WELCOME MAINT OF OMQ AREA INCLUDING INTERNAL WIRING MISC REPAIRS AND PAINTING IN CAMOUFLAGE PATTERN TO CERTAIN BLDGS IN TECH AREA OPS AREA AND BOUNDARY WALL ETC AT AF STN BARNALA UNDER GE (AF) HALWARA

Amount

Preparation of old decorated/painted surfaces of wall of any description and applying one coat of exterior acrylic emulsion paint in grey/light black or as approved by user using minimum 3 or 4 different approved tint/colour in camouflage pattern as approved by GE complete all as directed and specified.

Taking down cement or cement lime plaster of any description (in patches) from walls, including racking out joints hacking for key scrubbing down with water etc, complete all as specified.

M&L for 15 mm thick plaster in CM 1:4 on faces of walls, finishing the surfaces fair and even without using extra cement complete all as specified and directed.

M&L for preparing new plastered wall surfaces and applying two coats of exterior weather paint in camouflage pattern described in item No 01 above all as specified and as directed by Engineer in charge.

M&L for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), rmoving servicable tiles to store and rubbish off the premises complete all as specified and directed

M&L for vitrified ceramic tiles of size 10 mm thick dark shade, area of each tile not exceeding 0.36 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar 1:4 including taking down old screed bed complete all as specified and directed

M&L for coloured Non-Skid Joint less ceramic tiles of size 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar 1:4 including taking down old screed bed complete all as specified and directed

M&L for coloured glazed ceramic tiles of size 350mm x 250mm x 7mm/ 450mm x 350mm x 7mm thick, in dado/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 10mm thick rendering in cement mortar 1:4 including taking down old rendering complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in floor apron etc, laid, bedded and pointed in any mortar and including removal of debrish & rubbish from the site complete all as specified and directed.

M&L for 20mm thick granite stone slabs machine cut (table rubbed and polished) in steps ,jambs, pillars ,windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of slab including grinding and polishing complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillar etc. complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks straight or curved on plan exc 6M mean radius and built in CM in 1:6 complete all as specified and directed.

M&L for brickwork with sub class 'B' Bricks, straight or curved on plan to any radius in half brick thick wall built in Cement Mortar 1:4 complete all as specified and directed

M&L for 10mm thick cement plastering in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified.

M&L for 5 mm thick plaster in CM 1:3 as in ceiling, finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed

M&L for preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed

M&Lfor preparation of new plastered surfaces of walls and applying two coats of oil bound distember over a coat of primer complete all as specified and directed

M&L for preparation of new plastered wall surfaces and applying two coats of exterior Asian paint apex over one coat of primer complete all as specified.

Preparation of old decorated plastered & unplastered surfaces of walls applying one coat of distemper oil emulsion complete all as specified.

Preparation of old decorated plastered & unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smaoke soot, mould, moss and efflorescent salts trading oil and greasy spots; filling holes, crakes with cement or putty and applying one coat of white wash complete all as specified and directed

All as per item No. 22 here in above but on ceiling surfaces

M&L for complete removal of existing treatment from old treated/decorated surfaces of walls, by scraping with steel scrapers, brooming down with steel wire brush, washing with water, rubbing down and stopping of surfaces and levelling and filling holes, cracks with cement base putty to obtain smooth and regular surface using sand paper with cement base putty to receive new treatment complete all as specified (Tenderes to note that they may carry out removal manually or mechanically to the entire satisfaction of EIC before applying new treatment without any extra cost of Govt.) and applying two coat of exterior weather paint complete all as specified and directed Note: The tint/shade of the paint shall be approved by GE.

M&L for preparation of old decorated wooden surfaces exc 10 cm width or girth and applying one coat of sinthetic enamel paint complete all as specified and directed

M&L for preparation of old painted steel and iron based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

Demolition of cement concrete in floors and paving n.exc 15cm thickness (below or above ground level) complete all as specified and directed

M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregates) as in plinth protection/floor sub base etc finishing the surfaces fair and even without using extra cement complete all as specified and directed.

