PROVN OF RETAINING WALL BEHIND UNDER GROUND SUMP AND CERTAIN REV WORKS AT JUTOGH CANTT

Amount

Excavation over areas not exc 1.5 m deep and getting out in hard/dense soil complete all as specified and as directed.

M & L for PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundation fillings and mass concrete complete all as specified and directed.

M & L for walling of squared rubble stone masonry brought upto courses, well bonded, bedded and solidly hearted built in CM 1:4 complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length for weep holes in retaining wall complete all as specified and directed.

M&L for providing precast cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in bond stone of size 15cmx15cm in section and length as per section of wall including necessary form work and set in CM 1:4 including provn of reinforced with 4 Nos 8mm dia TMT bars with stirrups at a spacing of 150mm c/c in precast PCC bond stone complete all as specified and directed. Note: Reinforcemet shall be measured and paid separately.

M&L for MS TMT bar 6mm to 8mm dia, cut to length bent to shape required including cranking, bending spirally for hopping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for MS TMT bar 6mm and over upto 10 dia as in stirrups, binder and spacers, cut to length bent to shape required including cranking, bending spirally for hopping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for PCC 1:3:6, type C-1, using 20mm graded crushed stone aggregate, as in coping including necessary form work, weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed

M & L for hand packing with broken stone or boulders dry (any thickness) at back of walls over arches etc. & raising (or lowering) to the required level complete all as specified and directed.

Removing of excavated material (soils, etc) outside MoD land and depositing where directed at a level n.exc 1.50m above the starting point complete all as specified and as directed.

Returning , filling in spreading and levelling and well ramming in layers not exc 25cm including watering for filling under floor complete all as specified and as directed.

M & L for raised pointing to random or polygonal rubble uncoursed or brought upto course stone masonry in CM (1:4) complete all as specified and directed.

M & L for brick work with old size kiln burnt sub class 'B' bricks, straight or curved on plan exc 6 m in mean radius, built in CM 1:6 complete all as specified and directed.

M & L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces, mixed with and including WPC @ 3% by weight of cement or as per manufacturer's instructions finishing surface even and smooth without using extra cement complete all as specified and directed.

M&L for providing precast RCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in drain, man hole cover and similar article with plain faces including necessay moulds and form work and set in CM 1:4, complete all as specified and directed. Note: Reinforcemet shall be measured and paid separately.

M&L for MS TMT bar 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hopping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Desilting of silt/mud etc from storm water drains including disposal out side MoD land and depositing where directed complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) removing of rubbish outside premices as complete all as specified and directed.

M & L for rendering 15mm thick in CM 1:4 on other than fair faces of brick work or concrete surfaces, mixed with and including WPC @ 3% by weight of cement or as per manufacturer's instructions finishing surface even and smooth without using extra cement complete all as specified and directed.

M&L for PCC 1:2:4, type B-1, using 20mm graded crushed stone aggregate, as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed

S&F 100mm bore cast iron (sand cast) soil, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floor complete all as specified.

S&F 100mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) with oval access door complete all as specified and directed.

M&L for providing concrete bed to 100mm dia drain pipe in PCC 1:4:8 type D-2 using 40mm graded stone aggregate including packing under and completely surrounding pipe after they are laid and tested complete all as specified and directed.

Surface excavation not exc 30cm deep and averaging 15cm in deep and gating out in hard/dense soil complete all as specified and as directed.

Excavation in trenches not exc 1.5 m wide and n.exc 1.5m in depth for foundation, footing etc in hard/dense soil complete all as specified and as directed.

M&L for brick work with subclass 'B' bricks, straight or curved on plan any radius, built in cement mortar 1:4, in half brick thick wall complete all as specified and directed.

M & L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces, finishing surface even and smooth without using extra cement complete all as specified and directed.

S&F for roof truss (framed) , trussed purlins , rafter, sun shades, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance piece, cleats etc. confirming to Fe-410W (Gde E-250, quality 'B' complete all as specified and directed.

S&F for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed

S & F MS wind ties, fillets, hold fast etc including necessary drilling holes and fixed with 'J'/'L' hooks, confirming to Fe 290 Gde E-165 complete all as specified and directed.

M&L for broken stone hard core of gauge n. exc. 63mm deposited, spread and levelled in layer n. exc. 15cm thick watered and rammed to a true surface complete all as specified and directed.

