INTERNAL AND EXTERNAL ELECTRICAL ARRANGEMENTS TO GH PALLADAM

Amount

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (5 points / Coil) Higher End )

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (6 points / Coil) Higher End

Wiring with 3 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A two way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC pipe Stair case Light point Higher End

Supply and fixing of 1 x 18W / 22W 4 Feet LED Fitting (SBT) with 20w Crystal glass LED tube (double side connection) on wall or ceiling with PVC unsheathed copper leads from terminals to the fitting (Higher End)

Supply and fixing of 1 x 18W / 22W 4 Feet LED Fitting (SBT) with 20w Crystal glass LED tube (double side connection) complete with conduit pipe suspension from the ceiling with PVC unsheathed Copper leads from the terminals to the fitting. (Higher end)

Supply and fixing of 9W LED Lamp for BH point.

Supply and fixing of WT bulk head fitting with guard suitable for 15 W LED Bulb

Supply and fixing of 24W LED 2x2 square type Recessed fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting.

Supply and fixing of 18W LED square type Recessed fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting.

Supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting

Supply and fixing of 1200mm (48") sweep BLDC ceiling fan High Speed complete ( Higher end) with 2 module 100W fan step regulator (Higher end) with 300mm down rod on the existing fan clamp

Supply and fixing of 300mm (12") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall

Supply and fixing of louvers shutters arrangements for 300mm (12") sweep (light duty) AC exhaust fan

Supply and Fixing of 16A Two-way switch in suitable Modular type GI box on wall with suitable front cover plate with connection (Higher End) (For Lift well lighting Control)

Supply and fixing of 1 no.6A two module 5 pin socket , 1 no. 6A one module switch on suitable module surface mounting Box (GI ) with module cover plate (plastic) on wall with connections. Higher End

Supply and fixing of 3nos.6A two module 5 pin socket , 3 nos. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End

Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End

Supply and fixing of 20A Flush type Wall Socket 32A DP MCB complete set for AC Plug in flush with wall with earth connection (For AC Plug)

Supply and fixing of 3nos.6A two module socket , 1 no. 6/16A two module socket , 3 nos. 6A one module switch, 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End

Supply and fixing of 63A FP MCB in suitable sheet steel enclosure in flush with wall and making good of the concealed portion and with earth connection only. (Higher end)

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 6 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End (For LDB )

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 6 nos. 10A SP MCB, as outgoing in flush with wall with earth connection only. Higher End (For Lift)

Supply and fixing of 7 segment 4 way TPN MCB sheet steel distribution board (Higher end) with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 8 ways in one segment) (3x 4 ways in each segment) and seperate provision for MCB / Isolators ( totally 12 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following in flush with wall with earth connection only. i. 63A 4P MCB - 1 no. ii. 63A 4P 30MA RCCB/ELCB - 1 no. iii. 63A DP MCB Isolator -3 nos. iv. 6A to 32A SP MCB - 12 nos.

Supply and fixing of Vertical type 4way triple pole neutral MCCB DB SS enclosure double door type with 100A 4pole MCCB as incoming and 4No. 63A TP MCB's as outgoing in flush with wall and making good of the concealed portion with earth connection. The MCCBDB and MCB's should be with the ISI mark. (Higher end)

Supply and fixing of 63A FP MCB with 63A 30mA FP ELCB in 8 mod weather proof enclosure in flush with wall and making good of the concealed portion with earth connection (Higher end).

Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire and making good of the concealed portion

Supply and Run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 4 sq.mm. PVC insulated SC unsheathed FRLS copper wire and making good of the concealed portion. (For Power plugs and 8way SPN MCB DB)

Supply and Run of 2 of 6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 6 sq.mm. PVC insulated SC unsheathed FRLS copper wire and making good of the concealed portion (For CDB)

Supply and Run of 4 of 16 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 16 sq.mm. PVC insulated SC unsheathed FRLS copper wire with painting of suitable colour. (For 4way VTPN DB)

Supply and Run of 3 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable gauge MS conduit pipe on wall and ceiling with continuous earth wire connection of 2.5 sq mm copper wire with painting of suitable colour. (For Lift)

Supply and run of 4 of 25 sq. mm PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 6 sq.mm copper wire and making good of the concealed portion

Supply and fixing of 63A TPN switch disconnector fuse units in sheet steel enclosure with HRC fuses double break on suitable angle iron frame work with MS cable entry boxes with earth connection only.

Supply and fixing of 100A TPN switch disconnector fuse units in sheet steel enclosure with HRC fuses double break on suitable angle iron frame work with MS cable entry boxes with earth connection only.

Supply and fixing of 400A capacity dust and vermin proof cubic panel board of suitable size (6ft x 6ft x 1.5 ft) CRCA sheet for outer body and stiffness and doors, switches supports respectively and with supply and fixing of the following interior mounting switches with centre busbar chamber and vertical covers on both side of the busbar chamber at the extreme ends side and confirming to I.S Specification. All the main switches should be L&T / Siemens make only.

The bus should be mounted on synthetic enamel compound bus supports at equal interval as per IS specifications. The incoming 400A switch should be connected to the bus with same size of 2" x 1/4" & 250A switch should be connected with 30mmx6mm Cu. Flat and 125A switch with 30mm x 3mm cu flat. 63A switches should be connected with No.8 SWG Cu. The switch should be separated from the bus by 6mm thick hylum sheet separators, and properly earthed by tinned solid copper flat as per I.E rules CEIG specifications. The panel should be painted with two coats of high quality enamel paint over one coat of red oxide primer, the cable size, capacity of switch, location etc., should be marked with white paint and 2 Nos, metallic danger board affixed complete with mounting on base channel supports.

Supply and erection dust & Vermin proof wall mounting type energy meter cubical made up of 165WG CRCA sheet steel with bus chamber, metering chamber & fuse chamber with necessary stiffness with suitable metering. The bus chamber should be fixed with 50X6 mm (2X1/4") tinned copper flats for 3 phase & neutral on suitable epoxy mounts for termination of incoming cable and for outgoing flexible copper leads to meter.

the meter chamber should be provided with 6mm thick hylum sheet for fixing meter. The fuse chamber should be provided with CT for 3 phase voltmeter, Ammeter and 3 Nos. 500A porcelain fuse units expended with bus bar & 25 X 6mm Cu. neutral bus for terminating outgoing cables. All the doors should be provided with lockable & Sealing arrangements and 2 Nos. 25 X 3 mm copper flats should be provided at the rear for earthing.All the door should be earthed with suitable flexible leads.The cubical should are powder coated with grey colour and supported on suitable MS angle base frame work.

Supply, Erection, Testing & Commissioning of 250A capacity Dust & Vermin proof cubicle panel made out of 16SWG CRCA sheet steel enclosure with supply & fixing of the following interior mounting fuse switches with HRC fuses with a central bus bars chamber & two numbers of Horizontal cable chamber at top and bottom. 250A FP SDF Double Break switch withHRC fuse units - 1no as incoming. Outgoings: 125A TP SDF Double Break switch with HRC Fuse units - 2Nos. 63A TP SDF Double Break switch with HRC Fuse units - 6 Nos.

AC ARRANGEMENT: Supply erection testing commissioning of 2.0 TR (6000 KCal / Hr) ABS Plastic split type Air Conditioner conforming to IS 1391 [Part-2] 1992 with Rotary compressor and Copper coil operating on Non CFC refrigerant suitable for wall mounting for operating on 230V 50HZ single phase AC supply with Three Star rating Model as per BEE Specification and capable of performing the following functions.

A) Cooling B) Dehumidifying C) Air circulating D) Filtering the installation work for the above split type AC units includes the following. 1.Mounting/ fitting indoor and outdoor units at their respective locations. 2.Laying refrigerant pipe line of 6mtrs distance and connecting the both units after drilling hole in the wall if required thickness of the copper tubing shall not be less than 0.80mm 3.Insulating the suction pipe with expanded polythene foam 5mm thick tubing.

4.Laying 15mm dia flexible PVC drain pipe of 6mtrs length to throw out the condensate water being formed in the indoor unit. 5.Leak testing the entire gas unit. 6.Charging refrigerant gas in the unit. 7.Suitable electric wiring to be provided with 2.5sq.mm PVC insulated copper wire between indoor and outdoor units up to 4mtrs length and up to switch within 3mtrs of location of indoor unit.

Supply and fixing of 5KVA Automatic voltage stabilizer of wall mounting type with Automatic time delay switching arrangements suitable to operate on 230V Single phase supply.

Supply and fixing of MS stand for fixing outdoor unit

Supply and laying of 5/8” and 3/8” copper refrigerant pipe (Extra beyond 3 metres supplied with AC unit)

Supply and fixing of water drain pipe line (1” PVC Pipe)

Supply and clamping of 3 ½ x 25 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps

Supply and fixing of brass cable gland for 3 ½ x 25 sq.mm. PVC armoured LTUG cable with earth connection

Supply and providing cable end termination of 3 ½ x 25 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Supply and laying of 3 ½ x 50 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good [For Male Ward & Existing Electrical room]

Supply and clamping of 3 ½ x 50 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps

Supply and fixing of brass cable gland for 3 ½ x 50 sq.mm. PVC armoured LTUG cable with earth connection

Supply and providing cable end termination of 3 ½ x 50 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Supply and laying of 3 ½ x95sq.mm PVC armoured LTUG cable through 65mm dia GI pipe in a trench to be excavated at a depth of 0.75 meter and refilling the earth to make good for road crossing [For OP Block & Xray]

Supply and laying of 3 ½ x 95 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good

Supply and clamping of 3 ½ x 95 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps

Supply and fixing of brass cable gland for 3 ½ x 95 sq.mm. PVC armoured LTUG cable with earth connection

Supply and providing cable end termination of 3 ½ x 95 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Supply and laying of 3 ½ x185sq.mm PVC armoured LTUG cable through 65mm (21/2”) dia GI pipe in a trench to be excavated at a depth of 0.75 meter putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good by road crossing [For 250A Panel]

Supply and clamping of 3 ½ x 185 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps

Supply and fixing of brass cable gland for 3 ½ x 185 sq.mm. PVC armoured LTUG cable with earth connection

Supply and providing cable end termination of 3 ½ x 185 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Supply and laying of 3 ½ x 240 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good

Supply and clamping of 3 ½ x 240 sq. mm PVC LTUG armoured LTUG cable through 80mm (3¼”) dia G.I pipe on post or on wall with MS Clamps. (For Service Connection Main)

Supply and fixing of brass cable gland for 3 ½ x 240 sq.mm. PVC armoured LTUG cable with earth connection

Supply and providing cable end termination of 3 ½ x 240 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Supply and fixing of 400 A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with earth connection only. [For TNEB Double feeder Supply]

Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall /floor / ground for earth connection

Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection

Earthing as per the ISI specification with an earth electrode of 2.10metre Class'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mmx50mmx6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry

Supply, erection testing and commissioning of uninterrupted power supply (UPS) unit of capacity 3 KVA UPS single phase (Reputed make) with input voltage 12V DC supply output volage 230V-50Hz AC supply with following accessories / circuits and with 2 hrs of battery backup at full load respectively. 1. Battery charging device. 2. Inverter Circuit 3. Overload as well as short circuit 4. Indication for all operations like Battery Charging Over load low battery etc … 5. Reset Switch -1No 6.Tubular Battery-6 Nos of 12VDC / 150Ah (Reputed make) 7.One layer wooden /Steel fabricated stand [As per SR] [M-2107]

Design, Engineering, Supply, Fabrication, Erection, Testing, Commissioning and Handing over of 1No.26 persons 1768kg Capacity Passenger cum Bed Lift (Gearless) with Machine Room and Disable friendly and with fire rated doors as per the following specifications. 1. Location : Additional Building in Government Hospital at Palladam 2. No. of Lift : One No 3. Type of Lift : Passenger cum Bed Lift with machine room - Gearless model 4. Capacity of Lift : 26 Persons / 1768kgs 5. Speed : 1.0mtr / sec 6. Type of Drive : V3F Drive with enhanced ride comfort and near Zero Level Functions. 7. No. of Floors : 2 Floors [Ground + 1] 8. Total Travel : 10Mtrs / Pit 1500mm / Head room 5100mm

9. Leveling accuracy : High level accuracy with smooth and jerk free stopping. 10 Construction of lift shaft : RCC with brick masonry 11.Car: 18 SWG High Quality Car. S.S. Car and Hand rail, granite /marble flooring and Perspex False Ceiling. 12 Position of Machinery : Directly above the Lift well – Gearless. 13 No. of Landings : 2 in the front side only. 14 No. of Car Entrance : One in the front side. 15 Car Entrance : Power operated V3F Drive, Side opening Sliding Stainless Steel (1.5mm) Hairline finish door. 16 Landing Entrance door : Side opening Sliding Stainless Steel (1.5mm) hairline finish door with provision for Emergency Exit key at all landings. 17 Lift well : 2500mm (Wide) x 3000mm (Depth) available as per Chief Architect Drawing. Shaft to be constructed as per IS Standards for 2500mm (Wide) x 3000mm (Depth) 18 Lift Pit : 1600mm Depth. 19 Car Size : 2000 x 1100 x 1750 (mm Wide x mm Depth x mm Height as per IS 14665 (Part I) 2000 20 Car Clear Opening of Gates / Doors / Lintel : 1200mm Wide x 2000mm Height and Lintel : 2300mm as per IS 14665 (Part I) 2000 21 Power Supply : 400/415V, 3Phase, 50Hz AC. Auxiliary Supply : 230V, 50Hz, Single Phase AC.

33 Automatic Rescue Device : Provision to facilitate the landing to the nearest floor at the time of power failure. The ARD consists of suitable Battery system with charger, Inverter, under voltage protection system etc. complete with all accessories. 34 Provision for Intercom : To be provided in the Lift Car, Ground Floor Reception Area & Machine Room with Phone (Press & Speak) with clear and Audible volume of sound. 35 Lift License : Preparation of Drawings, payment of inspection charges to CEIG and insurance policy and Obtaining CEIG approval for the Lift as per Lift act should be done by the Lift contractor.

36 Floor Position : Included with LED display and floor annunciator. 37 Special Features: a. Infra red door sensor with full height screen b. Full width half height rear panel mirror c. S.S. hairline finish hand rail in car d. Stainless steel signal features e. Vandal proof SS button with SS cover f. S.S. hairline finish door frames for landing doors g. V3F door operator h. Call register signal i. Stainless steel facio plates for car operating Panel and landing fixtures j. Steel ladder in Lift machine room and in lift pit. k. On / Off switch for fan and light

l. Over-load warning indicator with audio Announcer m. Voltage stabilizer for control circuit. n. Small Vision Glass of size not less than 150mm x 500mm in both of the two centre opening doors of Lift Car as well as Landing doors. o. Differently abled persons friendly. 38 Over Speed Governor, Phase failure and Phase reversal Relay, alarm bell, T guide brackets for car and counter weight, Rubber padding under the winding unit, Motor of adequate capacity, Electromagnetic brake with compression springs, Car safety gears, Buffers, Electro mechanical locks, Emergency key, side supporting angles, Motor over load protection devices, Final limit switch main, suspension ropes, Counter weights, Lifting joist for mounting the Machineries.

39 Guarantee : Guarantee for at least one year for the materials and workmanship of equipments should be offered by the Lift contractor. 40 Site testing in accordance with IS 14665 should be carried out at the time of Handing over to the User department. 41 Supply, operation and maintenance manual and necessary tools for operation and a set of spare parts required for one year to be provided. M-2373

Rigiki Electricals and Control Systems (BID ID -1404044)