Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.2 LAccepted-AOC SUBAN BAZAAR DIGLIPUR NORTH ANDAMAN 744202 | DIGLIPUR | NORTH ANDAMAN | ANDAMAN AND NICOBAR ISLANDS | 744202 | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹21.8 L+₹9,630 (0.44%)Rejected-Finance | L2 | Rejected-Finance HIGHEST BIDDER | |
| 3 | L3₹23.7 L+₹2.0 L (9.17%)Rejected-Finance 21 BUS STAND ROAD PALI PALI PALI RAJASTHAN 306401 | PALI | RAJASTHAN | 306401 | L3 | Rejected-Finance HIGHEST BIDDER | |
| 4 | L4₹24.0 L+₹2.3 L (10.5%)Rejected-Finance | L4 | Rejected-Finance HIGHEST BIDDER | |
| 5 | L5₹28.0 L+₹6.3 L (29.0%)Rejected-Finance 254 MG ROAD LAMBA LANE JUNGLIGHAT PORT BLAIR SOUTH ANDAMAN ANDAMAN AND NICOBAR ISLANDS 744103 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744103 | L5 | Rejected-Finance HIGHEST BIDDER |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
19 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Maj Saurabh Prashar, Offg Garrison Engineer
GE (South) Diglipur RK Gram Diglipur North Andaman 744202
REPAIRS / REPLACEMENT OF SEWAGE LINES, CLEANING OF SEWAGE SYSTEM AND PERIODICAL SERVICES TO CERTAIN BLDGS AT DIGLIPUR UNDER GE (S) DIGLIPUR
2023_MES_625050_2
8939/E8
Open Tender
Civil Works
Item Rate
270 days
DIGLIPUR
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
Yes
GE (South) Diglipur
₹60,000
Yes
13 Feb 2024
21 Nov 2023
21 Dec 2023
21 Nov 2023
19 Dec 2023
5 Dec 2023
Amount
Clearing away all grass, vegetation, saplings, shrubs, brush-wood, under-growth, roots and trees not exceeding 30 cm girth (measured one metre above ground level) for making approach to septic tanks, around manholes, manhole to manhole for sewage lines and removing rubbish upto a distance of 50 metres all as specified and directed by Engr-in-charge.
Excavating in trenches, not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for laying drain pipes or for manholes etc. area not exceeding 10 Sqm on plan and getting out in soft/ loose soil complete all as specified and directed.
Excavating in trenches, not exceeding 1.5 mtr wide and exceeding 1.5 mtr but not exceeding 3 mtr in depth; for laying drain pipes or for manholes etc. area not exceeding 10 Sqm on plan and getting out in soft/ loose soil complete all as specified and directed.
Demolition and breaking up drain pipes of 150 mm internal dia (Salt glazed stone ware, CI or reinforced concrete) set in cement mortar including bedding, haunching complete all as specified and directed.
Demolition and breaking up drain pipes of 100 mm internal dia (Salt glazed stone ware, CI or Reinforced concrete) set in cement mortar including bedding, haunching complete all as specified and directed.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for and removal of debris to a distance exceeding 500 mts and depositing where directed.
Demolition of cement concrete of any description and in any position not otherwise specifically provided for and removal of debris to a distance exceeding 500 mts and depositing where directed.
Demolition of brickwork or stone/ boulder masonry or PCC block masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc. but excluding ashlar facings, dressed stonework and precast concrete articles and removal of debris to a distance exceeding 500 mts and depositing where directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified.
M&L 150 mm bore cast iron soil, spun, waste and vent pipes in any length with spigot and socket ends including cement joints and all new fittings laid in trenches or in floors/walls complete all as specified and directed.
M&L 100 mm bore cast iron soil, spun, waste and vent pipes in any length with spigot and socket ends including cement joints and all new fittings laid in trenches or in floors/walls complete all as specified and directed.
