Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.5 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹30.5 L+₹80,482 (2.71%)Rejected-Finance KHAWAS BUILDING BELOW PAIZOR STADIUM GANGTOK 737101 SIKKIM | GANGTOK | EAST DISTRICT | SIKKIM | 737101 | L2 | Rejected-Finance Higher bidder value | |
| 3 | L3₹31.8 L+₹2.1 L (6.92%)Rejected-Finance | L3 | Rejected-Finance Higher bidder value | |
| 4 | L4₹31.8 L+₹2.1 L (7.13%)Rejected-Finance | L4 | Rejected-Finance Higher bidder value | |
| 5 | L5₹32.2 L+₹2.5 L (8.49%)Rejected-Finance | L5 | Rejected-Finance Higher bidder value |
Tender Value
₹29 L
EMD Value
₹58,000
Closing Date
9 Jun 2025, 6:00 pmClosed
GE Gangtok
GE Gangtok New Mil Stn Gangtok, Sikkim PIN-737102
REPAIR MAINT OF JHORA NALAs STAIRS DRAINS PATHWAYS AT NEW CANTT UNDER GE GANGTOK
2025_MES_701650_2
8327/A/E8
Open Tender
Miscellaneous Works
Works
243 days
GE Gangtok New Mil Stn Gangtok Sikkim
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE Gangtok
₹58,000
Yes
21 Jun 2025
12 May 2025
11 Jun 2025
13 May 2025
9 Jun 2025
26 May 2025
Amount
Demolition of cement concrete (un-reinforced) of any description and in any position not specifically provided for complete all as specified and directed.
Demolition of Stone slabs and tiles of any description or thickness laid dry or dry and pointed in floors, aprons etc complete all as specified and as directed.
Demolition of Stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar floors, aprons etc complete all as specified and as directed.
Demolition of precast block masonary or precast concrete article built in cement mortar complete all as specified and as directed.
Demolition of brickwork or stone / boulder masonary, built in cement mortar including all quoins, arches, pillars, etc but exclusing ashlar facings, dressed stoneswork and precast concrete articles complete all as specified and as directed.
Taking down cement plaster on brick or stone walls or concrete surface, including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for precast PCC (1:3:6) type C1 (by using 20mm graded crushed stone aggregate) block masonry with solid blocks, exc 10 cm in width and setting in CM (1:6) complete all as specified and directed.
M&L for PCC (1:3:6), type C-2 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified & as directed.
M&L for PCC (1:3:6), type C-1 (using 20mm graded stone aggregate) as in coping complete all as specified & as directed.
M&L for stone walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar (1:6) including brought up to courses complete all as specified & as directed.
All as per item No 10.00 here-in-before but except stone. NOTE:- Stone boulders obtained from item No 05.00 here-in-before shall be reused.
Hand packing (any thickness) at back of walls over arches etc. and raising (or lowering) to the required level. NOTE:- Stone boulders obtained from item No 05 here-in-before shall be reused.
M&L for 75mm thick PCC (1:3:6) type C-2 (using 40 mm graded crushed stone aggregate) as in plinth protection path/hardstanding/drain bed/ jhura bed finished cement concrete surfaces fair and even including forming construction joint filled with CM (1:6) complete all as specified & as directed.
M&L for 100mm thick PCC type C-2 (1:2:4) (using 40 mm graded crushed stone aggregate) as in path/hardstanding/steps/drain bed/ jhura bed finished cement concrete surfaces fair and even including forming construction joint filled with CM (1:4) all as specified & directed.
M&L for rendering 20 mm thick in CM (1:6) on stone masonry surfaces, finished even & fair with using extra cement complete all as specified and as directed.
M&L for rendering 15 mm thick in CM (1:4) on other than fair faces of brick or concrete surfaces, finished even & fair with using extra cement complete all as directed.
M&L Lacquer coated coloured chequered cement concrete tiles 300 x 300mm x 25mm thick set, jointed and pointed in neat slurry in floors and steps with grey cement and pigments over and incl 15mm thick screed bed or bedding layer of motar for laying floor finishes in cement plaster (1:4) complete all as specified and as directed.
M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.
M&L for Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and as directed.
All as per item No 19.00 here-in-before but except Tiles
M&L for Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade complete all as specified and as directed.
All as per item No 21.00 here-in-before but except Tiles
S&F for PVC(SWR) 75mm pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor with necessary clamps, bolt, bends, Tee complete all as specified and directed.
M&L PCC (1:3:6) type C2 (using 40mm graded crushed stone aggregate) as in surface channels/drain including formwork to forming fair finished to drain channel complete all as specified and directed.
M&L for formwork to faces of walls, retaining walls, abutments, parapets and staircase railing and similar work including attached pillasters, buttresses, etc.; vertical or to better in rough finished surfaces complete all as specified and directed.
M&L for Plain cement concrete (1:3:6), type C-2 as in retaining walls etc complete all as specified and as directed.
Demolition of reinforced cement concrete of any description and in any position complete all as specified and directed.
M&L RCC (nominal mix) type B1 (1:2:4) using 20 mm graded stone aggregate as in RCC band complete all as specified and as directed.
M&L for Mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking , bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips.complete all as specified & as directed.
M&L for Mild steel TMT bars 6mm to 8mm dia and over cut to length, bent to shape required, including cranking , bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified & as directed.
M&L for Raking out joints/ pointing to random rubble orpolygonal rubble uncoursed complete all as specified and directed.
M&L for raised pointing in cement mortar (1:4) random rubble masonry, uncoursed or brought upto courses complete all as specified and directed.
MAHENDRA KHAWAS (BID ID -3310332)
DHARMINDER SINGH (BID ID -3305799)
BIJAY MITTAL (BID ID -3305398)
RAAJ BANGAR (BID ID -3306216)
KARMA TSETEN BHUTIA (BID ID -3310937)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .