SPECIAL REPAIR TO NMRL BUILDING (BUIDLING NO.189), NAVAL DOCKYARD, MUMBAI.

Select, Excess (+), Less (-) Less (-)

Tender Inviting Authority: COMMANDER WORKS ENGINEER (NAVAL WORKS) MUMBAI

Name of Work : SPECIAL REAPAIR TO NMRL BUILDING (BUILDING NO.189) NAVAL DOCKYARD , MUMBAI

Contract No: 8537/CWE (NW) MUMBAI/E8

Sl. No. Item Code / Make Quantity Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category

1 SCHEDULE 'A' PART I (B/R WORKS): M&L for errecting steel tubular props of requied height, L head or flat head braced at center and supporting a continous 2"X3" wooden runner, resting on wedge and block, minimum capacity 3 Ton to support the structure provisionally during repair and etc. and jacketing maintain them in position till requied item etc. The props are erected in perfect vertical in plumb taking/transfering the load equally/uniformly. The location of every prop should be one over another floor and it should be eccentric. The tightening of every prop should be uniform to all props to strain the building uniformly, removing the same as and when directed by structural Engineer/site Engineer. The work should be carried out with all the safety belt and adequate labour insurance under the supervision of qualified supervisor and remove the same completion of work etc. complete all as specified and directed. 500 Each 0.0000 Excess(+) Full Conversion INR

2 Chipping off existing loose, damaged Concrete from RCC members of all affected RCC Columns, Beams, Slabs and Chajjas on External and internal facades, etc beyond main reinforcement. (as directed by Engineer-in-charge), carefully with chisel and hammer Providing and applying ‘Rusticide SS’ Rust passivator or equivalent as specified in the Brand Names to existing reinforcement. bars Including wire brushing of reinforcement , cleaning washing of concrete applying two coats of rust preventor paste made out of “Polyalk Fixoprime” or equivalent as specified in the Brand Names and cement in proportion 1:1.5 to existing reinforcement bars and applying bonding coat of paste made out of “Polyalk EP” or equivalent as specified in the Brand Names and cement in proportion 1:1 to concrete and reinforcement substrates complete as directed and applying Ready mix Polymer modified cement mortar of minimum M:40 grade ) to RCC members Including Hand packing, curing and making the surface rough to receive plastering complete all as specified and directed by Engineer-in-charge. Note- Work shall be carried through authorised application only. 960 Sqm 0.0000 Excess(+) Full Conversion INR

3 Material & Labour for Opening and preparing separation cracks occurring at junctions of RCC and masonry surfaces by cutting and forming “V” grooves of width 50 mm to 75 mm (2" to 3") on either side of the crack using cutting machine and carefully chiselling with chisel and hammer all as specified and directed by Engineer-in-charge. Note : 1) The item includes marking of affected areas, removal of loose material, wire brushing, cleaning and washing of concrete and masonry substrates with water jet to obtain a clean and sound surface ready for further treatment, include removing debris outside MD land. 2) Work shall be carried through authorised application only. 730 RM 0.0000 Excess(+) Full Conversion INR

4 Material & Labour for Moistening the cracks and providing and applying bonding coat consisting of “Polyalk EP” or techno commercial equivalent mixed with cement in proportion 1:1 on prepared surfaces. Filling cracks/grooves with polymer modified cement mortar made with “Polyalk EP” or equivalent in proportion 1:5:15 (Polyalk EP : Cement : Graded sand/quartz sand), including hand packing, finishing flush with existing plaster surface, curing and surface finishing complete, all as specified and directed by the Engineer-in-Charge. Note- Work shall be carried through authorised application only. 730 RM 0.0000 Excess(+) Full Conversion INR

5 Material & Labour for Drilling holes up to 16 mm diameter and 50 mm depth in concrete including cleaning of holes complete, all as specified and directed by the Engineer-in-Charge. 2630 Each 0.0000 Excess(+) Full Conversion INR

6 M & L for Providing and fixing 12 mm dia aluminium/PVC injection nipples and injecting cementitious grout using “CEBEX-112” additive of Fosroc @ 225 gm per bag of cement through suitable mechanical pump/gun including mixing, fixing, grouting and finishing complete, all as specified and directed by the Engineer-in-Charge. 2630 Each 0.0000 Excess(+) Full Conversion INR

7 M & L for Providing and fixing epoxy coated/dipped shear keys of 10 mm dia and 100 mm to 150 mm length in RCC columns before jacketing/micro concreting complete, all asdirected by the Engineer-in-Charge. 1340 Each 0.0000 Excess(+) Full Conversion INR

8 M & L for Providing, cutting, bending and fixing additional TMT(CRS) reinforcement of required sizes and shapes in the form of main bars, stirrups, rings, distribution bars etc., including tying with GI/annealed binding wire to shear connectors, applying two coats of approved anti-corrosive protective coating to reinforcement with dry sand sprinkling on second coat, and providing necessary cover blocks complete, all as specified and directed by the Engineer-in-Charge. 2340 Kgs 0.0000 Excess(+) Full Conversion INR

9 M & L for providing and laying free flow/super fluid micro concrete of minimum M-40 grade such as “Roffecrete Repairs” or technocommercial equivalent approved make in beam bottoms, columns, slabs and other RCC members, including mixing with 5 mm to 10 mm graded stoen aggregates, providing waterproof plywood/steel plate shuttering, pouring, tamping, consolidating, finishing and curing complete as per manufacturer’s specifications .The rate shall include chipping of damaged concrete, surface preparation, cleaning of reinforcement, rust removal and anti-corrosive treatment complete as specified and directed by the Engineer-in-Charge. Note : Measurement and payment shall be made on actual quantity of micro concrete consumed. 49950 Kgs 0.0000 Excess(+) Full Conversion INR

10 M & L for Providing, injecting and grouting High molecular weight Super Low Viscous (3 to 5 cps) 0.56 Kg/cm2 Epoxy Thermoset Resin Monopol (Krishna Conchem or techno-commercial equivalent) for Slab/Beams/Columns in appropriate proportion as per manufacturer’s specifications into cracks / honeycomb area of concrete including drilling minimum 50 mm deep holes of required dia. in concrete, fixing nipples 8 / 10mm dia., injecting grout by suitable gun / pump at 1.0 to 2.0 Kg/cm2 pressure and subsequent cutting / removal of the nipples and sealing of the hole and groove after completion of grouting with cement / epoxy mortar as directed by the Engineer in-charge. Note : Rates to include searching the cracks, opening the same, fixing the nozzles & making all other provisions as per the manufacturer specification/ instructions to make the water tight structure of the affected area. 200 Each 0.0000 Excess(+) Full Conversion INR

11 Material & Labour for Brick work with common burnt clay,machine moulded,perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure in cement mortar 1:6 (1 cement : 6 coarse sand), including raking out joints, curing, scaffolding and all complete as specified and directed by the Engineer-in-Charge. 2 Cum 0.0000 Excess(+) Full Conversion INR

12 Demolition of cement concrete (unreinforced) or lime concrete in ground floors and pavings, n exc 15 cm thickness (below or above ground level), including any floor finish (such as china mosaic, etc.), and removal of all rubbish and debris off MD premises, complete all as specified and directed. 30 Cum 0.0000 Excess(+) Full Conversion INR

13 M&L for providing 15 mm thick cement plaster as protective layer in cement mortar 1:4 (1 cement : 4 coarse sand) admixed with approved waterproofing compound @ 200 ml per 50 kg of cement, including surface preparation, finishing, curing complete as specified and directed by the Engineer-in-Charge. 80 Sqm 0.0000 Excess(+) Full Conversion INR

14 Material and Labour for APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3 mm thick reinforced with polyester non-woven fabric (wt. not less than 150 g/sqm), laid on primed surface by forced application, including cleaning surfaces and applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m, complete all as specified and directed. 80 Sqm 0.0000 Excess(+) Full Conversion INR

15 Material and Labour for cement concrete 1:7:12, type F-2 (using 40 mm graded brick aggregate) in foundations, filling and mass concrete, including finishing exposed surfaces even and fair without using extra cement, complete all as specified and directed. 25 Cum 0.0000 Excess(+) Full Conversion INR

16 Material and Labour for 75 mm thick ,Plain cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) in sub-floors, sub-bases, floors and pavings, etc., including finishing surfaces even and rough to receive the topping layer, complete all as specified and directed. 60 Sqm 0.0000 Excess(+) Full Conversion INR

17 Material and Labour for 25 mm thick, Plain cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) in , floors and pavings, etc., including finishing exposed surfaces even and smooth,without using extra cement complete all as specified and directed. 285 Sqm 0.0000 Excess(+) Full Conversion INR

18 S&F 50 mm bore GI spout, light grade, 600 mm long,including making hole in brick/concrete and embedding,sealing the pipe/hole with PCC 1:2:4 Type B0, complete as specified and directed by the Engineer-in-Charge. 35 Each 0.0000 Excess(+) Full Conversion INR

19 Supplying and fixing in repairs, Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), complete all as specified and directed. 35 Each 0.0000 Excess(+) Full Conversion INR

20 Supplying and fixing in repairs, Plastic water closet seat, black or white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed. 35 Each 0.0000 Excess(+) Full Conversion INR

21 Supplying and fixing in repairs, PVC valveless, syphonic action type, flushing cistern, low level, white, for 10 litres capacity, with inlet, ball valve, float and handle including CI brackets, complete all as specified and directed. 35 Each 0.0000 Excess(+) Full Conversion INR

22 Supplying and fixing in repairs, PVC connection, 15 mm size, with PTMT nuts, 600 mm long, complete all as specified and directed. 35 Each 0.0000 Excess(+) Full Conversion INR

23 Taking down cement or cement lime plaster, any description, on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., including all necessary lowering, etc., and removal of rubbish off MD premises, complete all as specified and directed. 1250 Sqm 0.0000 Excess(+) Full Conversion INR

24 Material and Labour for rendering 15 mm thick in cement mortar 1:6 on fair faces of brickwork or concrete surfaces of wall, including finishing the surface even and smooth without using extra cement, complete all as specified and directed. 500 Sqm 0.0000 Excess(+) Full Conversion INR

25 Material and Labour for rendering 5 mm thick in cement mortar 1:3 on concrete surfaces as in ceilings, finished even and smooth without using extra cement, complete all as specified and directed. 250 Sqm 0.0000 Excess(+) Full Conversion INR

26 M&L for rendering 15 mm thick pre-polymer modified ready mixed cement based plaster in two coats comprising 10 mm thick base coat and 5 mm thick finishing coat, using factory prepared polymer modified plaster having cement:sand composition not less than 1:4 with fully treated, dry and well graded natural sand conforming to IS:383, suitable for external plastering.The item includes mechanical mixing with water in metallic trays as per manufacturer’s specifications, preparation and application over exterior masonry and concrete surfaces, forming grooves and corners to match existing profile using richer mix wherever required, providing necessary two-legged MS pipe scaffolding up to G+3 floor level, curing, finishing complete as specified and directed by the Engineer-in-Charge. 500 Sqm 0.0000 Excess(+) Full Conversion INR

27 Material and Labour for preparation of new plastered surafces of ceiling and applying three coats of white wash complete all as specified and directed. 250 Sqm 0.0000 Excess(+) Full Conversion INR

28 Material and Labour for preparation of newly plastered surfaces of walls, applying a 3 mm thick wall care putty, and applying coat of alkali-resistant priming paint and two coats of oil-emulsion distemper, of required tint or shade, complete all as specified and directed. 500 Sqm 0.0000 Excess(+) Full Conversion INR

29 Material and Labour for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and directed. Note- Work shall be carried through authorised application only. 500 Sqm 0.0000 Excess(+) Full Conversion INR

30 Material & Labour for Repairing damaged edges of concrete chajjas, facias, slabs, columns and similar RCC members by providing PCC 1:2:4 Type B-0 including necessary formwork and 15 mm thick cement plaster in CM 1:3 after applying cement paste @ 3 kg/sqm on prepared surfaces, finished even and fair in patches not exceeding 450 mm width, including removal of loose/swollen plaster or concrete and all complete as specified and directed by the Engineer-in-Charge. 75 RM 0.0000 Excess(+) Full Conversion INR

31 M & L for Rounding to edges of stone slabs, one edge, such as in steps, cooking platforms, and other similar situations, complete all as specified and directed. 50 RM 0.0000 Excess(+) Full Conversion INR

32 Dismantling floor, hearth or wall tiling, including cement mortar bedding (but not backing),including removal of rubbish off MD premises, complete all as specified and directed. 1225 Sqm 0.0000 Excess(+) Full Conversion INR

33 Material and Labour for Vitrified Ceramic tiles, Double Charged, 9-10 mm thick, area of each tile not exceeding 0.36 sqm, polished, in floors, set and jointed in neat cement paste and pointed in white or coloured cement to match, over and including a 20 mm thick screed bed (or bedding layer) of cement mortar (1:4), complete all as specified and directed. Note : Engr-in-Charge will select sample from latest catalouge. 500 Sqm 0.0000 Excess(+) Full Conversion INR

34 Material and Labour for Vitrified Ceramic tiles, Double Charged, 9-10 mm thick, area of each tile not exceeding 0.36 sqm, polished, as in skirting, dados and vertical surfaces, set and jointed in neat cement paste and pointed in white or coloured cement to match, over and including a 10 mm thick backing coat (rendering) in cement mortar (1:3), complete all as specified and directed.. Note : Engr-in-Charge will select sample from latest catalouge. 50 Sqm 0.0000 Excess(+) Full Conversion INR

35 Material and Labour for non-skid Ceramic tiles, coloured, 7 to 8 mm thick, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors, set and jointed in neat cement paste and pointed in coloured cement to match, over and including ,15 mm thick screed bed (or bedding layer) of cement mortar (1:6), complete all as specified and directed. 225 Sqm 0.0000 Excess(+) Full Conversion INR

36 Material and Labour for coloured glazed ceramic tiles, size 450 x 300 mm, 7 to 8 mm thick, in vertical surfaces (skirting and dados), set and jointed in neat cement paste and pointed in white or coloured cement to match, over and including 10 mm thick backing coat in cement mortar 1:4, complete all as specified and directed. 450 Sqm 0.0000 Excess(+) Full Conversion INR

37 Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, and including removal of all rubbish and debris off MD premises, complete all as specified and directed. 1090 Sqm 0.0000 Excess(+) Full Conversion INR

38 S&F aluminium anodized snap grid of size 605 x 605 mm with aluminium anodized angle 20mm x 20mm x 1.2mm fixed along the wall and main and cross tees of size 36.5mm x 23.5mm x 1.5mm and 23.5mm x 23.5mm x 1.5mm respectively with ceiling cleats / angle brackets of size 15mm x 15mm x 1.5mm including suspended GI wire hangers 6mm dia.upto 1200mm length with adjusting level and fixed to roof slabs by means of ceiling cleats made out of GI flat 40mm x 3mm x 60mm long and expansion hold fasteners 12.5mm dia. 40mm long @ 20cm c/c including dismantling carefully old false ceiling with ceiling boards, electrical fittings, fan, fire sencers etc and making good disturbed surface as per existing complete all as specified and directed. Note- New ceiling board will be measured & paid separately 940 Sqm 0.0000 Excess(+) Full Conversion INR

39 Supplying and fixing Hangers 6 mm dia. G.I. (upto 1200 mm length), adjusting level, fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia. 40 mm long, complete all as specified and directed. 940 Sqm 0.0000 Excess(+) Full Conversion INR

40 Material and Labour for Non-asbestos fibre cement building boards, 4 mm thick, fixed or laid/inserted to timber/GI/Aluminium framework with screws, complete all as specified and directed. 940 Sqm 0.0000 Excess(+) Full Conversion INR

41 Supplying & Fixing in repairs decorative POP false ceiling using 600 × 900 × 12 mm thick plaster of Paris gypsum binder sheets including two coats of plastic emulsion paint and necessary provisions for concealed light fittings, fixed on 22 gauge GI channel grid framework comprising main joists of size 50 × 25 mm spaced at 750 mm c/c and secondary joists of size 75 × 20 mm spaced at 900 mm c/c, suspended from roof members using 25 × 25 × 2 mm GI angle hangers and fasteners at 1.20 m c/c, complete as specified and directed by the Engineer-in-Charge. 100 Sqm 0.0000 Excess(+) Full Conversion INR

42 S&F PVC wall/ceiling panelling comprising 5 mm thick plain colour PVC sheets fixed on PVC framework including solvent cement, necessary fixtures, fasteners and fixing at site complete as per amnufacturer's specifications, and drawings in SSR Part II and directed by the Engineer-in-Charge. 50 Sqm 0.0000 Excess(+) Full Conversion INR

43 S&F in repairs stainless steel plate rack of size 36" × 30" × 12" of grade SS-304, including necessary brackets, screws, fixing arrangements complete as specified and directed by the Engineer-in-Charge. 5 Each 0.0000 Excess(+) Full Conversion INR

44 Supplying and fixing in repairs, Stainless steel sink with draining board, made out of 1.00 mm thick sheet od grade SS-304, for kitchen or laboratory, with plug, washers, and waste pipe, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915 mm x 460 mm and bowl size 410 mm x 330 mm x 160 mm, complete all as specified and directed. 10 Each 0.0000 Excess(+) Full Conversion INR

45 Supplying and fixing in repairs, Prelaminated particle board, interior grade, 12 mm thick, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber framework as in panelling or partitions, complete all as specified and directed. 50 Sqm 0.0000 Excess(+) Full Conversion INR

46 Supplying and fixing in repairs, Prelaminated particle board, exterior grade, 18/19 mm thick, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber framework (such as in cupboards, etc.), including 6 mm thick teak wood beading (lipping) all around, complete all as specified and directed. 150 Sqm 0.0000 Excess(+) Full Conversion INR

47 Supplying and fixing Moulding as in cornices, joints of wall panelling and the like, 1st class hardwood teak, for sectional area not exceeding 6 sq cm, including French polishing, two or more coats, complete all as specified and directed. 100 Rm 0.0000 Excess(+) Full Conversion INR

48 Supply & fixing in repairs powder coated aluminium sections for partitions, windows, ventilators and doors including fabrication of frame/shutters and fixing to walls/floors with necessary lugs, cleats etc including all accessories such as glazing clips, handles, tower bolts, rollers rubber beadings for fixing glass panes in frame including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required complete all as specified Note: - (i) Glass panes will be measured & paid separately. (ii) The rate quoted shall be inclusive of neoprene beading, glazing clips, screws, etc. as required but shall not be measured for arriving of weight. (iii) Minimum thickness of powder coating shall be 25 micron. (iv) The rate shall be inclusive of the locking arrangement including complete packing with silicon gel around contacting surface of aluminium work with matching existing area. (v) The size of aluminium sections shall be as per HQ CE(N) MZ TD drawing No TD/2021/01 to 05. 20 Sqm 0.0000 Excess(+) Full Conversion INR

49 Taking down chowkats or frames with shutters (without taking off shutters from the frames) area n.exc 1.5 sq. m each complete all as specified and directed. 80 Each 0.0000 Excess(+) Full Conversion INR

50 Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exc 1.5 sq. m but n.exc 4 Sqm each, complete all as specified and directed. 25 Each 0.0000 Excess(+) Full Conversion INR

51 Supplying and fixing Anodised aluminium frame for doors, windows and ventilators, with one or more rebates, including joining cleat for fixing etc., finished with powder coating (minimum thickness 50 micron), complete all as specified and directed. 1250 Kg 0.0000 Excess(+) Full Conversion INR

52 S&F in repairs aluminium anodised Deco grill type DG-102, 7.5 mm size, fixed to fanlight/window frames, made of 1.5 mm thick aluminium section with bars of size 6.2 mm × 7.5 mm in required pattern and sizes, including necessary fixtures and fasteners complete all as specified and directed by the Engineer-in-Charge. 150 Sqm 0.0000 Excess(+) Full Conversion INR

53 Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and directed. 300 Sqm 0.0000 Excess(+) Full Conversion INR

54 Material and Labour for Sheet glass, ordinary quality, 4 mm thick, and glazing in squares not exceeding 0.5 sq. m in each pane complete all as specified and directed. 100 Sqm 0.0000 Excess(+) Full Conversion INR

55 Material and Labour for Sheet glass, ordinary quality, 4 mm thick, and glazing in squares exceeding 0.5 sq. m in each pane complete all as specified and directed. 125 Sqm 0.0000 Excess(+) Full Conversion INR

56 S&F in repairs 12 mm thick toughened glass for door shutters, partitions, shelves etc., including necessary fittings and fixtures such as SS handles, studs, pivots and all fixing arrangements complete as specified and directed by the Engineer-in-Charge. 40 Sqm 0.0000 Excess(+) Full Conversion INR

57 S&F stainless steel clamps suitable for toughened glass partitions/doors including necessary fasteners and fixing arrangements complete all as specified and directed by the Engineer-in-Charge. 6 Each 0.0000 Excess(+) Full Conversion INR

58 S&F stainless steel pivot of 75 mm size or as required for toughened glass doors including suitable fixing arrangements complete all as specified and directed by the Engineer-in-Charge. 6 Each 0.0000 Excess(+) Full Conversion INR

59 S&F stainless steel handles of 300 mm size or as required for toughened glass doors including suitable fixing arrangements complete all as specified and directed by the Engineer-in-Charge. 6 Each 0.0000 Excess(+) Full Conversion INR

60 S&F stainless steel mortice lock vertical type of 100 mm size or as required for toughened glass doors including suitable fixing arrangements complete all as specified and directed by the Engineer-in-Charge. 4 Each 0.0000 Excess(+) Full Conversion INR

61 S&F in repairs hydraulically regulated aluminium die-cast body door closer, designation No. 2, universal type suitable for door shutters 701 mm to 850 mm wide and weighing 36 kg to 60 kg complete all as specified and directed by the Engineer-in-Charge. 15 Each 0.0000 Excess(+) Full Conversion INR

62 Supplying and fixing Butt hinges, cast brass, with mild steel hinge pin, bright polished, type B-11, size 100 mm, complete all as specified and directed. 50 Each 0.0000 Excess(+) Full Conversion INR

63 Supplying and fixing Aluminium alloy, anodised, sliding door bolt, 300 mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy ISI marked , complete all as specified and directed. 30 Each 0.0000 Excess(+) Full Conversion INR

64 Supplying and fixing Aluminium anodised, barrel tower bolts of extruded section, size 200 mm ISI marked, complete all as specified and directed. 20 Each 0.0000 Excess(+) Full Conversion INR

65 Supplying and fixing Extruded aluminium alloy handles, fabricated type, anodised, size 200 mm ISI marked, complete all as specified and directed. 20 Each 0.0000 Excess(+) Full Conversion INR

66 Supplying and fixing Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, size 150 mm ISI marked, complete all as specified and directed. 15 Each 0.0000 Excess(+) Full Conversion INR

67 Demolition and breaking up drain pipes (Salt glazed ware, reinforced cement concrete or PVC pipes), including removal of all rubbish and debris off MD premises, complete all as specified and directed. 320 Rm 0.0000 Excess(+) Full Conversion INR

68 Supply & Fixing 160mm bore PVC ( SWR) grade pipes, single socketed in any length with rubber ring joints fixed to walls with dash through fastners and rain water bracket spacing 1.5m c/c as per CE (Navy) Mumbai TD No TD/2023/01 or laid in floor complete all as specified. 100 Rm 0.0000 Excess(+) Full Conversion INR

69 Supply & Fixing 110mm bore PVC ( SWR) grade pipes, single socketed in any length with rubber ring joints fixed to walls with dash through fastners and rain water bracket spacing 1.5m c/c as per CE (Navy) Mumbai TD No TD/2023/01 or laid in floor complete all as specified. 120 Rm 0.0000 Excess(+) Full Conversion INR

70 Supply & Fixing 75mm bore PVC ( SWR) grade pipes, single socketed in any length with rubber ring joints fixed to walls with dash through fastners and rain water bracket spacing 1.5m c/c as per CE (Navy) Mumbai TD No TD/2023/01 or laid in floor complete all as specified. 100 Rm 0.0000 Excess(+) Full Conversion INR

71 Supplying and fixing PVC (SWR) bends, any radius, 160 mm bore, complete all as specified and directed. 10 Each 0.0000 Excess(+) Full Conversion INR

72 Supplying and fixing PVC (SWR) bends, any radius, 110 mm bore, complete all as specified and directed. 10 Each 0.0000 Excess(+) Full Conversion INR

73 Supplying and fixing PVC (SWR) bends, any radius, 75 mm bore, complete all as specified and directed. 10 Each 0.0000 Excess(+) Full Conversion INR

74 Taking up or down steel tubing and connections, 15 mm bore, and making good disturbed as per exiting, complete all as specified and directed. 100 RM 0.0000 Excess(+) Full Conversion INR

75 Taking up or down steel tubing and connections, 20 mm bore, and making good disturbed as per exiting, complete all as specified and directed. 50 RM 0.0000 Excess(+) Full Conversion INR

76 Material and Labour for galvanised steel tubing, medium grade, with all fittings, 15 mm bore, fixed complete to walls and ceilings,with suitable size GI clamps complete all as specified and directed. 100 RM 0.0000 Excess(+) Full Conversion INR

77 Material and Labour for galvanised steel tubing, medium grade, with all fittings, 20 mm bore, fixed complete to walls and ceilings,with suitable size GI clamps complete all as specified and directed. 50 RM 0.0000 Excess(+) Full Conversion INR

78 Dismantling stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness including removing debris outside MD land complete all as specified and directed. 84 X Sqm 0.0000 Excess(+) Full Conversion INR

79 M & L for Providing and laying 60 mm thick factory made chamfered edge cement concrete interlocking paver blocks, of M-35 Grade, any shape and size conforming to IS 15658-2006, manufactured with grey cement and pigment, laid in required colour and pattern over and including 50 mm thick compacted bed of fine sand, including compacting and proper embedding/laying into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand, complete all as specified and directed. 100 Sqm 0.0000 Excess(+) Full Conversion INR

80 M & L for Hard wear stone Granite (of any type) work (table rubbed and polished), 20 mm thick, in floors, steps, jambs, pillars, window-cills, cooking platforms and the like, set and jointed in cement mortar (1:4), and pointed in white cement (1:2) using marble dust with admixture of pigment to match the shade, over and including 15 mm thick screed bed (or bedding layer) of cement mortar 1:4, complete all as specified and directed. 600 Sqm 0.0000 Excess(+) Full Conversion INR

81 M & L for Hard wear stone Granite (of any type) work (table rubbed and polished), 20 mm thick, as in skirting, dados and vertical surfaces, set and jointed in cement mortar (1:4), and pointed in white cement (1:2) using marble dust with admixture of pigment to match the shade, over and including 10 mm thick backing coat (rendering) in cement mortar 1:3, complete all as specified and directed. 140 Sqm 0.0000 Excess(+) Full Conversion INR

82 M & L for Grinding and polishing existing floor surfaces of any type such as Kota stone, mosaic, Cuddapah stone or similar flooring, including surface preparation, machine grinding, polishing and finishing complete all as specified and directed by the Engineer-in-Charge. 100 Sqm 0.0000 Excess(+) Full Conversion INR

83 M & L for 18-20mm thick, machine cut, Kota stone slab, as in floors, steps, landing etc laid over and inckluding 20 mm Screed bed in CM (1:4). set and jointed in neat cement paste and pointed in coloured cement to match the shade of slab, including cutting, polishing as specified in SSR part I etc. complete all as specified. 100 Sqm 0.0000 Excess(+) Full Conversion INR

84 M &L for machine cut kota stone slab 18 to 20 mm thick as in vertical surfaces such as skirting,dadi etc laid /fixed over 15 mm thick backing coat in CM (1:4) jointed and pointed with grey cement paste mixed with pigment to match the shade of the slab including rubbing, polishing complete all as specified and directed. 50 Sqm 0.0000 Excess(+) Full Conversion INR

85 Material and Labour for preparation of old or previously untreated, plastered or unplastered surfaces of walls by washing, rubbing down and stopping of distempered or painted surfaces, and applying one subsequent coat of oil-emulsion distemper, of required tint or shade, complete all as specified and directed. 3175 Sqm 0.0000 Excess(+) Full Conversion INR

86 M&L for preaparation of wall surfaces, including preparation of surfaces by brooming, steel wire brushing, scraping down soot, moulds, moss, efflorescence, oil and greasy spots and applying one coat of acrylic antifungal paint (100% acrylic) including necessary scaffolding and safety arrangements all complete as specified and directed by the Engineer-in-Charge. 3000 Sqm 0.0000 Excess(+) Full Conversion INR

87 PART II E/M WORKS : Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing Material to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. as directed by Engineer-in-Charge 999 Point 0.0000 Excess(+) Full Conversion INR

88 M & L for concealed point wiring complete with proper colur coding using 1.5 Sqmm PVC insulated,unhseathed multistranded copper conductor cable 1100 volts grade,ISI marked,FRLS grade drawn through and including non metallic PVC conduit not less than 25 mm dia with all accessories such as bends,elbows,reducers,junction boxes including one run of 1.5 Sqmm PVC insulated unsheathed multi stranded copper conductor cable,1100 volts,ISI marked ,FRLS grade as earth continuity conductor connected to common eath dolly with and including required number , size of modular box concealed in wall with cover plate ,frame of any module complete all as specified and directed by Engineer-in-charge. Notes: a) Colour coding shall be followed as given below:- i) Phase - Red ii) Neutral - Black iii) Earth - Green b) Electrical wiring above false ceiling shall be drawn through medium grade PVC conduit. (b) PVC Casing Capping will be used where PVC conduit not feasible. (c) Cutting chases for concealing the conduit and making good of disturbed surfaces as per existing in CM (1:3) shall be included in quoted rate. 0.0000 Excess(+) Full Conversion INR

88.01 One light point controlled by one switch 438 Point 0.0000 Excess(+) Full Conversion INR

One fan point or exhaust fan point controlled by one switch. 170 Point 0.0000 Excess(+) Full Conversion INR

One Bell point control by one 5A bell push/ switch 20 Point 0.0000 Excess(+) Full Conversion INR

One 3-pin socket outlet, 5 Amps, on the same board with other switches. 85 Point 0.0000 Excess(+) Full Conversion INR

One 3-pin socket outlet, 5 Amps on independent board. 172 Point 0.0000 Excess(+) Full Conversion INR

89 M & L for concealed point wiring complete with proper colur coding using 2.5 Sqmm PVC insulated,unhseathed multistranded copper conductor cable 1100 volts grade,ISI marked,FRLS grade drawn through and including non metallic PVC conduit not less than 25 mm dia with all accessories such as bends,elbows,reducers,junction boxes including one run of 2.5 Sqmm PVC insulated unsheathed multi stranded copper conductor cable,1100 volts,ISI marked ,FRLS grade as earth continuity conductor connected to common eath dolly for single board having one 15 amp switch with and including required number , size of modular box concealed in wall with cover plate ,frame of any module complete all as specified and directed by Engineer-in-charge. Notes: a) Colour coding shall be followed as given below:- i) Phase - Red ii) Neutral - Black iii) Earth - Green b) Electrical wiring above false ceiling shall be drawn through medium grade PVC conduit. (b) PVC Casing Capping will be used where PVC conduit not feasible. (c) Cutting chases for concealing the conduit and making good of disturbed surfaces as per existing in CM (1:3) shall be included in quoted rate. 51 Point 0.0000 Excess(+) Full Conversion INR

90 M & L for concealed point wiring complete with proper colur coding using 4.0 Sqmm PVC insulated,unhseathed multistranded copper conductor cable 1100 volts grade,ISI marked,FRLS grade drawn through and including non metallic PVC conduit not less than 25 mm dia with all accessories such as bends,elbows,reducers,junction boxes including one run of 4.0 Sqmm PVC insulated unsheathed multi stranded copper conductor cable,1100 volts,ISI marked ,FRLS grade as earth continuity conductor connected to common eath dolly with and including required number , size of modular box concealed in wall with cover plate ,frame of any module complete necessary electric connection for each workstation point comprising of one 6A socket and one 15A socket on same board all as specified and directed by Engineer-in-charge. Notes: a) Colour coding shall be followed as given below:- i) Phase - Red ii) Neutral - Black iii) Earth - Green b) Electrical wiring above false ceiling shall be drawn through medium grade PVC conduit. (b) PVC Casing Capping will be used where PVC conduit not feasible. (c) Cutting chases for concealing the conduit and making good of disturbed surfaces as per existing in CM (1:3) shall be included in quoted rate. 63 Per point 0.0000 Excess(+) Full Conversion INR

91 S&F ceiling rose, surface mounted bakelite type, size 65 mm × 50 mm, flush type with 3 terminals complete all as specified and directed by the Engineer-in-Charge. 608 Each 0.0000 Excess(+) Full Conversion INR

92 Supplying and fixing modular switch, 1-way, 6 Amps, 1 module, complete all as specified and directed. 928 Each 0.0000 Excess(+) Full Conversion INR

93 Supplying and fixing modular switch, 1-way, 16 Amps, 1 module, complete all as specified and directed. 114 Each 0.0000 Excess(+) Full Conversion INR

94 Supplying and fixing modular socket, 6 Amps, 2/3 pin combined, 2 module, complete all as specified and directed. 320 Each 0.0000 Excess(+) Full Conversion INR

95 Supplying and fixing modular socket, 6/16 Amps, 2/3 pin combined, 2 module, complete all as specified and directed. 114 Each 0.0000 Excess(+) Full Conversion INR

96 Supplying and fixing modular fan step regulator, 120 Watts, 2 module, complete all as specified and directed. 106 Each 0.0000 Excess(+) Full Conversion INR

97 Supplying and fixing modular bell push, 6 Amps, 1 module, complete all as specified and directed. 20 Each 0.0000 Excess(+) Full Conversion INR

98 Supplying and fixing buzzer, Ding Dong, AC 230 Volts, single pole, complete all as specified and directed. 20 Each 0.0000 Excess(+) Full Conversion INR

99 S&F in repairs hanger clamp assembly with down rod up to 3 feet long for suspension of ceiling fan, including nuts, bolts, washers, split pin, canopy and all necessary fixing accessories complete all as specified and directed by the Engineer-in-Charge. 95 Each 0.0000 Excess(+) Full Conversion INR

100 Disconnecting and taking down the fan and Overhauling of ceiling fan any size and make, dismantling parts, properly cleaning/removing old existing grease oil and applying new oil grease, varnishing of winding, cleaning dust, rust and applying two coats of white synthetic enamel paint over a coat of steel primer, assembling and refixing at same position complete all as specified. 50 Each 0.0000 Excess(+) Full Conversion INR

101 Supply and fixing BLDC ceiling fan, 1200 mm sweep, BEE 5 Star rated, single phase, 230V complete with blades, down rod, canopy, shackle, electronic regulator/remote control unit and all accessories including providing suitable size copper conductor cable including connections, testing and commissioning complete all as specified and directed by the Engineer-in-Charge. 56 Each 0.0000 Excess(+) Full Conversion INR

102 M & L for Disconnecting and taking down the fan and Overhauling of exhaust fan, any size and make, including disconnecting, taking down, dismantling parts, cleaning and removing old grease and oil, applying new grease and oil, varnishing of winding, cleaning dust and rust, applying one coat of steel primer and two coats of synthetic enamel paint, re-assembling and re-fixing in position, including electrical connection with the existing system, testing and commissioning, complete all as specified and directed. 36 Each 0.0000 Excess(+) Full Conversion INR

103 Disconnecting and taking down wall mounted fan of any size and make for overhauling, including dismantling of components, cleaning/removal of old grease and oil, applying fresh lubricating oil/grease, varnishing of windings, cleaning dust and rust, applying one coat of steel primer and two coats of grey paint, reassembling and refixing at original position, including testing complete all as specified and directed by the Engineer-in-Charge. 28 Each 0.0000 Excess(+) Full Conversion INR

104 Supply and fixing in repairs new generation 6W LED deep spot light, 3000K warm white,with minimum efficiancy 120 Lumen/watt complete with integral driver suitable for modular/POP/gypsum ceiling, providing high quality energy efficient lighting, including all accessories, connections and fixing complete all as specified and directed by the Engineer-in-Charge. 62 Each 0.0000 Excess(+) Full Conversion INR

105 Supply and fixing in repairs new generation 18/20W LED with minimum efficiancy 120 Lumen/watt downlight fitting with pressure die-cast aluminium housing, providing high quality energy efficient lighting, complete with driver, diffuser, accessories, connections and fixing arrangements all as specified and directed by the Engineer-in-Charge. 56 Each 0.0000 Excess(+) Full Conversion INR

106 Supply, fixing and testing of battery powered LED exit signage operating on 220–240V, 50Hz with 2W LED illumination, with minimum efficiancy 120 Lumen/watt, minimum 3 hours battery backup, suitable for operating temperature range of -5°C to +45°C, including all accessories, connections and fixing complete all as specified and directed by the Engineer-in-Charge. Note: Exit signage may be replaced with other directional signage as per site requirement. 20 Each 0.0000 Excess(+) Full Conversion INR

107 Supply and fixing battery powered surface mounted LED downlighter operating on 220–240V, 50Hz having 12 × 1.5W LEDs with minimum efficacy of 120 lumen/Watt and minimum 3 hours battery backup, suitable for operating temperature range of -5°C to +45°C, including all accessories, connections and fixing complete all as specified and directed by the Engineer-in-Charge. 20 Each 0.0000 Excess(+) Full Conversion INR

108 Supply and fixing in repairs recessed type ultra-slim LED panel luminaire, 2' × 2', 36W, having minimum efficacy of 120 lumen/Watt, suitable for 600 × 600 mm modular/POP/gypsum ceiling, complete with CRCA powder coated housing, high translucent diffuser, internal driver, connections and fixing arrangements providing energy efficient illumination complete all as specified and directed by the Engineer-in-Charge. 137 Each 0.0000 Excess(+) Full Conversion INR

109 Supply and fixing in repairs wall/surface mounted 1 × 20W LED batten fitting, 4 feet long, having minimum efficacy of 120 lumen/Watt, complete with all accessories, internally pre-wired, including fixing on wall/ceiling using suitable PVC round blocks and connecting with twin core flexible copper conductor cable of suitable size complete all as specified and directed by the Engineer-in-Charge. 132 Each 0.0000 Excess(+) Full Conversion INR

110 Fixing only serviceable LED light fittings (such as panel lights, batten fittings or any type), including electrical connection with the electrical system and all Material required for the same, including cutting holes and making good all work disturbed to match existing, complete all as specified and directed. 25 Each 0.0000 Excess(+) Full Conversion INR

111 Supply and fixing in repairs LED street/building security light fitting of 60W capacity with minimum efficacy 120 Lumen/Watt, high pressure die-cast aluminium housing, toughened glass cover, individual LEDs with secondary optics, IP-66 protection, complete with all accessories, connections, testing and commissioning all as specified and directed by the Engineer-in-Charge. 10 Each 0.0000 Excess(+) Full Conversion INR

112 Supply and fixing in repairs MS arm bracket, 30° bend, 1.50 m long suitable for mounting one street light fitting, including clamps, nuts, bolts and washers for proper fixing, duly painted with two coats of synthetic enamel paint in silver colour over red oxide primer, complete all as specified and directed by the Engineer-in-Charge. 10 Each 0.0000 Excess(+) Full Conversion INR

113 Material and labour for concealed sub-main wiring using 2 runs of 2.5 sq.mm FRLS grade PVC insulated unsheathed multistranded copper conductor cable, 1100V grade, drawn through and include heavy duty PVC conduit with all accessories such as bends, tees, junction boxes, reducers etc., including one run of 2.5 sq.mm green colour multi stranded copper conductor cable FRLS grade as earth continuity conductor, including taking down existing sub main wiring complete as specified and directed by the Engineer-in-Charge. Notes: 1)Colour coding shall be maintained as: Phase – Red, Neutral – Black, Earth – Green. 2). Cutting chases for concealing the conduit and making good of disturbed surfaces as per existing in CM (1:3) shall be included in quoted rate. 3) 3 runs of cable and one run of conduit shall be measured and paid as one unit only. 270 RM 0.0000 Excess(+) Full Conversion INR

114 Material and labour for concealed sub-main wiring using 2 runs of 4.0 sq.mm FRLS grade PVC insulated unsheathed multistranded copper conductor cable, 1100V grade, drawn through and include heavy duty PVC conduit with all accessories such as bends, tees, junction boxes, reducers etc., including one run of 4.0 sq.mm green colour multi stranded copper conductor cable FRLS grade as earth continuity conductor, including taking down existing sub main wiring complete as specified and directed by the Engineer-in-Charge. Notes: 1)Colour coding shall be maintained as: Phase – Red, Neutral – Black, Earth – Green. 2). Cutting chases for concealing the conduit and making good of disturbed surfaces as per existing in CM (1:3) shall be included in quoted rate. 3) 3 runs of cable and one run of conduit shall be measured and paid as one unit only. 915 RM 0.0000 Excess(+) Full Conversion INR

115 MatMaterial and labour for concealed sub-main wiring using 2 runs of 6.0 sq.mm FRLS grade PVC insulated unsheathed multistranded copper conductor cable, 1100V grade, drawn through and include heavy duty PVC conduit with all accessories such as bends, tees, junction boxes, reducers etc., including one run of 6.0 sq.mm green colour multi stranded copper conductor cable FRLS grade as earth continuity conductor, including taking down existing sub main wiring complete as specified and directed by the Engineer-in-Charge. Notes: 1)Colour coding shall be maintained as: Phase – Red, Neutral – Black, Earth – Green. 2). Cutting chases for concealing the conduit and making good of disturbed surfaces as per existing in CM (1:3) shall be included in quoted rate. 3) 3 runs of cable and one run of conduit shall be measured and paid as one unit only. 466 RM 0.0000 Excess(+) Full Conversion INR

116 Material and labour for concealed sub-main wiring using 4 runs of 10 sq.mm FRLS grade PVC insulated unsheathed multistranded copper conductor cable, 1100V grade, drawn through and include heavy duty PVC conduit with all accessories such as bends, tees, junction boxes, reducers etc., including Two runs of 10.0 sq.mm green colour multi stranded copper conductor cable FRLS grade as earth continuity conductor, including taking down existing sub main wiring complete as specified and directed by the Engineer-in-Charge. Notes: 1)Colour coding shall be maintained as: Phase – Red, Neutral – Black, Earth – Green. 2). Cutting chases for concealing the conduit and making good of disturbed surfaces as per existing in CM (1:3) shall be included in quoted rate. 3) 6 runs of cable and one run of conduit shall be measured and paid as one unit only. 365 RM 0.0000 Excess(+) Full Conversion INR

117 S&F in repair sheet metal enclosure VTPN 8 Way,415V with 250 A copper busbar, double door type IP-43, IK-09 protection suitable for housing MCCB upto 160 Amp 3 pole incl required numbers of suitable size of gland complete etc all as specified and directed by EIC. Note : DBs shall be conceeled in wall where ever posible including making good the surface to match with surrounding. 11 Each 0.0000 Excess(+) Full Conversion INR

118 Supplying and fixing in repairs, sheet metal enclosure for Distribution Board (DB) for use with MCBs, double door, SPN, 12 way, with 200 Amps rated copper bus bar and making good disturbed surfaces as per existing, complete all as specified and directed. 22 Each 0.0000 Excess(+) Full Conversion INR

119 Supplying and fixing in repairs, Moulded Case Circuit Breaker (MCCB), 4 Pole, 415 V, 16 KA, 100 Amps, complete all as specified and directed. 5 Each 0.0000 Excess(+) Full Conversion INR

120 Supplying and fixing in repairs, Moulded Case Circuit Breaker (MCCB), 4 Pole, 415 V, Adjustable type, 160 Amps, with breaking capacity 36 KA (or as specified), complete all as specified and directed. 6 Each 0.0000 Excess(+) Full Conversion INR

121 Supplying and fixing in repairs, Miniature Circuit Breaker (MCB), TPN, 415V, 10KA, 'C' curve, 63 Amps, in the MCB DB, including connection, testing and commissioning complete all as specified and directed. 5 Each 0.0000 Excess(+) Full Conversion INR

122 Supplying and fixing in repairs, 240V, 10KA 'C' curve Miniature Circuit Breaker (MCB), SPN, 40 to 63 Amps, in the MCB DB, complete all as specified and directed. 22 Each 0.0000 Excess(+) Full Conversion INR

123 Supplying and fixing in repairs, 240V, 10KA 'C' curve Miniature Circuit Breaker (MCB), single pole, 5 to 32 Amps, in the MCB DB, complete all as specified and directed. 340 Each 0.0000 Excess(+) Full Conversion INR

124 Supplying and fixing in repairs, 240V, 10KA 'C' curve Miniature Circuit Breaker (MCB), single pole, 40 Amps, in the MCB DB, complete all as specified and directed. 12 Each 0.0000 Excess(+) Full Conversion INR

125 Supplying and fixing in repairs 4 MM dia GI, earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required, complete all as specified and directed. 65 RM 0.0000 Excess(+) Full Conversion INR

126 Material and labour for repairJEF ECO SAFE Maintenance Free Earthing Solution comprising high tensile low carbon steel earth electrode of 3.0 m length and 32 mm dia with minimum 250 micron molecularly bonded copper coating on outer surface conforming to UL 467, including carbon-based conductive back-fill compound having resistivity less than 0.12 Ohm-m as per Clause 14.5(d) of IEEE-80 standard, complete with earth termination clamp and heavy duty HDPE weatherproof earth pit chamber. The conductive back-fill compound shall be electronically conductive, moisture independent, non-leaching, environment friendly and capable of setting like concrete after mixing with water. The item includes excavation/refilling of earth pit, pouring of back-fill compound, watering, testing and commissioning complete as directed by the Engineer-in-Charge. Note: 1) Back-fill compound shall not be mixed with soil during pouring in bore hole/pit. 2)Contractor shall submit manufacturer’s test certificates for electrode, copper bonding thickness and resistivity of back-fill compound. 3)Rates quoted shall include all excavation, refilling, watering, clamps, connections, testing and incidental works complete. 2 Each 0.0000 Excess(+) Full Conversion INR

127 Supplying and fixing in repairs, 25 X 4mm galvanised iron strip earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to panel body, motor body or any other equipment as required, complete all as specified and directed. 35 RM 0.0000 Excess(+) Full Conversion INR

128 Supplying and laying in repairs, XLPE insulated, armoured heavy duty electric power cable with stranded aluminium conductor, 1100 Volts grade of size 50 sq. mm, 3½ core,complete all as specified and directed. 100 RM 0.0000 Excess(+) Full Conversion INR

129 S&F in repairs GI perforated cable tray of size 250 mm × 50 mm made from 2 mm thick GI sheet, including prefabricated GI clamps/supports suitable for wall mounting, complete with 0.71 mm thick aluminium sheet cover (Alloy 31000 H4) in ridges, hips and valley gutter profile for cable trunking, fixed vertically or horizontally on brick/stone walls, including all accessories, cutting, bending, shaping, drilling, welding and fixing arrangements complete all as specified and directed by the Engineer-in-Charge. 40 RM 0.0000 Excess(+) Full Conversion INR

130 PART III AIR CONDITIONING WORKS : M&L for taking down split/window AC units from existing position, depositing at store during repair works and refixing at same location including necessary accessories such as prefabricated indoor/outdoor stands, brazing of existing copper piping, leak testing, servicing, spray painting of outdoor units, testing and commissioning complete all as specified and directed by the Engineer-in-Charge. Note: The quoted rate shall be deemed to include cost of crane/scaffolding or any other arrangement required for dismantling and refixing outdoor units fixed on external walls along with stands and fasteners. 58 Each 0.0000 Excess(+) Full Conversion INR

131 M&L for providing covered MS stand fabricated from suitable size and gauge MS sections/angles for mounting outdoor AC units on external walls of building, including nuts, bolts, fasteners and fixing arrangements complete all as specified and directed by the Engineer-in-Charge. Note: (i) Design and size of stand shall be approved by the Engineer-in-Charge. (ii) Rate shall include plastering, PCC and making good disturbed surfaces to match existing finish. 58 Each job 0.0000 Excess(+) Full Conversion INR

132 Supply and fixing in repairs insulated copper tubing of suitable diameter for suction and liquid discharge lines of AC units, including insulation, brazing, making holes in walls for passing pipes and making good of disturbed surfaces as per existing complete all as specified and directed by the Engineer-in-Charge. 480 RM 0.0000 Excess(+) Full Conversion INR

133 Supplying and fixing in repairs, Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB, 240 V, 20 Amps, making good of all work disturbed surfaces as per existing , complete all as specified and directed. 58 Each 0.0000 Excess(+) Full Conversion INR

134 S&F rigid non-metallic PVC conduit heavy duty 25 mm dia for AC drain water line, fixed on external walls/roofs at any height, including all tees, bends, elbows, reducers, mouth tube ends and fixing accessories such as GI saddles, fully threaded screws and nylon rawl plugs complete all as specified and directed by the Engineer-in-Charge. Note: Rate quoted shall be deemed to include cost of crane/scaffolding or any other arrangement required for fixing PVC conduit at any height on external walls of the building. 400 RM 0.0000 Excess(+) Full Conversion INR

135 S&F rigid non-metallic PVC conduit heavy duty 50 mm dia, ISI marked, for AC drain water line, fixed on walls/roofs including all tees, bends, elbows, reducers, mouth tube ends and fixing accessories such as GI saddles, fully threaded screws and nylon rawl plugs complete all as specified and directed by the Engineer-in-Charge. Note: Rate quoted shall be deemed to include cost of crane/scaffolding or any other arrangement required for fixing PVC conduit at any height on external walls of the building. 180 RM 0.0000 Excess(+) Full Conversion INR

136 Note for all items above 1)The tenderer shall note that before quoting his unit rates, all items of work shall be executed in a high-rise building and shall include provision of necessary scaffolding and safety measures. 2)Debris shall be removed from time to time as directed by the Engineer-in-Charge. 3)Any damage caused to the RCC structure or adjoining portions during demolition or dismantling, due to negligence of the contractor, shall be made good by the contractor at his own expense. 4)Safety Precaution: Necessary safety precautions for men, material and structures shall be taken by the contractor during execution of work. 5)Necessary steel scaffolding shall be provided by the contractor for multistoried buildings. The contractor shall ensure that all workmen wear safety belts at all times. 6) The quoted rate for all items shall be deemed to include compliance with all the above conditions. 0.0000 Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures Select

Please Enable Macros to View BoQ information