Refurbishment and upgrading roof sheet, toilet and plumbing system in certain OTM Accn in Fort Cantt Under GE (East) Prayagraj.

Amount

Dismantling of asbestos cement (corrugated, semicorrugated etc) sheets in roof covering complete all as specified and directed.

S & F prepainted coloured galvaniume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile stregnth of 550 mpa as in roof covering and gladding to wall fixed with self tapping screws complete all as specified and directed.

S & F prepainted coloured galvaniume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to roof wall, fixed with self tapping screws as specified

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed.

S & F structural rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors, ladders etc fixed with angle cleats or other connecting plates conforming to grade Fe-410W (Gde E-250) quality-B complete all as specified and directed.

M & L for synthetic enamel painting two coats to new steel surfaces over a coat of red oxide primer including preparation of surfaces of any description over 10cm girth or width not other wise described.

M&L for preparation of old painted steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coat synthetic enamel paint complete all as specified and directed.

M & L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in copings, Kerbs, etc including necessary formwork etc complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation board/slabs/blankets/AC boards etc any thickness .

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation board/slabs/blankets/AC boards etc any thickness .

Supply & Fix anodised aluminium snap grid frame work for false ceiling all as specified. (Size of grid 605 X 605 mm) hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified complete all as specified and directed.

Supply & Fix 4 mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws.)

Taking down Chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frame).(Ventilator and Window)

Taking down Chowkats or frames exceeding 1.5 Sqm but not exceeding 4.00 Sqm each (Without taking off shutters from the frame).(Doors and Window)

S & F in repairs solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforcement with MS square tube supplying and fixing in opening as per specification & sketch shown in sketch 8 of SSR part II.

S & F in repairs factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck indie with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fittied in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling & fixing in the frame at site as per specification & drawing

S & F 100 mm butt hinges, heavy weight, cold rolled mild steel, and fixed complete all as specified and directed.

S & F Aluminium alloy, anodised, sliding door bolt of length 250 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of sections or cast-aluminium extruded alloy and fixed complete all as specified and directed.

S & F Aluminium anodised barrel tower bolts extruded section of size 150 mm, all as complete all as specified and directed.

S & F Aluminium anodised handle extruded section of size 150mm complete all as specified and directed.

Material and Labour for Non - skid coloured eramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over Screed bed or bedding layer of mortar 10 mm thick for laying floor finishes over25 mm thick PCC 1:2:4 type B0 including dismantling of exsiting tiling/pcc floor/ wall any type and removing dubries outside of Md/OTM accn complete all as specified and directed.

Material & Labour Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including incl 10mm thick plaster in cm 1:4 including dismantling of exsiting tiling/pcc floor/ wall any type and removing dubries outside of Md/OTM accn complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.laid bedded and pointed in any mortar complete all as specified and directed.

M&L for 16 to 18 mm thick Granite work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations etc complete.

M & L for marble work 16 to 18 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, flooring and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including 15mm thick screed bed in cement mortar 1:6 including dismantling of exsiting tiling/pcc floor/ wall any type and removing dubries outside of Md/OTM accn complete all as specified and directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth of brick walls complete all as specified and directed.

Taking up or down steel tubing and connection including cleaning for refixing or removal to store 15mm bore pipe.

S & F GI tube 15mm bore medium grade with all fittings fixed to walls and ceilings or laid in floor complete all as specified and directed.

Taking up or down steel tubing and connection including cleaning for refixing or removal to store 20mm bore pipe complete all as specified and directed.

M & L for 20mm bore GI tubing medium grade with all fittings and fixed complete to walls/ ceiling or laid in floors complete all as specified and directed by Engineer-in-Charge.

Supply and fix 500 liters capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete and including dismantling of old tank complete all as specified and directed.

Supply and fix 1000 liters capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete and including dismantling of old tank complete all as specified and directed.

S & F in repair 20 mm dia Gun metal, globe or gate valves, with iron wheel head,screwed both ends for iron pipes and fixed complete all as specified and directed.

S&F in repair 15 mm dia Gun metal, globe or gate valves,with iron wheel head,screwed both ends for iron pipes and fixed complete all as specified and directed.

S&F in repair 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 210 g ms) complete all as specified and directed.

S&F Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including setting the trap and pan in concrete and including 10 ltr capacity PVC valveless syphonic action type low level flushing cistern and 32mm dia PVC Flush pipe complete including jointing to socket of flushing rim complete all as specified and directed.

S & F in repair Florentine Ceramic White Under Counter Wash Basin, 555 x 425 x 195 mm excluding taps waste chain and plug but including bracket, waste coupling complete all as specified and directed by Engineer-in-Charge.

S&F in repair vitreous china wash hand basin with pedestal pattern white flat back size 550 x 400 mm excluding taps waste chain and plug but including bracket, waste coupling of 32 mm size fixed in repair complete all as specified and directed by Engineer-in-Charge.

Supply & Fixed in repairs vitreous china pedestal pattern (P Trap) type white wash down water closet pan with Antimicrobial Solid Seat Cover Code No.: C8094 but excluding flushing cistern and flush pipe complete all as specified and directed.

S&F in repairs 10 ltrs PVC (White) valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle, aluminium brackets for bottom support fixing with gitties embeded in wall with drilling machine etc complete all as specified and directed.

PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

Supply and Fix in repairs Health faucet (Hand shower) with 1metre flexible tube with wall hook, Chromium Plated complete all as specified and directed.

S&F in repair 15 mm size bib taps cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes complete all as specified and directed.

S&F in repair 15 mm size angular cock, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed both end for iron pipes complete all as specified and directed.

S&F in repair pillar tap cast copper alloy with capstin heads chromimium plated fancy type screwed down high pressure with or without lettered hot or cold with long screwed shank and fly nuts, screwed for iron pipe 15 mm bore complete all as specified and directed.

Supply and fix soap dish ,matt finished chromium plated (MCH/Colour) as per Jaquar Continental Wall Mounted ACN-CHR-1131N Soap Dish Holder complete all as specified and directed.

S & F in repair brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges including brackets fixed to wall complete all as specified and directed.

S & F in repair 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including all type earth work complete all as specified.

S & F in repair 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified.

S & F in repair PVC (SWR) 110 mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including all type earth work complete all as specified and directed.

S & F in repair PVC (SWR) 110 mm dia pipes single socketed, in any length with rubber ring joints, fixed on walls complete all as specified and directed.

S&F in repair 110 mm dia PVC (SWR) bends any radius with oval access door complete all as specified and directed.

S&F in repair 75 mm dia PVC (SWR) bends with access door any radius complete all as specified and directed.

S&F in repair 75 mm dia PVC (SWR) bends any radius complete all as specified and directed.

S&F in repair 110 mm dia PVC(SWR) plain bends any radius complete all as specified and directed.

S&F in repair 75 mm dia PVC floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

M & L for 150mm x 150mm Salt-glazed stoneware gully traps, square or round mouthed, tvpe 'P' and setting and jointing in cement mortar 1:1 complete all as specified in repairs.

S&F in repair Stack clamps made out of 50mm x 5mm flat iron & 16mm round iron stays including bolts & nuts and securing ends of stays for 100 mm bore pipe complete all as specified and directed.

S&F in repair Stack clamps made out of 50mm x 5mm flat iron & 16mm round iron stays including bolts & nuts and securing ends of stays for 75 mm bore pipe complete all as specified and directed.

Demolition of brick work or stone/ boulder Masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and directed.

M & L for Brick work with fly ash (old size) bricks, straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6.complete all as specified and directd.

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

M & L for rendering 5 mm thick on ceiling surfaces in cement mortar 1:3 finished even & fair all as specified and directed.

M & L for rendering 10 mm thick on other than fair faces of walls of brick work or concrete surfaces in cement mortar 1:6 compound finished even and smooth without using extra cement complete all as specified and as directed.

M & L for rendering 15 mm thick on fair faces of walls of brick work or concrete surfaces in cement mortar 1:4 with water proofing compound finished even and smooth without using extra cement complete all as specified and as directed. Note: water proofing compound shall be measured & paid seprately.

Supply only liquid water proofing compound complete all as specified and directed.

M&L for preparing new plastered or unplastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M & L for preparation of newly plastered wall surfaces and applying two coats of distemper oil emulsion over one coat of birla white putty 1 mm thick preparatory to distempering complete all as specified and directed.

M&L for preparation of old plastered surface and applying two coat of oil bound distemper on walls over a coat of primer and 1 mm thick wall care putty including complete removal of existing treatment complete all as specified and directed.

M&L for applying two coats of cement base paint over one coat of cement primer on newly plastered surfaces of wall including preparation of surfaces complete all as specified and directed.

M & L for Preparation of old decorated plastered surfaces of walls and applying one coat of cement base paint of approved colour, complete all as specified and directed.

M/s Rahul Kumar Agrawal (BID ID -3089541)

shweta constructions (BID ID -3091830)