REPAIR / MAINT TO TILING, FLOORING, PLAIN CEMENT CONCRETE WORKS, SUNKEN PORTION, JOINERY, GLAZING WORK, PLASTERING WORK, PLUMBING WORK, SANITARY FITTINGS, GI TUBING, VENT CI/PVC PIPES AND PLINTH PROTECTION AT UPPER LEIMAKHONG MIL STN, ENGR REGT, CENT

Amount

B/R work

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and pre-cast concrete articles and removing unserviceable materials from site of work complete all as specified and directed.

M&L for brick work with subclass ‘B’ bricks, (locally available best quality) old size bricks straight or curved on plan exc 6 m means radius, built in cement mortar (1:6) complete all as specified and directed.

M & L for brick work with sub class ‘B’ brick, old size (locally available best quality) straight or curved on plan to any radius in half brick thick wall built in cement mortar (1:6) complete all as specified and directed.

Demolition of reinforced cement concrete in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work.complete all as specified and directed.

M & L TMT mild steel bars 6mm to 8 mm dia and over ,cut to length,bend to shape required, including cranking ,bending spirally for hooping for columns,hooking ends and binding with the including mild steel wire(annealed) not less than 0.9mm dia or securing with clips.complete all as specified and directed.

M&L for RCC M-25 (Nominal mix) using 20mm graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work n exc 200mm thick (horizontal or sloping) rough finished surface of concrete complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc, including raking out joints hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L for rendering 15mm thick on other than fair faces of brick work in cement mortar (1:4) using water proofing compound @2% by weight of cement as per manufacture instruction and finishing the surface even and smooth without using extra cement complete all as specified & directed.(Using Dimapur Sand) [Note: WPC will be measured and paid separately)

M & L for rendering 15mm thick plaster in cement mortar (1:6) on fair faces brick work or concrete surfaces finish the surfaces even and smooth without using extra cement complete all as specified and as directed. (using Dimapur Sand)

Supply of Integral water proofing Compound ISI marked.

M & L for rendering 5mm thick plaster in cement mortar (1:3) on fair faces of brick work or on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. (Using Dimapur Sand)

Demolition of cement concrete (unreinforced) in ground floor and pavings not exc 15 cm thick thickness below or above ground level complete all as specified and directed.

M&L for 75mm thick PCC M-10 grade (Nominal Mix) using 40mm graded crushed stone aggregate as in plinth protection finishing surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade 'A' complete all as specified and directed

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, and brushing neat cement slurry with 3 kg of cement per qm. Metre etc. complete as specified and directed.

M&L coloured non-skid ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm as in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as directed.

M&L coloured non-skid ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm as in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for 75 mm thick PCC M15 grade (Nominal mix) using 40mm graded crushed stone aggregate as in sub base complete all as specified and directed.

M&L 25mm thick plain cement concrete M15 grade (Nominal mix) using 20mm graded crushed stone aggregateas in floor, finishes even and fair to receive floor tiles complete all as specified and directed.

S&F Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile including 10mm thick cement mortar backing in CM (1:4) complete all as specified and directed.

M&L coloured non-skid joint free ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm as in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick cement mortar backing in CM (1:3) complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors laid bedded and pointed in any mortar complete all as specified and directed.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed..

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but not exc. 4 sqm each and removing all unserviceable materials from site complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sq. m each and removing all unserviceable materials from site complete all as specified and directed.

Taking down shutters of any description exc. 1 sqm and not exc. 2 sqm each and removing all unserviceable materials from site complete all as specified and directed.

M&L for taking down and refixing in same opening wood shutter exc 1 sqm but not exc 2.00 sqm including easing & adjusting and refixing with same hardware etc complete all as specified and directed.

S&F 2nd class hardwood plain solid straight chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 25mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides for cupboard complete all as specified and directed.

M&L for 35mm thick well seasoned 2nd class hardwood glazed and skeleton shutter open rebated and prepared to receive glass etc. (without sash bar) edges of framing plain chamfered or rounded fitted with cut and mitred bead for securing gauge etc size of members of shutter as specified in SSR Part-I section 8 clause 8.24(a) complete all as specified and directed.

S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F in door or window frame of any description with aluminum sections, coloured powder coating not less than 50micron, and fixing in positions including all necessary cleats, lugs, beading, and jointing arrangements, complete all specified & directed.

S& F aluminium anodised sliding window, 3 track system, fully glazed fitted with one side visible glass of 5.5mm thick, shutter frame size 44 x 24 x 1.8mm including chowkat of size 80 x 40 x 1.8mm and sliding fly proof shutter (using stainless steel wire cloth of gauge 0.50mm dia and aparture 1.18mm) with three track , including aluminium grill on out side throughout & providing necessary jointing cleats ,glazing clips,rubber packing, anodised aluminium snap beading,handle,screw complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed.

M&L for MS work as in framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F sheet glass 4.8mm thick ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each pane complete all as specified and as directed.

S & F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S & F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Hacking out old broken glass exc 1.5 sqm (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F sheet glass 3mm thick, ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane complete all as specified and as directed.

S & F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor with 140 mm overall lenth of cover plate.complete all as specified and directed.

S&F 75mm long butt hinges medium weight cold rolled mild steel complete all as specified and directed.

S&F 100mm long butt hinges medium weight cold rolled mild steel complete all as specified and directed.

S&F 150mm long aluminium anodised of extruded section barrel tower bolts complete all as specified and directed.

S&F 200mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 150mm long alumiunium handles cast type anodised complete all as specified and directed.

S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed 300mm long complete all as specified and as directed.

S&F MS 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete fixed in floor complete all as directed.

S&F 50mm long butt hinges medium weight cold rolled mild steel complete all as specified and directed.

S & F 2nd class hard wood small fittings such as brackets of any type ,latch and hinge block ,shaped door and window stops and the like including all necessary labours articles n exe 200 cu.cm each complete all as specified and directed.

S & F mild steel flat iron as in hold fast including screwing or welding complete all as specified and directed

M&L for PCC M10 grade (Nominal mix) using 20mm graded stone agg as in hold fast etc. complete all as specified & directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

S&F 18/19mm thick particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work complete all as specified and directed

S&F 0.90mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed

S & F 30 mm wide continuous (piano) hinges,mild steel, bright finish or electrogalvanised complete all as specified and directed.

S & F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed.

S&F magnetic door catches of standard size, mild steel body and striking plate including letting in and fixed complete all as specified and directed.

S&F in repair vitreous china squatting pan “Orissa pattern of size 580x440mm white, back inlet and integral foot rests (excluding flushing cistern and flush pipe) but including lime concrete bedding complete all as specified and directed.

S&F, in repair light coloured vitreous china WHB white oval shape of 550mmx400mm (minimun) on new brackets excluding taps, 32mmdia waste china & plug including bracket etc complete all as specified and directed.

S&F in repairs pillar taps, ISI marked cast copper alloy chromium plated, with capstan heads, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks for iron pipes for 15 mm bore dia of pipe and fixed complete all as specified and directed.

S&F in repairs PVC low level flushing cistern, white, 10 ltrs capacity, valveless, syphonic action type including all fittings and flush pipe, PVC connection pipe 600mm long 15mm bore with brass heads and washers all as specified and directed.

S&F 75mm dia PVC (SWR) floor trap, plain with grating including setting and jointing with solvent cement complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S & F in repairs bore bib taps, ISI marked cast copper alloy, chromium plated fancy type screwed down, screwed for iron pipe or for brass ferule for 15 mm bore dia of pipe complete all as specified and directed.

S&F in repair stop valves(ISI marked) cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) for 15mm bore pipe complete all as specified and directed.

S&F in repair for brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union any colour for fixing with 15mm pipe complete all as specified and directed.

S&F in repairs brass chromium plated, 600mm long between flanges tubular towel rail , 20mm dia, D type. fixed with and including chromium plated brass screws and wooden plastic cleats, complete all as specified and directed.

S&F stainless steel sink with drainage board 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm. (Make: Blue Star Model No BSSBSD-52 or equivalent in Jain Brothers / Prayag/ Cera)

S&F as in replacement stainless steel plate rack of size 24" x 36" x 10" complete all as specidfied and directed. (Make: Blue Star cat No KPR-312 or equivalent in Nirali/Jain Brothers/Prayag)

S&F in repair shelf of PTMT fixed with and including chromium plated brass screw and wooden/plastic cleats ( min weight 300 gms) complete all as specified and directed.

Taking up or down 15mm dia of steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and directed.

S&F GI tubing 15mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Refixing of 15mm steel tubing and including cleaning in positon (walls, ceiling and floor etc complete all as specified and directed.

Cutting chases, pinning in, making good to facings of brick walls where required and pointing in CM 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed water conduit wiring, etc., and making good, cutting not exc 10 cm girt complete all as specified and directed.

Taking up or down 20mm dia of steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and directed.

S&F tube medium grade galvanized with all fittings and fixed to walls or laid in floors of 20mm bore including cutting chasing in walls etc. complete all as specified and directed.

Refixing of 20mm steel tubing and including cleaning in positon (walls, ceiling and floor etc complete all as specified and directed.

S&F in repair 20mm bore gun metal, globe or gate valves, ISI marked, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to wall as in waste/soil pipe complete all as specified and directed (Make : KISHAN/ SUPREME /PRINCE /ANANT /ORIPLAST)

S&F 75mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to wall as in waste/soil pipe complete all as specified and directed (Make : KISHAN/ SUPREME /PRINCE /ANANT /ORIPLAST)

S&F 110 mm dia PVC (SWR) bends of any radius complete all as specified and directed (Make : KISHAN / SUPREME / PRINCE / ANANT / ORIPLAST)

S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F 75 mm dia PVC (SWR) bends of any radius complete all as specified and directed (Make : KISHAN / SUPREME / PRINCE / ANANT / ORIPLAST)

M&L for PVC (SWR) vent cowl of bore 110mm complete all as specified and directed.(Make : KISHAN/ SUPREME /PRINCE /ANANT /ORIPLAST)

S & F in repairs fancy type decorative Drapary rod of 20mm dia for window and doors with curtain rings and decorative doom holders fixed to wall with screw complete all as specified and directed.

M&L for cement concrete (1:2:4) type B1 using 20mm graded crushed stone aggregate as in coping, benching, padding, back filling in chowk complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed.

Demolition of cement concrete of any description in any position, concrete filling in sunken floor complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and directed.

M&L for 15mm thick rendering to sides and bottom of sunken slab in CM 1:3 with water proofing compound, finishing the surfaces even and smooth without using extra cement complete all as specified and directed. (WPC shall be measured seperately)

M&L 30mm thick PCC M-15 grade (Nominal Mix) using 12.5mm graded crushed stone aggregate in sunken floors complete all as specified and directed.

S&F GI spouts 40mm dia projecting ateastn 20 cm clear of the wall complete all as specified and directed.

M&L for applying two coats of hot bitumen 85/25 grade @ 1.70 Kg/Sqm over vertical surfaces and floor of sunken slab after laying all CI connection branch pieces etc complete all as specified and directed.

M&L PCC 1:7:12 type F 2 with bricks as in filling of sunken slab after laying carrying out required tests for CI pipes joints complete all as specified and directed.

M&L for preparation of surfaces plastered or unplastered new surface on wall and applying two coats of oil bound distemper complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed.

M&L for preparation of newly plastered surface of ceiling and applying three coats of white wash complete all as specified and directed.

M & L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer on wooden surfaces complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for chequered cement concrete tiles 30cm x 30cm x 25mm thick set jointed with grey cement and pigments and pointed in neat cement slurry in floors including 20mm thick sreed bed in CM 1:6 complete all as specified and directed.

Disconnecting existing tanks of capacity exc. 250 & n exc. 500 ltrs , setting aside (or lowering if required) for repairs, cleaning, etc. and hositing if required reconnecting and re-fixing in position complete all as specified and directed.

S & F water storage tank ISI marked of capacity 500 ltrs hoisted and fixed in position including ball brass valves of 20mm dia, high pressure with polythene float and fly nut complete, screwed for iron pipe of brass ferrule and fixed in 20mm bore GI tube etc complete all as specified and directed.

M/s RS Enterprises & Supplier

M/S PRADEEP CONSTRUCTION

L BINOD CONSTRUCTION CO

MAURYA CONSTRUCTIONS

M/S N JADUMANI SINGH

M/s Ritz Marketing

M/S BIJOYA LAXMI ENTERPRISE