Re-oragansiation of 220 v Oh line for illumination around param pujya guru Satnam Bhawan exterior campus situated at Sharda colony under SDOCM

Amount

Supply & providing oof PCC pole 8 mtr

Transporting of pole from manufacturer to store and from store to working site

Erection of RCC/ PCC pole of following length in brick ballast and ramming the foundation, finishing with 150mm thick cement concrete(1:3:6)layer on top with including excavation and refilling etc as required Above 6.5 metre and upto 8.0 metre

Supplying and erection of100mm X80mm pin insulator complete with G. I. Spindle and nuts etc. as required.

Supplying and erection of galvanised 'D' iron clamps complete with shackle insulator (75mm X 90mm), G.I.bolts,nuts and washers, coach screws etc. asrequired

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per meter) cross arm for 2 wire overhead line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finished paint as required (+) Erection of angle iron/channel iron cross arm on wood/ RCC/ PCC/ steel tubular/ rail pole etc. as required

Supplying and erection of stay set complete (galvanized) with 19/ 20 mm dia X 1.8 meters long stay rod, anchor plate of size 45 cm X45cmX7.5mm, thimble, stay clamps, turn buckle (20mmX60 cm), 7/ 3.15mm diaG.I.stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required.

Supply and erection of stay wire with insulator binding etc as required

Erection of cradle guard as required

Supply of nuts & bolts with washer of different size as per requirement

Erection of ACSR conductor of 7/3.35 mm to 7/4.00 diameter and above including binding etc. asrequired.40x8x2=640mx0.214kg/m

Supply & providing of GI pipe for fixing of light

Supply & providing of GI calmp holder for light fixing

3/20Twin core copper wire conductor roof for fixing of light & connection in main switch

Providing and fixing following capacity TP&N disconnect or fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections etc. as required 32 Amp TP&N

Labour cost for fixing of light set at the top of pole

Supplying & fixing of board for fixing of main swithch

Total impact of GST for the purpose of CTC

M/S SHIV PARBATI ENTERPRISES

M/S UPENDRA ELECTRICAL