M&L for 75mm thick, PCC 1:3:6 type C-2, using 40mm graded crushed stone aggregate as in plinth protection finish the surface even and smooth without using extra cement, complete all as specified and directed

M&L for mooram/ red bajri filling in floor or paving laid in layers not exc 15cm thick including spreading, levelling and watering complete all as specified and directed.

M&L for coloured Non - skid ceramic tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.06 sqm but not exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and incl 15mm thick screed bed in CM 1:6, finished even and rough to receive tile complete all as specified and directed.

M&L for 350x250mm/450X350 x 6 to 7 mm thick glazed ceramic tiles, coloured, in vertical surfaces such as dado, skirting, set and jointed in neat cement slurry and pointed in white cement with pigment to match the colour of tiles, fixed over and incl 10 mm thick rendering in CM 1:4, finished even and rough to receive the tiles complete all as specified and directed.

S&F factory made solid PVC panel door shutter 30mm thick(style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain clour PVC sheets for top rail ,lock rail and bottom rail either side and as gap inserted for top rail and bottom rail .Panelling of plain colour PVC sheet to be fitted in MS frame welded/ sealed to the stiles and nails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and directed.

S&F Solid PVC door frame of size 50mm x 47 mm, made out of 5mm plain colour PVC sheet, reinforced with MS Square tube supplying and fixing in opening as per specification and drawing complete all as specified and directed

S&F mild steel butt hinges 100mm long medium weight colled rolled complete all as specified and directed

S&F aluminium handle febricated type anodized 150mm long complete all as specified and directed.

S&F aluminium anodized barrel tower bolt 200mm long extruded section complete all as specified and directed.

S&F steel ventilator with top hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars complete all as specified and directed.

S&F 4mm thick Figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 sqm in each pane complete all as specified and directed.

M&L for IInd class hard wood timber scantling clean sawn secured with nails timber framed and fixed in framed work complete all as specified and directed

S&F Solid PVC Ceiling / Wall Lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing in SSR, complete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall and false ceiling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical type with closed top) of 500 litres capacity, ISI marked, triple layer, marked embosed, hoisted and fixed in position including connecting up pipes complete all as specified and directed.

S&F 20mm dia ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S & F 20mm bore steel water tubes, `medium grade', galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S & F 15mm bore steel water tubes, `medium grade', galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F bib tap, 15mm bore CP, long body, fancy type cast copper alloy, with crutch or butterfly handle screwed down for iron pipe or for brass ferrule, of size complete all as specified and directed.

S&F stop valve 15mm bore CP, fancy type, cast copper alloy, high pressure with crutch or butterfly handle, with long shank (concealed type) screwed both ends for iron pipe or for unioncomplete all as specified and directed.

S&F vitreous china wash hand basin including brackets, white, size 550x400 mm, incl cutting for and pinning in ends of brackets including Waste fittings, brass, chromium plated with long screwed shanks and fly-nuts and fixed with and incl 32 mm PVC washout pipe complete all as specified and directed.

S&F vitreous china half stall urinal white, including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe complete all as specified and directed.

S&F pillar tap 15mm bore cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts, screwed to iron pipe & fixed complete all as specified and directed

S&F 60cm long (PVC connection) 15 mm bore with PTMT nut complete all as specified and directed.

S&F brass chromium plated tubler towel rail 'D' - type, 60 cm long between flanged complete all as specified and directed.

S&F vitreous china squatting pan ‘Orissa pattern’ size 580x440mm white with integral foot rest including ‘P’ or ‘S’ CI trap complete all as specified and directed.

S&F PVC valve less, syphonic action type low level flushing cistern, white with inlet ball valve , float handle , including brackets 10 ltr capacity including 32 mm PVC flush pipe complete all as specified and directed.

S&F PVC (SWR) floor trap with grating including jointing with solvent cement 75mm bore outlet complete all as specified.

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed.

M&L for providing concrete bed to 110mm dia PVC drain pipe in PCC 1:4:8 type D-2 using 40mm graded stone aggregate including packing under and completely surrounding pipe after they are laid and tested complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed.

S&F 110mm bore, PVC (SWR) bends with access door, fixed with approved adhesive complete all as specified and directed.

S&F 75mm bore, PVC (SWR) bends with access door, fixed with approved adhesive complete all as specified and directed.

S&F PVC (SWR) vent cowl, 110mm bore complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying three coats of white wash complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coats of cement base paint complete all as specified and directed.

M & L for applying two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces of any description, over 10Cm width or girth including preparation of new steel or steel based surfaces, complete all as specified and directed.

M/S Shiv Kumar

Pankaj Builders