Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.7 LAccepted-AOC C 40 BHAGAT SINGH NAGAR BHIND ROAD GWALIOR MP 474005 | NA | NA | 474005 | L1 | Accepted-AOC L1 | |
| 2 | L2₹36.0 L+₹1.8 L (5.38%)Rejected-Finance KATTI GHATI SHIV COLONY ALWAR ALWAR RAJASTHAN 301001 | ALWAR | RAJASTHAN | 301001 | L2 | Rejected-Finance Not being lowest | |
| 3 | L3₹38.9 L+₹4.7 L (13.8%)Rejected-Finance 5 L LEHAL COLONY PATIALA 147001 | PATIALA | PATIALA | PUNJAB | 147001 | L3 | Rejected-Finance Not being lowest | |
| 4 | L4₹39.1 L+₹4.9 L (14.5%)Rejected-Finance | L4 | Rejected-Finance Not being lowest | |
| 5 | L5₹42.4 L+₹8.3 L (24.2%)Rejected-Finance 00 LALPUR KICHHA ROAD RUDRAPUR KICHHA RUDRAPUR UDHAM SINGH NAGAR UTTARAKHAND 263148 | UDAM SINGH NAGAR | UTTARAKHAND | 263148 | L5 | Rejected-Finance Not being lowest |
Tender Value
₹43.1 L
EMD Value
₹86,300
Closing Date
9 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Army Jaisalmer
GE Army Jaisalmer - 345001
PROVN OF THREE PHASE ELECTRIC SUPPLY, SECURITY LIGHTS AND OTHER MINOR WORKS AT CERTAIN AREA UNDER GE (A) JAISALMER
2022_MES_557348_1
8235/22-23/E8
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
Jaisalmer
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE Army Jaisalmer
₹86,300
Yes
27 Feb 2023
12 Oct 2022
11 Nov 2022
12 Oct 2022
9 Nov 2022
26 Oct 2022
Amount
S&F Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts and screws as specified type 410 SP-31 (9 metres long) complete all as specified & directed by Engineer-in-charge.
M&L for PCC (1:4:8) type D-2 using 40mm graded stone aggregate in foundation for PCC poles/struts including necessary form work complete all as specified & directed by Engineer-in-charge.
M & L for plain cement concrete (1:3:6) type C-2 using 40 mm graded stone aggregate in foundation of stay assembly including necessary form work complete all as specified & directed by Engineer-in-charge.
M&L for plain cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) for pedestal/coping/plinth of poles, including necessary form work finished even and smooth without using extra cement complete all as specified & directed by Engineer-in-charge.
Supply & laying in XLPE insulated, screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) with aluminium conductor 1100 volts grade 16 Sqmm 4 Core complete all as specified & directed by Engineer-in-charge.
Supply & laying in XLPE insulated, screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) with aluminium conductor 1100 volts grade 25 Sqmm 4 Core complete all as specified & directed by Engineer-in-charge.
Supply & laying XLPE insulated, screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) with aluminium conductor 1100 volts grade 35 Sqmm 3.5 Core complete all as specified and directed by Engr-in-Charge.
Supply & laying XLPE insulated, screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) with aluminium conductor 1100 volts grade 50 Sqmm 3.5 Core complete all as specified & directed by Engineer-in-charge.
Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, laying of cable/pipe etc or for shafts, wells, cesspits, manholes, pier holes etc not exceeding 10 Sqm on plan and getting out in hard rock complete all as specified & directed by Engineer-in-Charge. Note (i) Hard rock obtained from excavation shall be stacked properly. Stacked hard rock shall be measured by deducting 50% quantity for voids for hard rock, remaining quantity will be considered of soft/disintegrated rock. (ii) Hard rock obtained shall be issued under Schedule of credit, which shall not be allowed for uses in work.
Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, laying of cable/pipe etc or for shafts, wells, cesspits, manholes, pier holes etc not exceeding 10 Sqm on plan and getting out in soft/ disintegrated rock all as specified & directed by Engineer-in-Charge
Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soft/ disintegrated rock all as specified & directed by Engineer-in-Charge.
Removing excavated soft/ disintegrated rock to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed by the Engineer-in-Charge.
M&L for sand cushioning to under ground cable using tibba sand and gently punning to cushioning to cable complete all as directed by Engineer-in-Charge. (Note :- Punned thickness of sand cushioning shall only measured for the purpose of payment).
Supply & laying 40 to 50mm thick roughly hammer dressed Jodhpur stone patti cable cover 25cm to 30cm wide and not exc 60cm long each laid dry abutting with each other with maximum gap between adjacent slabs n. exc 10mm complete all as specified & directed by Engineer-in-charge.
S&F Lithium based energy efficient Integrated solar street light of 50 watt in single FRP body with duly polyurenthane coating encases with monocrystalline solar PV panel of 90WP mono crystalline,, Lithium battery 11.1/12.8 Volt, 44.0 Ah with inbuit BMS, ,, High brightness W-LED (160-180 Im/Watt) lamp with aluminium reflector for better lighting distribution, CRI > 70, colour temperature 6500 K, Microcontroller based charge controller cum driver, automatic dimming function with PIR motion sensor,Dusk to dawn operation, suitable for pole height 8-9 mtr ,working temp : (-30 C ) to (+) 55 C weight 18-20 KG with adjustable MS Clamp suitable for existing pole/wall mounting etc complete all as specified and directed by Engr-in-Charge. (Note : Short Circuit, overload, reverse polarity and battery protections to be provided. OEM should provide vital parameters test report from NABL accredited lab and should be of made in India with CE & TOHS complaint).
S&F Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-22 (8.5 metres long) complete all as specified and directed by Engr -in-Charge.
Supply and fixing LED street light fitting 70 Watt, 230 V AC outdoor type with RAPTOR PRO street lights are aerodynamically designed for all weather conditions with excellent thermal management, made up of pressure die cast housing with toughened glass and high power LED's with secondary optics and IP66 protection. Efficacy ≥ 110/125/135 LPW, 10KV SPD Included Make :- Axxon, Crompton, Wipo, Havells. (Cat pt No CRP-409-70-57-SL-GL-NSG) complete all as specified & directed by Engineer-in-Charge.
S & F of security light bracket with GI pipe medium grade of size 40mm dia bent to shape of length 1.2 meter including flat iron clamp made of FI 40 mm x 6 mm, nuts, bolts, washers etc( Two sets) duly painted with two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed by Engineer-in-Charge.
S&F, pole mounting box made out of PVC FR grade (Syntex) with bus bar - 03 Nos for phase & 01 No for Neutral 32 Amps supported on insulators and one No. MCB 6 Amps, clamp made out of FI 25x4mm nuts, bolts and washers etc duly painted with two coats of synthetic enamel paint over a coat of red oxide primer on clamp complete all as specified & directed by Engineer-in-Charge.
Supply and fix cable PVC isulated and sheathed 1100 volt grade aluminium conductor cable 2.5 Sqmm 3 single core and (from light fitting to PVC box) inclding clamps complete all as specified & directed by Engineer-in-Charge.
M & L Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing complete all as specified & directed by Engineer-in-Charge.
M & L bore earthing not less than 250 mm dia 16 feet deep filled with black soil up to 7 feet from bottom complete with galvanized iron pipe 40 mm bore medium grade 3 meter long tapers at bottom & provided 12 mm holes (staggered) at 75 mm centre to centre up to 2.5 meter of length from bottom , burried directly in ground filled with 45 cm alternate layer of chemical magnisium sulphate & salt up to ground levl connected to galvanized iron strip 25 x 3 mm dia as earthing lead up to Panel/DB box as per site requirement by means of bolt and nut, check nuts and washer of galvanized iron or steel including brazing work and 40mm dia light grade pipe for earth lead protection and testing point terminal coner of earthing hole by PCC chamber and GI cover and testing on on completion complete all as specified and directed.
NOTE FOR ITEM No. 21.00 & 22.00 [i]. Excavation & earth work in any type of soil including removing of surplus material upto 100M [ii]. PCC (1:3:6) type C1 using 20mm graded stone aggregate in pit & 40mm thick precast RCC (1:2:4) type B1 cover 50x50 cm with 8mm round bar @ 15 cm C/C both ways. [iii]. Main earthing strip from earth electrode to test point upto 7.5 mtr. [iv]. Funnel with watering pipe [GI pipe] 20mm bore [ISI marked] medium grade & copper lugs and charcoal & salt as reqd. [v]. GI protection pipe of size 40 mm bore light grade 7.5m.
M & L for road cutting for passing of HT/LT cable inside GI pipe of suitable size digging after laying of pipe line /cable making good surface complete all as specified and directed by Engr-in-Charge.
S & F GI Pipe 50 mm bore GI tubing "medium grade" in trench on pole gor protection of cable etc complete all as specified and directed by Engr-in-Charge.
Supply & fixing feeder pillar box out door tpye not less than 0.60 M x0.60 M x0.60 M made out of 3mm thick CRCA sheet powder coated dust & vernin proof supported on angle iron frame 40x40x5 MM ,aluminium bus bar 04 Nos rated capacity 200 Amp fpr netural supported on porcelain insulators including painting with two coats red oxide primer and pcc foundation complete all as specified & directed by Engineer -in -charge.
Supply, installation, commissioning and testing of LT panel (CPRI Approved) out door type 415 Volts, 50 Hz, 3 Phase 4 wire supply Padastal mounted double door center opening with lockng arrangement , factory assembled,CPRI approved, weather and vermin proof (protection class IP-54) canopy on top, outer door made out of 3.0 mm thick CRCA sheet for individual hinged type door for MCCBs , powder coated and supported on 50 mm x 50 mm x 6 mm angle iron frame and 3.0 mm thick MS rubber beading , complete to accommodate including the following:-
(a) Bus bar chamber comprising 4 Nos Aluminum strip bus bars air insulated and PVC sheathed capacity 160 Amps with colour coding in separate sheet steel enclosure.(set of four). (b) MCCB 415 Volts, 100Amp rating 4 pole, Breaking Capacity 16 kA -01 Nos (Incoming) Make- ABB, Scheinder, Legrand, L&T. (Icu = 100% Ics) (c) MCCB 415 Volts ,63 Amp rating 4 pole ,breaking capacity 16 KA -01 Nos (outgoing) Make -ABB,Scheinder,legarnd, L&T.(Icu=100% Ics (d) MCB TPN 63 Amp, 10 KA - 01 Nos. (e) MCB SPN 32 Amp ,10 KA -01Nos (f) Digital type VAF Meter-01 No with CTs 100/5A. (g) S&F danger notice plate 1.6 mm thick MS sheet of size 20 x15 cm .-01 No (h) PCC (1:2:4) work (j) digital advance microcontroller and real time clock base astronomical timer panel suitable Time switches 415 V three Phase of 30 Amp rating - 01 Nos. (k) Contactor 415 V three Phase of 40 Amp rating - 02 Nos.
Supply, installation, commissioning and testing of LT panel (CPRI Approved) out door type 415 Volts, 50 Hz, 3 Phase 4 wire supply Padastal mounted double door center opening with lockng arrangement , factory assembled,CPRI approved, weather and vermin proof (protection class IP-54) canopy on top, outer door made out of 3.0 mm thick CRCA sheet for individual hinged type door for MCCBs , powder coated and supported on 50 mm x 50 mm x 6 mm angle iron frame and 3.0 mm thick MS rubber beading , complete to accommodate including the following:-
M&L for point wiring with two single core PVC insulated unsheathed multistranded copper cable of size 4.0 Sqmm 1100 volts grade drawing into and incl PVC cassing capping along with its accessories of size 20 mm bore and one single core PVC insulated unsheathed multi stranded copper cable of size 4.0 sqmm ,1100 volts grade as earth continity conductor connected to common earth dolly termination directed for sheet metal enclosure box complete all as specified & directed by Engineer-in-charge.
Supply & fix water heater storage type (Geyser) vertical type, inner steel container of capacity 25 ltrs, electrically operated, AC 230 Volts, BEE 5 star rated including required Nos of fashner nuts required suitable size fixed in brick wall complete all as specified & directed by Engineer-in-charge.
Supply and fix water tubing 15 mm bore "Medium' grade Galvanised with all fitting (such as bends, elbows, tees, conectors, short piece, back nuts, unions, capa & plug etc) fixed complete to wall and ceiling or laid in floor including cutting, threading and testing complete for hot/cold water pipe line complete all as specified and directed by Engineer-in-charge.
S&F stop valve, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for 15 mm bore iron pipe or for union complete all as specified & directed by Engineer-in-charge.
Supply and fixing PVC connector pipe heavy duty 450 mm long 15 mm dia suitable for hot and cold complete all as specified & directed by Engineer-in-charge.
S&F 15 mm bore, fancy type, chromium plated, bib tap, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified & directed by Engineer-in-charge.
Supply & fixing single pole and neutral enclosure with a two pin and earth plug and socket complete with one SP MCB 20 Amps complete all as specified & directed by Engineer-in-charge.
M & L for submain wiring with approved colour code/as per IS (Red,black & green for single phase) circuit with two single core PVC insulated cable with multistranded copper conductor of nominal cross sectional area of 6.00 Sqmm (FRLS) in casing caping including one run of PVC insulated multistranded copper conductor nominal cross sectinal area of 6.00 Sqmm (FRLS) of continous earth wire green in colour complete all as specified & directed by Engineer-in-charge. (Note :- Two runsof 6.00 Sqmm cable & one run of 6.00 Sqmm cable shall be paid as one unit length)
S&F Double door MCB distribution board SPN, 240 volts, 4 ways powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required complete all as specified & directed by Engineer-in-charge.
S&F double door MCB distribution board SPN, 240 volts, 2 ways powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required complete all as specified & directed by Engineer-in-charge.
Supply and fixing MCB's single pole and neutral 40 to 63 Amps, 240 Volts,10 KA rapturing capacity 'C' curve complete all as specified & directed by Engineer-in-charge.
Supply and fixing MCB's single pole 20 Amps to 32 Amps, 240 Volts,10 KA rapturing capacity 'C' curve complete all as specified & directed by Engineer-in-charge.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .