Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.3 LAccepted-AOC | ₹9.3 L | L1 | Accepted-AOC L1 |
| 2 | L2₹9.4 L+₹1,750 (0.19%)Rejected-Finance | ₹9.4 L+₹1,750 (0.19%) | L2 | Rejected-Finance L2 |
| Sl No | Description | Qty | Unit | hitech engineering solution L1 | A.J.Enterprises L2 |
|---|---|---|---|---|---|
| 1.00 | Displacement (CC)/Engine apacity 700CC-1250 CC,Max Power :20-30BHP @ 2500rpmand above.Max Torque:500NM@ andabove.Typeof fuel:Diesel,LoadCapacity:2cu.m,Vehicleemission Norms:BS-Vl,Noofcylinderinengine:2-4cylinder,Lengthofchassis:3800mm3950mm.Widthofchassis:1500m1550mm&Groundclearance.150mm-165mm,Fuel tank capacity:Diesel-30ltrsto 40 ltrs&CNG-12-25kg,Sizeof Tyre's& No's :145R&12-5 Nos ,Wheel base:1900 mm- 2250 mm ,Gross vehiclewei:155kg90kg,Clutch:Singleplatedryfrictiondiaphragm,TransmissionSystem :Manual ,No of speed-forward gears : 4 Nos Speeds(4F+1R),Type of steering :Manual/ Power ,Speed Governors :Shall be Fitted ,Pay Load:800Kg t1000Kg,Tipper body length :2100 mm - 2200 mm, Mild steel.Tipperbodywidth :1400 mm -1500 mm&Mild Steel ,Tipper body Height:750 mm - 950 mm &Mild Steel,Sideportion (LH & RH) &rear doorsSheet thickness :2 mm & Mild Steel.Tipper Body top sheet including frame sheet thickness :1.6 mm& MildSteel,TipperBody Top Lid Sheet thickness :1.2mm & Mild Steel,TipperContainer:Tipper Container should be Fabricated with two doors on the rear sideand four doors on four top corners of the containers with hinges and locking system. A partition should be provided on themiddle of container along the vertical lenth of the body,Hydraulic cylinder make:Reputed Make,Hydraulicsystem Operate DC Power Pack System:As per IS standard ,Painting :Should be painted withone coat of Anti-corrosive epoxyprimerand two coats ofenamel paint for approved quality to ensure long lasting resistance for weatherizingand breakage. The color shade should be as per norms.Lettering:To be carried out as directed by Dept officers.Tipper body rear door :Shall be with necessary locking facility,Side safety guard:Shall be Temp Registration as per RTO requirement,NOTE:WarrantyDistance/
Year-25000KM// 12monthswhicheverisearlier | 1 | No | 8,75,000 ₹8,75,000 Lowest | 8,77,000 ₹8,77,000 |
| 2.00 | Special repair of clear water vertical wet type single phase submersible pumpset conforming to IS 8034/2002 and as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze or Cast SS impeller, brass screws and CI FG 200 grade pump bowl/diffuser with ISI mark. The pump shall be directly coupled to a continuos rated two pole suitable wet type vertical squirrel cage induction motor suitable for operation in AC single phase 230 V+/- 10 %,50 HZ +/-5 % with cable wire removing and re errecting the moter with electrical works etc complete | 1 | No | 30,000 ₹30,000 Lowest | 30,000 ₹30,000 Lowest |
| 3.00 | Supply and delivery of DOL Panel Board suitable for Single phase motor and confirming to IS 8034 with ISI marking as per standard specification. 2 HP Panel board | 1 | No | 29,250 ₹29,250 | 29,000 ₹29,000 Lowest |
Tender Value
₹9.3 L
EMD Value
₹9,350
Closing Date
29 Sept 2025, 3:00 pmClosed
Executive Officer
Sendamangalam TownPanchayat
Purhace of Four wheel Auto 1No and Compost yard Moter repair and other works in Sendamangalam Town Panchayat
2025_DTP_607903_1
3982024
Open Tender
Electrical Goods/Equipments
Works
240 days
sendamangalam Townpanchayat
as per norms
2 documents required · 2 mandatory
₹0
₹9,350
30 Oct 2025
23 Sept 2025
30 Sept 2025
23 Sept 2025
29 Sept 2025
23 Sept 2025
23 Sept 2025 - 29 Sept 2025
Amount
Displacement (CC)/Engine apacity 700CC-1250 CC,Max Power :20-30BHP @ 2500rpmand above.Max Torque:500NM@ andabove.Typeof fuel:Diesel,LoadCapacity:2cu.m,Vehicleemission Norms:BS-Vl,Noofcylinderinengine:2-4cylinder,Lengthofchassis:3800mm3950mm.Widthofchassis:1500m1550mm&Groundclearance.150mm-165mm,Fuel tank capacity:Diesel-30ltrsto 40 ltrs&CNG-12-25kg,Sizeof Tyre's& No's :145R&12-5 Nos ,Wheel base:1900 mm- 2250 mm ,Gross vehiclewei:155kg90kg,Clutch:Singleplatedryfrictiondiaphragm,TransmissionSystem :Manual ,No of speed-forward gears : 4 Nos Speeds(4F+1R),Type of steering :Manual/ Power ,Speed Governors :Shall be Fitted ,Pay Load:800Kg t1000Kg,Tipper body length :2100 mm - 2200 mm, Mild steel.Tipperbodywidth :1400 mm -1500 mm&Mild Steel ,Tipper body Height:750 mm - 950 mm &Mild Steel,Sideportion (LH & RH) &rear doorsSheet thickness :2 mm & Mild Steel.Tipper Body top sheet including frame sheet thickness :1.6 mm& MildSteel,TipperBody Top Lid Sheet thickness :1.2mm & Mild Steel,TipperContainer:Tipper Container should be Fabricated with two doors on the rear sideand four doors on four top corners of the containers with hinges and locking system. A partition should be provided on themiddle of container along the vertical lenth of the body,Hydraulic cylinder make:Reputed Make,Hydraulicsystem Operate DC Power Pack System:As per IS standard ,Painting :Should be painted withone coat of Anti-corrosive epoxyprimerand two coats ofenamel paint for approved quality to ensure long lasting resistance for weatherizingand breakage. The color shade should be as per norms.Lettering:To be carried out as directed by Dept officers.Tipper body rear door :Shall be with necessary locking facility,Side safety guard:Shall be Temp Registration as per RTO requirement,NOTE:WarrantyDistance/ Year-25000KM// 12monthswhicheverisearlier
Special repair of clear water vertical wet type single phase submersible pumpset conforming to IS 8034/2002 and as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze or Cast SS impeller, brass screws and CI FG 200 grade pump bowl/diffuser with ISI mark. The pump shall be directly coupled to a continuos rated two pole suitable wet type vertical squirrel cage induction motor suitable for operation in AC single phase 230 V+/- 10 %,50 HZ +/-5 % with cable wire removing and re errecting the moter with electrical works etc complete
Supply and delivery of DOL Panel Board suitable for Single phase motor and confirming to IS 8034 with ISI marking as per standard specification. 2 HP Panel board
A.J.Enterprises (BID ID -1474002)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .