Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹46.2 LAccepted-AOC | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹50.2 L+₹2.4 L (5.04%)Rejected-Finance H NO 154 VILLAGE SHIKARPUR PO NAJAFGARH NEW DELHI 110043 | WEST | DELHI | 110043 | L2 | Rejected-Finance BEING OTHER THAN LOWEST | |
| 3 | L3₹52.7 L+₹4.9 L (10.3%)Rejected-Finance | L3 | Rejected-Finance BEING OTHER THAN LOWEST |
Tender Value
₹48.2 L
EMD Value
₹96,400
Closing Date
20 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (EAST) DELHI CANTT-10
GE (EAST) DELHI CANTT-10
SPL REPAIR TO BLDG NO P-29A (GUEST ROOM, STAFF LIVING AND COOK HOUSE) AT MALL ROAD IN THE AOR OF AGE B/R-III UNDER GE (EAST) DELHI CANTT-10
2023_MES_576770_1
GE/DE-87/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE (EAST) DELHI CANTT-10
Class D Cat a (i)
8 documents required · 8 mandatory
₹500
Yes
GE (EAST) DELHI CANTT-10
₹96,400
Yes
20 Mar 2023
23 Jan 2023
22 Feb 2023
23 Jan 2023
20 Feb 2023
6 Feb 2023
Amount
Taking down cement or cement lime plaster , any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.
M & L for 15mm thick rendering in cement mortar 1:4 on fair face of brick walls/ concrete surfaces and finished even and smooth without using extra cement in any position incl scafolding etc, complete all as specified and as directed.
M & L for 15mm thick rendering in cement mortar 1:6 on fair face of brick walls/ concrete surfaces & finished even and smooth without using extra cement in any position incl scafolding etc, complete all as specified.
M & L for Brick work with sub class 'B' bricks of old size, straight or curved on plan to any radious built in CM 1:6 including demolition of Brickwork built in cement mortar including all quioins, arches, pillars etc complete all as specified.
Demolition of cement concrete (unreinforced) in ground floor or in any position and paving not exc. 15 cm thick (below or above ground level) complete all as specified and as directed.
M & L for 75 mm thick cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection laid in bays & surfaces finished even and smooth without using extra cement, complete all as specified and as directed.
M & L for Non-Skid coloured ceramic tiles 7-8mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM 1:6, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and as directed.
M & L for glazed coloured ceramic tiles in vertical surface 300x600x7 mm thick (with pattern and border work as required at site) set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 10mm thick rendering in CM 1:4 including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and as directed.
M & L for coloured vetrified tiles of size 600 x 600 x 8-10mm thick as in floor over and incl 15mm thick screed bed 1:6 in cement mortar, set and jointed in white cement with pigment to match including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and as directed.
M & L for Vitrified coloured ceramic tiles light shade 10mm thick, square/rectangular(with pattern and boarder work as required at site), area of tiles exceeding 0.42Sqm and not exceeding 1.50Sqm each tiles as in flooring over and incl 15mm thick screed bed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match over or filling spacers as per requirement at site including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and as directed.
M&L machine cut kota stone slab flooring 20-25mm thick over and incl 15mm thick cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and as directed.
M & L for 75mm thick Cement concrete 1:4:8 Type D-2 (using 40mm graded agg) as in sub base of flooring or in any position including demolition of existing PCC of any n exc 15cm thick complete all as specified and as directed.
M&L Coloured Chequered cement concrete tiles 30cm x30 cm x 20-22MM thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments, over and including 20mm thick screed bed in cement mortar 1:6 Including dismantling of existing chequerred tiles of any type complete all as specified and directed.
M & L for rubber moulded glossy finished Coloured Machine pressed precast conctete interlocking paver block of any shape and size (Two colour combination) confirming to IS 15658-2006 of 60 mm thick, M-40 Grade, laid over and incl 50mm thick sand cushioning, laid duly mainting propper slope as per requirement at site over hardstanding including dismantling of existing tiles of any type complete all as specified and as directed.
M & L pre cast concrete blocks for kerb stone with solid block exc 10 cm in width type B-1 , 1:2:4 ( using 20 mm graded stone aggregate) set in CM 1:6 of any shape and size as approved by GE, including necessary excavation and earth work including returning filling in the earth and removal of surplus earth from site if any, kerb stone shall be fixed in true line and level or in curves for eding of road side path including embedding PCC pre cast block in ground to any depths as required and tamping soil around PCC block complete all as directed.
Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.
S & F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
S & F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
S & F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confrming to IS 1161-1979 grade St-240 including dismantling of existing steel work of any type complete all as specified and directed
Dismantling wrought iron or mild steel work of any description not otherwise provided for
M&L stainless steel work grade 304 in tubular trusses, vertical post, purlins, including special shaped, washers, etc., complete using induction butt welded tubes, notching, drilling, grinding, fitting cleats, fish plates, gusset plates, etc., complete all as specified and as directed.S & F for 40mm dia Stainless Steel bars as in hand rails and in gallery horizontal/vertical fixed/welded complete all as specified and as directed.
S & F 2mm thick fibre glass reinforced translucent Plain/corrugated sheeting with additional reinforcement of chicken mess with two corrugation side lap fixed with 'L' or 'J' type or cranked hook bolts including dismantling of of existing sheeting of any type complete all as specified and directed.
S & F designer board false ceiling of size 600x600x4mm thick white prelaminated sett embosed reinforced tiles of approved texture at all height laid on Hot dipped Galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33mm thick GS sheet and of size 24x32x3000mm and spaced at 1200mm centers securely fixed to the structural soffits by approved hangers at 1200mm maximum centers. Hangers of GI wire 4mm dia to be fixed by approved rawl plug, level and justers and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall. Flush fitting of 1200mm long cross tee (with double stitching) to be interlocked between main runners at 600mm center to form 1200x600mm modules cross tee longer than 600mm to be supported independently. 600x600mm modules to be formed by fitting 600mm long cross Tee centrally between the 1200mm cross tee. Tee, Perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacture instruction including taking down the existing false ceiling of any type with frame work complete all as specified and directed.
S & F plain gypsum board panel 12 mm thick on ceiling with and including necessary GI frame work for seamless ceiling used with ' T ' , channel or any section including screws , cleats ,fasteners, clips and all required accessories , hangers etc of galvanized steel all as per manufacturer design conforming to IS-2095 and 2542(1981) the weight of the board shall be not less than 7 kg per sqm and including dismantling of walls and celing existing old board (fibre pulp.insulation etc)or insulation boards/slabs/blanks any thickness including cover fillets etc including two coat of OBD over a coat of primer complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 Sqm each complete all as specified and as directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but n.exc 4 sqm each complete all as specified and as directed.
M&L aluminium alloy powder coated windows including aluminum powder coated frames sliding track, bottom weighing not less than 1.015 Kg/RM, sides and top not less than 0.826 Kg/RM double revated and 0.55Kg/RM for window shutter with one fixed glazed shutter and two nos glazed/gauged shutter sliding type with aluminium sections as per series - A (15mm) 3 track of Jindal section numbers for sliding windwos with framed shutter including aluminium allow powder coated snap type beads handles with locking arrangement spring action and glazing clip joint cleats rubber gaskets etc including provision of 5.5mm thick tinted glass/frosted glass of superior quality and stainless steel jali including all standard fittings, complete all as specified and as directed.
M&L aluminum alloy powder coated door including frame and channel of section (Door frame single groove 101.6mm x 44.45mm x 2.1mm, shutter top section 47.62mm x 44.45mm x 1.95mm thick, shutter bottom section 114.30mm x 44.45mm x 2.15mm thick, shutter vertical section 85mm x 44.45mm x 1.80mm thick, shutter middle section 83.50mm x 44.45mm x 2.40mm thick & glazing clips weighing not less than 0.097 Kg/RM) including shutter fixed to sliding type/openable frame and channel as directed and approved by GE and as per IS specifications including provn of 5.5mm thick tinted glass/12mm thick prelaminated particle board as required including handles, tower bolt, floor spring heavy duty “SAMRAT” , locking arrangement “GODREJ”, rubber gasket and door stopper complete all as specified and as directed.
M&L aluminium alloy powder coated standard hollow section for ventilotors as per approved sample and as per IS specifications, shutters weighting 0.55 kg/RM, rectangular frames of section 101.6mm x 44.45mm x 3.18mm weighing not less than 2.54Kg/RM including provision of 5.5mm thick tinted glass of superior quality including handles, tower bolt, hinges and all standard fittings complete all as specified and as directed.
M&L aluminium alloy powder coated glazed or skelton shutter including frame channel of section ( door frame single groove 85mmx45 mm x 1.25mm thick, shutter top section, bottom section, middle section and vertical section 65 mm x 45 mm x 1.25 mm thick and glazing clips weighing not less than 0.097 Kg/RM ) including shutter fixed to openable frame and channel as directed and as per IS specifications including S & F stainless steel wire cloth as required handles, tower bolt, door closer, locking arrangement Godrej, rubber gasket and door stopper complete.
M&L providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) and 8mm thick tinted/frausted glass. (Note: The unit rate quoted by contractor include cost of glass and all other connected accessories. Net opening including frame will be measured for payment purpose.) Make:-Okotech Aparno, H20 Solution, Fenesta or equavalent
M&L providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) and with stainless steel wiremesh (0.36mm nominal dia of wire and average width of apreture 1.40mm. (Note: The unit rate quoted by contractor include cost of wiremesh and all other connected accessories. Net opening including frame will be measured for payment purpose.) Make:-Okotech Aparno, H20 Solution, Fenesta or equavalent
M & L for Sliding/openable glass door 12mm thick (toughened glass) of approved quality including necessary all stainless steel powder coated hardware fittings (As like sliding rail, guide, clips, frame , brackets , clits , jammers, stopers, locking arrangement etc) door fixed with floor spring, with two No's stainless steel handle on each leaf/door n exc 30 cm long 25 mm thick complete drilled for fixing with all fitting and fixture complete all as specified and as directed.
M & L for 12mm thick (toughened glass) of approved quality fixed in any position (partition, bathroom enclosure and the like)including necessary all stainless steel hardware fittings (As like frame, brackets, clips, jammers, stoppers. etc.) complete drilled for fixing with all fitting and fixture, complete all as specified and as directed.
S & F Solid PVC door frame of size 50mm x 95mm made out of wood grain printed PVC sheet used reinforced with M.S. tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.
S & F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front and back Face (wooden finish pattern), supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.
S & F for Pressed steel frames size of 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, including filling hollow portions frame with PCC 1:3:6 type C0 using 12.50mm graded crushed stone aggregate, etc, complete all as specified and directed.
S&F 40mm thick factory made flush shutter, solid core construction with block board and plywood face panels, commercial type on both sides, complete all as specified and directed.
S&F 35mm thick second class hard wood Glazed and skelton shutters, open rebated and prepared to receive wiremesh, gauge, etc (without sashbars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing wiremess, etc, sizes of members of shutters as specified in SSR Part -, Section 8, clause 8.24 (a); supplied and fitted to chowkats.
S & F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples include for fixing with beads.
S & F 100mm size stainless steel butt hinges fixed to any type of frame with reqd nos of screws complete all as specified and as directed.
S & F Aluminum Anodised 150mm size barrel tower bolt with complete all as specified and as directed.
S & F 150mm size aluminum adodised handles complete all as specified and as directed.
S & F 300mm long Mild steel sliding door bolt with haps, stapple ( bolt type ) and fixing clips of sheet, cast of extraded sections and fixing bolts and sliding bolts of extraded sections complete.
S & F Aluminium ( Die cast ) body door closer hydraclically regulated designation No. 3 universal type suitable for door shutters of 701 to 850mm in width and of weight between 61 to 80 kg, fixed in repairs, complete all as specified and as directed.
M& L for screed bed 15mm thick on top of cleaned concrete surfaces in cement mortar 1:4 mixed with water proofing compound, including taking down existing roof treatment of any type and also taking down cement plaster on concrete surfaces, including raking out joints, hacking for key, scrubbing down with water etc., to receive further treatment, complete all as specified and as directed. Note : Water proofing compound shall be measured and paid separately under respective item.
Supply only water proofing compound, to be mixed in cement mortar or concrete as per proportion specified by manufacturer, complete all as specified and as directed.
M&L providing and applying Smartcare Dampproof, a fibre reinforced elastomeric liquid water proofing membrane formulated with reinforcing acrylic fibers having Sun Reflectivity Index (SRI) of 105 on horizontal/vertical surfaces of roof/wall/chajjas in multiple coats @2.0 litre/sqm. Primary coat is self-priming coat of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1, damp proof : water) and other coats to be applied undiluted. The coating needs to be reinforced with 40 GSM geotextile, to sandwiched between 2nd & 3rd coat of coating. The application shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes complete in all respect as per the direction of Engineer-in-Charge. Make: SmartCare Damp Proof of Asian Paints or equivalent in Berger and Nerolac. Notes: (1) The work shall be executed through authorised applicator of manufacturer only. (2) Authrised Applicator shall be approved by GE before starting of work. (3) All materials shall be procured directly form manufacturer. The purchase voucher/ Bill shall be produced to the Engineer-in-Charge for his verification of material. Engineer-in-Charge shall deface the original purchase vouchers. (4) Guarantee: The contractor shall furnish a written guarantee for the effectiveness of the water proofing treatment for a period of Eight years in favour of the GE. A sum equivalent to 2.5% (Two point Five Percent) of the cost of water proofing treatment shall be retained by the Govt from the contractor’s dues as security deposit. The contractor may, however, furnish a fixed deposit receipt in lieu from a Schedule bank pledged in favour of Garrison Engineer.
S & F Rotational moulded polyethylene water storage tanks 1000 lts capacity, double layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable overhead tank of any description complete.
S & F Rotational moulded polyethylene water storage tanks 2000 lts capacity, double layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable overhead tank of any description complete.
S & F in repairs Vitreous china floor mounted WC ( Cascade) one piece type (off white) including connecetion in drain etc incl water closet seat cover CP jet spary, Health Faucet, flushing cistern, with P or S trap with all fitting and fixture complete all as specified and as directed. (Make : Jaquar or equivalent in Cera/Parryware).
S & F in repairs Vitreous china squatting pan of each pattern long pan size 580mm white with 'p' or 's'trap fixing with screws of suitable size including flush pipe PVC 32 mm dia, complete all as specified, making connections to trap and to flush pipe, fixing flushing cistern etc, and making good to floors, complete all as specified.
S & F in repair 10 Ltrs capacity PVC valveless symphonic action type flushing cistern white low level with inlet, ball valve float handle including bracket and flush pipe etc complete all as specified and directed
S&F vitreous China urinals, half stall type, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixed in repairs, complete all as specified.
S & F in repairs Angle valve of CP any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms complete all as specified and as directed. (Make: Jaquar/Marc/Kohler)
S&F in repairs bib taps, (Long body) cast copper alloy fancy type, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe15mm bore all as specified and directed. Make & Cat Part : Jaquar-Cat No. CON-047KN, Jaquar-Cat No. CON-107KN, Kohler-Cat No.K-37341IN-4-CP
S & F in repairs PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed.
S & F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed. (Make: Jaquar/Marc/Kohler)
S& F Brass chromium plated towel rack of size 600 mm x 350mm, fixed with brass screws, fixed in repairs, complete all as specified and as directed. (Make: Jaquar/Marc/Kohler)
S & F in repairs Chromium plated towel ring 250mm dia complete all as specified and directed (Make : Jaquar/Marc/Kohler).
S & F in repairs PVC (SWR) Floor/Nahani trap, plain dia of outlet 125mm, complete all as specified and as directed.
S & F Stainless steel Grating dome 125mm dia with or without hole for waste pipe, fixed in repairs, complete all as specified and as directed.
S & F in repairs CP toilet paper holder fixed with plug and brass screws, complete all as specified and as directed.
S & F Designer type high quality fancy type looking mirror of size as approved by Engr-in-Charge 8-10mm thick, fixed to wall with stainless steel studs, screws, brackets and washers etc complete all as specified and as directed.
S & F in repairs Brass CP basin mixer central hole, for mixing hot and cold water fixed as per manufacture's manual, with long shunk and cup washers, screwed both ends suitable for 15mm bore GI pipe joints to GI pipes or unions, complete all as specified and as directed. Make & Cat Part : Jaquar-Cat No. KUP-35051BPM, Jaquar-Cat No. KUP-35005BPM, Kohler-Cat No. K-74013IN-4BND-CP, Kohler-Cat No. K-74026IN-4BND-CP.
S & F in repairs Brass chromium plated wall mixture 3 in 1 system with provision for hand shower and overhead shower and suitable for 15mm bore GI pipe including three joints to steel pipes or unions and plugging and screwing to walls, fixed in repairs, complete all as specified and as directed. Make & Cat Part : Jaquar-Cat No. CON-281KN, Jaquar-Cat No. COP-281PM Kohler-Cat No. K-98754IN-4-CP.
S&F 15mm bore brass chromium sink mixer of mixing 'Hot' and 'Cold' water, with swinging point screwed down for iron pipe complete all as specified Make :- Jaquar Cat No 5309 /Hindware Cat No F280020CP /Cera Cat No F1015501 or as approved by GE
S&F sinks (Double bowl) made of stainsless steel 1mm thick as in kitchen with plugs, washers and wastes, including bedding in cement mortor on to dwarf walls or including cantilever brackets and connecting union to pipe overall size 915mmx460mm, double bowl (each bowl size 410mm x 330mm x 160mm), in repairs, complete all as specified and as directed. (Make : Nirali/Jayna/Diamond)
S & F tubing 15mm bore medium grade, galvanised, ISI marked with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down GI tubing 15mm bore and connections complete all as specified and directed.
S & F tubing 20mm bore medium grade, galvanised, ISI marked with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down GI tubing 15mm bore and connections complete all as specified and directed.
S & F 20mm outer dia CPVC pipes with all fittings SDR 11 & Plain CPVC SDR 11 fittings ISI marked on walls/ceiling or laying in floors including taking up or down GI tubing 15mm bore and connections complete all as specified and directed.
S & F in repairs 15mm bore Gun-metal, globe or gate valves, with iron wheel head screwed for iron pipe of 15 mm bore complete all as specified and directed.
S & F in repairs 20mm bore Gun-metal, globe or gate valves, with iron wheel head screwed for iron pipe of 15 mm bore complete all as specified and directed.
M & L 20 mm thick granite (Z black colour) of any type work table rubbed and polished as in steps, jambs, pillars, window cills, cooking platforms and like in over and incl 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab , notching and moulding including demolition of existing granite complete all as specified and as directed .
S & F in repairs 110mm dia PVC (SWR) pipes single socketed in any length with rubber rings joints fixed to walls or laid in floors as sanitary fittings, rain water pipes etc in any position complete all as specified and directed.
S & F 110mm bore PVC (SWR) bends any radius complete
S & F in repairs brass Chromium Plated bottle traps 32mm bore for wash basin with inlet & outlet, screwed for pipe or connetions including necessary packing, union & cap all as specified and directed.
S & F in repairs ready made floor/wall mounted Vanity box made of HDHMR board, both side laminated consisting of the following combination :- (a) Wash Hand Basin 810mm x 500mm. (b) Base Cabinet 780mm x 485mm x 460mm. (c) Side Cabinet 300mm x 250mm x 1800mm. (d) Mirror cabinet size 780mm x 160mm x 800mm. Make : Hindware - Cat Part No. 70089 or 70084. Make : Kohler : Cat Part No. K-31602IN-E63
S & F Vitreous chinaware table top wash hand basin (WHB) of size 595mm x 440mm x 185mm complete including 32 mm dia chromium plated waste coupling, PVC waste pipe etc., in repairs, complete all as specified and as directed. (Make : Jaquar/Marc/Kohler).
S&F in repair wall mounted multiple function Shower Panel including all acessories and fittings, in repairs, complete all as specified and as directed. Make : Hindware Cat Part No. 511686 (size 1650mm x 150mm x 550mm)/Jaquar Cat Part No. JPL-SSF-ST88148B(size 1600mm x 200mm) or JPL-WHT-TMCURVENEO (size1500mm x 230mm) or eqivanlent in Cera/Somany
S&F solid PVC wall panelling consisting of 8-10mm thick wood grain printed PVC sheet used instead of plain colour sheet inclusive of solvent cement and fixing at site including dismantling of old wall panelling of any description, complete all as specified and as directed.
M & L for preparation of new plaster external wall and ceiling surfaces of and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) over and including priming coat of exterior primer applied and 1-2mm thick wall care putty over new surfaces complete all as specified and as directed.
M & L Preparation of newly plastered /unplastered surfaces of walls and ceilings over 1-2mm thick Birla White/J K White wall care putty, again sand papering thus making surface good and applying Two coats of Oil Bound Distemper on wall surfaces over a coat of primer ,complete all as specified and directed.
M & L for preparation of plastered or unplastered old decorated surfaces of wall and ceiling including brooming down or scraping down with steel wire brushes of smoke spots , moulds ,moss efflocerent salts and treading oil and greasy spots, filling the cracks, holes with POP/Putty and applying two coats of Oil bound distemper including 1-2mm thick wall care putty JK or Birla complete all as specified and directed.
M & L for preparation of Old plaster external wall and ceiling surfaces by completely removal of existing painting surfaces, filling the cracks, holes with POP/Putty and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) over and including priming coat of exterior primer applied 1-2mm thick wall care putty in two layers complete all as specified and as directed.
M & L for Preparation of New/Old plastered or unplastered surfaces of walls and applying Texture Painting on Wall/Ceiling of various pattern/design over a coat of wall primer and 1-2mm thick wall care putty JK or Birla complete all as specified and as directed.
S & F for Preparation of New/Old plastered or unplastered surfaces of walls and applying wall paper on Wall/Ceiling of various pattern/design over a coat of wall primer and 1-2mm thick wall care putty JK or Birla complete all as specified and as directed.
M & L for Preparation of path/Hardstanding/VIP walking ways surfaces by brooming down/scraping down with steel wire brushes and applying Two coats of high quality floor paint complete all as specified and as directed.
M&L two coat of synthetic enamel paint (finishing coat) over one coat of primer to new steel surfaces of any description over 10 cm width or girth incl prepration of surfaces complete all as specified.
Preparation of new or previously untreated wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified.
Eacavation in trenches not exc 1.5m wide and not exc 1.5m in depth for foundation exc on for walls, shafts, manholes not exc 10 Sqm on plan or for laying pipes/cables etc and getting out in soft/loose soil complete all as specified and as directed.
Returing filling in incl spreading levelling watering and well ramming in layers not exceeding 25cm in soft or loose soil complete all as specified and as directed.
Removing excavatged matereials to a distance not exc 50m and depositing where directed at a level not exc 1.5m above the starting point in soils complete all as specified and as directed.
M & L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation, filling and mass concrete all as specified and directed.
Demolition and breaking up drain pipes (SGSW/ AC/RCC) including hunching and benching set in cement mortar for 150mm to 300mm dia pipe, and removal of debris from site and deposited where directed at a distance not exc 1KM from site complete all as specified and as directed.
M & L for 200 mm dia (internal dia) RCC hume pipe class NP -2 laid and and jointed complete with colleres complete laid in trenches and tested complete all as specified and as directed.
M& L for PCC 1:3:6 type C2 using 40 mm grade stone aggregate as in bed to drain pipe 200 mm bore incl forming cradles complte all as specified and directed.
S & F for Precast RCC manhole covers 75 mm thick medium duty conforming to IS-12592, complete all as specified and as directed.
M & L for PCC 1:2:4 type B-1 using 20mm graded stone agg as in surface channels complete.
M & L for Plain cement concrete 1:2:4 type B- 1 using 20mm graded crushed stone aggregate as in window or door cills, lintels, bressumers, steps, quoins blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundry pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone wlling), corbels, brackets etc. (of any indicated section), with plain fair faces, including necessary form work etc., complete all as specified and as directed.
Excavation in post holes (or similar holes) in soft/loose soil each not exceeding 0.5 cum getting out, returning, filling in ramming earth or broken rubble in layers not exceeding 25 cm, watering and removing of surplus soil to a distance not exc 50m and making good surfaces, complete all as specified and as directed.
S & F Mild steel framed work as in grills, gratings etc, with end of bars shouldered and or riveted forged into spikes, framed guard bars, barred iron doors, ladder, framed balusters, railing, frame work for water tanks and similar works, complete conforming to Fe 290 Gde E-165, complete all as specified and directed.
S & F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples include for fixing with beads.
Taking down carefully old unserviceable copper/aluminium point wiring From existing conduit / batten type (light, fan, socket or power point) complete such as switches, ceiling rose, pendent holder, regulator and socket etc and making good the disturbed surface of complete all as directed.
Taking down LED tube light fitting, Wall light fittings,2 X2 Led Panel bed light fittings etc. removing materials to store for keeping in safe custody and then refixing in position after repair work complete all as directed.
M&L for point wiring complete with 1.5 Sq mm (nominal area) FRLS, PVC insulated un-sheathed and stranded copper conductor cable ISI marked and including PVC concealed conduit ISI marked of size 20 mm dia medium grade and PVC conduit fittings such as tees, bends, elbow, reducers etc including FRLS, PVC insulated unsheathed 1.5 Sqmm copper earth wire, connecting to common earth dolly with and incl Metal flush box and cover plate of suitable sizes for fixing modular switches/sockets/fan regulator etc , complete all as directed.
(a) one light point / fan point/ wall fan point/ bell/ buzzer controlled by one 1-way switch/ bell push.
(b) one socket outlet point 5 amps on the same board.
(c) one socket outlet point 5 amps on the independent board.
All as per srl item No 108 here-in-before but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire.
S&F Modular switch 6 Amp, 1 way, 1 module size complete all as directed.
S&F Modular socket 6 Amp, 2/3 pin, universal type, 2 module size complete all as directed.
S&F Modular switch 16 Amp, 1 way, 1 module size complete all as directed.
S&F Modular socket 16 Amp multipurpose shuttered type, 2 module size complete all as directed.
S&F Modular Fan regulator step type, 120 watts, 2 Module size complete all as directed.
S&F Ceiling rose, insulated body, 3 terminal, 240 volts, 5 Amps complete all as directed.
S&F PVC batten holder including 9W LED bulb all as specified and directed.
S&F in replacement of LED bed side light, 5/6 Watts, wall mounted type and making all electric connections complete all as specified and as directed.
S&F of recessed/surface mounting 2x2 square flate panel ultra slim scoop LED light 36 Watt warm / cool white with drilver / transformer etc suitable for grid ceiling / gypsum board / POP ceiling incl making all elctric connection complete as directed.
Supply and fixing in replacement wall light fitting comet type with and incl 9 watt LED lamp complete all as directed.
Supply and fixing in replacement of LED tube light fitting 20 W to wall mounting type with and including all electric connections with two core PVC insulated, PVC sheathed copper conductor flexible cable complete all as specified.
S & F in replacement energy efficicent LED fittings 45W LED 6K suitable for building security light pressure die cast aluminium roadway luminaire with high power LEDs and HF electronic driver complete all as directed.
Supply and fixing in replacement of street light fitting bracket, 1.0 mtr long made out of galvanized iron pipe of 32 mm dia size light grade complete with nut, bolts, washer, clamps etc inclusive of one primer coat, one under coat and one finishing coat of silver paint complete all as directed.
Supply and fixing in replacement of Ventilation fan 250mm sweep,1250 RPM,non metalic resin body, single phase 240 volts AC 50 Hz and connecting up complete incluiding louvers and provision of copper cable 3 core of size 0.5 sqmm complete all as specified and as directed.
Supply and fixing heavy duty exhuast Fan 450 mm sweep, 1400 RPM, metallic body, single phase 240 volts AC 50 Hz and connecting up complete including louvers and provision of copper cable 3 core of size 1.5 sqmm and depositing the old u/sto MES store yard complete all as specified and as directed.
S&F of ceiling fan of size 1200mm sweep 240V single phase, 50Hz DB, BEE, 5 Star rating BLDC regulator operated type, service value not less than 6.0 compete and depositing the old u/sto MES store yard complete all as specified and as directed by Engineer in Charge.
M&L in replacement of Sub main wiring with 2 run of 10.0 Sqmm (nominal area) FR, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in to separate PVC concealed conduit 25 mm dia with all fittings and including 10.0 Sqmm (nominal area) FR, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB complete all as directed.
M&L in replacement of Sub main wiring with 2 run of 6 .0 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in to separate PVC concealed conduit 25 mm dia with all fittings and including 6.0 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB complete all as directed.
S&F in replacement of Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, SPN 08 way, 240 volts with bus bar rating 200 Amps including dust and vermin proof and making all necessary connections complete all as directed.
Supply and fixing in replacement of Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, SPN 12 way, 240 volts with bus bar rating 200 Amps including dust and vermin proof and making all necessary connections complete all as directed.
S&F in replacement of MCB SP, C Curve type, 10 KA, 6 to 32 Amp, with over load and short circuit protection complete all as directed.
S&F in replacement MCB SPN C Curve type, 10 KA, 40 to 63 Amp, with over load and short circuit protection complete all as directed.
Supply and fixing in replacement of MCCB incommer Distribution Board ( Vertical Load line DB) double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, VTPN 04 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCCB as incommer and MCB as outgoing and making all necessary connections and taking out the old unserviceable DB complete all as directed.
S&F in replacement of MCCB 3P 125 Amp with breaking capacity 16 KA suitable for 415 volts AC supply, with over load and short circuit protection complete all as specified.
Material and labour for earthing complete with GI earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground not less than 2.25 mtrs below ground level with top edge of plate not less than 1.5 mtr deep below normal ground level connected to galvinised earth wire 4 mm by means of nuts, bolts and check nut to earth plate and to main board or DB including necessary PCC 1:2:4 type B-1 pit, cover frame , GI pipe 15 mm dia light grade for protection and GI pipe 20 mm dia medium grade for watering with funnel, wire mesh, salt and charcoal dust all over the plate all as specified and as directed.
M/s Shubh Enterprises
VIKRANT CONSTRUCTION CO.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .