Repair work on drains culverts, interlocking tiles CC surfaces and ramps at various locations in Ward 7

Dismantling cement concrete or brick work including stacking of materials as directed by the Engineer-in-charge within a distance of 60 metre (200 feet).SOR 694

Dismantling Brick Work or stone work in lime or cement mortar and including stacking of materials as Directed by the Engineer-in-charge with in a distance of 60 meter(200feet)

Disposal of Excavated Soil up to 5.00 KM distance complete with labour T&P ETC at site. .(SOR UP PWD SI - 131(A) 100% Disposal of Excavated Material (Average Diatance from all Sides of City) 80 % Of Excavated Material

Concrete with 4 cm. gauge brick ballast, Fine sand of 1.25 F.M. and cement, in proportion of 12:6:1 in foundations and under floors, including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. (SOR UP PWD SI - 273) Side Ramp

R.C.C. Work with cement, approved coarse sand & 2 cm guage approved stone grit in proportions of 1:1.5:3 in lintels of door & windows excluding supply of reinforcement and its bending. But including its fixing and binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, tools & plants etc. required for proper completion of the work including cost of binding wire. The rate excludes making of drip course which shall be paid extra. (SOR UP PWD SI - 284a) Jatav nagar me uncha mahi tala puliya

M.S. (tor steel or plain) in Plain work such as R.C.C. or R.B. work including bending for proper shape as necessary inclding bending for proper complition of the work and including supply of all steel & wastage, bend, hooks and authorised overlapping hall be measured.(As per analysis) in Pulia |

M-150Brick work in one cement & Four course sand mortar in foundation and plinth including supply of all materials labour, Tools & plants etc. required for proper completion of the work. (SOR UP PWD SI - 305a) Under Puliya Jatav nagar me uncha mahi tala puliya Jatav nagar me adarsh nagar puliya

12 mm thick plaster with cement and ccorse sand of 1:25 fineness modules in 1:4 over brick work minimum thickness not to be less than 1cm.including supply of all materals labour t&p etc. (SOR UP PWD SI - 584a)

Plain Cement Concrete with 2c.m.gauge approved slone balliast, coarse sand & cement in the proportion of 4:2:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. (SOR UP PWD - 279 A) Side Ramps | 15 Nali Bed | 1.

Supply of 80mm thick Precast cement concerete ZIG ZAG Interlocking paver blocks ISI mark confirming to IS: 15658-2006 with top layer of minimum 5 mm thickness having plan dimension 200x(160+120mm) of O.P. Cement , smooth high gloss finish, skid resistant; manufactured from rubber moulds through vibro-compression mechanism. The compressive strength of concrete paver block shall not be less than 40Mpa and weight 4.5kg per including cost of material, with a blanket layer of 4.00cm. thick fine sand. including labour, T & P etc required for proper completion of the work as directed by Engineer-in-charge. (SOR UP NEW 786 Item No-14)