M&L for PCC (1:4:8) Type D2 (using 40mm graded granite stone aggregate) as in foundations, filling and mass concrete complete.
M&L for PCC 1:3:6 Type C2 (using 40mm graded granite stone aggregate) concrete bed to drain pipes including packing under, and haunching against the sides of pipes 150 mm bore after they are laid and tested all as specified and directed.
M&L for PCC 1:3:6 Type C2 (using 40mm graded granite stone aggregate) concrete bed to drain pipes including packing under, and haunching against the sides of pipes of 100 mm bore after they are laid and tested all as specified and directed.
M&L Pre-cast cement concrete Type C1, 1:3:6 (using 20mm graded crushed granite stone aggregate), block masonry with solid blocks, exceeding 10 cm in width with minimum compressive strength of 50 Kg/ Sqcm and setting in cement mortar 1:6 complete.
M&L for rendering 15 mm thick CM (1:4) on fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) complete all as specified. Note: If Water proofing compound is mixed, WPC shall be measured and paid separately.
Supply only Integral waterproofing compound.
M&L for PCC (1:2:4) Type B1 (using 20mm graded granite stone aggregate) as in coping, benching of manholes etc, and including necessary formwork all as specified and directed.
M&L RCC (1:2:4) Type B1 (using 20mm graded granite stone aggregate) in slabs supported on walls for septic tanks etc. and set in cement mortar 1:4 complete all as specified.
M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), for flat rough finished surfaces of concrete complete all as specified and directed.
M&L for high yield strength deformed TMT steel bars 10 mm dia and over as in reinforcement for concrete, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L precast RCC (1:2:4) Type B1 (using 20 mm graded granite stone aggregate) as in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in CM 1:6, including necessary formwork complete. Note: Reinforcement shall be measured and paid separately.
S&F in repair 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls incl clamps complete.
S&F in repair 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls incl clamps complete.
S&F in repair 110mm bore PVC (SWR) vent cowl complete.
S&F in repair 75mm bore PVC (SWR) vent cowl complete.
S&F in repair 110 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal for oval access door complete.
S&F in repair 75 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal for oval access door complete.
S&F in repair 110 mm bore PVC (SWR) bends any radius complete.
S&F in repair 75 mm bore PVC (SWR) bends any radius complete.
M&L for rendering 10mm thick on fair faces of wall surfaces, in cement and sand mortar 1:4 finished even and fair to receive tile complete all as specified.
M&L for 15mm thick screed bed or bedding layer on floor surfaces, in cement mortar 1:6 for laying of floor finishes complete all as specified.
M&L non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete.
M&L non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete.
M&L glazed coloured ceramic tiles 300x 200x 7 mm thick on vertical surface, set and jointed in neat cement slurry and pointed in white or colour cement to match complete.
M&L glazed coloured ceramic tiles 450x 300x 7 mm thick on vertical surface, set and jointed in neat cement slurry and pointed in white or colour cement to match complete.
S&F in repairs vitreous China wash down water closet pan EWC (pedestal pattern), white, (excluding flushing cistern and flush pipe), with 'P' or 'S' trap and including plastic water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, including connection to drain (or outgoing pipe) and to flushing pipe, etc.complete all as specified.
S&F in repairs vitreous China water closet (squatting pan), ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including provision of lime concrete bedding complete all as specified.
S&F in repairs 10 litres capacity, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle and flushing pipe including brackets specified complete all as specified.
Cleaning of blockage of sewage lines up to 150 mm bore systematically using necessary tools mechanically and /or manually such as by rodding, passing rope knots, bamboo fanti and disc of required size (with safety measure such as dirt and gas etc), flushing the pipe well with water till clear flow of sewage from both side between two adjacent manhole/grease traps of any depth, taking out sludge in semi liquid stage including all water effluents etc in a closed container and removing all materials from site of work upto a distance exceeding 250 mtr but not exceeding 500 mtr and depositing in earth pit of suitable size including supply and sprinkling bleaching powder and covering sludge with earth after removal of blockage etc complete all as specified and directed by Engineer-In-Charge. Note: Length will be measured throughout the manholes for each time of cleaning.
Cleaning of septic tanks completely by emptying liquid, semi solid, solid foul contents cleaning of inlets, outlets and getting out using suction pumps and filling the foul material into the covered tanks attached to suction pump and removing and disposing the same at a place meant for disposal of foul material outside the Defence area complete all as specified and directed by Engineer-In-Charge.
Cleaning of manhole / gully trap / floor trap blockages (including WC, urinal, kitchens and bathrooms) systematically using necessary tools mechanically and/or manually such as by rodding, bamboo fanti and disc of required size (with safety measure gas etc), flushing the pipe well with water till clear the flow of sewage from both side between two adjacent manhole/gully traps or WC/NT of any size or depth, taking out sludge in semi liquid stage / roots of the tree etc. including all water effluents etc and removing all materials from site of work upto a distance exceeding 50 mtr and depositing in earth pit of suitable size including supply and sprinkling bleaching powder and covering sludge with earth after removal of blockage etc complete all as specified and directed by Engineer-In-Charge.
M & L for cast iron nahani trap/ gully trap 125/100mm diameter of outlet setting and jointing with solvent cement incl taking down complete all as specified and directed.
M & L for 100 mm bore cast iron floor trap with stainless steel grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) with solvent cement incl taking down, complete all as specified and directed.
Returning, filling in in soft/ loose soil, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm.
Removing excavated soil material not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point.
M&L for preparing plastered or unplastered old decorated surfaces of walls and applying one coat of white wash complete all as specified and directed.
M&L for preparing plastered or unplastered old decorated surfaces of ceiling and applying one coat of white wash complete all as specified and directed.
M&L for preparing plastered or unplastered old decorated surfaces of walls and applying one coat of cement based paint complete all as specified and directed.
M&L for preparing plastered or unplastered old decorated surfaces of walls and applying one coat of distemper oil emulsion paint complete all as specified and directed.
M&L for preparing plastered or unplastered old decorated surfaces of ceiling and applying one coat of distemper oil emulsion paint complete all as specified and directed.
M&L for complete removal of existing treatment (i.e. white wash, colour wash, cement base paint, synthetic enamel paint etc.) from wall surfaces and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over surfaces complete all as specified and directed.
M&L for complete removal of existing treatment (i.e. white wash, colour wash, cement base paint, synthetic enamel paint, etc.) from ceiling surface, filling cracks with wall care putty on surface to make smooth where ever necessary and applying two coats of distemper oil emulsion complete and as specified.
M&L for preparing old painted steel surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparing old painted wooden surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. and removal of debris to a distance exceeding 500 mts and depositing where directed.
M&L for rendering 15 mm thick in cement and sand mortar 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) complete all as specified.
M&L for 15 mm thick rendering in patches on brick work or concrete surfaces in two coats of 10 mm thick in CM 1:6 as under coat and 5 mm thick in CM 1:4 as finishing coat in two separate layers, mixed with integral water proofing compound in finishing coat only @ 2% by weight of cement, finished even and smooth without using extra cement complete all as specified and as directed. Note: Water proofing compound shall be measured and paid separately.
Supply only Integral waterproofing compound .
M&L for preparing newly plastered surfaces of walls and applying two coats of cement based paint over a coat of primer complete.
M&L for finishing walls with acrylic Smooth exterior paint of required shade : New work (Two or more coats applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified.
M&L for preparing newly plastered surfaces of walls and applying two coats of distemper oil emulsion paint over a coat of chalk whiting primer complete.
RADHA GOVIND CONSTRUCTION
M/s Sharma Trading Company
R DHARMALINGAM
Kakolil Trade Agencies
Binod Hawlader
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .