REP/REPLMNT OF PANEL IC CABLES MCCBS CONTACTORS TIMER ARMOURED CABLE INTERNAL WIRING INCUDNG FITTING FIXTURE SWITCH DBS MCBS SECURITY LIGHTS GATE LIGHT WITH CONNECTED ACCESSORIE AND ALLIED WORK OF AC PLANT INSTALLATION UNDER AGE EMII GE NW KNJ AT NSK

Amount

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators, sockets etc. to be measured separately), removing materials to store for keeping in safe custody for re-use at site/Sch of credit and making good disturbed surface of walls, floors, etc., complete all as specified and as directed by Engineer-in-Charge.

Point wiring with single core 1100 volts grade 1.5 sqmm size PVC FRLS insulated unsheathed stranded copper conductor cable using color code drawn through PVC existing conceiled conduit with all accessories for modular fitting such as cover plates ,frame plates,metal boxes of adequate size Complete all as specified in and including 1.5 Sq mm PVC insulated unsheathed copper conductor cable for continous earth conductor (using green colour)to common earth and connecting to earth dolly for the following

(a) One light /fan/ call bell point controlled by one switch

(b) One 5 pin socket outlet 5 Amps on independent board

(c) One 5 pin socket outlet 5 Amps on same board

All as per the item No 02 here in before but with 2.5 Sqmm cable for 3 pin 15 Amps socket complete all as specified and as directed by Engineer-in-Charge.

S&F switch piano flush type single pole one way , 5 Amps , 240V grade ISI marked , complete all as specified and as directed by Engineer-in-Charge.

S&F socket outlet 2 in 1 ,3 pin 5 Amps flush type ISI marked, complete all as specified and as directed by Engineer-in-Charge.

S&F socket outlet 2 in 1 ,3 pin 5 and15 Amps flush type ISI marked, complete all as specified and as directed by Engineer-in-Charge.

Taking down existing street Light/ Flood Light / post lantern / tube light fittings any type any wattage for repair or replacement of burnt /worn out accessories all as directed. Note :- (i) Labour charges for taking down and repair including minor spares like nuts, bolts , insulation materials & cleaning of area upto one mtr around the street light/ building lights/ Poles shall be deemed to be included in the rate .

Supply and fixing Pressure die cast aluminium housing LED street light luminaires with IP66 of 35/45 Watts . Make Bajaj Cat Part No BRTFG45 W or equivalent in CG/Havells.

Supply and fixing Pressure die cast aluminium housing LED street light luminaires with IP66 of 90 Watts . Make Bajaj Cat Part No BRTFG90 W or equivalent in CG/Havells.

Supply and fixing Pressure die cast aluminium housing LED street light luminaires with IP66 of 120 Watts . Make Bajaj Cat Part No BRTFG120 W LED I or equivalent in CG/Havells.

S & F LED floodlight luminaire with secondary optics made in pressure die cast housing and heat sink in aluminium extrusion with IP66, Turbo LED series ,120Watt & accessories and connecting up to looping box with PVC insulated multi stranded copper conductor cable 1.5 sqmm twin Core all as specified and directed. Make : Bajaj Cat ref No BARFEG160W LED or equivalent in C&S /Philips.

Supply and fix LED batten with 20W LED tube light in wall/surface connecting with all required accessories like PVC box base,flexible cable from ceiling rose etc Surface and wall mounted LED batten, Engineering plastic batten with .as directed and specified by engr-in-charge.Make Bajaj BCLSB 20WH or equivalent in CG/Havells

Supply and fix LED drivers suitable for 90Watt Street light fitting complete with all accessories as specified and directed by engr-in-charge.Make Bajaj or equivalent in C&S/PHILIPS .

Supply & Fix in repair bracket for street light fittings made out of 40 mm bore medium grade GI tubing 1.2 m long bent to shape and including suitable size of MS clamps, nuts, bolts and washers applying two coats of aluminium paint over a coat of red oxide zinc chrome primer repair complete all as specified and directed.

Supply and fixing aluminium thimble , cable gland and lux after disconnecting from panel and taking down burnt cable from panel of different location and cutting out the burnt portion of cable and extended the cable from cable loop, preparation of cable including necessary connection and testing complete of following sizes :-Note : (i) 01 Job consisting of 04 Nos Lugs/thimble at one end of cable (ii) Rate of necessary earth work for opening of loop if requried at site are deemed to be included in the quoted rate.

(a) 4 core 16 Sqmm

(b) 3.5 core 25 Sqmm

(c) 3 core 35 Sqmm

(d) 3 core 50 Sqmm

(e) 3 core 95 Sqmm

Supply and connect twin core PVC insulated multistranded 1100 volt grade copper conductor cable of size 2.5 sqmm drawn through existing pipe complete all as specified and directed. Make : Polycab/ Havells/ Anchor/ HPL or equivalent

M & L earthing complete with GI earth plate electrode of size 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below the normal ground level connected with GI strip 32 x 6 mm by means of bolts, nuts, check nuts & washers of galvanished iron steel including necessary excavation and earth work in any type of soil, removing surplus soil to a distance not exc 50 m, with and including PCC chamber in PCC (1:2:4) , type B1, using (20 mm graded stone aggregate), mild steel angle iron frame made out of MS angle iron of size 40x40x6 mm thick duly painted with two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer hinged with and including 6mm thick CI cover with handle, watering arrangement with funnel internally secured with wire mesh with 20 mm dia medium grade pipe for watering ,40 mm dia light grade GI pipe for lead protection in & including alternate layers of charcoal dust and common salt complete all as shown in electrical plate No 3 of SSR Part-1(2009) connected to earthing test point all as specified and indicated including testing on completion

S&F double door MCB DB made out of 18SWG CRCA steel sheets, Phosphates powder coated with copper bus bar, Earth stud, Din Rail, Polyamide Terminal Blocks for incoming and outgoing circuits, inbuilt loose wire box, Ground terminal blocks, duly pre-wired with thimble flame retardant copper conductors and poly layer for protection SP 240 volts 200 Amps rated bus bar 12 way Single door open able, including taking out old unsv MCB DB any size/type.

S&F double door MCB DB made out of 18SWG CRCA steel sheets, Phosphates powder coated with copper bus bar, Earth stud, Din Rail, Polyamide Terminal Blocks for incoming and outgoing circuits, inbuilt loose wire box, Ground terminal blocks, duly pre-wired with thimble flame retardant copper conductors and poly layer for protection SP 240 volts 200 Amps rated bus bar 8 way Single door open able, including taking out old unsv MCB DB any size/type.

S&F 6 to 32 AMP MCB single pole 240 V 10 KA (C-Series). Make L &T , Havells, Legrand, HPL, BCH or equivalent

S&F 6 to 32 AMP MCB SPN 240 V 10 KA (C-Series). Make L &T , Havells, Legrand, HPL, BCH or equivalent

S&F 40 to 63 AMP MCB SPN 240 V 10 KA (C-Series). Make L &T , Havells, Legrand, HPL, BCH or equivalent

Supply and fix in repairs power contactor 3 pole, type MNX- 80, with standard coil voltage 240 volts, rating 100 Amp of make M/s L & T or equivalent in Havells / Siemens all as specified and directed.

Supply and fix in repairs power contactor 3 pole, type MNX-110, with 2 NO + 2 NC aux contacts with standard coil voltage 240 volts, rating 160 Amp of make M/s L & T or equivalent in Havells / Siemens all as specified and directed.

Supply and fix in repairs power contactor 3 pole, type MNX-140, with 2 NO + 2 NC aux contacts with standard coil voltage 240 volts, rating 160 Amp of make M/s L & T or equivalent in Havells / Siemens all as specified and directed.

Supply and fix in repairs on-off push button pendants with elements red/green/orange type of make MIMIC/ M/s L&T / M/s Siemens all as specified and directed.

Supply and fix in repairs indication lamp of make M/s L & T or equivalent make of M/s Siemens all as specified and directed.

Supply and fix in repairs MCB TP, 415 Volts, 50 Hz, 10 KA conforming to IS 8828 of rating 25-63 Amp of Make-M/s Havells/M/s Siemens / M/s Legrand/M/s L&T

Supply and fix in repairs MCB TPN, 415 Volts, 50 Hz, 10 KA conforming to IS 8828 of rating 16-32 Amp of Make-M/s Havells/M/s Siemens / M/s Legrand/M/s L&T

Supply and fix in repairs MCCB TP, 415 Volts, 50 Hz, 16 KA conforming to IS 8828 of rating 100 Amp of Make-M/s Havells/M/s Siemens / M/s Legrand/M/s L&T

Supply and fix in repairs MCCB TP, 415 Volts, 50 Hz, 16 KA conforming to IS 8828 of rating 160 Amp of Make-M/s Havells/M/s Siemens / M/s Legrand/M/s L&T

Supply and fix in repairs MCCB 3 Pole , 415 Volts, 50 Hz, 16 KA conforming to IS 8828 of rating 250 Amp of Make-M/s Havells/M/s Siemens / M/s Legrand/M/s L&T

Supply and fix in repairs MCCB 4 Pole , 415 Volts, 50 Hz, 36 KA conforming to IS 8828 of rating 250 Amp of Make-M/s Havells/M/s Siemens / M/s Legrand/M/s L&T

Supply and fix in repairs MCCB 4 Pole , 415 Volts, 50 Hz, 36 KA conforming to IS 8828 of rating 400 Amp of Make-M/s Havells/M/s Siemens / M/s Legrand/M/s L&T

Supply and connect Single core PVC insulated FRLSH multistranded 1100 volt grade copper conductor cable of size 6 sqmm single runs drawn through existing pipes/ Floor/trench/wall complete all as specified and directed. Make : Polycab/ Havells/ Anchor/ HPL or equivalent

Supply, laying and testing Single core PVC insulated FRLSH multistranded 1100 volt grade copper conductor cable of size 10 sqmm single runs drawn through existing pipes/ Floor/trench/wall complete including fixing with Copper Lugs of suitable size all as specified and directed. Make : Polycab/ Havells/ Anchor/ HPL or equivalent

Supply and fixing of XLPE insulated ,armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sq mm 3.5 core

Supply and fixing of XLPE insulated ,armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 50 sq mm 3.5 core

Supplying and laying synthetic Rubber insulated mats 2 mm thick for voltage upto 3.3 kv for electrical purpose as per IS 15652-2006, (superseding IS 5424) suitable for electrical shock safety of sizes 2m x 1m.all as specified and directed by Engr -in- Charge.

Anu Trading Co

R A Electric Co.

SREE HARITHA ASSOCIATES

M.K Enterprises

ENJOY

D.N.PATIL

K A ELECTRIC CO

somnath engineering corporation

Radha Engineering Services

Sagar Electricals