Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.4 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹10.3 L+₹83,240 (8.81%)Rejected-Finance A SECTOR BHAGWATI BHAVAN VIJAY NAGAR LAL GHATI BHOPAL M P 462030 | BHOPAL | BHOPAL | MADHYA PRADESH | 462030 | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹11.9 L+₹2.5 L (26.1%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST | |
| 4 | L4₹12.2 L+₹2.8 L (29.4%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹15 L
EMD Value
₹30,000
Closing Date
26 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE BHOPAL
GE BHOPAL BAIRAGARH BHOPAL
PERIODICAL SERVICES TO CERTAIN OTM ACCN AT SI LINES UNDER GE BHOPAL
2022_MES_548865_1
8912/E8
Open Tender
Civil Works
Item Rate
183 days
BHOPAL
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
GE BHOPAL
₹30,000
Yes
7 Oct 2022
31 Aug 2022
28 Sept 2022
31 Aug 2022
26 Sept 2022
14 Sept 2022
Amount
Note - (i) Contractor will deposit the requisite quantity of paint (as directed by Engineer-in-charge) required for the work within 15 days from the date of commencement of the work. The paint will be issued to the contractor as and when required for carrying out the work at site which will be signed by contractor or his rep and Engineer-in-Charge. (ii) Application of oil bound distemper, exterior/interior emulsion paints, etc shall be carried out using roller brush of approved quality only. (iii) Mixing of oil bound distemper, exterior/interior emulsion paints, etc shall be carried out with mechanical mixture/strieer. (iv) Surface shall be allowed to dry completely before application of any paint. Wet or newly plastered surfaces with visible moisture shall not be painted till it is dry. (v) The rate quoted against BOQ are including neccessary scafolding expenses upto triple storey building.
Preparation of old decorated surfaces of wall including brooming, scraping down smoke spot, moulds, moss, efflorescent salts, trading oil, greasy spots and stopping nails marks and M&L for applying one coat of white wash on walls complete all as specified and directed.
All as per BOQ Serial item No.1.10 above but on ceiling complete all as specified and directed.
Complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means, and applying two coats of oil emulsion distemper, white or tinted over one coat of white cement based putty (where required) all as specified and directed. Note - (i) Cement Putty shall be measured and paid separetely. (ii) Complete removal of existing surface to be carried out using mechanical scrappers and wiped clean with cotton cloth so that no dust/loose particles remain on the surface complete as directed by Engineer-in-charge. (iii) Hairline cracks upto 3 mm thickness shall be filled with crack seal of M/s Asian Paint or equivalent as approved; quoted rate is deemed to include for this aspect.
Preparation of old decorated surfaces of wall including brooming, scraping down smoke spot, moulds, moss, efflorescent salts, trading oil, greasy spots and stopping nails marks and M&L for applying one coat of oil emulsion distemper, white or tinted complete all as specified and directed.
Preparation of old decorated surfaces of wall including brooming, scraping down smoke spot, moulds, moss, efflorescent salts, trading oil, greasy spots and stopping nails marks and M&L for applying one coat of cement based paint, white or tinted complete all as specified and directed.
M&L for preparing old painted surfaces of wood and wood based materials of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparing old painted steel & iron surfaces of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed
Complete removal of existing treatment on walls (any number of layers) by scrapping including filling holes, cracks, depressions of scrapped surfaces with putty and preparation of surfaces for further treatment and M&L for applying two coats of exterior water base emulsion paint, white or tinted complete all as specified and directed. [Make:- Apex Paint Ultima of M/s Asian Paints or equivalent in M/s Berger or M/s ICI as approved by GE] NOTE:- .(a) The work of applying exterior emulsion paint shall be carried out by authorized representative/applicator of the manufacturer. (b) A Guarantee of 5 yrs from the certified date of completion for the effectiveness of exterior acrylic emulsion weather coat paint shall be submitted by the manufacturer and contractor. (c) A Security deposit @2.5% of the amount of treatment shall be deposited by the contractor for the entire guarantee period i.e. 5 yrs in the form of FDR in favour of GE. (d) During the guarantee period if exterior acrylic emulsion weather coat paint gets removed or becomes layered contractor shall rectify or replace (at his option) defective materials at his own expenses, when called upon in writing to do so by the GE. Condition 46 of IAFW-2249 (defects liability period) for the guarantee period shall be deemed amended accordingly for the work..
