Creation of Internal Infrastructure Facilities such as Formation of Roads with RCC Side Drain, RCC Box Culvert and Providing Street lights at SIPCOT Food Park, Theni

Amount

PART-A (FORMATION OF ROAD)

Removing the top soil including earth work excavation in all classes of soils, removal of weeds and vegetation, roots etc., and depositing in the places shown by the Engineer incharge etc., complete and as per the standard specification and as per the direction of SIPCOT officers.

Supply, laying and fixing of 300mm RCC NP3 class pipe including labour charges etc., complete and as per the standard specification and as per the direction of SIPCOT officers.

Forming of embankment with carted earth with a initial lead 10 km including conveyance,laying,watering and consolidation etc., complete as per the directed of SIPCOT officers. as per MORTH specification clause No.111,112,305,900

Forming of Sub grade with carted earth minimum CBR of 9% with a initial lead 10 km including conveyance,laying,watering and consolidation etc., complete as per the directed of SIPCOT officers. as per MORTH specification clause No.111,112,305,900

Construction of Granular Sub - Base (GSB) to the required compacted thickness (Drainage layer) by providing approved Coarse graded material conforming to Grading- V of Table 400 - 1 and satisfying the physical requirement for material for GSB as per Table 400 - 2 of MORTH Rev.-5 including screening, spreading in uniform layers with motor grader on prepared surface, watering and premixing by mix in place method with rotavator at OMC, and compacting with Vibratory roller 80 to 100 KN static weight to achieve the desired density and fine dressing to required grade and cross slope as directed by the SIPCOT officers etc., complete including obtaining and transporting all materials from approved quarry site to work site with all lift and lead by mechanical transport, head load or any other mode of transporation including cost and conveyance of all materials, labour charges,hire charges and fuel charges for loader, water tanker with sprinkler,motor grader, vibratory road rollers and all other equipments, tools and plants, safety measures, testing required including all other incidental charges, etc., complete as per the standard specification as per clause 401 of MORTH Rev.-5 and as directed by the SIPCOT officers.

Providing and laying, spreading and compacting graded stone aggreates to Wet Mix Macadam Base Course of 230mm compacted thickness specification in two layers of 115mm thick each or else as specified on the prepared sub base by providing approved Coarse graded material conforming to Table 400 - 13 and satisfying the physical requirement for material for WMM as per Table 400 - 12 of MORTH Rev.-5, including pre-mixing the materials with water at OMC in mechanical mix plant carriage of mixed matrerial by tipper to site laying in uniform layers with favours in subbase/ base course on well prepared surface and compacting with vibratory roller to achieve the desired density including cost of material, labour charges, rental for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH Rev.-5 etc., complete complying with standard specification and as directed by SIPCOT officers.

Providing and laying Prime coat over wet mix macadam surface using 7.00 Kg bitumen emulsion for 10 sqm area including cost and conveyance of bitumen binder including labour charges for preparing the surface and applying the required quantity as tack coat by bitumen sprayer etc.complete as per clause 502 of MORT & H specifications. and as directed by SIPCOT Officers.

Providing and laying Tack coat over treated wet mix macadam surface using 2.50 Kg bitumen to cut back for 10 sqm area including cost and conveyance of bitumen binder including labour charges for preparing the surface and applying the required quantity as tack coat by bitumen sprayer etc.complete as per clause 503 of MORT & H specifications. and as directed by SIPCOT Officers.

Providing and laying to 75mm thickness dense bituminous macadam using 0.40 cum of 37.50 -13.20 mm IRC size graded metal 0.35 cum of 13.20 - 2.36mm IRC graded metal and 0.36 cum of 2.36mm and below IRC size HBG metal with 71.30 kg of VG30 bitumen for premixing for 10 Sq.meter including cost and conveyance of all materials to CMP site heating the bitumen and aggregates to required temperature and mixing them in required temperature in central hoti mix plant 20-30 tonnes capacity, conveying the mix by tipper trucks to paver site, spreading the mix in required temperature for uniform thickness of 75mm with mechanical paver to the specified grades and cross sections and compaction by vibratory Pneumatic Roller to the required density etc., including labour charges for loading the bitumen in bitumen tank and metal to feeder unit, labour for attending to paver site etc., including hire,fuel charges for 20-30 tonnes capacity CMP unit bitumen boiler, tipper trucks, paver finisher/9 m paver finisher, vibratary/Pneumatic Roller,and al other tools & plants required including fuel and all other incidental charges etc., complete asper specification using CMP as per clause 505 MORTH REV. V Specification and as per directed SIPCOT Officers.

Providing and laying Tack coat over Bituminous surface using 2.00 Kg bitumen emulsion to cut back for 10 sqm area including cost and conveyance of bitumen binder including labour charges for preparing the surface and applying the required quantity as tack coat by bitumen sprayer etc.complete as per clause 503 of MORT & H specifications.and as per directed SIPCOT Officers.

Providing and laying 40mm compacted thickness bituminous concrete using 0.13 cum of 19.0 - 9.5 mm graded IRC size HBG metal 0.17 cum of 9.5-2.36mm IRC graded metal and 0.26 Cum. of 2.36 mm and below size graded metal with 50.30 of bitumen grade VG 30/VG40 confirming to IS 73 for pre mixing for 10 Sq. meter and using materials as per table 500 - 17 and staifying the physical requirement for material for course aggregates for BC as per table 500 - 16 of MORTH REV-V including cost and conveyance of all materials to CMP site , heating the bitumen and aggregates to required temperature and mixing them in required temperature in central hot mix plant 20-30 tonnes capacity, conveying the mix by tipper trucks to paver site spreading the mix in required temperature for uniform thickness of 40mm with mechanical paver to the specified grades and cross sections and consolidation 80-100 kn vibratory/Pneumatic road roller to the required density etc., includinglabour charges for loading the bitumen in bitumen tank and metal to feeder unit, labour for attending to paver site etc., including hire, fuel charges for 20-30 tonnes capacity CMP unit bitumen boiler, tipper trucks, paver finaisher/9 m paver finisher /Vibratory/Pneumatice road roller , and all other tools and plants requried, including fuel and all other incidental charges etc., complete as perspecification using CMPP as per clause 507 OF MORTH REV. specification and as directed by SIPCOT Officer

Foot Path

GRAVEL FILLING -Supplying and filling with Gravel in layers of not more than 15 cm thick well rammed, watered and consolidated etc. complete complying with standard specification and as directed by SIPCOT officers.

Supplying and filling with stone dust in layers of not more than 15 cm thick well rammed watered and consolidated etc. complete complying with standard specification and as directed by SIPCOT officers.

Providing and Laying Rubber Moulded Hydraulic Pressed Paver Block of 63 mm thick approved design made out of 12mm and 6mm HBGS chips in M30 mix properly cured to attain the required strength, Laying and interlocking block and well compacted using 1-3 ton capacity compressor, the cost inclusive of all materials for manufacturing, interlocking block loading transportation to work site unloading and labour charges for fixing over Sand bed of 30mm thick & Joints filling using compressor of 1-3 ton capacity including hire and fuel charges for compressor and all other incidental charges etc complete complying with standard specification and as directed by SIPCOT Officers.

Providing and laying of Plain Cement Concrete 1:2:4 (One Cement, Two M.sand and Four hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all items of works excluding cost of reinforcement grill and fabricating charges, centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing and providing holes in the PCC kerb wall for fixing wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three M-sand) and kraft paper laid over it without claiming etc., complete complying with standard specification and as directed by SIPCOT officers.

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc., Complete complying with standard specification and as directed by SIPCOT Officers. Plan surface below plinth

Supply, delivery and laying of 110mm dia pvc pipe for providing holes in drain including cost and conveyance of pipes and labour charges for laying and making the surface in good etc., Complete complying with standard specification and as directed by SIPCOT officers. complete at 20 m intervals .

Painting two coats of black and white bands alternatively each coat separately using black and white synthetic enamel paints of approved quality including cost and conveyance of paint, painting articles and utencils, labour charges etc., complete complying with standard specifications and as directed by SIPCOT Officers.

Supply and fixing of Precast RCC 1:2:4 jally including cost of centring, steel fabrication RCC 1:2:4 by using designed mould as directed by the SIPCOT Officers, curing, fixing in the side wall of drain to the true alignment, cost and conveyance of all labour charges and materials etc., complete complying with standard specifications and as directed by SIPCOT Officers.

Painting two coats of newly plastered wall surface with ready mixed plastic exterior emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed by "SIPCOT" Officers

CONSTRUCTION OF RCC SIDE DRAIN

Earth work excavation for foundation in all classes of soils and sub-soils and to full depth as may be directed except in hard rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification and as directed by SIPCOT officers.

Supplying and filling with stone dust in layers of not more than 15 cm thick well rammed watered and consolidated etc., complete complying with standard specification and as directed by SIPCOT officers.

Providing and laying of Plain Cement Concrete 1:4:8 (One cement, Four M.sand and eight aggregate) using 40mm size Hard broken granite stone jelly for foundation, flooring bed, dummy columns, mudmat below column footings, Grade beams etc. laid in layers not exceeding 15cm thick including cost and conveyance of all materials and labour to work site, mixing of concrete, laying, compacting, curing with all leads for soft potable water, hire and fuel charges for all tools and plants including all other incidental charges such as bailing out water for forming protective bunds, coffer dams and shoring, strutting etc. complete complying with standard specifications and as directed by "SIPCOT" officers.

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc., Complete complying with standard specification and as directed by SIPCOT Officers. for plane surface.

Providing Reinforced Cement Concrete 1: 1 1/2 : 3 (One cement, One and a half M-sand and three jelly) for using Machine crushed 20mm size Hard Broken granite ISS stone Jelly for all "REINFORCED CEMENT CONCRETE WORKS" including cost and conveyance of all materials and labour to work site excluding cost of centering, shuttering, strutting and cost of MS / RTS Reinforcement grills placed in position but including machine mixing of concrete, laying, vibrating with mechanical vibrators, finishing, curing, including cost of soft potable water treatment of bearing, smooth with cement mortar 1:3 (One cement and Three m-sand) and kraft paper laid over it without claim for extra and and all labour charges for mixing concrete, laying, curing, vibrating charges, hire charges for all tools and plants and all other incidental charges etc., complete complying with standard specifications and as directed by SIPCOT officers.

Supplying, Fabricating and placing in position steel reinforcement grills using M.S. / R.T.S. rods of all sizes of reinforcement for all Reinforced cement concrete works (for pedestal pillar concrete) including cost and conveyance of steel, binding wire,spacer bars, cover blocks, labour charges for unbending of rods, straighteing, cutting, fabricating, tying, lifting, placing in position, overlaping to the required length whereever necessary cover blocks and all other incidental charges etc. complete complying with standard specifications and as directed by SIPCOT officers.

Supply, delivery and laying of 90mm dia pvc pipe for providing weep holes in drain including cost and conveyance of pipes and labour charges for laying and making the surface in good etc complete at 3 m intervals complete complying with standard specification.and as directed by SIPCOT officers.

CONSTRUCTION OF RCC BOX CULVERT

Earth work excavation for foundation in all classes of soils and sub-soils and to full depth as may be directed except in hard rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification and as directed by SIPCOT officers.

Supplying and filling with stone dust in layers of not more than 15 cm thick well rammed watered and consolidated etc. complete complying with standard specification and as directed by SIPCOT officers.

Providing and laying of Plain Cement Concrete 1:4:8 (One cement, Four M.sand and eight aggregate) using 40mm size Hard broken granite stone jelly for foundation, flooring bed, dummy columns, mudmat below column footings, Grade beams etc. laid in layers not exceeding 15cm thick including cost and conveyance of all materials and labour to work site, mixing of concrete, laying, compacting, curing with all leads for soft potable water, hire and fuel charges for all tools and plants including all other incidental charges such as bailing out water for forming protective bunds, coffer dams and shoring, strutting etc. complete complying with standard specifications and as directed by "SIPCOT" officers.

Providing and laying in position, Standardised Concrete Mix M-30 Grade in accordance with IS:456-2000, using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 400 kg/mᶾ and maximum water cement ratio of 0.45, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m.) 7670 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards etc., complete complying with standard specifications and as directed by SIPCOT Officers. For foundation and basement

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc., Complete complying with standard specification and as directed by SIPCOT Officers.

vertical surface belowplinth beam

plane surface below plinth beam

Supplying, Fabricating and placing in position steel reinforcement grills using M.S. / R.T.S. rods of all sizes of reinforcement for all Reinforced cement concrete works (for pedestal pillar concrete) including cost and conveyance of steel, binding wire,spacer bars, cover blocks, labour charges for unbending of rods, straighteing, cutting, fabricating, tying, lifting, placing in position, overlaping to the required length whereever necessary cover blocks and all other incidental charges etc. complete complying with standard specifications and as directed by SIPCOT officers.s

Supply and fixing of PVC pipe 90 mm dia ( 4 kg. per cm2 )including cost of materials and labour charges for fixing etc., Complete complying with standard specification and as directed by SIPCOT officers.

Painting two coats of black and white bands alternatively each coat separately using black and white synthetic enamel paints of approved quality including cost and conveyance of paint, painting articles and utencils, labour charges etc., complete complying with standard specifications and as directed by SIPCOT Officers.

PART-B (Providing Street Light and High Mast Lighting Works)

Supply, installation, testing and commissioning of 140 W LED street lights. Housing made of die cast aluminium with silver/grey powder coated, diffuser should be clear heat resistance toughened glass and IK08 with IP66 protection, system efficiency should be >120 LM/W, system having 5KVA surge, operating voltage range of 120V - 270 V AC and frequency 50 HZ, power factor, 0.95,THD < 10%, LED chip should be high power and each LED should be > 2Watts, each LED with induvidual lens, LED life 50000 burning hours as per L70, CCT Range 5000K-6000K, CRI>70 and make of LED CREE/ OSRAM/NICHIA, LM 79 tested and driver should be potted type Constant current LED driver with 4KV Inbuilt Surge, Driver Efficiency >85%, driver having high voltage, short circuit protection and driver should be with BIS certified with R number. The fixture shall be conforming to latest indian standards or international standards. LEDs comply to the photo biological safety standards as per IEC62471 and RoHS. complete and as directed by the SIPCOT officers

Supply and fixing of 300 W LED Flood light fitting with innovative thermal management with multiple optics and equipped with IP 66 protection with 5 years warranty.complete and as directed by the SIPCOT officers

Supply of 12.50 meter high mast for wind velocity 160kmph, having individual length of 6.5meters, 3mm thick bottom and top section, bottom diameter 300mm and top 150mm, having galvanizing thickness of average 70 micron for bottom and top sections, with aaccessories like motor, double drum winch of gear ration 50:1 trailing cable 5 core 2.5sq.mm, 6mm SS wire rope, head frame, lantern ring, lighting finial suitable for 6Nos 300W Flood light but without Flood light rate. complete and as directed by the SIPCOT officers

Erection of 12.5 m high mast with help of crane and hydra , wiring of light fittings PVC sheathed wiring and other charges complete and as directed by the SIPCOT officers

supply of TWIN dome LED dome avaiation fitting.complete and as directed by the SIPCOT officers

Supply, delivery and erection of 10 metre height Hot Dip Galvanized Octogonal Poles with 150 mm bottom A/F & 70 mm top A/F made up of 3 mm thick HT sheet along with base plate of size 240 x 240 x 16 mm along with 1000 mm long Double/Single arm braket made up of 40 NB GI Pipe, Backeite sheet connectors for fixing of street light fittings including 4 Numbers of M20 mm dia. MS " J "bolts of size 750 mm long top - EN8 grade foundation bolts along with Template for the above poles & Terminals suitable for the same etc., complete and as directed by the SIPCOT officers

