SPECIAL REPAIRS TO BLDG No T-15 (OTHER RANK MD ACCN) AT AUNDH UNDER GE MH AND RH KHADKI

Amount

Dismantling Asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings complete all as specified and directed.

M&L for 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with 'L' or 'J' or cranked hook bolt.

All as per item No 02 here-in-above but except sheets only.

M&L for asbestos cement two piece adjustable plain wing ridge 6mm thick.

Dismantling structural steel work including doors, gates but excluding framed truss etc.

M&L for rolled mild steel joist, channel, angle, or tee sections, fixed independently, without connection plate, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) (Fe 410 W (Grade E 250) quality A) complete all as specified and directed.

M&L for Rolled mild Steel for roof trusses (framed) tussed, purlins, crane gantries rails and fastenings and heavy brackets framing (Beam, tee angle channels or flat sections) including distance pieces and cleats etc.(Fe 410 W (Grade E 250) quality A) complete all as specified and directed.

Demolition of cement concrete (un reinforced) any description in any position not otherwise described including removing the spoil off the premises complete all as specified.

M&L for 75mm thick PCC M-7.5 grade (nominal mix) using 40mm graded stone aggregate as in sub base to floor finish complete.

Dismantling floor, hearth or wall tiling including cement mortar bedding/ complete and removing rubbish off the premises complete all as specified and directed.

M&L colourd Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or colourd cement to match with colour of tile laid over and including 15 mm thick screed bed in CM 1:6 complete all as directed.

All as per item No 11 above but as in dado/skirting, set and jointed in neat cement slurry and pointed in white or colourd cement to match with colour of tile laid over and including 10mm thick backing coat in CM 1:4, set and jointed in neat white or colourd cement to match the surfaces of tiles all as specified and directed.

M&L colourd Non Skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.06 but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or colourd cement to match the shade of the tiles laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engr-in-Charge.

Taking down chowkhat without taking off shutter from frame exc 1.5 and n exc 4 sqm each and removing from site complete all as specified and directed

Taking down chowkhat without taking off shutter from frame n.exc 1.5 sqm each and removing from site complete all as specified and directed

S&F 105x60 mm pressed steel frames made out of 1.25mm steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., with one shop coat of red oxide primer complete, as specified, supplied and fixed all as specified and directed by Engr-in-Charge.

S&F 125x60 mm pressed steel frames made out of 1.25mm steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., with one shop coat of red oxide primer complete, as specified, supplied and fixed all as specified and directed by Engr-in-Charge.

Cutting holes in existing wall or PCC Block masonry built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting holdfast and making good dismantled portion in cement mortar 1:3 or cement concrete M-15 grade (nominal mix) as required depth of embedded portion of holdfast or lugs measured from the face of jamb into the wall exceeding half brick but not exceeding one brick all as directed.

M & L for cement concrete M-15 grade (nominal mix) using 12.50mm graded stone aggregate for filling in pressed steel door frames complete all as specified and directed

S&F of 35mm thickness 2nd class HW rail and style of factory made shutter of plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated all as specified and directed by Engr-in-Charge.

S&F 35mm thick factory made IInd class hard wood glazed and skelton door shutters (two pannel) open rebated and prepared to receive glass/wire gauze etc, (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for receving glass etc sizes of members ofshutters as specified in SSR Part -Isection 8, clause 8.20 (a) supplied and fitted to chowkats.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing all as specified and directed.

S&F factory made PVC solid panel door shutter 30mm thick (style) connecting of frame made out of MS tube for top and bottom rail. MS frame shall be coverd withheat moulded plain coour PVC 'C' channel having a PVC sheet strips of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail of either side and as gap insert for toprail and bottom rail panellinn of plain colour PVC to be fitted in the ms frame welded/ sealed in the stiles and rail with suitable PVC sheet and loading and jointed together with solvent cement, supplying and fixing in the frame at site all as directed by Engr-in-Charge.

M&L for preparation of new wooden surfaces over 10cm in width or girth and applying two coats of synthetic enamel paint of approved colour over a coat of pink primer complete all as specified.

M&L for preparation of new steel surfaces over 10cm in width or girth and applying two coats of synthetic enamel paint of approved colour complete all as specified.

S & F in repairs 150 mm size mild steel pressed handles, oval type, stove enamelled black complete.

S&F Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed length of bolt 150mm all as specified and directed.

S&F 300mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed ISI marked all as specified

S&F 100 mm stainless steel butt hinges medium weight, cold rolled all as directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, with shop coat of red oxide primer complete without glazing bars, dovetailed or welded all as specified and directed.

All as per item No 30 above but without glazing bars (for mosquito proof shutter)

S&F aluminium louvered ventilators of section size 100mm x 25mm x 1.50mm including frosted glass fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh fixed type on outside frame etc. including taking down existing steel ventilator all as directed by Engr-in-Charge. Note : Glass & wire mesh shall be deemed to be included in unit rate quoted.

Supply and fix in repairs galvanized MS wire cloth, 0.63 mm nominal dia of wire & average width aperature 1.40 mm & fixed with tinned tacks or galvanized wire stapples complete all as specified and directed.

Demolition of brick work or stone / boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles all as specified and directed.

M & L providing precast cement concrete solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) Type C1 1:3:6 (20mm graded aggregate) aggregate setting in mortar, complete, in wall in cement mortar 1:6

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

M & L rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces and finishing surfaces even and smooth without using extra cement.

M & L 15 mm thick (10mm+5mm) plaster on fair faces of brickwork / concrete or PCC block masonry in CM 1:4 and surface finished even and fair by mixing liquid waterproofing compound as per manufacturers instructions complete. Note: Liquid WPC shall be measured & paid seperately under relevant item of this BOQ.

M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer including prepration complete all as specified and directed by Engineer- in-charge.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed.

M & L for complete removal of existing finishes by scraping down old decorative surface of walls with steel wire brushes of smoke spots, moulds, efflorescent salts including filling of spots with POP/ Birla putty and making smooth surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer all as directed.

M & L for complete removal of existing finishes by scraping down of old decorative surface of walls with steel wire brushes of smoke spots, moulds, efflorescent salts including filling of spots with POP and applying of two coats of cement base paint over a coat of primer all as specified and directed.

M&L for preparation of plastered or unplastered, old decorated surfaces of walls and applying one coat of white wash on wall complete all as specified and directed by Engineer- in-charge.

Taking up or down steel tubing 15 mm dia and connection including cleaning for refixing and removing to store & complete all as specified and directed by Engr-in-Charge.

Taking up or down steel tubing 20 mm dia and connection including cleaning for refixing and removing to store & complete all as specified and directed by Engr-in-Charge.

S&F 15mm bore tubes, medium grade, galvanised, with all fitting including cutting chases for concealed water tubing & fixed complete concealed to walls & ceiling and making good walls & ceiling after testing of fittings complete all as specified and directed by Engr-in-Charge.

Fixing only tubes of 15mm bore, any grade, concealed to walls & ceiling and making good walls & ceiling after testing of fittings complete all as specified and directed by Engr-in-Charge.

S & F 20 mm bore tubes, medium grade, galvanised, with all fitting including cutting chases for concealed water tubing & fixed complete to walls & ceiling or laid in floors.

Fixing only tubes of 20 mm bore, any grade, to walls and ceiling or laying in floors.

S & F in repairs stop valves suitable for 15 mm bore iron pipe, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for concealed iron pipe or for unions.

S&F 15mm dia CP Bib taps chromium plated cast copper ally with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed.

S & F in repairs PVC connection of 600 mm length, suitable for 15 mm bore pipe with PTMT nuts.

S & F in repairs PVC flushing cistern 10 ltr capacity of approved make including flushing pipe, brackets, lever/ handle.

S & F in repairs Vitreous China Squatting pan Orissa pattern long pan, size 580 mm x 440mm white with `P' or `S' trap, front or back inlet and foot rests any pattern including connection to trap and to flushing pipe, anti-syphonage pipe etc, including trap set in and including concrete complete including making good to floor all as specified and directed.

S&F in repair PVC (SWR) pipes 110 mm dia single sockets, in any length rubber ring joints, and fixed to wall including suitable MS clams.

S&F in repair PVC (SWR) pipes 75 mm dia single sockets, in any length rubber ring joints, and fixed to wall including suitable MS clams.

S&F PVC (SWR) 110mm dia bends any radius as in repair.

S&F PVC (SWR) 75mm dia bends any radius as in repair.

S&F PVC (SWR) pipes 75mm dia single sockets, in any length rubber ring joints, laid in trenches or in floors as in repairs.

M&L two coats of synthetic enamel paint on old steel surfaces of any description exc 10 cm width or girth including preparation of surfaces

Supply and fix 500 liters capacity triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete.

S & F in repairs 15mm dia bore Gun metal, globe or gate valves with Iron wheel head, screwed both ends for Iron pipes and fixed.

S & F in repairs 20mm dia bore Gun metal, globe or gate valves with Iron wheel head, screwed both ends for Iron pipes and fixed.

S & F in repair stop valves, fancy type cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions & fixed - bore dia of pipe 15 mm but fancy type with long shank and cup (concealed type) complete all as specified and directed by Engineer in Charge.

S&F in repairs vitreous china wash basin white, flat back of size 450 x 300mm, excluding taps, waste chain & plug & porcelein stopper but including brackets, cutting for and pinning in ends of brackets including waste coupling and waste pipe all as directed

S&F in repair pillar taps fancy type cast copper alloy with capestan heads chromiun plated screwed down high pressure with hot & cold with long screwed shanks and fly nuts all as specified and directed.

S&F in repairs tubular towel rail 20mm dia, D type 60cm long between flanges brass chromium plated all as specified and directed.

M&L for 75mm thick PCC M-10 grade (Nominal mix) as in plinth protection Path, floor all as specified and directed.

S & F in repair 120mm shower rose chromium plated with or without swirel joints including fixing to steel pipe of 15 mm bore.

S&F Pre polished chequered cement concrete tiles glossy and rubburised finish colour 30cm x 30cm x 25mm thick, set, jointed and pointed in near cement slurry in floors over & including 15mm thick screed bed in CM 1:4 under tiles including all as specified and directed by Engineer-in-Charge.

Taking down carefully copper/aluminium point wiring (light, Fan, or power) complete and making good distrubed surfaces of wall/floor/ceiling etc complete all as directed.

M & L for point wiring complete with and including 1.5 sqmm (nominal area) single core multi stranded copper conductor PVC insulated but unsheated FRLS cable 1100 Volts drawn in to and including concealed PVC conduit of suitable dia includings sunken to wall including its accessories such as tee, bend ,elbow, socket and chisselling on wall complete and al so making good the disturbed surfaces of wall / ceiling by cement mortar 1:4 including painting to existing surfaces and also including 1.5 sqmm PVC insulated and PVC unsheathed single core multistranded copper conductor FRLS cable 1100 V grade as earth wire including concealed MS terminal box ISI marked of suitable size / 3 mm thick hylam sheet on MS terminal box for housing switch, socket, regulators etc complete for the following:-

One light point controlled by one switch

One Fan point controlled by one switch

One 5 pin 6 Amps socket outlet on independent board.

One 5 pin 6 Amps socket outlet on same board.

Bell /buzzer point controlled by one push button on the same board with other switches or indipendent with cables 1.5 sqmm size.

All as per item No 74 here-in-before but wiring with 2.5 sqmm single core multi stranded copper condcutor 1100 v grade PVC insulated but unsheheted single core multi stranded PVC insulated unsheathed copper conductor cable 1100 volts grade for 16 Amps power point on independent board and 1.5 sqmm cable as earthwire.

S & F switch piano type 250 volts single pole one way 6 Amps all as specified and directed.

S & F socket outlet 5 pin 6 Amps shuttered flush type all as specified and directed.

S & F socket outlet 2 in 1, 3 pin, 6 and 16 Amps flush type all as specified and directed.

S & F switch piano type 250 volts single pole one way 16 Amps all as specified and directed.

S & F PVC ceiling rose / Angle Holder / Batten Holder surface type three terminals type all as specified and directed.

S & F fan regulators electronic step type suitable for 1200/1400 mm sweep ceiling fans.

S & F Bell push flush type 5 Amps 230 V

S & F Bell AC 230 V single pole as directed by Engineer in charge

Supply and fixing LED lights fitting 1x 22W, 220V, AC decorative box type, holder including LED tube rod connecting up with three core flexible copper conductor cable of suitable size from ceiling rose incl takingdown all as specified and directed by Engr-in-charge.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size incl takingdown all as specified and directed by Engr-in-charge

Supply and fixing LED street light fitting 36 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection incl takingdown all as specified and directed by Engr-in-charge

S & F distribution board factory made TPN 4 way in, 415 Volt, Double door metal type suitable for fixing MCBs as out going and including TPN MCB 63 Amps as main incoming incl takingdown all as specified and directed by Engr-in-charge. Note : Cost of MCBs will be measured and paid seperately.

S & F distribution board factory made SPN 8 way in, 240 Volt, Double door metal type suitable for fixing MCBs as out going and includinguding SPN MCB 32 Amps as main incoming including takingdown all as specified and directed by Engr-in-charge. Note : Cost of MCBs will be measured and paid seperately.

S & F MCB TPN 63 Amps 'B' series 10 KA with two position DIN Rail clamp including takingdown all as specified and directed by Engr-in-charge.

S & F MCB SPN 32 Amps 'B' series including takingdown all as specified and directed by Engr-in-charge

S & F MCB SP 5 to 30 Amps 'B' series 10 KA with two position DIN Rail clamp including takingdown all as specified and directed by Engr-in-charge.

S&F PVC blank plate suitable for MCB DB.

M&L for sub main wiring but using two single core multistranded PVC insulated copper conductor of size 4 sqmm 1100 volt grade drawn into rigid non metalic concealed conduit ISI marked including 2.5 sqmm PVC multi standard cable in green colour for continueous earth wire. Note; 4.0 Sqmm cable two run, 2.5 Sqmm cable one run complete all as specified and directed by Engr in Charge

M&L for earthing with galvanised steel earth plate electrode 60cm x 60 cm x 3.15 mm burried directly in ground earth pit not less than 2.25 mtr deep below normal ground level with top edge of the plate vertically to depth of not less than 1.5 mtr below ground level connected to earth lead of 4mm dia galvanised iron or steel, 7.5 mtr beyond the earth pit as earthing lead including GI protection pipe 40 mm bore (light grade) burried in ground at a depth of 300 mm upto 7.5 mtr beyond the earth pit and connecting to equipments by means of earthing lead , GI bolts, nuts & washer etc with provision of char-coal and salt etc all as per electrical plate No 3 of SSR Part-I, 2009 including RCC cover and MS angle iron frame watering arrangements with GI pipe 20 mm dia (medium grade) & MS funnel, concrete pit including excavation and earthwork and testing on completion etc complete incl takingdwon all as specified and directed by Engr-in-charge. Note : Rate of item is deemed to be included for excavation in hard rock, by compressor machine to achieve required depth.

S & F earth continuity conductor or main earthing lead fixed on wall on battam or recess or cheases or buried on ground or drawn in conduit or pipe any other situations loop earthing etc as required of 4 mm dia GI wire.

V.R.PRAJAPATI AND CO.

M/S JAYCONSTRUCTION CO

M/S J J ENTERPRISES

Ajinkya Constructions