CERTAIN BR REPAIR WORKS TO SECURITY INFRASTRUCTURE AND PERIMETER PATH ETC INSIDE CABS CEMILAC AND STIR UNDER AGE BR II AT BANGALORE

Amount

Demolition of brickwork or stone / boulder masonry, built in cement mortar / lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and as directed.

Material and labour for Pre-cast cement concrete block masonry with solid blocks, type B1, (1:2:4) using 20mm graded stone aggregate exc.. 10 cm in width and setting in cement mortar (1:4) complete all as specified and as directed.

Material and labour for RR stone masonary, Bangalore type brought upto course, well bonded and bedded and solidly hearted built in CM (1:6) complete all as specified and as directed..

Material and labour for keyed pointing on new or old stone masonry in cement mortar (1:4) including rakingout joints etc complete all as specified and as directed.

Taking down cement plaster on brick work / stone walls / PCC & in drain walls including raking out joints, hacking for key scrubbing down with water etc of any position and any description complete all as specified and as directed.

Material and labour rendering 15mm thick in CM (1:4) over stone masonry / brick masonry / also in drain walls surface finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for preparation of new plastered surface of walls and applying two coats of cement base paint of approved tint over a coat of primer, complete all as specified and as directed.

Material and labour for Plain Cement Concrete, (1:2:4), type B1 using 20mm graded stone aggregate as in coping including necessary form work complete all as specified and as directed.

Demolition of concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Material and labour for Plain Cement Concrete, (1:3:6), type C2 using 20mm graded stone aggregate as in surface channels and drains complete all as specified and as directed.

Extra for forming fair finished drain or channel upto 55 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc. complete all as specified and as directed.

Material and labour for Plain Cement Concrete 100mm thick (1:2:4), type B2, using 40 mm graded crushed stone aggregate as in hard standing/foot path and in PCC road etc complete all as specified and as directed.

Dismantling barbed wire (including concertina coils) of any description including serviceable barbed wire in safe custody for reuse at site, complete all as specified and as directed.

Restraining and resecuring including making good staples etc. for galvanised 2 strand, steel barbed wire including straining and fixing to any type of standard rails, straining bolts, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc, complete all as specified and as directed. NOTE :- (i) Serviceable barbed wire obtained from Sl Item No. 13 here-in-before shall be re used. (ii)) Cost of Mild Steel binding wire is deemed to be included in the unit rate quoted.

Material and labour for galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed. NOTE :- Cost of mild steel binding wire is deemed to be included in the unit rate quoted.

Supply and fix 450mm dia punched type concertina coil having 51 spiral turns, 1.75mm dia wire with 9 rows of clip and stretched upto 5 mtr to get a spiral spacing of 150mm dia with 4 kg per coil complete all as specified and as directed.

Supply and fix 600mm dia punched type concertina coil having 51 spiral turns, 1.75mm dia wire with 9 rows of clip and stretched upto 5 mtr to get a spiral spacing of 150mm dia with 5 kg per coil complete all as specified and as directed.

Dismantling mild steel work of any description like MS grills / MS angles in fencing / gates in ground and over wall of height upto 4mtr and similar items complete all as specified and as directed.

Material and labour for rolled mild steel sections as in framed work of doors or gates/grills of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete (Fe 410-W (Gde-E-250) quality- A complete all as specified and as directed.

Material and labour for hard drawn steel wire fabric (dia of wire 3-4mm) size of aperture in mesh(25x25/50x50) to be welded in iron angles complete all as specified and as directed.

Material and labour Reinforced Cement Concrete, type B1 (1:2:4) using 20mm graded stone aggregate for lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.

Dismantling fencing wire mesh of any type complete all as specified and as directed.

Dismantling posts or struts (wood, steel or RCC) any section, posts, embedded in cement concrete including taking out embedded portion and making good disturbed ground, complete all as specified and as directed.

Supply only chain link MS galvanised fencing any size or type complete all as specified and as directed.

Fixing only chain link fencing including line wires any mesh size and type to any type of standards rails straining bolts etc including provision of binding wire if required complete all as specified and as directed. NOTE :- Welding if done, shall be measured and paid in appropriate item

Supply and fixing of post and struts in fencing including cutting tops to shape as directed drilling holes notching for wire etc flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe 290 gde E - 165 including fabrication at site complete all as specified and as directed.

Material and labour preparing new steel and iron surfaces of any description, over 10 cm in width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of red oxide zinc chrome primer, complete all as specified and as directed.

Excavating in post holes (or similar holes) in hard/dense soil, each not exc. 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc. 25 cm thick, watering, and removing surplus soil to a distance not exc 50.00 metre and making good surface, complete all as specified and as directed.

Material and labour Plain Cement Concrete, (1:4:8), type D2, using 40mm graded stone aggregate as in foundations, filling and mass concrete, etc. for foundation and filling of hume pipe culvert, as in drain/ embedding / fixing RCC fencing posts or struts including use and waste of form work as required / ordered, complete all as specified and as directed.

Supply and fix rolled mild steel as in angle, flat or tee sections, fixed independently, without connection plate, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe-410W(GdeE-250) quality B complete all as specified and as directed.

Material and labour mild steel screw bolts (machine made) 11mm to 15mm diametre of neck and length of bolt exc. 10cm and not exc. 15cm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, complete all as specified and as directed.

Material and labour spot welding exc. 2.5cm but n.exc. 5cm in length (thickness of metal to be welded exc. 6 mm but n.exc. 9 mm) for fixing of chain link fencing etc.,complete all as specified and as directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. like interlocking tiles/chequered tiles any pattern laid bedded and pointed in any mortar complete all as specified and as directed.

Material and labour for coloured interlocking paver blocks M-35 grade, 60mm thick of approved pattern and make with grey cement & pigment, compressed over compacted earth complete all as specified and as directed. NOTE :- Quoted rate shall be inclusive of levelling of finished tiled surface with vibrator compacting machine etc.

All as per Sl Item No. 33 above but except interlocking tiles complete all as specified and as directed. NOTE :- Serviceable interlocking tiles as obtained from Sl Item No. 32.00 above shall be re used.

Material and labour for Plain Cement Concrete, (1:4:8), type D2, 100 mm thick using 20mm graded stone aggregates as in sub base complete all as specified and as directed.

Material and labour for sand filling under floors or in foundations including watering and consolidation for laying of interlocking paver blocks complete all as specified and as directed. NOTE :- Mining sand/stone dust shall be of approved quality and should be free from lumps/broken/flaky aggregate.

Material and labour for chequered cement concrete tiles with grey cement and pigment manufactured in rubber moulded finish of size not less than 300 x 300 x 22 to 25 mm thick, set, jointed and pointed in near cement slurry over and including 15 mm thick cement mortar screed in CM (1:6) as in floors complete all as specified and as directed.

All as per Sl Item No. 37.00 above but except tiles including making good of undulated tiles set right and leave all surroundings finished as it is complete all as specified and as directed. NOTE :- Serviceable tiles as obtained from Sl Item No. 32.00 above shall be re used.

Material and labour for Plain Cement Concrete, (1:3:6), type C2, 100 mm thick using 40mm graded stone aggregates as in sub base complete all as specified and as directed.

Material and labour for Kerb stone made out of Plain Cement Concrete, type B1, (1:2:4), using 20 mm graded stone aggregate of cross sectional size 150 mm at bottom and 110 mm at top (tapering at length 210 mm height) with overall height 320 mm and 450 mm in length, surface finished even and smooth laid as directed as in road side kerb, setting in cement mortar 1:6 complete all as specified and as directed.

Material and labour for preparation of new concrete surfaces of any description and applying two coats of synthetic enamel paint of approved tint in different colours if required over a coat of priming paint as in kerb stone painting complete all as specified and as directed.

Material and labour for 75mm thick Plain Cement Concrete, (1:3:6), type C2 using 40 mm graded crushed stone aggregate as in plinth protection with smooth finish by using extra cement complete all as specified and as directed.

Material and labour for cutting out cracks and filling joints solidly with a hot mixture of bitumen and clean dry fine aggregate in 1:1 (by weight) complete all as specified and as directed.

Material and labour one coat of synthetic enamel paint of approved tint over old steel surfaces of any description exc. 10 cm width or grith like security fencing, wire mesh, grills etc including preparation of old surfaces complete all as specified and as directed.

Removing of old debris any type of building material from MoD land to a distance exceeding 5 KM but not exceeding 10 KM complete all as specified and as directed. NOTE :- Debris dispose off site to be decided by the contractor at his own risk, no any additional amount will be paid to contractor if dispose off area/location is far.

Material and labour for preparation of old concrete surfaces by using broom & wire brush for chequered tiles / paver blocks / PCC surface and applying one coat Apex floor gurad paint complete all as specified and as directed.

Material and labour painting lines, dashes, arrows, letters on road pavements and the like n.exc. 10 cm wide with hot thermo plastic road marking material in any colour confirming to min of surface transport (MOST) specification for the road and bridge work 3rd revision, as per manufactures instructions including glass beads (intermix) type I (MOST/BS6008A and provision contained in IRC-35-1997 complete all as specified and as directed. MAKE :- ASIAN PAINTS (primer APCO GRIP and petro reflective thermoplastic road marking material APCO mark)

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards / slabs / blankets, any thickness, including cover fillets complete all as specified and as directed.

Providing and fixing of false ceiling system with fine fissured edge tiles having humidity resistance(RH) of 95% NRC 0.34, light reflectance approx 84%, Thermal conductivity K=0.052- 0.057 W/MK, colour white, fire performance of class-I as per BS 476 part 6&7 in module size 600x600x16 mm thick suitable for green building application with recycled content of 38-41% with Armstrong silhouette profile exposed grid system with 15 mm white flanges incorporating a 6 mm central reveal in white/black colour. Silhouette, main runners & cross Tees to have mitred ends & "birds mouth" notches to provide mitred cruciform junctions. The Tee sections have a galvanizing of 170 grms per sqm & passed through 500 hrs of salt test.The main runner spaced at 1200 mm c/c should be securely fixed to the structural soffit using Armstrong suspension system at 1200 mm maximum c/c. The first / last Armstrong suspension system at the end of each main runner should not be greater than 450 mm from adjacent wall complete all as specified and as directed. MAKE :-Armstrong/Saint Gobain or equivalent

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.

Supply and fix pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. NOTE :- Work shall be carried out for buildings of height upto and above 16 Mtr including all necessary scaffolding.

Supply and fix pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. NOTE :- Work shall be carried out for buildings of height upto and above 16 Mtr including all necessary scaffolding.

Material and labour for polycarbonate sheet of perforated quality 10 mm thick superior quality including necessary jointing provision etc complete all as specified and as directed.

Supply and fix Alluminium composite panel, metalic series of approved shade, the panel shall be of 4mm thick with combination of alluminium skin materials of 0.50mm thick alluminium sheet of alloy grade 1100 H cover material coated on external side with PVDF (Poly vinytedene fluoride) of KYNAR, PVDF coating containing 70% KYNAR 500 resign for antifungal & anti bacterial properties & the central core shall be natural polyethylene(LDPE and HDPE) bonded to aluminium skin on both sides cladding panel to be fixed with extruded alluminium basic frame with angle cleats, weather sealants, rivets, GI brakets all as approved using suitable bolts on walls including necessary accessories, scaffolding, etc., complete for finished item of work and all as per manufacturer's instructions complete all as specified and as directed. NOTE :- (i) Anodised aluminium C section, GI brackets etc shall be measured and paid separately under respective items of this BOQ. (ii) Work shall be carried out for buildings of height upto and above 16 Mtr including all necessary scaffolding.

Supply and fix anadised aluminium 'C' sections of 50x25x1.5mm size as in wall cladding fabricated to panels of size as directed and including necessary corner cleats etc to accommodate alluminium composite panel fixed to masonry walls/ concrete/ any other fabrications, complete all as specified and as directed.

Supply and fix galvanished iron angular bracket, 50x50x3mm size, for fixing the 'C' channel (provn on walls with holding bolt, complete all as specified and as directed.

Providing and fixing factory made uPVC white colour two track two panels sliding glazed window of area above 1.75 sqm upto 2.50 sqm made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc., profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc., after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge.

Note: (i) variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. (ii) For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.

Supply and fix 4 mm thick sheet glass for fixing in uPVC window complete all as specified and as directed.

Supply and fix 50mm wide reflective yellow marking tape for marking on the floor for marking lines and dashes etc complete all as specified and as directed.

Supply and fix in repair solar control film 50 micron thick reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and as directed.

Supply and fix in repairs venetian blinds vertical type 100 mm width with approved fabric and powder coated aluminium fittings such as top rails, metal weight nylon button loops etc to, match with the top rail metal base complete all as specified and as directed.

Supply and fix in repairs aluminium (extruded section body) body door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width & of weight between 61 to 80 kg fixed in repairs complete all as specified and as directed.

Supply and fix brass head, face and spindle only for wall mixer, basin Mixer,sink cock of 15 mm bore any type complete all as specified and as directed.

Supply and fix brass head, face and spindle only for bib cock / pillar cock / stop cock 15 mm bore any type complete all as specified and as directed.

Supply and fix Knob CP only for bib cock / pillar cock / stop cock 15 mm bore any type complete all as specified and as directed.

Supply and fix small fittings galvanised iron medium grade such as socket, elbow, nipple upto 200 mm length, Tee union etc., suitable for 15 mm bore pipe (ISI marked) complete all as specified and as directed.

All as per Ser Item No. 67.00 above but for 20 mm bore pipe.

Supply and fix PVC syphon with handle only for low level flushing cistern of any description size and pattern complete all as specified and as directed.

Supply and fix flushing cistern kit only for cascade type EWC of any pattern and description complete all as specified and as directed.

Supply and fix 32mm dia waste pipe of polythelene, flexible, for wash hand basin or kitchen sink complete all as specified and as directed.

Supply and fix PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

Supply and fix Bib taps CP plated bore dia of pipe in 15 mm, CP brass with fancy type, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and as directed.

Supply and fix brass chromium plated bib cock 2 way double handle with flange screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and as directed.

Supply and fix pillar taps, bore dia of pipe in 15 mm cast copper alloy, with fancy type, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and as directed.

Supply and fix Stop valves / angle valves, bore dia of pipe in 15 mm fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and as directed.

Supply and fix ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed of 20 mm bore, ISI mark embossed on it complete all as specified and as directed.

Supply and fix brass chromium plated grating 100mm dia round fixed on floor / nahani trap fixed with cement mortar complete all as specified and as directed.

Supply and fix health faucet, ABS body, mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect complete all as specified and as directed.

Taking up or down 15mm bore GI pipe and connections laid on roof, wall, ceiling etc. with due care including cleaning properly, for refixing or removal from site complete all as specified and as directed.

Taking up or down 20mm bore GI pipe and connections laid on roof, wall, ceiling etc. with due care including cleaning properly, for refixing or removal from site complete all as specified and as directed.

Supplying and laying of CPVC pipes outer diameter 20mm SDR 11 & Plain CPVC SDR 11 fittings on walls / ceiling or laying in floors complete all as specified and as directed.

Supplying and laying of CPVC pipes outer diameter 25mm SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.

Supply and fixing of brass elbow fixing with CPVC pipes outer diameter 20mm complete all as specified and as directed.

Supply and fixing of brass elbow fixing with CPVC pipes outer diameter 25mm complete all as specified and as directed.

Supply and fixing of female brass threaded adaptor fixing with CPVC pipes outer diameter 20mm complete all as specified and as directed.

Supply and fixing of female brass threaded adaptor fixing with CPVC pipes outer diameter 25mm complete all as specified and as directed.

Supply and fixing of brass Tee fixing with CPVC pipes outer diameter 20mm complete all as specified and as directed.

Supply and fix in repairs vitreous china water closet “Orissa pattern” of size 580 x 440mm pan with 'P' or 'S' trap front or back inlet, foot rests including provn of cement concrete bedding including connections to flushing cistern / pipe and making good disturbed portion to match existing surfaces complete all as specified and as directed.

Supply and fix in repairs Vitreous china wash down water closet pan (pedestal pattern) white including plastic seat cover white / black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device or screws complete all as specified and as directed.

Supply and fix in repairs 10 Litre capacity PVC valve less syphonic action type, flushing cistern, low level with inlet ball valve etc, complete including 32mm dia flush pipe complete all as specified and as directed.

Supply and fix in repairs wash basin of size 550x400mm, vitreous china (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but including waste coupling of PTMT, half or full threaded (Minimum weight 32mm- 45gms/40mm-60 gms) complete all as specified and as directed.

Supply and fixing for single towel rail 600mm long, chromium plated, 18/20mm dia and drilling on wall and fixing with screws etc complete all as specified and as directed.

Supply and fix in repairs of 600 mm x 450 x 4 mm thick looking mirror mounted on 3 mm thick PVC frame and fixed to wooden plugs with CP screws and washers complete all as specified and as directed.

Dismantling old unserviceable PVC water tanks and removing to store upto 500 Ltr Capacity complete all as specified and as directed.

Dismantling old unserviceable PVC water tanks and removing to store upto 1000 Ltr Capacity complete all as specified and as directed.

Dismantling old unserviceable PVC water tanks and removing to store upto 2000 Ltr Capacity complete all as specified and as directed.

Supply and fix multi layered rotational moulded polythelene water storage tanks, of capacity 500 litres, cylindrical vertical with closed top, ISI mark embossed on it, hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed.

Supply and fix multi layered rotational moulded polythelene water storage tanks, of capacity 1000 litres, cylindrical vertical with closed top, ISI mark embossed on it, hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed.

Supply and fix multi layered rotational moulded polythelene water storage tanks, of capacity 2000 litres, cylindrical vertical with closed top, ISI mark embossed on it, hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed.

Supply and fix Gun-metal, globe or gate valves, with iron wheel head, suitable for 15mm bore dia of pipe, screwed both ends for iron pipe and fixed complete all as specified and as directed.

Taking down rain water pipes (any size or pattern) including all fittings bends etc complete all as specified and as directed.

Supply and fix 75mm bore PVC (SWR) pipes single socketed, type 'B' in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

Supply and fix 110mm bore PVC (SWR) pipes single socketed, type 'B' in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

Supply and fix 160mm bore PVC (SWR) pipes single socketed, type 'B' in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

Supply and fix 75mm bore PVC (SWR) bends type 'B' any radius complete all as specified and as directed.

Supply and fix 75mm bore PVC (SWR) junction single, (Single T) equal or unequal type 'B' complete all as specified and as directed.

Supply and fix 75mm bore PVC (SWR) couplers type 'B' complete all as specified and as directed.

Supply and fix 110mm bore PVC (SWR) bends any radius type 'B' complete all as specified and as directed.

Supply and fix 110mm bore PVC (SWR) couplers type 'B' complete all as specified and as directed.

Supply and fix 75mm bore PVC (SWR) floor trap, plain with grating type 'B' including jointing with solvent cement complete all as specified and as directed.

Demolition of Reinforced cement concrete/ cutting of roads of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Material and labour for pre cast reinforced cement concrete 1:2:4 type B-1 using 20mm graded aggregate as in cover slabs for man holes, water tanks etc., set in CM (1:4) complete all as specified and as directed.

Material and labour TMT steel bars 10mm dia and over as in reinforcement cut to length bent to shape required for hooping of column hooking ends spirally and binding with MS wire annealed not less than 0.90mm dia complete all as specified and as directed.

Material and labour 25mm thick Plain Cement Concrete 1:2:4 type B-0 using 12.5mm graded aggregate as in bedding, finished fair and even complete all as specified and as directed.

Supply and fix in repairs PVC tank cover suitable for PVC tanks of capacity 500 to 10000 Ltrs including necessary fixing arrangements etc complete as in repairs, ISI mark embossed on it, complete all as specified and as directed.

Providing and fixing 15mm bore CP brass wash basin mounted type swan neck complete all as specified and as directed.

Removal of air lock / blockage of water in GI tubing 15 mm / 20mm bore cleaning the pipe or fittings etc and re-fixing the same in position complete all as specified and as directed.

Petty repairs / adjustment or changing of washer / syphon etc for high level or low level flushing cistern and making functional complete all as specified and as directed.

Supply and fix in repairs PVC syphon with handle complete for low level flushing cistern of any description size and pattern complete all as specified and as directed.

Supply only Elbow, Tee, Collar, union of size 20 mm dia complete all as specified and as directed.

Supply only Elbow, Tee, Collar, union of size 25 mm dia complete all as specified and as directed.

Supply only plastic water closet seat, closed pattern with flat bottom and cover and mild steel chromium plated or hinging device complete all as specified and as directed.

Supply and fix in repairs angle valve two way 15mm bore chromium plated screwed down high pressure with capstan head and flange complete all as specified and as directed.

Supply and fix in repairs Bib taps 15 mm bore standard of PTMT high pressure screwed for iron pipe and fixed minimum complete all as specified and as directed.

Supply only Chromium plated bib tap cast copper alloy 15mm bore pipe fancy type any description complete all as specified and as directed.

Supply and fix in repairs brass chromium plated bottle traps for WHB/urinal with inlet and outlet screwed for pipe including necessary packing union and cap 40 mm bore/suitable of trap complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Material and labour Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry over and including 15 mm thick screed bed in CM (1:4) and pointed in white or coloured cement to match complete all as specified and as directed.

Material and labour for glazed coloured ceramic tiles as in vertical surfaces for wall tiles of size 450 x 300 x 7 mm thick as in dados, set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles with joint free over and including 10mm thick backing coat in CM (1:3) complete all as specified and as directed.

Material and labour for Granite 20 mm thick of any type work ( table rubbed and polished) as in cooking platforms and like ,in cement mortar (1:4) including pointing in white cement (1:2), using marble dust with admixture of pigment to match the shade of granite stone including cutting and polishing laid on and including 15 mm thick screed bed in CM (1:4) set and jointed complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

Material and labour for vitrified ceramic coloured tiles light shade 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick CM (1:6) screed bed complete all as specified and as directed.

All as per Ser item No. 133.00 above but as in skirting over and including 10 mm thick rendering on brick work or concrete surface as in backing coat of cement mortar (1:4) complete all as specified and as directed.

Material and labour for Machine cut Kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, laid over and including screed bed 15 mm thick in CM (1:6) complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off the shutter from the frame) of area n.exc 1.50 Sqm each and removing from site complete all as specified and as directed.

All as per Sl Item No. 136.00 above but area exc 1.50 Sqm but n.exc 4.00 Sqm

Taking down shutters of area exc 1.00 sqm but not exc. 2 Sqm each and removing to store complete all as specified and as directed.

Taking down shutters from frame area exc. 1 sqm not exc 2 sqm each resecuring or easing and adjusting and refixing in same opening and finish the surfaces to match with existing surfaces complete all as specified and as directed.

All as per Ser Item No. 139.00 above but area exc. 2 Sqm each

Supply and fix in opening solid PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square bar tube, as per specification & drg complete all as specified and as directed.

Supply and fix factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing.

Supply and fix pressed steel frames 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed.

Supply and fix factory made 35mm thick IInd class hard wood glazed or skelton shutter open rebated prepared to receive glass, gauge etc. without sash bars edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass gauge etc, size of members of shutters as specified in SSR Part-I, section 8, clause 8.24(a) complete all as specified and as directed.

Supply and fix 35 mm thick 2nd class hard wood factory made plain framed panelled, door shutter (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces, the size of rail and stile as per IS: 1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and directed by Engineer-in-Charge.

Supply and fix brass mortice lock, vertical type, size 100 mm, 4 levers, fixed as in repairs complete all as specified and as directed.

Supply and fix mild steel butt hinges medium weight of size 100 mm complete all as specified and as directed.

Supply and fix aluminium anodised barrel tower bolts of extruded section, 150 mm long complete all as specified and as directed.

Supply and fix aluminium anodised cast type handles 150mm long complete all as specified and as directed.

Supply and fix aluminium alloy, anodised, sliding door bolt with hasp, staple bolt type and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections 300 mm long complete all as specified and as directed.

Supply and fix door stopper of rubber and aluminium alloy body, 150 mm size complete all as specified and as directed.

Supply and fix in repairs stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm with stainless steel wire staples complete all as specified and as directed.

Supply and fix in repairs 300mm long, Mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

Supply and fix in repair Aluminium (Extruded Section body) body door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width & of weight between 61 to 80kg fixed in repairs complete all as specified and as directed.

Supply and fix in repairs aluminium anodised barrel towel bolts of extruded section of length 150 mm complete all as specified and as directed.

Supply and fix in repairs 300 mm long Aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections complete all as specified and as directed.

Supply and fix in repairs mild steel butt hinges medium weight cold rolled mild steel of size 100 mm to existing frame complete all as specified and as directed.

Supply and fix in repairs aluminium extruded alloy handles fabricated type anodised of size 150 mm complete all as specified and as directed.

Supply and fix in repairs 150 mm floor door stopper of aluminium alloy , with hard down steel spring complete all as specified and as directed.

Material and labour double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed.

Dismantling of aluminium partition of any size and any description complete all as specified and as directed.

Dismantling of aluminium doors / windows of any size and any description complete all as specified and as directed.

Supply and fix powder coated aluminium frame for partition, doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

Supply and fix anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed.

Supply and fix powder coated aluminium window and ventilator shutters, side hung / sliding type without sash bar, aluminium section weighing not less than 0.55 Kg/ RM including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1 No.), hinges type B-21 100 mm long (2 Nos.), suitable handle (1 No.) complete all as specified and as directed.

Material and labour 9 mm thick prelaminated particle board, interior grade, prelaminated both sides with decorative choice lamination, fixed with screws to timber/ aluminium frame work in cup board shutters / aluminium portions etc., complete all as specified and as directed.

Supply and fix frosted glass on one side, 4.8 mm thick, ordinary quality and glazing with rubber beadings suitable for aluminium frame work, in square exc. 0.5 sqm in each pane complete all as specified and as directed.

Supply and fix 4 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each pane complete all as specified and as directed.

Supply and fix 4 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.50 sqm in each pane complete all as specified and as directed.

Re securing glass of any description in existing metal frames, glazed with putty / beads including removing loose / decayed putty / beads, painting / oiling one coat on rebates, grooves, re puttying and painting / oiling puttied surfaces to match existing work complete all as specified and as directed. NOTE : New length of frame re puttied shall be measured.

Supply and fix in repairs for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement.

Supply and fix fixing black / golden colour solar control film 25 micron reflective type sticked to glass panes as per instruction of manufacturer.

Supply and fix 12mm thick wave free toughened clear glass with stainless steel fitting, fish mouth channel in bottom and top as per design with and including provision of all other necessary fixture and accessories, complete all as specified and as directed.

Srinivas G Civil Contractor (BID ID -3428911)

G K CONSTRUCTIONS (BID ID -3429671)

VAJRA CONSTRUCTIONS (BID ID -3424281)

manoj trading agencies (BID ID -3429616)

G D ENTERPRISES (BID ID -3430181)