ADDN ALTN TO BLDG NO P 17 OLD HANGER AND ANNEX ROOM AT CABS BANGALORE

Amount

M&L for 2mm thick epoxy resin based floor toppIng after priming the surface solvent base epoxy resin primer designed for maximum absorption and adhesion as per manufrature specification including prepartion of floor by wire brushing or light grit blasting to complete removal of existing epoxy, dust and cleaning the same to acheive machanical key between the floor and coating system and applying epoxy putty mixed with suitable fillers to cover the worn out areas complete all as specified and directed Note :- (a) Floor topping shall be Nitoflor SL 2000 of Mls FOSROC/MASTERTOP TM 1215 PLUS of BASF or equivalent in CIPY. (b) Primer shall be Nitoprime 25 of M/s FOSROC or equivalent in BASF/CIPY. (c) Epoxy putty shall be Nitoflor FC 140/150 of M/s FOSROC or equivalent in BASF/CIPY

Material and Labour for providing the sealant (pouring grade) in the existing 20mm wide & 20mm deep groove/joint after preparation of joint as per manufacture instructions along with application of primer as per manufacture instructions complete all as specified and directed (a) Thioflex 600 shall be of MAKE M/s FOSROC/ MASTERFLEX TM 700i of BASF or equivalent in CIPY. (b) Primer 7E shall be of MAKE M/s FOSROC or equivalent in BASF/CIPY. Note :- Application of Epoxy and sealant shall be carried out by authorised applicator of manufacturer.

S&F Mild steel screw bolts 5 to 10 mm dia neck (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5 cm long complete all as specified and directed

Dismantling of structural steel work including roof truss complete all as specified and directed

Supply and fix Rolled mild steel in Joist, channel, angle, or tee sections, in roof truss,angle frame work for bird proofing fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. Within 20mm of the length indicated) Fe 410-W (Gde- E- 250) quality-A complete all as specified and directed. Note: For working at a height upto 20m, necessary scaffolding as required shall be included in the rate quoted.

Material and labour for preparation of new steel surfaces and applying two coats of synthetic enamel painting over a coat of red oxide primer on steel surfaces exceeding 10cm width or girth at height of 20. 00 mtr complete all as specified and directed

Taking down door/window frame with shutters (without taking off shutters from the frames n exe 1.5 sqm).complete all as specified and directed

Taking down door frame with shutters (without taking off shutters from the frames exc 1.5 sqm and n exc 4.00 sqm) complete all as specified and directed

S & F factory made pressed steel made out of mild steel black sheet of 1.25 mm thick of profile 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges (100 and 50mm), lock strike plate etc. Complete complete including one shop coat of priming and threshold of 12mm dia round bar 1 nos welded at bottom of frame, complete all as specified and directed

Material and labour 30 mm thick flush shutter solid core construction with venner faced, block board core and on both the faces are covered with decorative face veneer with tipping/frame to match. Bonding shall be with formaldehyde glue to ensure stringer bonding and longer life of door complete all as specified and as directed.

M&L Cutting holes in brick walls built in cement mortar for inserting holdfast and making good the dismantled portion in cement 1:4 or cement concrete 1:2:4 type B1 all as specified and as directed depth of embeded portion of holdfasts or lugs measured from the face of the lamb into wall exc half brick but not exc one brick complete all as specified and as directed.

M&L 18/19mm thick Block boards, grade 2 quality, interior grade, commercial type decorative face veneers on both face, fixed with screws to timber frame-work complete all as specified and directed

S & F Continuous (piano) hinges, 40 mm flap width mild steel, bright finish or electrogalvanised complete all as specified and directed

M&L 6 mm thick Plywood, grade BWR,type BB, fixed with screws to timber frame- work as in leveling under wall panelling complete all as specified and directed

M & L for preparation of new wooden surfaces exc 10 cm width and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed

S&F, Prelaminated particle board 12 mm thick, exterior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, as in aluminium door and partion complete all as specified and directed.

S&F factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing on page No 149 of SSR Part -II complete all as specified and directed

S&F, factory made solid panel PVC moulded door shutter 30 mm thick (style) consisting of frame made out of MS square tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip 20 mm wide stuck inside with solvent cement for styles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail, bottom rail panelling of plain colour PVC sheet to be fitted in MS frame welded / sealed to the styles and rails with suitable sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per specification drawing of Page No 147 of SSR Part-II complete all as specified and directed.

S & F 100 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed

S & F 100 mm long aluminium alloy handle febricated of extruded section complete all as specified and directed

S&F black/golden colour solar control film 50micron reflective type sticked to glass panes as per instruction of manufacturer including taking down existing damaged films complete all as specified and directed

Supply and fix 100 mm size Butt hinges, medium weight cold rolled mild steel complete all as specified and as directed.

Supply and fix 150 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fix 150mm long extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed

Supply and fix 250mm long extruded aluminium sliding bolt aldrop bolt, fabricated type, anodized complete all as specified and as directed

S & F for aluminium anodised floor door sloper for aluminium ally body and tongue anodized with hard drawn steel sping fixed in floor 150 mm long complete all as specified and directed

Hacking out old brocken glass of any thickness size quality or description from wooden frame or stonc concrete or brick complete all as specified and directed

M&L Rough cast wire glass, 6.4mm thick and glazing with oil putty in square n exe 0 5 Sqm complete all as specified and directed.

S & F sheet glass 3mm thick foF Window ordinary quality frosted on one side in exc 0.5 Sqm in each pan with rubber beading as in doors and partion complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing servicable tiles to store and rubbish off the premises complete all as specified and directed

M&L Vitrified ceramic tiles of size 9-10 mm thick Double charged light shade, area of each tile not exceeding 0.36 sqm in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

M&L Vitrified ceramic tiles of size 9-10 mm thick Double charged llght shade, area of each tile not exceeding 0.36 sqm, in skirting. set and jointed in neat cement slurry and pointed in white or coloured cement to match includlng 10mm thick screed plaster in cement mortar 1:4 complete all as specified and directed

M&L coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.20 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6.complete all as specified and directed

Material and labour for glazed coloured ceramic tiles in vertical surfaces for wall tiles of size 600 x 450 x 7 mm thick as in dados, set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles with joint free including 10mm thick rendring in CM 1:4 complete all as specified and directed.

M&L for roof treatment all as specified as per below : (a) M&L for chip out the existing loosed bitumen / bitumen membrane completely reach up mother slab, clean the surface throughly to make it smooth and free of any foreign material, repairs the concrete wherever damaged using PMM HS repair, repairing of construction joints / cracks by chasing with cutting machine and fill the same with polymerized mortar in HS repair, coping of 75 x 75mm should be made at the junction of wall and raft slab using polymerized cement mortar 1:4 admixed with advanced latex plus. (b) Applying one coat of 50% diluted self priming PU roof coat. Allow to dry bond coat for 4-6 hours before applying PU coat and surface to be cleaned before applying PU coat. (c) Applying two coats of single component, cold applied, water based polyurethane modified acrylic dispersion with highly elastic and UV resistant water proofing treatment to the roof as per list of makes at 0.6 kg/Sqm for each coat without dilution confirming to ASTM D 6083-97a (Standard Specification for Liquid Applied Acrylic Coating used in roofing) each coat should allow to dry 4-6 hours. The component shall have a density of 1.25 to 1.3kg/per Litre, having tensile strength of 1.5N/mm2, having elongation of 350% with solid content not less than 60% in 2 coats, SRI value should be more than 100. The quoted rate shall include surface preparation, repair the crack in mother slab by chasing with cutting machine and fill the same with polymerized mortar in CM 1:4 admixed with latex agent of reputed manufacture, making coping at junction, bore packing, treatment of construction joints completely as per manufacturers specification and direction of the Engineer-in-Charge. Note: The above treatment shall be got carried out by the authorised applicator of the manufacturer approved by the GE.

Supply only integral water proofing compound

M&L for crack treatment by cutting open cracks and cleaning it from dirt, loose materials etc and filling with polyurethane based sealent with and including application of PU based primer all as directed by GE/EIC

Dismantling boarding, any description, fixed in any position with screw complete all as specified and directed

Supply and fixing of armstrong ceiling system with fine fissured edge tiles haVing humidity resistance (RH) of 95%, NRC 0.34 light reflectance approx 84% Thermal conductivity K=0.052 - 0.057. W/mk colour white fire performance of class-I as per BS 476 part 6 & 7 in module size of 600 x 600 x 12 mm thick suitable ofr green building appliation with recycled content of 38-4 % with Armstrong silhouette profile exposed grid system with 15 mm white flanges incorporating 6 mm central reveal in white/black colour. Silhoutte, main runners & cross tees to have mitred ends & birdsmouth notches to provide mitred cruciform junctions. The Tee sections have a galvanising of 170 gms per sqm & passed through 500 hrs of salt tesL. The main runner spaced at 1200 mm c/c should be securely fixe to the structural soffit using Armstrong suspension system at 1200 mm maximum c/c. The first/last Armstron suspension system at the end of each main runner should not be greater than 450 mm from adjacent wall Cross Tees 1200 mm long should be interlocked between main runners at 600 mm G/c to form 1200 x 600 mm module. 600 x 600 mm module is formed by fiking 600 mm long flush fittng cross Tees, Perimeter trim consist of Armstron wall angles of size 3000 x 19 x 19 mm secured to walls screws at 450 mm c/c complete all as specified and directed.

Preparaton of old painted steel and iron based surfaces of any description over 10cm width of girth and applying one coat of synthetic enamel paint complete all as specified. Note: The height of the building is upto 20 m. and rate quoted is inclusive of cost of scaffolding and safety materials.

Taking down UPVC (SWR) pipes any dia complete all as specified and directed

Supply and fix UPVC pipes (SCH-40) 150 mm bore rainwater pipes including bend, shoe etc complete bore laid in floor trenches / wall (height upto 20 mtr) including all necessary scaffolding complete all as specified and directed.

Supply and fix 110 mm dia bore PVC (SWR) pipes single socketed in any length with rubber nng joints fixed to walls complete all as specified and directed.

Supply and fix 75 mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed

Supply and fix PVC (SWR) bends any radius 75 mm dia of bore complete all as specified and directed

Supply and fix PVC (SWR) bends any radius 110 mm dia of bore complete all as specified and directed

Supply and fix PVC (SWR) floor trap 75 mm dia out let with grating plain including jointing with solvent cement complete all as specified and directed

Supply and fix PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and directed

S & F for vitreous china EWC white or colour (excluding fixing bolts, flushing cistern and flush pipe including connection to trap and to flushing pipe anti syphonage pipe etc complete all as specified and directed including making good to floor in repairs

Supply only plastic water closet seat ,white closed pattern with flat bottom and cover and mild steel chromium plaled or aluminised highing device, in repair complete all as specified and directed

Supply and fixing vitreous china squatting pan 'Orissa' pattern size 580 x 440 mm white with integral foot rest (excluding flushing cistern and flush etc),in repair complete all as specified and directed

S & F for Vitreous china wash basin angle back (Oval type) size 600 x 480 mm white excluding taps waste chain and plug and porcelain stopper including cutting for and pinning in ends of brakets or eracting stand , waste pipe in repair complete all as specified and directed

S & F for pillar taps, cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered Hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed,in repair complete all as specified and directed

Supply and fix PVC valveless, symphonic action type, flushing cistern low level, white with inlet ball valve float and valve float and handle including brackets 10 Itrs capacity in repair complete all as specified and directed

Supply and fix flush pipe of polyethylene of high density of PVC 32 mm for low level cistern, in repair complete all as specified and directed

Supply and fix vitreous china urinals, size 635 x 395 x 420mm,white, half stall type, in repair complete all as specified and directed

Supply and fix brass chromium plated bottle traps for wash basins with inlet and outlet screwed (or pipe or connections including necessary packing union cap and fixed 32 mm, in repair complete all as specified and directed

Supply and fix PVC connection 15 mm size with PTMT nuts of length 600 mm in repair complete all as specified and directed

Supply and fix for push tap any colour high pressure of PTMT screwed for iron pipe and fixed suitable for urinals (Minimum weight 15 mm - 50 gms) 15 mm dia in repair complete all as specified and directed

Supply and fix for urinal spreader of chromium plated fiting with 15 mm dia pipe.in repair complete all as specified and directed

Supply and fix stop valves, cast copper alloy, screwed down, high pressure with crutch or butter fly handle screwed both ends for iron pipe, fancy type chromium plated, 15 mm size, in repair complete all as specified and directed

Supply and fix Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed

Supply and fix soap dispenser chromium plated complete all as specified and directed Make: Jaquar CAT No 1137 or equivalent as per list of Makes.

Supply and fixing in position CP recessed type toilet paper roll holder of size 150 x 150mm with necessary CP screws and washers fixed to wall fixed in repair complete all as specified and directed

Supply and fixed in repair angle cock, fancy type, chromium plated with long shank and cup 15 mm dia, without flange complete all as specified and directed

S&F Bass chromium plated brass tubular towel rail 20mm dia, D type 60cm long between flange as in repairs complete all as specified and directed

Dismantling of water tanks and removing to store 1000 ltrs complete all as specified and directed

S & F 1000 Itr rotational moulded polyethylene water storage tanks (cylindrical complete all as specified and directed

Taking down steel tubing /cpvc and connections 20 mm dia complete all as specified and directed

All as per item no. 70 above but for 25mm dia complete all as specified and directed

Supply and fix of CPVC pipes SDR 11 & Plain CPVC SDR 11 with all fitings to walls or laid in floors 20 mm bore outer dia complete all as specified and as directed.

Supply and fix of CPVC pipes SDR 11 & Plain CPVC SOR 11 with all fittings to walls or laid in floors 25 mm outer dia bore complete all as specified and directed

S & F 25 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm- 142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms) complete all as specified and directed

S & F 25 mm gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified and directed

S & F fancy type 15 mm bib taps, cast copper ally with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed

Demolition of brick or stone masonary built in cement mortar complete all as specified and directed

M&L for pre-cast cement concrete, Type C1 (PCC 1:3:6), block masonry with solid blocks, exe 10 cm in width and setting mortar in CM 1:6, complete all as specified and directed

Taking down cement plaster on brick or concrete walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed

M&L Rendering 15 mm thick Cm 1:4 on brickwork / stone masonry wall finished even and smooth without using extra cement.complete all as specified and directed

M & L for rendering 10 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces. complete all as specified and directed

M&L preparation of new plastered surfaces of wall and applying 2mm thick wall care putty in two layers to receive the good & smooth surfaces and applying two coats of distemper oil emulsion paint over a coat of primer.complete all as specified and directed

M&L applying 2 coats of exterior emulsion Finishing walls with Acrylic Smooth exterior paint of required shade applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) on new / old plastered surface of wall including cornices, plasters etc all as specified and directed.

M&L complete removal of existing treatment and preparation of old plastered surfaces of wall and applying 2mm thick wall care putty in two layers to receive the good & smooth surfaces and applying two coats of distemper oil emulsion paint over a coat of primer.(ht Upto 20 Mtr including all necessary scaffolding) complete all as specified and directed

M&L complete removal of existing treatment and preparation of old plastered surfaces of ceiling and applying 1.5 mm thick wall care putty in two layers to receive the good & smooth surfaces and applying two coats of distemper oil emulsion paint over a coat of primer.(ht Upto 20 Mtr including all necessary scaffolding) complete all as specified and directed

Writing letters or figures (Block. Roman, Italic or Indian) n exc. 1500 mm high on galvalume sheet / ACP white or golden yellow, with radium reflective paint all as specified and directed. NOTE: Work to be executed to the height of n exc. 20m.

M&L Granite (of any type) work 18-20 mm thick (table rubbed and polished)in staie case steps, jambs, pillars, windowcills, cooking platforms and like in including 15mm thick cement mortar 1:4 pointing in white cement (1:2) using marble dust with admixture of pigment to match complete all as specified and directed.

M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed

M&L Solid PVC lining/panelling consist of 5mm thick wood grain printed pvc sheet inclusive of solvent and fixing at site on pvc frame complete all as specified and directed.

M&L 5mm thick pvc sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make pvc frame as per specification and drawing.complete all as specified and directed

S & F for venetian blinds verical type 100 mm width with approved fabric and powder coated aluminium fittings such as top rails metal weight nylon button loops etc to match with the top rail metal base complete all as specified including dismantling unserviing one.

S&F Anodised aluminium powder coated frame for doors window,partition and ventilatore with one or more rebates including joining cleat forfixing etc. complete all as specified

S & F sheet glass 5.5 mm thick ordinary quality frosted on one side in exc 0.5 Sqm in each pan with rubber beading as in doors and partion.complete all as specified and directed

S &F chequred shaped nets with 4mm dia galvanised steel wire, 50X50mm mesh,over angle iron frame made up into mattresses or ages, lapped, wired and laid in position, including necessary welding in all respects complete all as specified and directed Note :- The height of the building is more than 15 m, should include scaffolding and safety materials.

Taking down copper/aluminium point wiring (light, fan, bell, socket or power sockets ) complete of any type, including fixture and light fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc as directed.

M & L for Point wiring complete with single core copper conductor cable of size 1.5 sqmm PVC insulated, unsheathed,multistranded FRLS cable, 1100 volts grade conforming to IS 694 drawn through in and including non metallic rigid PVC conduit 25 mm dia medium grade and conduit fittings concealed in walls/ floors/ ceiling etc except in roof/ beams/ columns with and including GI metal flush boxes of suitable size and modular plate with frame for mounting modular type switches, sockets, regulators and and blank plates as required including single core copper conductor cable of size 1.5 sqmm PVC insulated, unsheathed, multistranded FRLS cable green in colour as continuous earth continuity conductor green in colour and connecting to common earth dolly and cutting chases to the walls/ floors etc and making good to match with existing surface after work complete all as specified and directed.

One light point controlled by one, one way switch.

One fan point controlled by one, one way switch

One 5 pin socket outlet point 5 Amps controlled by one switch on independent board.

One bell point controlled by one bell push on independent board.

One light point controlled by two, two way switches.

All as per item No 96 above, but with 4 sqmm PVC insulated FRLS copper conductor and 4 sqmm PVC insulated FRLS copper conductor as earth wire for one 6 pin15 Amps socket outlet point on independent board

S&F modular switch 6 Amp, 1 module, single pole, one way, 230 volts all as specified & directed.

S&F modular switch 6 Amp, one module, single pole, two-way, 230volts all as specified & directed.

S&F modular bell push 6 Amps, one module, 230 volts all as specified & directed.

S&F call bell ding-dong type, AC, 230 volts, single pole including PVC box all as specified & directed

S&F modular socket outlet 6 Amps, 2/3 pin, multipurpose, 2 module complete all as specified and directed.

S&F modular socket 16 Amps, 6 pin multipurpose, 2 module complete all as specified and directed.

S&F modular switch 16 Amp, one module, single pole, one way, 230 volts all as specified & directed.

S&F ceiling rose surface type PVC 65 mm dia, 3 terminal including PVC mounting box all as specified & directed.

S&F modular electronic stepped type fan regulator 100 W, 2 module, 230 volts.

Taking down copper/aluminium sub main wiring complete of any type including removing DB's and other components for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc all as specified & directed.

M&L for sub main wiring and power wiring for Hangar high bay lights/ Aviation lights/ flood lights complete with 2 run of 2.5 sqmm single core, copper conductor cable of PVC insulated, unsheathed, multistranded FRLS cable,1100 volts grade conforming to IS 694 and drawn through in and including non-metallic rigid PVC conduit 25 mm dia medium grade and conduit accessories concealed in walls/ floors/ ceilings etc and fixing on surface by using saddles/ clamps on the steel sections/ trusses etc. including 1run of 2.5 sqmm single core copper conductor cable, PVC insulated, unsheathed, multistranded FRLS cable,1100 volts grade green in colour as continuous earth continuity conductor green in colour and connecting to common earth dolly complete all as specified & directed. Note : 2 run of 2.5 Sqmm copper cable, 1 run of 2.5 Sqmm copper cable as earth wire and PVC conduit shall be measured and paid as one unit.

M&L for sub main wiring complete with 2 run of 4 sqmm single core copper conductor cable PVC insulated, unsheathed, multistranded FRLS cable, 1100 volts grade conforming to IS 694 and drawn through in and including non-metallic rigid PVC conduit 25 mm dia medium grade and conduit accessories concealed in walls/ floors/ ceilings etc and cutting chases/ grooves and making good the disturbed surfaces to match with existing surface including 1 run of 4 sqmm of single core copper conductor cable PVC insulated, unsheathed,multistranded FRLS cable, 1100 volts grade green in colour as continuous earth continuity conductor green in colour and connecting to common earth dolly complete all as directed. Note: 2 run of 4 Sqmm copper cable, 1 run of 4 Sqmm copper cable as earth wire and PVC conduit shall be measured and paid as one unit.

M&L for main wiring complete with 4 run of 16 sqmm single core copper conductor cable PVC insulated, unsheathed, multistranded FRLS cable, 1100 volts grade conforming to IS 694 and drawn through in and including non-metallic rigid PVC conduit 25 mm dia medium grade or higher dia as required and conduit accessories concealed in walls floors/ ceilings etc and cutting chases/ grooves and making good the disturbed surfaces to match with existing surface including 2 run of 16 sqmm single core copper conductor cable PVC insulated, unsheathed, multistranded FRLS cable, 1100 volts grade green in colour as continuous earth continuity conductor green in colour and connecting to common earth dolly complete all as directed. Note: 4 run of 16 Sqmm copper cable, 2 run of 16 Sqmm copper cable as earth wire and PVC conduit shall be measured and paid as one unit.

M&L for main wiring complete with 4 run of 10 sqmm single core copper conductor cable PVC insulated, unsheathed, multistranded FRLS cable, 1100 volts grade conforming to IS 694 and drawn through in and including non metallic rigid PVC conduit 25 mm dia medium grade or higher dia as required and conduit accessories concealed in walls/ floors/ ceilings etc and cutting chases/ grooves and making good the disturbed surfaces to match with existing surface including 2 run of 10 sqmm single core copper conductor cable PVC insulated, unsheathed, multistranded FRLS cable, 1100 volts grade green in colour as continuous earth continuity conductor green in colour and connecting to common earth dolly complete all as directed. Note: 4 runs of 10 Sqmm copper cable, 2 run of 10 Sqmm copper cable as earth wire and PVC conduit shall be measured and paid as one unit.

M&L for sub main wiring complete with 2 runs of 6 sqmm single core copper conductor cable PVC insulated, unsheathed, multistranded FRLS cable, 1100 volts grade conforming to IS 694 and drawn through in and including non metallic rigid PVC conduit 25 mm dia medium grade and conduit accessories concealed in walls/ floors/ ceilings etc and cutting chases/ grooves and making good the disturbed surfaces to match with existing surface including one run of 6 sqmm single core copper conductor cable PVC insulated, unsheathed,multistranded FRLS cable, 1100 volts grade green in colour as continuous earth continuity conductor green in colour and connecting to common earth dolly complete all as directed. Note: 2 runs of 6 Sqmm copper cable, 1 run of 6 Sqmm copper cable as earth wire and PVC conduit shall be measured and paid as one unit.

S&F, recess mounted full panel LED luminaire 36 watt fitting 2' x 2' with white powder coated housing & frame in CRCA sheet, high efficiency LED grade diffuser, electronic driver duly wired upto terminal block, CRI>80, LED colour temperature - 5700k, IP20, 50000 burning hours as per L70 criteria, ambient temperature -0 to 50 Deg C, driver efficiency >85%, THD<10%, PF>0.95, surge protection in CM-3KV, multistage isolated constant current, constant voltage operated driver with range 150-270V AC and safety extra low voltage safe level <60V DC as per IEC standard.

Supply & fix LED recess mounting round down light 18 watt with PC housing and opal PC diffuser with independent electronic LED driver, 18 watts, 230 V TDH <20% CCT 3000K, CRI>80 system lumens output complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as directed.

S&F, LED batten luminaire 20 watt fitting 4' long with white powder coated housing and frame in CRCA sheet, high efficiency LED grade diffuser, electronic driver duly wired upto terminal block CRI>80, LED colour temperature -5700K, IP20, 50000 burning hours as per L70 criteria, ambient temperature - 0 to 50 Deg C, driver efficiency >85%, THD<10%, PF>0.95, sure protection in CM-3KV, multistage isolated constant current, constant voltage operated driver with range 150-270V AC and safety extra low voltage safe level<60V DC as per IEC standard including batten / suspension system complete with all accessories internally prewired and including connection up with twin core twisted flexible copper conductor cable with suitable size all as specified and directed.

S&F, energy efficient sleek LED mirror light fitting 2 feet, 10 watt decorative type driver holder and LED lamp with acrylic / PMMA diffuser for soft glare free light with all accessories internally prewired and including connection up with three core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sqmm including making good the disturbed surfaces to match with existing complete all as specified and directed. Note: Light fitting shall be of >0.95 pf.

Supply & fix LED flood light fitting 120 watts made out of pressure die cast aluminium housing with heat resistant toughened glass and IP 66 protection at any height in hangers / workshops closed version with TDH< 10% CCT 5700K, CRI >80 system lumens output 18750lm energy saving, environment friendly and aluminium alloy pressure die cast housing with epoxy powder coated complete and within built surge voltage protection of 10KV complete all as specified and directed. Note: (i) All necessary fixing / connecting arrangements of nut, bolt, MS rod to be provided by the contractor without any extra payment from department. (ii) Quoted rate is to be deemed the charges of necessary boom lift.

Supply & fix LED flood light fitting 100 watts made out of pressure die cast aluminium housing with heat resistant toughened glass and IP 66 protection at any height in hangers / workshops closed version with TDH< 10% CCT 5700K, CRI >80 system lumens output 18750lm energy saving, environment friendly and aluminium alloy pressure die cast housing with epoxy powder coated complete and within built surge voltage protection of 10KV complete all as specified and directed. Note: (i) All necessary fixing / connecting arrangements of nut, bolt, MS rod to be provided by the contractor without any extra payment from department. (ii) Quoted rate is to be deemed the charges of necessary boom lift.

Supply & fix of LED high bay light fitting 200 W energy saving, environment friendly and robust highway LED with PDC housing suitable for ceiling (surface / suspended) mounting with system efficacy 150lm/w complete including necessary fitting arrangement all as directed by Engineer-in-Charge.

S&F of aviation obstruction light fitting single red dome including LED lamp on the top of High rise bldg / tower / Over head reservior and testing commissioning with 40/50mm GI pipe with accessories to fit the light fitting and taking out U/S aviation obstruction light fitting complete all as specified and directed by Engineer-in-Charge.

Supply and fix sheet metal enclosure with socket outlet two pin and earth plug and plug top including MCB SP 20 Amps, 10KA C curve 240 volt all a directed.

Supply and fixing bracket made out of 40 mm bore GI pipe medium grade 1.20 Mtr long, bend to shape with 2 Nos clamp made out of 40 mm x 6 mm size MS flat with nuts, bolts, washers, including making provision to fix 3 nos Flood light facing hanger side & other 3 Nos flood light facing tarmac side on same light bracket for Hanger all as directed.

S& F Vertical type (VTPN) MCCB DB 8 Way 415 volts, AC , 50 Hz suitable for MCCB up to 125 Amps as incomer and MCB TP/SP out goings, IP 43 protection double door with neutral bar insulated bus bar assembly and fixed in flush with wall and including cable connections all as specified and as directed

S& F Vertical type (VTPN) MCCB DB 6 Way 415 volts, AC , 50 Hz suitable for MCCB up to 100 Amps as incomer and MCB TP/SP out goings, IP 43 protection double door with neutral bar insulated bus bar assembly and fixed in flush with wall and including cable connections all as specified and as directed

Supply and fixing MCB DB TPN 8 way double door, 415 volts, IP-43 protection with neutral bar, earth bar, tinned copper bus bar and fixing in flush/ recessed in wall and making necessary electrical connections complete all as specified and directed,

Supply and fixing MCB DB SPN 8 way double door, 240 volts, IP-43 protection with neutral bar, earth bar, tinned copper bus bar and fixing in flush/ recessed in wall and making necessary electrical connections complete all as specified and directed,

Supply and fix, MCCB, FP 125 Amps, 415 Volts, 16 KA all as directed &specified

Supply and fix, MCCB FP 100 Amps, 415 Volts, 16 KA complete all as directed .

S&F MCB FP 415 Volts of capacity 63 Amp 10 KA, C curve complete all as directed .

S&F MCB TP 415 Volts of capacity 63 Amp 10 KA, C curve complete all as directed .

S&F MCB DP 240 Volts of capacity 40 Amp 10 KA, C curve complete all as directed .

Supply and fix MCB SP 5 - 32 Amps, 10 KA C curve ,230 Volts.

M & L for PVC insulated cable, flexible type with copper conductor of 6 core 4 sq.mm size, complete all as specified and directed.cutting chases to the walls/ floors/ ceiling and repairing with existing surface after work ,complete all as specified and directed .

Supply and fixing MCCB enclosure suitable for FP MCCB upto 125 Amps and fixed in flush with wall and including cable connections all as directed.

Supply and Fix MCCB FP 125 Amps,415 Volt 25 KA 4pole adjustable thermal setting all asdirected & specified .

Supply & fix PVC conduit 25 mm dia medium grade with conduit accessories concealed in walls /floors /ceiling for LAN & Telephone including providing fish wire through out the conduit and cutting chases to the wall s/ floors/ ceiling and making good to match with existing surface after work complete all as specified and directed.

M & L for Modular telephone socket RJ 11 (jack type)one module complete all as specified and directed

M & L for LAN socket RJ 45 UTP information outlet tool less 2 module type complete all as specified and directed .

M & L for modular cover plate with frame for telephone socket RJ 11 (jack type) one module with GI metal flush boxes of suitable size complete all as specified & directed.

M & L for modular cover plate with frame for lan cable socket RJ 11 (jac type) two module with GI metal flush boxes of suitable size complete all as specified & directed.

M & L for earthing complete with 60cm x 60cm x 6mm thick GI plate electrode buried in ground vertically not less than 2.25mtrs deep below ground level with top edge of the plate not less than 1.5mtrs below ground level with GI earth lead of 4.00 mm dia as earthing lead including necessary excavation and earth work in any strata providing charcoal dust, salt in layers all around the earth plate upto 15 cm thickness, PCC (1:3:6) type C1 in chamber, Precast 50 mm thick in cement concrete (1: 2:4) type B.1 reinforced with 8 mm Tor steel at both ways @ 100 c/c for cover with CI frame 20mm dia bore light grade GI watering pipe (ISI marked) furnel etc fixing of GI Pipe 15 mm dia light grade (ISI marked) for protection of earthing strip from earth pit to test point complete all as shown in electrical plate No-3 & making connection complete all as specified and directed.

OM INFRA

G K CONSTRUCTIONS

Lucky Enterprises

Sai construction & services

Vinayaka Enterprises

B5BUILDING SOLUTIONS

Sai Ram Builders