Fabrication, supply and installation of outdoor distribution pillar box of size 1250mm x 900mm made out of 16SWG MS sheet with lockable door with 1no. 100 A TPN rewireable fuse switch and 32A 4 WAY FUSE DB with 12 No.s 63A porcelian fuse cut outs with 1 No copper earth link and neutral link and 1 no. of 63A TP contractor with 230 V coil and 1no. of 24 hours timer of L&T make or equivalent with its control wiring, power interconnection with 7/6 copper wire from main switch to contractor and contractor to fuse DB etc. The pillar to be installed in angle iron frame pedestal with concrete grouting etc, including cost and conveyance of all materials and labour including pedestal concrete and angle iron frame pedestal etc complete and as directed by SIPCOT officials

Supply and laying of 3 1/2 x 50 sq.mm PVC armoured LTUG cable with ISI mark in a trench to be excavated at a depth of 1m, putting 0. m layer of quarry dust and civeringthree sides of the cable with bricks completely and refilling the earth to make good and as per standard specifications. The price shall be inclusive of all end termination , aluminium conductor, jointing materials, charges for transportation, stretching and laying of the cable earthwork excavation , cost and conveyance and providing quarry dust, brick refilling of earth to make good etc. complete. Necessary cable brackets shall also be taken into account for the cables to be brought into the feeder pillar and lighting cubicle as per the ISI 1554 (Pt.i) etc. complete and as directed by the SIPCOT officers

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required etc. complete and as directed by the SIPCOT officers 3 1/2 x 50 sqmm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the RCC/ HUME/ METAL pipe as required. completed as per statndard specification and as directed by SIPCOT officer. Upto 35 sqmm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.completed as per statndard specification and as directed by SIPCOT officer. 3 1/2 x 50 sqmm

Supply of following Web application charges per luminaire & on cloud hosting (annual subscription) completed as per statndard specification and as directed by SIPCOT officer.

Coil Earth to street light poles with 8 SWG G .I wire of 11.5 mtr, of length in which 10 mtrs of total length compressed in to coil of 1 mtr length connected suitable with hexagonal earth bolt of size 8 mm x 25 mm welded on the pole at one end with coil position fixed on the earth etc . completed as per standard specification and as directed by SIPCOT officer.

Supply and insallation maintenance free GI Earthing System comprising of 50mm dia and 2 mtr. long earth electrode of low carbon steel rod with 100 micron bonding and 25 kgs. of carbon based environment friendly backfill compound and suitable clamp completed as per statndard specification and as directed by SIPCOT officer.

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) completed as per statndard specification and as directed by SIPCOT officer.

Supply, delivery and laying of 90mm dia HDPE Pipes including cost and laying charges into trenches etc., completed as per statndard specification and as directed by SIPCOT officer.

CONSTRUCTION OFCIVIL FOUNDATION WORK FOR 10M LIGHT POLES

Earth work excavation for foundation in all classes of soils and sub-soils and to full depth as may be directed except in hard rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification and as directed by SIPCOT officers.

Supplying and filling with stone dust in layers of not more than 15 cm thick well rammed watered and consolidated etc., complete complying with standard specification and as directed by SIPCOT officers.

Cement Concrete 1:2:4 (One Cement, Two sand and Four broken stone jelly) using 20mm size hard broken stone jelly for r.c.c columns, excluding cost of centering shuttering reinforcement grills and fabrication charges but including curing etc. complete. and providing fixture like clamps in the RCC floor/roof slabs wherever necessary and bearing surfaces of wall beams etc shall be finished smooth with cement mortar 1:3 and kraft paper laid over it without claiming extra etc complete complying with standard specification and as direected by SIPCOT officer.

Providing Reinforced Cement Concrete 1: 1 1/2 : 3 (One cement, One and a half M-sand and three jelly) for pedestal concrete using Machine crushed 20mm size Hard Broken granite ISS stone Jelly for all "REINFORCED CEMENT CONCRETE WORKS" including cost and conveyance of all materials and labour to work site excluding cost of centering, shuttering, strutting and cost of MS / RTS Reinforcement grills placed in position but including machine mixing of concrete, laying, vibrating with mechanical vibrators, finishing, curing, including cost of soft potable water treatment of bearing, smooth with cement mortar 1:3 (One cement and Three M-sand) and kraft paper laid over it without claim for extra and all labour charges for mixing concrete, laying, curing, vibrating charges, hire charges for all tools and plants and all other incidental charges etc., complete complying with standard specifications and as directed by SIPCOT officers.

Supplying, Fabricating and placing in position steel reinforcement grills using M.S. / R.T.S. rods of all sizes of reinforcement for all Reinforced cement concrete works (for pedestal pillar concrete) including cost and conveyance of steel, binding wire, spacer bars, cover blocks, labour charges for unbending of rods, straightening, cutting, fabricating, tying, lifting, placing in position, overlaping to the required length whereever necessary cover blocks and all other incidental charges etc. complete complying with standard specifications and as directed by SIPCOT officers. (The steel rods must be Fe 415 grade of any brand with ISI marking and necessary test certificate to be produced before using it at site)

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for vertical surfaces with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at about 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc., Complete complying with standard specification and as directed by SIPCOT Officers. Rectangular and square column

Supply, delivery and laying of 90mm dia HDPE Pipes including cost and laying charges into trenches etc., complete complying with standard specifications and as directed by SIPCOT Officers..

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete complying with the standard specificaiton and as directed by the SIPCOT officers..

CONSTRUCTION OFCIVIL FOUNDATION WORK FOR 12.5M HIGH MAST LIGHT POLES

Earth work excavation for foundation in all classes of soils and sub-soils and to full depth as may be directed except in hard rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification and as directed by SIPCOT officers.

Supplying and filling with stone dust in layers of not more than 15 cm thick well rammed watered and consolidated etc., complete complying with standard specification and as directed by SIPCOT officers.

Cement Concrete 1:2:4 (One Cement, Two sand and Four broken stone jelly) using 20mm size hard broken stone jelly for r.c.c columns, excluding cost of centering shuttering reinforcement grills and fabrication charges but including curing etc. complete. and providing fixture like clamps in the RCC floor/roof slabs wherever necessary and bearing surfaces of wall beams etc shall be finished smooth with cement mortar 1:3 and kraft paper laid over it without claiming extra etc complete complying with standard specification and as direected by SIPCOT officer.

Providing Reinforced Cement Concrete 1: 1 1/2 : 3 (One cement, One and a half M-sand and three jelly) for pedestal concrete using Machine crushed 20mm size Hard Broken granite ISS stone Jelly for all "REINFORCED CEMENT CONCRETE WORKS" including cost and conveyance of all materials and labour to work site excluding cost of centering, shuttering, strutting and cost of MS / RTS Reinforcement grills placed in position but including machine mixing of concrete, laying, vibrating with mechanical vibrators, finishing, curing, including cost of soft potable water treatment of bearing, smooth with cement mortar 1:3 (One cement and Three M-sand) and kraft paper laid over it without claim for extra and all labour charges for mixing concrete, laying, curing, vibrating charges, hire charges for all tools and plants and all other incidental charges etc., complete complying with standard specifications and as directed by SIPCOT officers.

Supplying, Fabricating and placing in position steel reinforcement grills using M.S. / R.T.S. rods of all sizes of reinforcement for all Reinforced cement concrete works (for pedestal pillar concrete) including cost and conveyance of steel, binding wire, spacer bars, cover blocks, labour charges for unbending of rods, straightening, cutting, fabricating, tying, lifting, placing in position, overlaping to the required length whereever necessary cover blocks and all other incidental charges etc. complete complying with standard specifications and as directed by SIPCOT officers. (The steel rods must be Fe 415 grade of any brand with ISI marking and necessary test certificate to be produced before using it at site)

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for vertical surfaces with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at about 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc., Complete complying with standard specification and as directed by SIPCOT Officers.

