SUPPLY AND INSTALLATION OF FUME HOODS, ISLAND BENCHES, WALL BENCHES, CHEMICAL STORAGE CABINETS, SOLVENT CABINETS, GAS STORAGE CABINETS ETC

Main Items :

Wall Bench (WB - 1) Size: L 4800 mm x W 750 mm x H 900 mm

ISLAND Bench (IB - 1) Size: L 4550 mm x W 1500 mm x H 900 mm

Low Constant Volume (LCV) type Bench Fume Hood (Size: L 1500 x D 915 x H 2300 mm) (For AC Lab)

Exhaust Fan (PP35) - 1 fan for 4 Nos. 1500 mm wide Fume Hood

Slotted angle rack Size: L 750 x D 450 x H 1830mm

Ventilated Chemical Storage Cabinet Size: L 1000 x D 450 x H 1830mm

Spot Extractors

Exhaust Fan (PP-25) - 1 fan for 4 No. Spot Extractor & 1 Ventilated Chemical Storage Cabinets

Peg Board with 38 Nos. PP Pegs, Drain Tray & Pipe (Size: L 900 x D 600)

Worktop mounted, double outlet eye wash with SS breaded flexible hose

Emergency Safety Shower

FOR NITROGEN and ARGON

FOR ZERO AIR

SUPPLY OF Online micron filter 1/4'' OD (SS-304)

Flash back arrester SS 304 Body SS 304 /Body brass with Necessary Connector 1/4 '' OD BOTH SIZE (Make -GC Druva or eq.) - (SS-304)

SUPPLY OF Dual stage cylinder manifold moc SS 304 with MS powder coated mounting bracket working pressure 200kg/cm2 with cylinder isolation valve as per fume hood services -(SS-304)

SUPPLY OF Two stage Cylinder Regulator with fully S.S. body with S.S.316 Diaphragm for Gas Inlet Pressure gauge: 0-280 kg/cm2 Outlet Pressure gauge: 0-14 kg/cm2 Outlet Connection : 1/8" & 1/4" ferrule fitting Inlet Connection : 5/8" BSP Male (RHT/LHT) - (SS-316)

SUPPLY OF "S.S Braided Pigtails of 1mt Length for each cylinder with safety Ropes - (SS-304)

SUPPLY OF MS powder coated Cylinder mounting bracket with chain for holding the 1 cylinder - MS

1/2" SS 304 TUBING with 0.9 - 1.2 mm wall thickness and colour coded sleeving.(Make- Sumotomo or eq. ) - (SS-304)

1/4" SS 304 TUBING with 0.9 1.2 mm wall thickness and color coded sleeving (Make- Sumotomo or eq.)

PP clamp with profile 1/2" & 1/4" od

Source connector for vacuum & water As per actuals - (SS-304)

63 mm OD HDPE pipe Providing and fixing of UV stabilized & antimicrobial fusion welded multi- layer, HDPE PE 100 PN-6 pipes confirming to IS 4984 complete with necessary slope and HDPE fittings specials like flanges, gaskets, bolts, nuts, washers, elbows, tees, unions, reducers, reducing tees,end caps, reducing sockets, reducing elbows, heat welding,etc.- (excluding earth excavation). Mode of measurement shall be in running Meters as described below.

20 mm diameter Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes for WATER, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement complete as per direction of Engineer-in-Charge.

CPVC ball valves 20 mm dia

Standard fittings like 1/4" ball valve -32, 1/2" ball vave -5,1/2" BSPF X 1/4" OD FH Connector-37, 1/2"x 1/4" x 1/2" od Tee SS304--15, 1/2"x 1/2" x 1/2" od Tee SS304---5, 1/2"x 1/4" reducer SS304--5, Nut Bullnose for GAS--24, Check Valve 1/4" -24 nos and nuts, ferrules, union, clamps, hardware etc.

Ball Valve 1/4 '' OD - (SS-304)

Ball Valve 1/2'' OD - (SS-304)

Connector for Fume hood 1/2'' BSPF x 1/4'' OD - (SS-304)

Tee 1/2'' x 1/4'' x 1/2'' OD - (SS-304)

Tee 1/2'' x 1/2'' x 1/2'' OD - (SS-304)

Reducer 1/2'' x 1/4'' - (SS-304)

Nut Bullnose for Gas - (SS-304)

Check Valve 1/4'' NPTM x 1/4'' NPTF - (SS-304)

Union 1/2'' OD - (SS-304)

Union 1/4'' OD - (SS-304)

Hardware - (SS-304)

MS Support for GDS & Drainage line work

Cylinder Storage Cabinets

Lab Stool

Ducting:

MS Support For Duct & Chimney Stand

Two-stage rotary vane pump