land and placing back in position the removed cover complete all as specified and directed. Note:- Net quantity of sludge as removed shall be measured and paid quoted by the contractor.

Cleaning of blocked sewer/sewage line of any discription(SGSW/ RCC/ CI pipe) of 100mm/ 150mm/ 200mm dia or any dia at any depth by rodding or by mechenical means and well flushing the complete sewer line with water from manhole to manhole to the entire satisfaction of Engineer-in-charge with and including taking out and re-fixing of manhole covers where required complete all as specified and directed.

Taking off existing manhole cover & cleaning of manhole (any size/ depth) by dewatering and taking out rubbish/sludge etc by mannual or by mechnical means and removing the same to a distance not exc 50 mtr distance and put into newly excavated earth and placing back in position the removed cover complete all as specified and directed.

Cleaning of blocked / chocked WC (any pattern) including sewer/ sewage line of any discription (SGSW/ RCC/ CI pipe) of 100mm/ 150mm/ 200mm dia or any dia at any depth by rodding or by mechenical means and well flushing the complete sewer line with water upto first manhole to the entire satisfaction of Engineer-in-charge with and including taking out and re-fixing of manhole covers where required complete all as specified and directed.

Cleaning of blocked / chocked Nahani Trap/ floor trap including drain/ sewer/ sewage line of any discription (SGSW/ RCC/ CI pipe) of 100mm/ 150mm/ 200mm dia or any dia at any depth by rodding or by mechenical means and well flushing the complete sewer line with water upto first manhole to the entire satisfaction of Engineer-in-charge with and including taking out and re-fixing of manhole covers where required complete all as specified and directed.

Excavating in trenches, not exc 1.5m wide and not exc 1.5 m depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc 10 sqm on plan and not exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed.

Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25cm in soft/loose soil complete all as specified and directed.

Removing excavated material not exc. 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed.

Demolition of cement concrete bed in hauching and breaking up drain pipes SGSW set in cement mortar of 100mm dia complete all as specified and directed.

Demolition of cement concrete bed in hauching and breaking up drain pipes SGSW set in cement mortar of 150mm dia complete all as specified and directed.

M&L for PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in bed to drain pipe 150mm bore including packing under and hauching against the sides of pipe after they are laid and tested complete all as specified and directed.

M&L for PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in bed to drain pipe 100mm bore including packing under and hauching against the sides of pipe after they are laid and tested complete all as specified and directed.

M&L for 100mm bore SGSW drain pipe grade 'A', laid in trenches and jointed in CM (1:1) complete all as specified and directed.

M&L for 150mm bore SGSW drain pipe grade 'A', laid in trenches and jointed in CM (1:1) complete all as specified and directed.

Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed

M&L for cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for 75mm thick cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in hard standing and finished the surface even and smooth without using extra cement etc complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for precast RCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in landings, cover slabs, for manholes etc and similar articles with plain faces set in cement mortar (1:4) complete all as specified and directed.

M&L for mild steel TMT bars 8mm dia and over cut to length, bent to shapes required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed.

M&L for brick with fly ash brick old size, straight of curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and as directed.

Taking down cement or cement plaster, any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick in CM (1:6) on brick work or concrete sufaces including finished even and smooth using extra cement complete all as specified and directed.

M&L for extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement complete all as specified and directed.

M&L for PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) as in surface channel and drain finished even and smooth using extra cement complete all specified and directed.

Dismantling of cast iron pipe of 100mm dia jointed in cement mortar and taking out trenches, if required complete all as specified and directed.

S&F to wall, cast iron soil, waste and vent pipes 100mm in any length with or without ears, with cement joints complete all as specified and directed.

S&F to wall, cast iron soil, waste and vent pipes 75mm in any length with or without ears, with cement joints complete all as specified and directed.

S&F CI bends (any radius) disminishing pieces or tapers (larger bore mearsured) for 100mm dia complete all as specified and directed.

S&F CI bends (any radius) disminishing pieces or tapers (larger bore mearsured) for 75mm dia complete all as specified and directed.

S&F 100mm bore CI branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access doors complete all as specified and directed.

S&F 75mm bore CI branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access doors complete all as specified and directed.

Dismantling PVC pipes (110/75mm) jointed in cement mortar and taking out of trenches/ from walls including fittings as bends, branch pieces, traps etc complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F 110mm bore PVC (SWR) junction double, (Double T) equal or unequal complete all as specified and directed.

S&F 75mm bore PVC (SWR) junction double, (Double T) equal or unequal complete all as specified and directed.

S&F 110mm bore PVC (SWR) vent cowl complete all as specified and directed.

S&F 75mm bore PVC (SWR) vent cowl complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends any radius with access doors complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends any radius with access doors complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F 125/110mm PVC (SWR) gully trap, setting and jointing with solvent cement complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding and rubbish off the premises complete all as specified and directed.

M&L for non-skid ceramic coloured tiles 6 to 7mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exc 0.11 sqm, in floors etc, set and jointed in neat cement slurry over 15mm screed bed in CM (1:6) and pointed in white or coloured cement to to match complete all as specified and directed.

M&L for coloured glazed ceramic tiles 300 x 450 x 6 to 7mm thick, in floors etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles including rendering 10mm thick in CM (1:4) complete all as specified and directed.

S&F 15mm bore GI tubing medium grade with all fittings and fixed to wall with clamps including taking up or down existing GI tubing complete all as specified and directed.

S&F in repairs vitreous china white squatting pan "Orissa Pattern" size 580 x 440mm, with integrated foot rest (excluding flushing sistern, flush pipe etc) including making good to floor complete all as specified and directed.

S&F in repair white vitreous china wash down water closet pan (pedestal pattern) including plastic water closet seat, white/black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device including flush pipe and fixing bolts (excluding flushing cistern) etc complete all as specified and directed.

S&F in repair 10 litre capacity PVC valveless syphonic action type flushing cistern, low level, white with inlet, ball valve, float and handle including brackets complete all as specified and directed.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.23,025.00]

Devika Constructions

M/s DS Khekde

DEESHA CONSTRUCTIONS

khushal constructions

M/s B S Jain

M/s M.G. Hargunani

Bidder Name

DE PRETTY AND CO

DEESHA CONSTRUCTIONS

khushal constructions

M/s B S Jain

M/s DS Khekde

Devika Constructions

M/s M.G. Hargunani