Plane surface below plinth beam

Rectangular and square column

Supply, delivery and laying of 90mm dia HDPE Pipes including cost and laying charges into trenches etc., complete complying with standard specifications and as directed by SIPCOT Officers.

Supply of foundation bolt of M24 size having length 750mm 6Nos bolt per mast, made of TOR steel having galvanized on the threaded portion top portion of the bolt, as per technical data sheet. complete complying with standard specification and as directed by SIPCOT Officers

PROVIDING CCTV WORKS

Supply, Installation, Testing & Commissioning of HD IP Dome camera with1/2.9-inch CMOS,Sensor pixels (3000-3900) x (1700x-2200), Sensitivity -0.24 lx ( color ) 0.05 (mono), IR Range 30 mtr dynamic range 100 bd, True day/ night , automatic electronic shutter , Video compression H.265 , MP : M-JPEG, white balance , BLC, quad- streaming , video analysis ( object removal , Liotering , enter or exit from the field , object clasification etc. ) privacy mask , anolge video output , auto varifosal lens (zoom/focus) 3mm to 10mm lence 60s pre alarm recording true day / night , Two way , full duplex audio , audio compression AAC , G711, L16 Memory card slot (suport upto 1TB), 3-Axis adjustmen (pan/tilt/ rotaion), ONVIF profile S, CE, UL, FCC, certified . IP66 and 10k. as directed by SIPCOT Officers .

Supply, Installation, Testing & Commissioning of HD Outdoor IR IP Bulet camera with1/2.9-inch CMOS,Sensor pixels (3000-3900) x (1700x-2200), Sensitivity -0.24 lx ( color ) 0.05 (mono), IR Range 50 mtr dynamic range 100 bd, True day/ night , automatic electronic shutter , Video compression H.265 , MP : M-JPEG, white balance , BLC, H.265 quad- streaming , video analysis ( object removal , Liotering , enter or exit from the field , object clasification etc. ) privacy mask , anolge video output , auto varifosal lens (zoom/focus) 2.5mm to 12 mm Two way , full duplex audio , audio compression AAC , G711, L16 (Live and recording ), 60s pre alarm recording Memory card slot (suport upto 256GB), 3-Axis adjustmen (pan/tilt/ rotaion), ONVIF profile S, CE, UL, FCC, certified . IP66 and 10k. as directed by SIPCOT Officers .

Supply, Installation, Testing & Commissioning of Outdoor IR 1080 P60FPS HD PTZ Camera with 1/2.8" progressive scan exmor CMOS , ellective pixels 1920 x1800 approx. 2.1M Pipxels, 30x optical zoom (7.3-4.5)mm --(129-135) mm, 16 X Digital zoom , minimum ellumination-sence up on -color: 0.05 lux, B/W: 0.01 lux, with infraed (IR) 0 LUX, Quad streaming WDR 90db, video analysis ( object removal, loitering , Enter or exite from the fild , similarty serach etc. ) Intelligent dynamic noise reduction , BLC White balance, mechanical switchable IR filter, Pan range 360 Degree continous. Tir range 0-90 Degree , pan/Tilt modes -pan : 0.1degree/s-240degree/s Tilt: 0.1degree/s -120degree/s present 256, toures, IR distnace 180mtr, IR can be internal or external with full 360deg. Pan coverage audio-1/1 channel in/out, pre-alarm recording in RAM , Memory card slot.(support upto 1TB), 24 induvidually configurable privacy masks , simple single cable instalation with POE+ suppoet for indoor/ outdoor application, Defog, IP66, ON VIF Profiles S & G, CE, UL certifirld . as directed by SIPCOT Officers .

Supply, Installation & Commissioning of 32CH NVR , ANR technology to enhance storage reliability when the network is disconnected, HDD hot swap with RAID0, RAID 1, RAID 5, RAID 6 and RAID 10 storage scheme configurable, H.265/ H.264+/ H.264/ MPEG4 video formats, support up to 12 MP resolution, HD outputs Total 2 nos, HDMI 4k resolution 1no, 16SATA (loaded with 54TB) and 1 e SATA interface, 2 self adaptive 10M/100M/1000M network interface, centralised management software, VCA detection alarm supported, support HDD quota and group modes, LAN1/LAN2 interface, (ELECTRICAL SOR 2020-2021 , SD NO34 PART P) as directed by SIPCOT Officers .

Supply, Installation & Commissioning of 8TB HDD surveillance HDD. as directed by SIPCOT Officers .

Supply, Installation & Commissioning of PC INTEL i7–10700 3.7 Ghz 8 Core /1x8GB DDR4 3200 nECC / 1TB 7200 SATA/DVD-RW/ Win 10 Pro64 OS/3 Yrs Onsite /KB + Mouse as directed by SIPCOT Officers .

Supply, Installation & Commissioning of 42" Monitor complete as required as directed by SIPCOT Officers .

Supply, Installation, Testing & Commissioning of 6 ports full loaded LIU Box with all the required pigtails complete in all respect up to entire satisfaction Engineer in charge of works. as directed by SIPCOT Officers .

Supply, Installation, Testing & Commissioning of OFC Patch Cord. as directed by SIPCOT Officers .

Supply, Installation, Testing & Commissioning of 24 Port Patch Panel. as directed by SIPCOT Officers .

Supply, Installation, Testing & Commissioning of 24 Port PoE Switches for CCTV IP camera . as directed by SIPCOT Officers .

Supply, Installation, Testing & Commissioning of 6U rack indoor/outdoor for switch Mounting with Fan and power Strip, PDU, Hardware Mounting Kit as directed by SIPCOT Officers .

Supply, Installation, Testing & Commissioning of 42U rack for switch Mounting with Fan and power Strip, PDU, Hardware Mounting Kit as directed by SIPCOT Officers .

Supply,Installation,Testing & Commissioning of 3 Core Power ARMOURED Cable 1.5 sqmm .etc complete as required as directed by SIPCOT Officers .

Supply, Installation, Testing & Commissioning of Single mode 6 Core Indoor OFC cable. as directed by SIPCOT Officers .

Supply, Installation, Testing & Commissioning of Single mode 6 Core Outdoor OFC cable. as directed by SIPCOT Officers .

Supply, Installation, Testing & Commissioning of CAT 6 STP Cable complete in all respect up to entire satisfaction Engineer in charge of works. as directed by SIPCOT Officers .

Supply, Installation, Testing and Commissioning of 6 KVA (1Ph input ‐ 1Ph output) True On Line Double Conversion UPS System consisting of: 100% capacity rectifier charger. 100% capacity inverter . With SMF batteries to provide 60 minutes backup on 5 KVA load (12V,16 no’s, 42 AH) for each UPS . withMS Open Battery Rack for Batteries & Interconnecting DC cables. as directed by SIPCOT Officers .

Supply, Installation, Testing and Commissioning of 10/100/1000 Media Converter Complete as required (ELECTRICAL TWAD2020-2021 , SD NO 36 PART P) as directed by SIPCOT Officers .

Supply,Installation ,Testing and Commissioning of junction boxes outer dimensions 620x330x240 to House MCB, PoE, adapters etc Junction Box Complete as required as directed by SIPCOT Officers .

Supply and fixing of 65mm (2-1/2") GI pipe (Class 'B') of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonary pedestal with complete with necessary clamps with painting of suitable colour etc. complete as required.as directed by SIPCOT Officers .

Supply, delivery and laying of 50 mm dia HDPE Pipes including cost and laying charges into trenches etc., completed as per statndard specification for laying optical Fiber Cable. as directed by SIPCOT Officers .

Sub Total of Total Amount in Column BA (ie. Qty x Unit Rate)

Added GST of 18%

SAI HRIDHAM INFRAA PVT LTD