Preparation of old decorated surfaces of wall and preparation of surfaces for further treatment and M&L for applying one coats of exterior water base emulsion paint, white or tinted complete all as specified and directed. [Make:- Apex Paint Ultima of M/s Asian Paints or equivalent in M/s Berger or M/s ICI as approved by GE] NOTE:- .(a) The work of applying exterior emulsion paint shall be carried out by authorized representative/applicator of the manufacturer. (b) A Guarantee of 5 yrs from the certified date of completion for the effectiveness of exterior acrylic emulsion weather coat paint shall be submitted by the manufacturer and contractor. (c) A Security deposit @2.5% of the amount of treatment shall be deposited by the contractor for the entire guarantee period i.e. 5 yrs in the form of FDR in favour of GE. (d) During the guarantee period if exterior acrylic emulsion weather coat paint gets removed or becomes layered contractor shall rectify or replace (at his option) defective materials at his own expenses, when called upon in writing to do so by the GE. Condition 46 of IAFW-2249 (defects liability period) for the guarantee period shall be deemed amended accordingly for the work..
Complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means, and M&L for applying two coats of interior plastic imulsion paint, white or tinted over and including one coat of white cement based putty (where required) complete all as specified and directed. Note - (i) Cement Putty shall be measured and paid separetely. (ii) Complete removal of existing surface to be carried out using mechanical scrappers and wiped clean with cotton cloth so that no dust/loose particles remain on the surface complete as directed by Engineer-in-charge. (iii) Hairline cracks upto 3 mm thickness are to be filled with crack seal of M/s Asian Paint or equivalent as approved; quoted rate is deemed to include forthis aspect.
Preparation of old decorated surfaces of wall including brooming, scraping down smoke spot, moulds, moss, efflorescent salts, trading oil, greasy spots and stopping nails marks by filling cement putty and applying one coat of interior plastic emulsion paint, white or tinted complete all as specified and directed.
All as per BOQ Serial item No.11.00 above but on ceiling complete all as specified and directed.
M&L for French polishing on surfaces of wood and wood based materials of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old works with one or more coats complete all as specified and directed.
M&L for applying 3mm thick wall care putty complete all as specified and directed. [Make: BIRLA/JK]
M&L for ShaliCryl ® 215 single component, UV resistant, unique elastomeric, high build exterior waterproofing coating based on a revolutionary acrylic polymer with quick-set capabilities to resist moisture attack applied in following sequence complete all as specified and directed.:- (a) Surface Preparation :- Remove all loose and foreign materials, if any, by a wash with a jet of air / water. Fill voids and undulation area with Polymer Mortar made out of ShaliSBR Latex, Water, Cement and Sand in the Ratio of 1:1:5:12.5. Fill cracks up to 3 mm with PlastiSeal and cracks over 3 mm with PlastiSeal P after opening the crack to a “V” cut. In case of any poor plaster surface in existence (for old building), remove the same and corrected with new cement : sand mortar in the ratio of 1 : 4 admixed with ShaliPlast LW+ @ 200 ml / bag of cement. (b) Primer Application :- Apply ShaliPrime WB as Primer after dilution with potable water in the ratio 1:0.5 for a theoretical Coverage 8-10 sqm per Ltr of the mix and allow it to dry for 3 to 4 hrs. post elimination of undulation, roughness of concrete, joint marks, Voids and any other surface correction. (c) Application of Material:- Apply first coat of ShaliCryl® 215 over the primed surface @ 160 ml per Sqm. Add maximum of 10% potable water by volume for the first coat only, if required, to have brushable consistency only. Allow the applied coating to dry 6 to 8 hrs of application. Apply second coat of ShaliCryl® 215 without dilution over dried first coat @ 140 ml per Sqm and allow it to dry. Do not undertake any further work over the coated area within 72 hrs of final coat. A coat of 100 micron of ShaliCryl TC 100 will improve water / dust repellent property. NOTE:- (i) Work shall be carried out by the authorised applicator of the manufacturer. Necessary documentary evidence in support of the authorised applicator will be submitted to Engineer-in-charge before the commencement of water proofing work. (ii) The quoted rates is deemed to include for the cost of scaffolding, T&P, etc required for execution of the work.
Taking down plants/vegetable growth, etc (upto 10cm girth), from buildings walls, parapets by cutting/chiseling fully without disturbing structure upto height of 10.00m from average ground level at different locations and cleaning the surfaces neatly with wire brush to remove dust and other foreign particles and applying hydorochloric acid (HCL) on left over root portion and making good the disturbed surfaces in cement mortar 1:4 complete all as specified and as directed.
Taking down cement or cement lime plaster, any description, on brick or stone walls, ceilings, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M/L rendering 15 mm thick cement mortar on brick/ stone surfaces or surfaces other than fair faces of brick work in cement mortar 1:6 in small patches area not exceeding 3.0 Sqm each including taking down existing plaster complete all as specified and directed.
M&L for 10 mm thick rendering in CM 1:4 on concrete surfaces as in ceiling complete all as specified and directed.
S&F Chicken wire mesh, mild steel 12mm mesh size and 0.56mm dia of wire fixed to walls with nails, etc complete all as specified and directed.
M&L for crack filling with approved crack filling compound (Crack seal of M/s Asian Paint or equivalent in Pidilite), crack thickness more than 3 mm; including opening of cracks, cleaning, and necessary scaffolding suitable for height upto 10.00 mtr from ground level complete all as specified and as directed.
Hacking out old broken glass (any thickness, size quality or description) from wooden/metal frames or stone, concrete or brick surrounds, glazed with putty/pins/spring clips or fixed with beads complete all as specified and directed.
S&F sheet glass plain ordinary quality 3.00 mm thick and glazing with oil putty/Bead not exc. 0.50 sqm in each pane complete all as specified and directed.
S&F sheet glass plain ordinary quality 4.80 mm thick exc. 0.50 sqm in each pane complete all as specified and directed.
S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm fixed to frames complete all as specified and directed.
Complete removal of existing treatment on surfaces of RCC Over Head tank for height up to 21.00 M (any number of layers) by scrapping including filling holes, cracks, depressions of scrapped surfaces with putty and preparation of surfaces for further treatment and M&L for applying two coats of exterior water base emulsion paint, white or tinted complete all as specified and directed. [Make:- Apex Paint Ultima of M/s Asian Paints or equivalent in M/s Berger or M/s ICI as approved by GE] NOTE:- (a) The rate quoted are inclusive of necessary scaffolding charges upto 21.00 m height OHT (b) The rate quoted are inclusive of removing of honey bee hives from OHT at any height. .(c) The work of applying exterior emulsion paint shall be carried out by authorized representative/applicator of the manufacturer. (d) A Guarantee of 5 yrs from the certified date of completion for the effectiveness of exterior acrylic emulsion weather coat paint shall be submitted by the manufacturer and contractor. (e) A Security deposit @2.5% of the amount of treatment shall be deposited by the contractor for the entire guarantee period i.e. 5 yrs in the form of FDR in favour of GE. (f) During the guarantee period if exterior acrylic emulsion weather coat paint gets removed or becomes layered contractor shall rectify or replace (at his option) defective materials at his own expenses, when called upon in writing to do so by the GE. Condition 46 of IAFW-2249 (defects liability period) for the guarantee period shall be deemed amended accordingly for the work..
M&L for writing letters or figures (Block, Roman, Italic or Indian) to buildings with synthetic enamel paint, n.exc. 150mm long and 20mm wide in words & figures (e.g. P-1, P-27, T-123, T-81/2, etc) over black synthetic enamel painted back ground of n.exc.300mm dia including obliterating old writing of any description n exc 0.10 sqm with paint to match existing work complete all as specified and directed. Note - "P-1", "P-27", "T-123", "T-81/2", etc shall be considered as one unit for measurement purpose.
Jyoti enterprises
Samaksh Enterprises
SHIV SHANKAR MISHRA
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .