Renovation of existing old building for VIP rest house at CISF camp under Pandaveswar Area

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material withi In cement mortar

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 Ms lead.

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 Ms lead as per direction of Engineer - in- charge.

1:6 (1 cement: 6 fine sand)

1:3 (1 cement : 3 fine sand)

1:6 (1 cement: 6 fine sand)

Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

Size of Tile 600x600 mm

Size of Tile 600 x 1200 mm

Providing and fixing 1st quality ceramic glazed wall tiles of Kajaria/Cera make conforming to IS : 15622 (thickness to be specified by the manufacture in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3KG per Sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Two coats

With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

New work (Two or more coats applied @ 1.43 ltr/10 Sqm over and including priming coat of exterior primer applied @ 2.20 KG/10 Sqm)

All kinds of soil.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)

1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources)

1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Reinforced cement concrete work in beams, suspended foors, roofs having slope up to 15* landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to foor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources).

Foundations, footings, bases of columns, etc. for mass concrete.

Columns, Pillars, Piers, Abutments, Posts and Struts

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Suspended floors, roofs, landings, balconies and access platform

Thermo-Mechanically Treated bars of grade Fe-500D or more.

1:6 (1 cement: 6 fine sand) CEMENT PLASTER (IN COARSE SAND)

Construction of 20 user septic as per standard design

With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Area of slab over 0.50 Sqm

Cement mortar 1:6 (1 cement : 6 coarse sand)

Granite work

Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent

Second class teak wood

35 mm thick shutters

Second class teak wood

Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)

Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)

With float glass panes of 5 mm thickness (weight not less than 12.50 KG/Sqm)

Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer- in-Charge.

30 mm thick pre laminated PVC door shutters

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 KG and door width upto 700 mm), with necessary accessories and screws etc. complete.

12.5 mm thick tapered edge Glass Reinforced Gypsum (GRG) board conforming to IS: 2095- (Part 3):1996 (Boards with BIS certification marks)

Providing and fixing Jaquar Wall Mounted White Closet WC Opal OPS-WHT-15955P180UFSM with P-Trap, Rimless Wall Hung WC with UF soft close seat cover, hinges, accessories set, Size: 370 X 580 X 430, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :

Supplying & fixing Jaquar (CNS-WHT-963UFSM) or equivalent approved by EIC, Single Piece Slim Concealed Cistern with Wall Mounting Frame, Installation Kit and “S-Type” Drain Pipe Connection Set for Wall Hung WC (with Flush Control Plate, Control Plate Alive) Conceal cistern

Supplying, fitting and fixing jaquar (ALS-WHT-85601) (KUB-35001F) (SDR-WHT-DJ0010F)(PTD-SAP-DT0106CS)(HDR-WHT-M04A) or equivalent approved by EIC, Counter Top wash Basin , pillar cock with base flange, Soap Dispenser - Push Button , Paper Towel Dispenser - Towels with c/z Folds - Wall Mounted , Hand Dryer - Smartflow , complete as per direction of EIC.

Providing & fixing Jaquar (URS-WHT-13259) (PRS-077) or equivalent approved by EIC, Urinal (top inlet) with fixing accessories set & Urinal Valve Auto Closing System with Built-in Control Cock & Wall Flange, complete as per instruction of EIC.

Providing and fixing 600x450 mm beveled edge mirror of superiorglass (of approved quality) complete with 6 mm thick hard boardground fixed to wooden cleats with C.P. brass screws and washerscomplete.

25 mm nominal dia Pipes

50 mm nominal dia Pipes

20 mm nominal dia Pipes

25 mm nominal dia Pipes

P/F CP auto closing bib cock of Jaguar (Code : PRS-CHR-043)or equivalent brand as approved by EIC : 15 mm nominal bore

P/F CP angular stop cock of Jaguar (FUS-CHR-29053)or equivalent brand as approved by EIC : 15 mm nominal bore

P/F shower panel complete set of Jaguar (SHP-BLK-JA011) or similar make including fitting charges all comlete.

P/F CP 3-Hole Basin Mixer with Popup Waste System, 15mm Cartridge Size Jaguar (ARC-CHR-87191)or equivalent brand as approved by EIC : 15 mm nominal bore

P/F electric gyser Insta Prime Electric Water Heater With 5.5 Kw Heating Element Compatible On 1 Phase Connection Vertical Installationof Jaguar (INP-WHT-5.5KW) or similar make including fitting charges all comlete.

P/F Wall to wall shower enclosure with towel rod & handle - of Jaguar (JSE-CHR-110D1012H19X) make with 8/10mm glass Glass: 8mm/10mm Finish: Chrome size (Size : 1001-1200)

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

25 mm nominal bore

50 mm nominal bore

Group A

Wiring for light/ power plug with 2X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

200 mm X 150 mm X 100 mm deep

150 mm X 75 mm X 60 mm deep

200 mm X 150 mm X 60 mm deep

Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

1 or 2 Module (75mmX75mm)

3 Module (100mmX75mm)

4 Module (125mmX75mm)

6 Module (200mmX75mm)

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with

1.5 sq. mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required.

4 way (4 + 12), Single door

Single pole and neutral

Installation of Flexible LED strip light (5 mtr) of Havells (LHEHDEP5UN1F024) or similar brand & make, 24W with drivers, complete.

Installation of LED light in false ceiling as approved by EIC, Philips or similar brand & make, destello recessed, 18W 250x65x250 mm White, complete

Supply & Installation of 300 mm sweep exhaust fan of approved brand and maanufacture in the existing opening, including making good the damage, connection, testing, as required.(Analysis based upon Item 1.50 DSR (E&M))

Supply & Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete 20watt

Supply & Installation, testing and commissioning of LED flood light including all fitting complete 50watt

Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Dark shade pigment using ordinary cement

Cement mortar 1:6 (1 cement : 6 coarse sand)

Fixed to openings /wooden frames with rawl plugs screws etc.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Cement mortar 1:4 (1 cement :4 coarse sand)

Two or more coats of glue sizing with copal varnish over an under coat of flatting varnish

Earthing with G.I. earth pipe 4.5 M long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/ coke and salt ) as required.

Two or more coats on new work

Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture with matching wood beading

25 mm thick

25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws

Upto 5 mm depth and 5 mm width

Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

Total impact of GST for the purpose of CTC