Construction of New 33 KV Line

Amount

Part A (Materials Provided by contractor)

33 KV ‘XLPE’ C/J Kit 3x300mm² Outdoor

33 KV ‘XLPE’ C/J Kit 3x300mm ST. through

Number Plate

Danger Board with Clamp

Barbed wire

Bolts, Nuts, & Washers

Top channel clamp with nut bolt for ST Pole with nut bolt by 50x8 mm MS flat Iron make

clamp for ST Pole 11mtr as stud pole with nut bolt by 50x8 mm MS flat Iron make

Stay Clamp for ST Pole with Nut and Bolt by 50x8 mm MS Flat Iron make.

Stay Rod 20x1800 mm

Stay wire 7/8 SWG

MS Earthing Rod 20x2500 mm

P.G. Clamp for DOG

M.S. Angle Iron 65x65x6mm bracing

33 KV M.S. bracing Angle clamp with nut bolt for ST Pole with nut bolt by 50x8 mm MS flat Iron make

33 KV. Top channel (125x65mmX3200 mm (10.7 Kg/m)

GI Wire 5 mm

33 KV Polymer Disc Insulator (B&S Type)

33 KV Polymer Disc fitting

Extra angle for cable support

Clamp for extra angle support

Al. paint

Red oxide paint

PART- B WORK (DETAILS OF WORK) Shifting, Loading Carriage & Unloading of following materials from store centre Gorakhpur to work site.

33 KV Line Isolator

33 KV Line Isolator Structure

33 KV ‘XLPE’ Cable 3x300mm²

ST Pole 11 M Long

ACSR Dog Conductor

ST Pole 9 M

Erection of Double pole structure on 11 mtr ST Pole for One side O/H and One side U/G line including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete) .

Erection of Four pole structure on 11 mtr ST Pole for One side O/H and One side U/G line including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete) .

Erection of Double pole structure on 9 mtr ST Pole for only cable Rising including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete) .

Erection of Single pole as stud pole structure on 11mtr ST Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (clamps with bolt and nut, Aluminium paint, red oxide paint etc. complete).

Laying, spreading, lifting and final sagging of 3 phases of ACSR Dog conductor in accordance with profile and sag chart including binding, Jumpering and fixing of P.G. Clamp as per requirement in 03 Nos. conductor in parallel.

Laying of 33 KV 3x300 mm² ‘XLPE’ cable(D/C) by digging pit in Proper size (1.2M depth x1.2 M wide) below ground level by fixing bricks(4½˝) on both side of trench wall and 9˝ brick work at the centre of the trench along the cable. Fixing brick slab on top after filling sand around both the cable including cost of bricks.

Rising of 33KV ‘XLPE’ cable in air after providing 6” dia. M.S pipe 3 m long Complete work.

Providing Special GI Pipe Earthing Complete for 33 KV ‘XLPE’ C/J Kit.

Jointing charges of 33 KV ‘XLPE’ C/J Kit 3x300mm² Outdoor& St. Through

Grouting of stay rods (20 x 1800) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening & nozzling of stay wire with stay rod with the poles of required tension.

Erection of Line Isolator Structure and install Line Isolator and earthing complete work.

Extra cost for drilling horizontal hole 3 Mtr below the road & inserting 110” dia. HDPE Pipe for passing of 33 KV XLPE cable 3x300 mm² for Road /Pulliya Crossing at different places in the path of Laying of cable. Complete materials with work Provided by contractor (Including Railway crossing)

M/s Anil kumar singh

M/s S.B.S. Traders