M&L for 40mm thick PCC 1 : 2 : 4, type B1 (using 20mm graded stone aggregate) as in floors, finish even and smooth with using extra cement complete all as specified and directed

Taking down chowkat / frames with shutter (without taking off shutter from frames), area n.exc 1.5 Sqm each complete all as specified and directed . Note : Distrubed surface of wall shall be made good by the contractor without any extra cost to the Govt.

All as per Sl item No 30 above but exceeding 1.5 Sqm but not exceeding 4 Sqm each.

S&F steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

S & F factory made box type steel window, double shutter (glazed and wire gauzed) with side hung shutters including box type hinges, steel handles fabricated type for each leaf duly welded, mild steel barrel tower bolts 150mm size (02 Nos for each leaf) duly welded, complete with glazing bars dovetailed or welded including MS fillets, including provision and welding of guard bars including one shop coat of red oxide primer over window, frame & guard bars complete all as specified and directed. Notes: - (i) Windows shall be fabricated as per HQ CE Chandigarh Zone drawing No. TD-219 Sh 1/3 to 3/3 dated 02 Jan 2007 with one amendment dated 22 Jun 07 in Sh 1/3 and dt 15 Jun 07 in sh 2/3 & 3/3 and these drgs may be referred from GE office or from the office of CWE (AF) Ambala. (ii) Glazing & Wire cloth shall be measured and paid separately. (iii) Guard bars shall be mearued and paid seperately as supply only. (iv) The term double shutter stated is meant for providing glazed shutter as well as wire gauged shutter on outside & inside of the frame respectively.

Supply only framed work such as grills, gratings, guard bars with ends of bars shouldered and/or riveted or forged into spikes and similar work conforming to Fe 290 Gde E-165

S&F factory made pressed steel frames made out from 1.25mm thick steel sheet for doors of size 105x60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.and including treated with tar or coal tar black paint on steel surfaces in contact/embeded in concrete or masonary work including filling hollow portion of frame in PCC 1:3:6 type C-2 using 20mm graded stone aggregates complete all as specified and directed.

All as per Sl item No 35 above but of size 125x60mm

M&L for block boards 12 mm thick, grade 1 quality, exterior grade, commercial type, fixed with screws to timber frame-work complete all as specified and directed

M&L for 6mm thick external teak wood lipping fixed to block board or veneered particle board fixed with nails complete all as specified and directed.

S&F 2nd class hardwood panelled shutter, 35 mm thick, (two numbers of panels) panels inserted of 12 mm ply board or/veneered particle board. The size of rails and stile as per IS : 1003 (Part I) complete all as specified and directed

S&F 2nd class hardwood factory made glazed skelton shutter, 35 mm thick, open rebated, without sash bars all as specified in clause 8.24(a) of SSR 01, section 8, for doors complete all as specified and directed.

S&F PVC door frame of size 50x47mm made out of 5mm wood grain printed PVC sheet, reinforced with MS square tube complete all as specified and directed

S&F 30mm thick PVC factory made moulded door shutter as IS-4020 made from MS tube of top and bottom rods.MS frame shall be covered with heat maulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail ,lock rail & bottom rail on plain side & as gap insert for top and bottom rail. Pannelling of plain colour PVC sheet to be fitted in MS frame welded /sealed to the stiles & rails with suitable PVC sheet bedding and jointed together with solvent cement as per specification and drawings.

S&F small fitting of 1st class hard wood any shape not exceeding 200 cucm, as for door stopper, cleat etc. complete all as specified and directed

S&F cold rolled mild steel medium weight butt hinges 100mm size complete all as specified and directed.

S&F aluminium anodised, barrel tower bolts of extruded section with length of bolt 200 mm and fixed complete all as specified and directed

S&F 300mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed

S&F Aluminium anodised Cast type handle of 150mm size.

S&F Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

All as per Sl item No 49 above but fixed in repairs

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane complete all as specified and directed.

Hacking out old broken glass any size, thickness from wooden or steel frames complete all as specified and directed

M&L for preparation of new steel surfaces exc 10cm width or girth and applying 2 coats of synthetic enamel paint over a coat of primer red oxide complete all as specified and directed

M&L for preparation of new wooden surfaces exc 10cm width or girth and applying 2 coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed

Taking down or up, 15mm bore steel tubing and connections and removing to store yard complete all as specified and directed.

All as per item No. 55 above but 20mm bore.

S&F steel water tubing medium grade 15mm bore galvanized with all fittings and fixed to walls and ceiling or laid in floors including cutting chases where required complete all as specified.

All as per item No. 57 above but 20mm bore

S&F in repairs chromium plated bib tap cast copper alloy with crutch or butter fly handle screwed down screwed for iron pipe and fixed to 15mm bore pipe fixed as complete all as specified and directed.

S&F in repairs 15mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.

S&F in repairs stop valve cast copper alloy fancy type 15mm bore with long shank and cup (concealed type) screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe complete all as specified and directed.

S&F in repair 15mm bore angle cock fancy type chromium plated complete all as specified and directed.

S&F towel rail, 19mm dia brass chromium plated, 600mm long with fancy type brass chromium plated brackets on both sides and fixed with steel screws and wooden/rawl plugs as in repair complete all as specified.

S&F 125mm dia CP brass shower rose with swivel joints, any colour including shower arm 15mm dia, 195mm long with bend of 45 degree with flange of CP brass as in repair complete all as specified.

S&F Mild steel curtain rod powder coated with fixing side brackets, end cups, rings @ 10 Nos per running metre and fixed with PVC rawl plugs & steel screws as in repairs complete all as specified.

S&F in repairs, soap dish any type fixed to plugs with chromium plated brass screws complete all as specified and directed

S&F in repairs, sheet glass shelf assembly for corners/WHB consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

Dismantling of water tanks and removing to store exc 250ltr & n exc 500 ltr.

S&F rotational moulded water storage tank (cylinderical vertical with closed top, double layer wall construction, hoisted and fixed in position capacity 500 ltrs with 20mm bore brass ball/ float valve complete all as specified and directed.

S&F in repairs vitreous china ware water closet Orissa pattern of size 580mm X 440mm including 'P' or 'S' trap connecting to trap and to flushing pipe anti syphonage pipe etc complete with foot rest, jointed with epoxy resin to glazed trap including provision of lime concrete bedding complete all as specified.

S&F in repairs China ware coloured EWC complete set including flushing cistern with internal fitting, coloured PVC seat cover, bend including chromium plated brass jet faucet suitable for EWC with PVC chord and brass nozzle and fixed to pipe complete all as specified and directed.

S&F PVC low level flushing cistern of capacity 10 ltrs including PVC flush pipe fixed in repairs for squatting pan fixed to wall, ISI marked complete with brackets and accessories fixed in lieu of CI high level cistern after removing the same including GI flush pipe and making good to disturbed portion matching with existing surface complete all as specified and directed..

S&F PVC low level flushing cistern of capacity 10 ltrs fixed in repairs complete all as specified and directed.

S&F in replacement sink with drainage board made of stainless steel 1mm thick for kitchen with plug, washer and waste, including bedding in cement motor to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460 mm,. bowl size 410mmx330mmx 160mm fixed including waste pipe and waste coupling complete all as specified and directed..

S&F in replacement plate rack of stainless steel , 1mm thick for kitchen or labotary, overall size 750x900x250 mm, fixed with plugs and washers on wall complete all as specified and directed.

S&F in replacement PVC bath room cabinet of size 40cmx50cm complete as all as specified.

Demolition/breaking up or down PVC /Ac/CI/Cement drain pipe any size fixed in any position complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes any length and in any position with clamps in wall complete all as specified and directed

S&F 110 mm bore PVC (SWR) pipes any length and in any position with clamps in wall complete all as specified and directed

S&F PVC (SWR) bends 75 mm bore

S&F PVC (SWR) bends 110 mm bore

M&L for Cleaning and removing all scale, sludge mud algee, and dirt from water storage tank exc 250 and not exc 500 ltrs capacity and from mouths of circulating pipes etc. including writing in words with synthetic enamel paint cleaned on (date ………….) complete all as specified and directed

S&F in replacement 15mm bore central hole wash basin mixer (hot and cold) with long flexible pipe of bore 15mm, complete all as specified and directed

S&F in repairs vitreous china WHB, white, flat back size 550x400mm including cutting for and pinning in ends of bracket or erecting stand with and including angle iron brackets, duly painted with two coats of synthetic enamel paint over one coat red oxide zinc chrome primer cast copper alloy capastan head C.P brass pillar tap fency type 01 No 15mm bore, CP brass waste coupling 32mm dia, PVC waste pipe 32mm dia, CP grating and 15mm bore PVC connection 600mm long high pressure with PTMT nut complete all as specified & directed.

Providing and injecting chemical emulsion for post constructional antitermite treatment of soil along the external wall below concrete or masonry apron using emulsion @ 2.25 liters per linear metre, 150mm part including drilling and plugging 6mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified.

Providing and injecting chemical emulsion for post constructional antitermite treatment of soil under existing floor using emulsion @ 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and directed.

Providing and injecting chemical emulsion (in oil or kerosene based solution) for post constructional antitermite treatment of wood work using emulsion @ 0.5 liters per hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified.

S&F alluminium anodised powder coated frame, grills of any design for doors, windows, ventilator with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F anodised aluminium powder coated door shutters, aluminium section weighing 0.55 kg/m with and including necessary joining cleats, glazing clips, rubber neopene packing, extruded anodised aluminium alloy fabricated type handles of size 150mm 2 Nos is each door, stainless steel hinges anodised aluminium snap beading for fixing glass panes /other filling material in panels, screws etc complete all as specified and directed. Note :- Glass panes / other filling materials in panels shall be masured and paid separately.

S&Faluminium powder coated window and ventilator with side hung shutters with sash bars section weight 0.55 kg/RM, necessary jointing cleat glazing,clip,handles CP hinges, tower bolts etc packing,anodised snap beading, screws complete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor, over all length of cover plate 150mm complete all as specified and directed.

S&F in repairs aluminium (extruded section body) door closer hydraulically regulated, designation No 3 universal type suitable for door shutter of 851 to 1000mm in width and fixed complete all as specified and directed.

S&F in repairs 100mm, 4 levers, aluminium mortice lock vertical type complete all as specified and directed.

All as per Sl item No 95 above but exc 0.5 Sqm in each pane

S&F in repairs PVC health faucet with tube 1 mtr length, and hook wall mounted complete all asspecified and directed. Make : Prayag Cat Part No BEA-84 or equivalent as approved by GE.

S&F 32mm/40mm bore waste pipe for sink/wash basin, flexible and expandable length in repair complete all as specified.

S&F 0.9mm thick decorative laminates type I , or surface finish, colour and pattern as approved fixed with adhesive/nails on wooden surfaces complete all as specified and directed

Taking down copper/aluminium point wiring (light, bell, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials from site complete all as specified and directed

Point wiring concealed type for one light point controlled by one 6 Amp one way switch complete with 1.5 sqmm PVC insulated unsheathed and multi stranded FRLS copper conductor PVC conduit 20 mm bore having 2 mm wall thickness with all conduit accessories including continuous 1.5 sqmm copper conductor, stranded (green colour, earth), PVC insulated unsheathed earth wire to common earth and connected to earth dolly to be terminated in and including suitable size module boxes/ flush type for housing of module/ flush type (PT) switches/sockets etc complete all as specified and directed Note : Unit rates quoted by contractor shall be deemed to included for cutting chases in walls and making good in cement morter (1:3) and finishing the surface to match with exisiting surface using putty and distemper complete all as specified and directed

All as per Sl item No 101 above but for one bell/ buzzer point controlled by one push button on the independent with cables 1.5 sq.mm size

All as per Sl item No 101 above but for one celing/Exhaust fan point controlled by one 6 Amps one-way switch and regulator.

All as per Sl item No 101 above but for one 5 pin 6 Amps switch socket outlet point on independent board

All as per Sl item No 101 above but for one 5 pin 6 Amps switch socket outlet point on same board .

All as per item No. 101 here in before but 4 Sqmm copper conductor wiring with 4.0 Sqmm copper conductor as earth continuity for 15/16 Amps socket out let on independent board.

Supply and fix switch modular type single pole one way 6 Amps including suitable size of module cover with frame.

Supply and fix switch modular type single pole one way 16 Amps including suitable size of module cover with frame etc.

Supply and fix socket outlet modular type 5 pin , 6 Amps including suitable size of module cover with frame.

Supply and fix socket outlet 6A /16 Amp 3 pin suitable size of cover with frame.

Supply and fixing Modular Bell push 6A 1 module

S&F Fan step regulator 120W, 2 module with box, cover and frame as specified.

Supply & Fixing Bell Multi Music type

Supply and fixing of Ceiling rose, 3 phase polycarbonate, isolated body as specified and directed.

S & F energy efficient LED bulkhead 10 watt fittings all as specified and directed.

S&F Sheet metal enclosures factory made, double door for DBs, single pole and neutral, 240 volts, 12 ways fixed on walls, including connecting both incoming and outgoing cable termination with proper taping, lagging, testing and commissioning, complete all as specified.

M&L for wiring for circuit/submain wiring in PVC conduit along with earth wire with 2x6.00Sqmm+1x6.00 Sqmm as earth wire of FRLS PVC insulated copper conductor single core cable (ISI marked) including taking down old wiring, complete all as specified and directed.

Wiring for circuit/submain wiring in PVC Conduit along with earth wire with 2x10.0 Sqmm+1x10.0Sqmm as earth wire of FRLS PVC insulated copper conductor single core cable (ISI marked) including taking down old wiring, complete all as specified and directed.

S&F white cover plate with frame ,1 module.

S&F white cover plate with frame , 2 module.

S&F white cover plate with frame , 3 module.

S&F white cover plate with frame , 4 module.

S&F white cover plate with frame , 6 module.

S&F white cover plate with frame , 8 module.

M&L for earthing in repairs complete with galvanized steel earth plate electrode 60cmx 60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized iron wire 4.0mm dia by means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 15mm bore including GI light grade water pipe 20mm dia with funnel all as shown in electric plate No. 03 of 2009 SSR Pt-I and testing on complete including earth work in any type of soil, PCC 1:2:4 type B-0 as in earth pit and cover 40mm thick reinforced with XPM (weight not less than 4.0Kg/Sqm) and frame of angle iron 25x25x3mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, common salt, charcoal and testing on completion, all as specified and directed.

S&F LED lights fitting 1x 20W, 4 ft , 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose fixed in repairs complete all as specified and directed.

S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size fixed in repairs complete all as specified and directed

Supply and fixing amp rating 240V, 10KA 'B' curve miniature circuit breaker (MCB) of SPN 40 to 63 A current carrying capacity in the MCB DB complete with connection testing andcommissioning in repairs complete all as specified and directed

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB complete with connection testing and commissioning in repairs complete all as specified and directed

S&F in repairs LED bldg security light fitting 18 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp, GI bracket 25 mm dia with suitable fixing clamp and with impact and corrosion resistant including thermal management in multiple optics complete all specified and directed.

S&F in repairs POLYCABONATE THERMOPLASTIC ENCLOSURES (meter box) which should be UV resistance in accordance with IEC61439-1, clause 10.2.4. the board should be anti-acid & anti corrosive. Degree of protection against mechanical load should be IK08 (5 Joule) in accordance with IEC 62262. The manufacturer of board shall submit a copy of CPRI TEST REPORT IN POLYCARBONATE OF DEGREE OF INGRESS PROTECTION IP65 IN ACCORDANCE WITH IEC 60529. The gasket should be internally embedded made of polyurethane. The box should have glow wire test 9600 C in accordance with 60695-2-11 (flame retardant and self-extinguishing) complete all as specified and directed

Taking down shutters of any description exceeding 1.00 sqm but not exc 2.00 sqm each complete all as specified and directed

S K BANSAL AND CO.

SANGAM ENGINEERS